Merge tag 'soc-arm-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC updates from Arnd Bergmann:
 "The Oxford Semiconductor OX810/OX820 'Oxnas' platform gets retired
  after the ARM11MPcore processor keeps causing problems in certain
  corner cases. OX820 was the only remaining SoC with this core after
  CNS3xxx got retired, and its driver support was never completely
  merged upstream. The Arm 'Realview' reference platform still supports
  ARM11MPCore in principle, but this was never a product, and the CPU
  support will get cleaned up later on.

  Another series updates the mv78xx0 platform, which has been similarly
  neglected for a while, but should work properly again now.

  The other changes are minor cleanups across platforms, mostly
  converting code to more modern interfaces for DT nodes and removing
  some more code as a follow-up to the large-scale platform removal in
  linux-6.3"

* tag 'soc-arm-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
  ARM: mv78xx0: fix entries for gpios, buttons and usb ports
  ARM: mv78xx0: add code to enable XOR and CRYPTO engines on mv78xx0
  ARM: mv78xx0: set the correct driver for the i2c RTC
  ARM: mv78xx0: adjust init logic for ts-wxl to reflect single core dev
  soc: fsl: Use of_property_present() for testing DT property presence
  ARM: pxa: Use of_property_read_bool() for boolean properties
  firmware: turris-mox-rwtm: make kobj_type structure constant
  ARM: oxnas: remove OXNAS support
  ARM: sh-mobile: Use of_cpu_node_to_id() to read CPU node 'reg'
  ARM: OMAP2+: hwmod: Use kzalloc for allocating only one element
  ARM: OMAP2+: Remove the unneeded result variable
  ARM: OMAP2+: fix repeated words in comments
  ARM: OMAP2+: remove obsolete config OMAP3_SDRC_AC_TIMING
  ARM: OMAP2+: Use of_address_to_resource()
  ARM: OMAP2+: Use of_property_read_bool() for boolean properties
  ARM: omap1: remove redundant variables err
  ARM: omap1: Kconfig: Fix indentation
  ARM: bcm: Use of_address_to_resource()
  ARM: mstar: remove unused config MACH_MERCURY
  ARM: spear: remove obsolete config MACH_SPEAR600
  ...

39 files changed, 167 insertions, 345 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d64ad0fe6c0c..f52afb74e6d9 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -497,8 +497,6 @@ source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
-source "arch/arm/mach-oxnas/Kconfig"
-
 source "arch/arm/mach-pxa/Kconfig"
 
 source "arch/arm/mach-qcom/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 485a439e22ca..547e5856eaa0 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -203,7 +203,6 @@ machine-$(CONFIG_ARCH_MSTARV7)		+= mstar
 machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
 machine-$(CONFIG_ARCH_NPCM)		+= npcm
 machine-$(CONFIG_ARCH_NSPIRE)		+= nspire
-machine-$(CONFIG_ARCH_OXNAS)		+= oxnas
 machine-$(CONFIG_ARCH_OMAP1)		+= omap1
 machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
 machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index da30a4d4f35c..309b74783468 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -494,7 +494,7 @@ static int locomo_probe(struct platform_device *dev)
 	return __locomo_probe(&dev->dev, mem, irq);
 }
 
-static int locomo_remove(struct platform_device *dev)
+static void locomo_remove(struct platform_device *dev)
 {
 	struct locomo *lchip = platform_get_drvdata(dev);
 
@@ -502,8 +502,6 @@ static int locomo_remove(struct platform_device *dev)
 		__locomo_remove(lchip);
 		platform_set_drvdata(dev, NULL);
 	}
-
-	return 0;
 }
 
 /*
@@ -514,7 +512,7 @@ static int locomo_remove(struct platform_device *dev)
  */
 static struct platform_driver locomo_device_driver = {
 	.probe		= locomo_probe,
-	.remove		= locomo_remove,
+	.remove_new	= locomo_remove,
 #ifdef CONFIG_PM
 	.suspend	= locomo_suspend,
 	.resume		= locomo_resume,
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index f5e6990b8856..aad6ba236f0f 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -1123,7 +1123,7 @@ static int sa1111_probe(struct platform_device *pdev)
 	return __sa1111_probe(&pdev->dev, mem, irq);
 }
 
-static int sa1111_remove(struct platform_device *pdev)
+static void sa1111_remove(struct platform_device *pdev)
 {
 	struct sa1111 *sachip = platform_get_drvdata(pdev);
 
@@ -1135,8 +1135,6 @@ static int sa1111_remove(struct platform_device *pdev)
 		__sa1111_remove(sachip);
 		platform_set_drvdata(pdev, NULL);
 	}
-
-	return 0;
 }
 
 static struct dev_pm_ops sa1111_pm_ops = {
@@ -1155,7 +1153,7 @@ static struct dev_pm_ops sa1111_pm_ops = {
  */
 static struct platform_driver sa1111_device_driver = {
 	.probe		= sa1111_probe,
-	.remove		= sa1111_remove,
+	.remove_new	= sa1111_remove,
 	.driver		= {
 		.name	= "sa1111",
 		.pm	= &sa1111_pm_ops,
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index e74c5bfdc6d3..9018c7240166 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -236,7 +236,7 @@ err_ioremap:
 	return ret;
 }
 
-static int scoop_remove(struct platform_device *pdev)
+static void scoop_remove(struct platform_device *pdev)
 {
 	struct scoop_dev *sdev = platform_get_drvdata(pdev);
 
@@ -246,13 +246,11 @@ static int scoop_remove(struct platform_device *pdev)
 	platform_set_drvdata(pdev, NULL);
 	iounmap(sdev->base);
 	kfree(sdev);
-
-	return 0;
 }
 
 static struct platform_driver scoop_driver = {
 	.probe		= scoop_probe,
-	.remove		= scoop_remove,
+	.remove_new	= scoop_remove,
 	.suspend	= scoop_suspend,
 	.resume		= scoop_resume,
 	.driver		= {
diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c
index 185335843bbd..f236e12d7a59 100644
--- a/arch/arm/mach-bcm/bcm_kona_smc.c
+++ b/arch/arm/mach-bcm/bcm_kona_smc.c
@@ -31,34 +31,23 @@ static const struct of_device_id bcm_kona_smc_ids[] __initconst = {
 int __init bcm_kona_smc_init(void)
 {
 	struct device_node *node;
-	const __be32 *prop_val;
-	u64 prop_size = 0;
-	unsigned long buffer_size;
-	u32 buffer_phys;
+	struct resource res;
+	int ret;
 
 	/* Read buffer addr and size from the device tree node */
 	node = of_find_matching_node(NULL, bcm_kona_smc_ids);
 	if (!node)
 		return -ENODEV;
 
-	prop_val = of_get_address(node, 0, &prop_size, NULL);
+	ret = of_address_to_resource(node, 0, &res);
 	of_node_put(node);
-	if (!prop_val)
+	if (ret)
 		return -EINVAL;
 
-	/* We assume space for four 32-bit arguments */
-	if (prop_size < 4 * sizeof(u32) || prop_size > (u64)ULONG_MAX)
-		return -EINVAL;
-	buffer_size = (unsigned long)prop_size;
-
-	buffer_phys = be32_to_cpup(prop_val);
-	if (!buffer_phys)
-		return -EINVAL;
-
-	bcm_smc_buffer = ioremap(buffer_phys, buffer_size);
+	bcm_smc_buffer = ioremap(res.start, resource_size(&res));
 	if (!bcm_smc_buffer)
 		return -ENOMEM;
-	bcm_smc_buffer_phys = buffer_phys;
+	bcm_smc_buffer_phys = res.start;
 
 	pr_info("Kona Secure API initialized\n");
 
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index 51a247ca4da8..966a0995e047 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -50,11 +50,13 @@ void __init exynos_sysram_init(void)
 	struct device_node *node;
 
 	for_each_compatible_node(node, NULL, "samsung,exynos4210-sysram") {
+		struct resource res;
 		if (!of_device_is_available(node))
 			continue;
-		sysram_base_addr = of_iomap(node, 0);
-		sysram_base_phys = of_translate_address(node,
-					   of_get_address(node, 0, NULL, NULL));
+
+		of_address_to_resource(node, 0, &res);
+		sysram_base_addr = ioremap(res.start, resource_size(&res));
+		sysram_base_phys = res.start;
 		of_node_put(node);
 		break;
 	}
diff --git a/arch/arm/mach-exynos/suspend.c b/arch/arm/mach-exynos/suspend.c
index 3bf14ca78b62..6d5d7696aaf7 100644
--- a/arch/arm/mach-exynos/suspend.c
+++ b/arch/arm/mach-exynos/suspend.c
@@ -667,7 +667,7 @@ void __init exynos_pm_init(void)
 		return;
 	}
 
-	if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) {
+	if (WARN_ON(!of_property_read_bool(np, "interrupt-controller"))) {
 		pr_warn("Outdated DT detected, suspend/resume will NOT work\n");
 		of_node_put(np);
 		return;
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index ebc4339b8be4..5909088d5482 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -275,7 +275,7 @@ void __init imx_gpc_check_dt(void)
 	if (WARN_ON(!np))
 		return;
 
-	if (WARN_ON(!of_find_property(np, "interrupt-controller", NULL))) {
+	if (WARN_ON(!of_property_read_bool(np, "interrupt-controller"))) {
 		pr_warn("Outdated DT detected, suspend/resume will NOT work\n");
 
 		/* map GPC, so that at least CPUidle and WARs keep working */
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index c9d7c29d95e1..7f6200925752 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -79,7 +79,7 @@ static void __init imx6q_enet_phy_init(void)
 static void __init imx6q_1588_init(void)
 {
 	struct device_node *np;
-	struct clk *ptp_clk;
+	struct clk *ptp_clk, *fec_enet_ref;
 	struct clk *enet_ref;
 	struct regmap *gpr;
 	u32 clksel;
@@ -90,6 +90,14 @@ static void __init imx6q_1588_init(void)
 		return;
 	}
 
+	/*
+	 * If enet_clk_ref configured, we assume DT did it properly and .
+	 * clk-imx6q.c will do needed configuration.
+	 */
+	fec_enet_ref = of_clk_get_by_name(np, "enet_clk_ref");
+	if (!IS_ERR(fec_enet_ref))
+		goto put_node;
+
 	ptp_clk = of_clk_get(np, 2);
 	if (IS_ERR(ptp_clk)) {
 		pr_warn("%s: failed to get ptp clock\n", __func__);
diff --git a/arch/arm/mach-imx/mach-imx6ul.c b/arch/arm/mach-imx/mach-imx6ul.c
index dbf8d19cef11..7a0299de1db6 100644
--- a/arch/arm/mach-imx/mach-imx6ul.c
+++ b/arch/arm/mach-imx/mach-imx6ul.c
@@ -4,8 +4,6 @@
  */
 #include <linux/irqchip.h>
 #include <linux/mfd/syscon.h>
-#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
-#include <linux/micrel_phy.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
 #include <linux/regmap.h>
@@ -16,30 +14,12 @@
 #include "cpuidle.h"
 #include "hardware.h"
 
-static void __init imx6ul_enet_clk_init(void)
-{
-	struct regmap *gpr;
-
-	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6ul-iomuxc-gpr");
-	if (!IS_ERR(gpr))
-		regmap_update_bits(gpr, IOMUXC_GPR1, IMX6UL_GPR1_ENET_CLK_DIR,
-				   IMX6UL_GPR1_ENET_CLK_OUTPUT);
-	else
-		pr_err("failed to find fsl,imx6ul-iomux-gpr regmap\n");
-}
-
-static inline void imx6ul_enet_init(void)
-{
-	imx6ul_enet_clk_init();
-}
-
 static void __init imx6ul_init_machine(void)
 {
 	imx_print_silicon_rev(cpu_is_imx6ull() ? "i.MX6ULL" : "i.MX6UL",
 		imx_get_soc_revision());
 
 	of_platform_default_populate(NULL, NULL, NULL);
-	imx6ul_enet_init();
 	imx_anatop_init();
 	imx6ul_pm_init();
 }
diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c
index b9efe9da06e0..2157493b78a9 100644
--- a/arch/arm/mach-imx/mmdc.c
+++ b/arch/arm/mach-imx/mmdc.c
@@ -456,7 +456,7 @@ static int mmdc_pmu_init(struct mmdc_pmu *pmu_mmdc,
 	return pmu_mmdc->id;
 }
 
-static int imx_mmdc_remove(struct platform_device *pdev)
+static void imx_mmdc_remove(struct platform_device *pdev)
 {
 	struct mmdc_pmu *pmu_mmdc = platform_get_drvdata(pdev);
 
@@ -466,7 +466,6 @@ static int imx_mmdc_remove(struct platform_device *pdev)
 	iounmap(pmu_mmdc->mmdc_base);
 	clk_disable_unprepare(pmu_mmdc->mmdc_ipg_clk);
 	kfree(pmu_mmdc);
-	return 0;
 }
 
 static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_base,
@@ -592,7 +591,7 @@ static struct platform_driver imx_mmdc_driver = {
 		.of_match_table = imx_mmdc_dt_ids,
 	},
 	.probe		= imx_mmdc_probe,
-	.remove		= imx_mmdc_remove,
+	.remove_new	= imx_mmdc_remove,
 };
 
 static int __init imx_mmdc_init(void)
diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig
index 85b0d9ddb7d8..8c1d4402fd69 100644
--- a/arch/arm/mach-mmp/Kconfig
+++ b/arch/arm/mach-mmp/Kconfig
@@ -76,10 +76,4 @@ config CPU_MMP2
 	help
 	  Select code specific to MMP2. MMP2 is ARMv7 compatible.
 
-config USB_EHCI_MV_U2O
-        bool "EHCI support for PXA USB OTG controller"
-	depends on USB_EHCI_MV
-	help
-	  Enables support for OTG controller which can be switched to host mode.
-
 endif
diff --git a/arch/arm/mach-mstar/Kconfig b/arch/arm/mach-mstar/Kconfig
index 5dbea7b485af..fa9709f30b46 100644
--- a/arch/arm/mach-mstar/Kconfig
+++ b/arch/arm/mach-mstar/Kconfig
@@ -20,11 +20,4 @@ config MACH_INFINITY
 	help
 	  Support for MStar/Sigmastar infinity IP camera SoCs.
 
-config MACH_MERCURY
-	bool "MStar/Sigmastar mercury SoC support"
-	default ARCH_MSTARV7
-	help
-	  Support for MStar/Sigmastar mercury dash camera SoCs.
-	  Note that older Mercury2 SoCs are ARM9 based and not supported.
-
 endif
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index 9aa765d4cdc8..62e982f74bc2 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -14,6 +14,9 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
 #include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include "mv78xx0.h"
@@ -21,6 +24,11 @@
 #include "mpp.h"
 
 
+#define TSWXL_AUTO_SWITCH	15
+#define TSWXL_USB_POWER1	30
+#define TSWXL_USB_POWER2	31
+
+
 /* This arch has 2 Giga Ethernet */
 
 static struct mv643xx_eth_platform_data db78x00_ge00_data = {
@@ -39,7 +47,7 @@ static struct mv_sata_platform_data db78x00_sata_data = {
 };
 
 static struct i2c_board_info __initdata db78x00_i2c_rtc = {
-	I2C_BOARD_INFO("ds1338", 0x68),
+	I2C_BOARD_INFO("rs5c372a", 0x32),
 };
 
 
@@ -57,9 +65,9 @@ static unsigned int wxl_mpp_config[] __initdata = {
 	MPP10_GE1_RXD2,
 	MPP11_GE1_RXD3,
 	MPP12_GPIO,
-	MPP13_SYSRST_OUTn,
-	MPP14_SATA1_ACTn,
-	MPP15_SATA0_ACTn,
+	MPP13_GPIO,
+	MPP14_GPIO,
+	MPP15_GPIO,
 	MPP16_GPIO,
 	MPP17_GPIO,
 	MPP18_GPIO,
@@ -73,7 +81,7 @@ static unsigned int wxl_mpp_config[] __initdata = {
 	MPP26_UA2_CTSn,
 	MPP27_UA2_RTSn,
 	MPP28_GPIO,
-	MPP29_SYSRST_OUTn,
+	MPP29_GPIO,
 	MPP30_GPIO,
 	MPP31_GPIO,
 	MPP32_GPIO,
@@ -84,19 +92,41 @@ static unsigned int wxl_mpp_config[] __initdata = {
 	MPP37_GPIO,
 	MPP38_GPIO,
 	MPP39_GPIO,
-	MPP40_UNUSED,
-	MPP41_UNUSED,
-	MPP42_UNUSED,
-	MPP43_UNUSED,
-	MPP44_UNUSED,
-	MPP45_UNUSED,
-	MPP46_UNUSED,
-	MPP47_UNUSED,
-	MPP48_SATA1_ACTn,
-	MPP49_SATA0_ACTn,
+	MPP40_GPIO,
+	MPP41_GPIO,
+	MPP42_GPIO,
+	MPP43_GPIO,
+	MPP44_GPIO,
+	MPP45_GPIO,
+	MPP46_GPIO,
+	MPP47_GPIO,
+	MPP48_GPIO,
+	MPP49_GPIO,
 	0
 };
 
+static struct gpio_keys_button tswxl_buttons[] = {
+	{
+		.code	   = KEY_OPTION,
+		.gpio	   = TSWXL_AUTO_SWITCH,
+		.desc	   = "Power-auto Switch",
+		.active_low     = 1,
+	}
+};
+
+static struct gpio_keys_platform_data tswxl_button_data = {
+	.buttons	= tswxl_buttons,
+	.nbuttons       = ARRAY_SIZE(tswxl_buttons),
+};
+
+static struct platform_device tswxl_button_device = {
+	.name	   = "gpio-keys",
+	.id	     = -1,
+	.num_resources  = 0,
+	.dev	    = {
+		.platform_data  = &tswxl_button_data,
+	},
+};
 
 static void __init wxl_init(void)
 {
@@ -111,7 +141,6 @@ static void __init wxl_init(void)
 	 */
 	mv78xx0_ehci0_init();
 	mv78xx0_ehci1_init();
-	mv78xx0_ehci2_init();
 	mv78xx0_ge00_init(&db78x00_ge00_data);
 	mv78xx0_ge01_init(&db78x00_ge01_data);
 	mv78xx0_sata_init(&db78x00_sata_data);
@@ -119,22 +148,23 @@ static void __init wxl_init(void)
 	mv78xx0_uart1_init();
 	mv78xx0_uart2_init();
 	mv78xx0_uart3_init();
+	mv78xx0_xor_init();
+	mv78xx0_crypto_init();
 	mv78xx0_i2c_init();
 	i2c_register_board_info(0, &db78x00_i2c_rtc, 1);
+
+	//enable both usb ports
+	gpio_direction_output(TSWXL_USB_POWER1, 1);
+	gpio_direction_output(TSWXL_USB_POWER2, 1);
+
+	//enable rear switch
+	platform_device_register(&tswxl_button_device);
 }
 
 static int __init wxl_pci_init(void)
 {
-	if (machine_is_terastation_wxl()) {
-		/*
-		 * Assign the x16 PCIe slot on the board to CPU core
-		 * #0, and let CPU core #1 have the four x1 slots.
-		 */
-		if (mv78xx0_core_index() == 0)
-			mv78xx0_pcie_init(0, 1);
-		else
-			mv78xx0_pcie_init(1, 0);
-	}
+	if (machine_is_terastation_wxl() && mv78xx0_core_index() == 0)
+                mv78xx0_pcie_init(1, 1);
 
 	return 0;
 }
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index 461a68945c26..679753fcc0ef 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -342,6 +342,29 @@ void __ref mv78xx0_timer_init(void)
 			IRQ_MV78XX0_TIMER_1, get_tclk());
 }
 
+/****************************************************************************
+* XOR engine
+****************************************************************************/
+void __init mv78xx0_xor_init(void)
+{
+	orion_xor0_init(XOR_PHYS_BASE,
+		XOR_PHYS_BASE + 0x200,
+		IRQ_MV78XX0_XOR_0, IRQ_MV78XX0_XOR_1);
+}
+
+/****************************************************************************
+ * Cryptographic Engines and Security Accelerator (CESA)
+****************************************************************************/
+void __init mv78xx0_crypto_init(void)
+{
+	mvebu_mbus_add_window_by_id(MV78XX0_MBUS_SRAM_TARGET,
+				MV78XX0_MBUS_SRAM_ATTR,
+				MV78XX0_SRAM_PHYS_BASE,
+			MV78XX0_SRAM_SIZE);
+	orion_crypto_init(CRYPTO_PHYS_BASE, MV78XX0_SRAM_PHYS_BASE,
+		SZ_8K, IRQ_MV78XX0_CRYPTO);
+}
+
 
 /*****************************************************************************
  * General
diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h
index d8c6c2400e27..9f1dfd595003 100644
--- a/arch/arm/mach-mv78xx0/common.h
+++ b/arch/arm/mach-mv78xx0/common.h
@@ -43,6 +43,8 @@ void mv78xx0_uart0_init(void);
 void mv78xx0_uart1_init(void);
 void mv78xx0_uart2_init(void);
 void mv78xx0_uart3_init(void);
+void mv78xx0_xor_init(void);
+void mv78xx0_crypto_init(void);
 void mv78xx0_i2c_init(void);
 void mv78xx0_restart(enum reboot_mode, const char *);
 
diff --git a/arch/arm/mach-mv78xx0/mv78xx0.h b/arch/arm/mach-mv78xx0/mv78xx0.h
index 3f19bef7d7ac..88efb1e44142 100644
--- a/arch/arm/mach-mv78xx0/mv78xx0.h
+++ b/arch/arm/mach-mv78xx0/mv78xx0.h
@@ -49,9 +49,15 @@
 #define MV78XX0_REGS_VIRT_BASE		IOMEM(0xfec00000)
 #define MV78XX0_REGS_SIZE		SZ_1M
 
+#define MV78XX0_SRAM_PHYS_BASE          (0xf2200000)
+#define MV78XX0_SRAM_SIZE               SZ_8K
+
 #define MV78XX0_PCIE_MEM_PHYS_BASE	0xc0000000
 #define MV78XX0_PCIE_MEM_SIZE		0x30000000
 
+#define MV78XX0_MBUS_SRAM_TARGET       0x09
+#define MV78XX0_MBUS_SRAM_ATTR         0x00
+
 /*
  * Core-specific peripheral registers.
  */
@@ -98,6 +104,8 @@
 #define USB1_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x51000)
 #define USB2_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x52000)
 
+#define XOR_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x60900)
+
 #define GE00_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x70000)
 #define GE01_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0x74000)
 
@@ -106,6 +114,8 @@
 #define PCIE12_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x88000)
 #define PCIE13_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE + 0x8c000)
 
+#define CRYPTO_PHYS_BASE	(MV78XX0_REGS_PHYS_BASE + 0x90000)
+
 #define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE + 0xa0000)
 
 /*
diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c
index 6190f538a124..fa68b63941b1 100644
--- a/arch/arm/mach-mv78xx0/pcie.c
+++ b/arch/arm/mach-mv78xx0/pcie.c
@@ -42,7 +42,7 @@ void __init mv78xx0_pcie_id(u32 *dev, u32 *rev)
 
 u32 pcie_port_size[8] = {
 	0,
-	0x30000000,
+	0x20000000,
 	0x10000000,
 	0x10000000,
 	0x08000000,
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 0129b7c514d7..51e47053c816 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -174,7 +174,7 @@ static void __init update_fec_mac_prop(enum mac_oui oui)
 
 		from = np;
 
-		if (of_get_property(np, "local-mac-address", NULL))
+		if (of_property_present(np, "local-mac-address"))
 			continue;
 
 		newmac = kzalloc(sizeof(*newmac) + 6, GFP_KERNEL);
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 8df9a4de0e79..cbf703f0d850 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -118,7 +118,7 @@ config MACH_OMAP_OSK
 	depends on ARCH_OMAP16XX
 	help
 	  TI OMAP 5912 OSK (OMAP Starter Kit) board support. Say Y here
-          if you have such a board.
+	  if you have such a board.
 
 config MACH_OMAP_PALMTE
 	bool "Palm Tungsten E"
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 0f67ac4c6fd2..9108c871d129 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -822,8 +822,6 @@ static int __init modem_nreset_init(void)
  */
 static int __init ams_delta_modem_init(void)
 {
-	int err;
-
 	if (!machine_is_ams_delta())
 		return -ENODEV;
 
@@ -832,9 +830,7 @@ static int __init ams_delta_modem_init(void)
 	/* Initialize the modem_nreset regulator consumer before use */
 	modem_priv.regulator = ERR_PTR(-ENODEV);
 
-	err = platform_device_register(&ams_delta_modem_device);
-
-	return err;
+	return platform_device_register(&ams_delta_modem_device);
 }
 arch_initcall_sync(ams_delta_modem_init);
 
diff --git a/arch/arm/mach-omap1/omap-dma.c b/arch/arm/mach-omap1/omap-dma.c
index f7e62de427f3..9ee472f8ead1 100644
--- a/arch/arm/mach-omap1/omap-dma.c
+++ b/arch/arm/mach-omap1/omap-dma.c
@@ -833,7 +833,7 @@ exit_dma_irq_fail:
 	return ret;
 }
 
-static int omap_system_dma_remove(struct platform_device *pdev)
+static void omap_system_dma_remove(struct platform_device *pdev)
 {
 	int dma_irq, irq_rel = 0;
 
@@ -841,13 +841,11 @@ static int omap_system_dma_remove(struct platform_device *pdev)
 		dma_irq = platform_get_irq(pdev, irq_rel);
 		free_irq(dma_irq, (void *)(irq_rel + 1));
 	}
-
-	return 0;
 }
 
 static struct platform_driver omap_system_dma_driver = {
 	.probe		= omap_system_dma_probe,
-	.remove		= omap_system_dma_remove,
+	.remove_new	= omap_system_dma_remove,
 	.driver		= {
 		.name	= "omap_dma_system"
 	},
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 3b53dda9ec79..821727eefd5a 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -255,17 +255,6 @@ config MACH_NOKIA_N8X0
 	select MACH_NOKIA_N810
 	select MACH_NOKIA_N810_WIMAX
 
-config OMAP3_SDRC_AC_TIMING
-	bool "Enable SDRC AC timing register changes"
-	depends on ARCH_OMAP3
-	help
-	  If you know that none of your system initiators will attempt to
-	  access SDRAM during CORE DVFS, select Y here.  This should boost
-	  SDRAM performance at lower CORE OPPs.  There are relatively few
-	  users who will wish to say yes at this point - almost everyone will
-	  wish to say no.  Selecting yes without understanding what is
-	  going on could result in system crashes;
-
 endmenu
 
 endif
diff --git a/arch/arm/mach-omap2/cm33xx.c b/arch/arm/mach-omap2/cm33xx.c
index d61fa06117b4..c824d4e3db63 100644
--- a/arch/arm/mach-omap2/cm33xx.c
+++ b/arch/arm/mach-omap2/cm33xx.c
@@ -5,7 +5,7 @@
  * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
  * Vaibhav Hiremath <hvaibhav@ti.com>
  *
- * Reference taken from from OMAP4 cminst44xx.c
+ * Reference taken from OMAP4 cminst44xx.c
  */
 
 #include <linux/kernel.h>
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 5a2a9b8e61ed..aac4c4ee2528 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -706,9 +706,7 @@ static const struct of_device_id ti_clkctrl_match_table[] __initconst = {
 
 static int __init _setup_clkctrl_provider(struct device_node *np)
 {
-	const __be32 *addrp;
 	struct clkctrl_provider *provider;
-	u64 size;
 	int i;
 
 	provider = memblock_alloc(sizeof(*provider), SMP_CACHE_BYTES);
@@ -717,8 +715,7 @@ static int __init _setup_clkctrl_provider(struct device_node *np)
 
 	provider->node = np;
 
-	provider->num_addrs =
-		of_property_count_elems_of_size(np, "reg", sizeof(u32)) / 2;
+	provider->num_addrs = of_address_count(np);
 
 	provider->addr =
 		memblock_alloc(sizeof(void *) * provider->num_addrs,
@@ -733,11 +730,11 @@ static int __init _setup_clkctrl_provider(struct device_node *np)
 		return -ENOMEM;
 
 	for (i = 0; i < provider->num_addrs; i++) {
-		addrp = of_get_address(np, i, &size, NULL);
-		provider->addr[i] = (u32)of_translate_address(np, addrp);
-		provider->size[i] = size;
-		pr_debug("%s: %pOF: %x...%x\n", __func__, np, provider->addr[i],
-			 provider->addr[i] + provider->size[i]);
+		struct resource res;
+		of_address_to_resource(np, i, &res);
+		provider->addr[i] = res.start;
+		provider->size[i] = resource_size(&res);
+		pr_debug("%s: %pOF: %pR\n", __func__, np, &res);
 	}
 
 	list_add(&provider->link, &clkctrl_providers);
@@ -2322,11 +2319,11 @@ static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
 static void __init parse_module_flags(struct omap_hwmod *oh,
 				      struct device_node *np)
 {
-	if (of_find_property(np, "ti,no-reset-on-init", NULL))
+	if (of_property_read_bool(np, "ti,no-reset-on-init"))
 		oh->flags |= HWMOD_INIT_NO_RESET;
-	if (of_find_property(np, "ti,no-idle-on-init", NULL))
+	if (of_property_read_bool(np, "ti,no-idle-on-init"))
 		oh->flags |= HWMOD_INIT_NO_IDLE;
-	if (of_find_property(np, "ti,no-idle", NULL))
+	if (of_property_read_bool(np, "ti,no-idle"))
 		oh->flags |= HWMOD_NO_IDLE;
 }
 
@@ -3457,7 +3454,7 @@ static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh,
 	}
 
 	if (list_empty(&oh->slave_ports)) {
-		oi = kcalloc(1, sizeof(*oi), GFP_KERNEL);
+		oi = kzalloc(sizeof(*oi), GFP_KERNEL);
 		if (!oi)
 			goto out_free_class;
 
diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c
index 711bcc6c8ddd..c907478be196 100644
--- a/arch/arm/mach-omap2/pm33xx-core.c
+++ b/arch/arm/mach-omap2/pm33xx-core.c
@@ -104,8 +104,6 @@ static int amx3_common_init(int (*idle)(u32 wfi_flags))
 
 static int am33xx_suspend_init(int (*idle)(u32 wfi_flags))
 {
-	int ret;
-
 	gfx_l4ls_clkdm = clkdm_lookup("gfx_l4ls_gfx_clkdm");
 
 	if (!gfx_l4ls_clkdm) {
@@ -113,9 +111,7 @@ static int am33xx_suspend_init(int (*idle)(u32 wfi_flags))
 		return -ENODEV;
 	}
 
-	ret = amx3_common_init(idle);
-
-	return ret;
+	return amx3_common_init(idle);
 }
 
 static int am43xx_suspend_init(int (*idle)(u32 wfi_flags))
diff --git a/arch/arm/mach-oxnas/Kconfig b/arch/arm/mach-oxnas/Kconfig
deleted file mode 100644
index a9ded7079268..000000000000
--- a/arch/arm/mach-oxnas/Kconfig
+++ /dev/null
@@ -1,38 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-menuconfig ARCH_OXNAS
-	bool "Oxford Semiconductor OXNAS Family SoCs"
-	depends on (ARCH_MULTI_V5 && CPU_LITTLE_ENDIAN) || ARCH_MULTI_V6
-	select ARCH_HAS_RESET_CONTROLLER
-	select COMMON_CLK_OXNAS
-	select GPIOLIB
-	select MFD_SYSCON
-	select OXNAS_RPS_TIMER
-	select PINCTRL_OXNAS
-	select RESET_CONTROLLER
-	select RESET_OXNAS
-	select VERSATILE_FPGA_IRQ
-	select PINCTRL
-	help
-	  Support for OxNas SoC family developed by Oxford Semiconductor.
-
-if ARCH_OXNAS
-
-config MACH_OX810SE
-	bool "Support OX810SE Based Products"
-	depends on ARCH_MULTI_V5
-	select CPU_ARM926T
-	help
-	  Include Support for the Oxford Semiconductor OX810SE SoC Based Products.
-
-config MACH_OX820
-	bool "Support OX820 Based Products"
-	depends on ARCH_MULTI_V6
-	select ARM_GIC
-	select DMA_CACHE_RWFO if SMP
-	select HAVE_SMP
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	help
-	  Include Support for the Oxford Semiconductor OX820 SoC Based Products.
-
-endif
diff --git a/arch/arm/mach-oxnas/Makefile b/arch/arm/mach-oxnas/Makefile
deleted file mode 100644
index 0e78ecfe6c49..000000000000
--- a/arch/arm/mach-oxnas/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
diff --git a/arch/arm/mach-oxnas/headsmp.S b/arch/arm/mach-oxnas/headsmp.S
deleted file mode 100644
index 9c0f1479f33a..000000000000
--- a/arch/arm/mach-oxnas/headsmp.S
+++ /dev/null
@@ -1,23 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
- * Copyright (c) 2003 ARM Limited
- * All Rights Reserved
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-	__INIT
-
-/*
- * OX820 specific entry point for secondary CPUs.
- */
-ENTRY(ox820_secondary_startup)
-	mov r4, #0
-	/* invalidate both caches and branch target cache */
-	mcr p15, 0, r4, c7, c7, 0
-	/*
-	 * we've been released from the holding pen: secondary_stack
-	 * should now contain the SVC stack for this core
-	 */
-	b	secondary_startup
diff --git a/arch/arm/mach-oxnas/platsmp.c b/arch/arm/mach-oxnas/platsmp.c
deleted file mode 100644
index f0a50b9e61df..000000000000
--- a/arch/arm/mach-oxnas/platsmp.c
+++ /dev/null
@@ -1,96 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
- * Copyright (C) 2002 ARM Ltd.
- * All Rights Reserved
- */
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-
-#include <asm/cacheflush.h>
-#include <asm/cp15.h>
-#include <asm/smp_plat.h>
-#include <asm/smp_scu.h>
-
-extern void ox820_secondary_startup(void);
-
-static void __iomem *cpu_ctrl;
-static void __iomem *gic_cpu_ctrl;
-
-#define HOLDINGPEN_CPU_OFFSET		0xc8
-#define HOLDINGPEN_LOCATION_OFFSET	0xc4
-
-#define GIC_NCPU_OFFSET(cpu)		(0x100 + (cpu)*0x100)
-#define GIC_CPU_CTRL			0x00
-#define GIC_CPU_CTRL_ENABLE		1
-
-static int __init ox820_boot_secondary(unsigned int cpu,
-		struct task_struct *idle)
-{
-	/*
-	 * Write the address of secondary startup into the
-	 * system-wide flags register. The BootMonitor waits
-	 * until it receives a soft interrupt, and then the
-	 * secondary CPU branches to this address.
-	 */
-	writel(virt_to_phys(ox820_secondary_startup),
-			cpu_ctrl + HOLDINGPEN_LOCATION_OFFSET);
-
-	writel(cpu, cpu_ctrl + HOLDINGPEN_CPU_OFFSET);
-
-	/*
-	 * Enable GIC cpu interface in CPU Interface Control Register
-	 */
-	writel(GIC_CPU_CTRL_ENABLE,
-		gic_cpu_ctrl + GIC_NCPU_OFFSET(cpu) + GIC_CPU_CTRL);
-
-	/*
-	 * Send the secondary CPU a soft interrupt, thereby causing
-	 * the boot monitor to read the system wide flags register,
-	 * and branch to the address found there.
-	 */
-	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
-
-	return 0;
-}
-
-static void __init ox820_smp_prepare_cpus(unsigned int max_cpus)
-{
-	struct device_node *np;
-	void __iomem *scu_base;
-
-	np = of_find_compatible_node(NULL, NULL, "arm,arm11mp-scu");
-	scu_base = of_iomap(np, 0);
-	of_node_put(np);
-	if (!scu_base)
-		return;
-
-	/* Remap CPU Interrupt Interface Registers */
-	np = of_find_compatible_node(NULL, NULL, "arm,arm11mp-gic");
-	gic_cpu_ctrl = of_iomap(np, 1);
-	of_node_put(np);
-	if (!gic_cpu_ctrl)
-		goto unmap_scu;
-
-	np = of_find_compatible_node(NULL, NULL, "oxsemi,ox820-sys-ctrl");
-	cpu_ctrl = of_iomap(np, 0);
-	of_node_put(np);
-	if (!cpu_ctrl)
-		goto unmap_scu;
-
-	scu_enable(scu_base);
-	flush_cache_all();
-
-unmap_scu:
-	iounmap(scu_base);
-}
-
-static const struct smp_operations ox820_smp_ops __initconst = {
-	.smp_prepare_cpus	= ox820_smp_prepare_cpus,
-	.smp_boot_secondary	= ox820_boot_secondary,
-};
-
-CPU_METHOD_OF_DECLARE(ox820_smp, "oxsemi,ox820-smp", &ox820_smp_ops);
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 96f33ef1d9ea..a9ef71008147 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -257,8 +257,7 @@ void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int))
 	}
 	pxa_irq_base = io_p2v(res.start);
 
-	if (of_find_property(node, "marvell,intc-priority", NULL))
-		cpu_has_ipr = 1;
+	cpu_has_ipr = of_property_read_bool(node, "marvell,intc-priority");
 
 	ret = irq_alloc_descs(-1, 0, pxa_internal_irq_nr, 0);
 	if (ret < 0) {
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 929cc51ed7c2..d29bdcd5270e 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -890,7 +890,7 @@ static int sharpsl_pm_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int sharpsl_pm_remove(struct platform_device *pdev)
+static void sharpsl_pm_remove(struct platform_device *pdev)
 {
 	suspend_set_ops(NULL);
 
@@ -917,13 +917,11 @@ static int sharpsl_pm_remove(struct platform_device *pdev)
 
 	del_timer_sync(&sharpsl_pm.chrg_full_timer);
 	del_timer_sync(&sharpsl_pm.ac_timer);
-
-	return 0;
 }
 
 static struct platform_driver sharpsl_pm_driver = {
 	.probe		= sharpsl_pm_probe,
-	.remove		= sharpsl_pm_remove,
+	.remove_new	= sharpsl_pm_remove,
 	.suspend	= sharpsl_pm_suspend,
 	.resume		= sharpsl_pm_resume,
 	.driver		= {
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index 1dbe98948ce3..67f72ca984b2 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -175,18 +175,17 @@ static int jornada_ssp_probe(struct platform_device *dev)
 	return 0;
 };
 
-static int jornada_ssp_remove(struct platform_device *dev)
+static void jornada_ssp_remove(struct platform_device *dev)
 {
 	/* Note that this doesn't actually remove the driver, since theres nothing to remove
 	 * It just makes sure everything is turned off */
 	GPSR = GPIO_GPIO25;
 	ssp_exit();
-	return 0;
 };
 
 struct platform_driver jornadassp_driver = {
 	.probe	= jornada_ssp_probe,
-	.remove	= jornada_ssp_remove,
+	.remove_new = jornada_ssp_remove,
 	.driver	= {
 		.name	= "jornada_ssp",
 	},
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 6876bc1e33b4..0ef0ebbf31ac 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -376,7 +376,7 @@ static int neponset_probe(struct platform_device *dev)
 	return ret;
 }
 
-static int neponset_remove(struct platform_device *dev)
+static void neponset_remove(struct platform_device *dev)
 {
 	struct neponset_drvdata *d = platform_get_drvdata(dev);
 	int irq = platform_get_irq(dev, 0);
@@ -395,8 +395,6 @@ static int neponset_remove(struct platform_device *dev)
 	nep = NULL;
 	iounmap(d->base);
 	kfree(d);
-
-	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -425,7 +423,7 @@ static const struct dev_pm_ops neponset_pm_ops = {
 
 static struct platform_driver neponset_device_driver = {
 	.probe		= neponset_probe,
-	.remove		= neponset_remove,
+	.remove_new	= neponset_remove,
 	.driver		= {
 		.name	= "neponset",
 		.pm	= PM_OPS,
diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c
index e771ce70e132..ec6f421c0f4d 100644
--- a/arch/arm/mach-shmobile/platsmp-apmu.c
+++ b/arch/arm/mach-shmobile/platsmp-apmu.c
@@ -10,6 +10,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/ioport.h>
+#include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/smp.h>
 #include <linux/suspend.h>
@@ -210,7 +211,6 @@ static void apmu_parse_dt(void (*fn)(struct resource *res, int cpu, int bit))
 	struct device_node *np_apmu, *np_cpu;
 	struct resource res;
 	int bit, index;
-	u32 id;
 
 	for_each_matching_node(np_apmu, apmu_ids) {
 		/* only enable the cluster that includes the boot CPU */
@@ -218,33 +218,29 @@ static void apmu_parse_dt(void (*fn)(struct resource *res, int cpu, int bit))
 
 		for (bit = 0; bit < CONFIG_NR_CPUS; bit++) {
 			np_cpu = of_parse_phandle(np_apmu, "cpus", bit);
-			if (np_cpu) {
-				if (!of_property_read_u32(np_cpu, "reg", &id)) {
-					if (id == cpu_logical_map(0)) {
-						is_allowed = true;
-						of_node_put(np_cpu);
-						break;
-					}
-
-				}
+			if (!np_cpu)
+				break;
+			if (of_cpu_node_to_id(np_cpu) == 0) {
+				is_allowed = true;
 				of_node_put(np_cpu);
+				break;
 			}
+			of_node_put(np_cpu);
 		}
 		if (!is_allowed)
 			continue;
 
 		for (bit = 0; bit < CONFIG_NR_CPUS; bit++) {
 			np_cpu = of_parse_phandle(np_apmu, "cpus", bit);
-			if (np_cpu) {
-				if (!of_property_read_u32(np_cpu, "reg", &id)) {
-					index = get_logical_index(id);
-					if ((index >= 0) &&
-					    !of_address_to_resource(np_apmu,
-								    0, &res))
-						fn(&res, index, bit);
-				}
-				of_node_put(np_cpu);
-			}
+			if (!np_cpu)
+				break;
+
+			index = of_cpu_node_to_id(np_cpu);
+			if ((index >= 0) &&
+			    !of_address_to_resource(np_apmu, 0, &res))
+				fn(&res, index, bit);
+
+			of_node_put(np_cpu);
 		}
 	}
 }
diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
index 1add7ee49b63..7108ad628f8d 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -81,12 +81,6 @@ config ARCH_SPEAR6XX
 	help
 	  Supports for ARM's SPEAR6XX family
 
-config MACH_SPEAR600
-	def_bool y
-	depends on ARCH_SPEAR6XX
-	help
-	  Supports ST SPEAr600 boards configured via the device-tree
-
 config ARCH_SPEAR_AUTO
 	bool
 	depends on !ARCH_SPEAR13XX && !ARCH_SPEAR6XX
diff --git a/drivers/firmware/turris-mox-rwtm.c b/drivers/firmware/turris-mox-rwtm.c
index 6ea5789a89e2..2de0fb139ce1 100644
--- a/drivers/firmware/turris-mox-rwtm.c
+++ b/drivers/firmware/turris-mox-rwtm.c
@@ -104,7 +104,7 @@ static void mox_kobj_release(struct kobject *kobj)
 	kfree(to_rwtm(kobj)->kobj);
 }
 
-static struct kobj_type mox_kobj_ktype = {
+static const struct kobj_type mox_kobj_ktype = {
 	.release	= mox_kobj_release,
 	.sysfs_ops	= &kobj_sysfs_ops,
 };
diff --git a/drivers/soc/fsl/qbman/dpaa_sys.c b/drivers/soc/fsl/qbman/dpaa_sys.c
index 9dd8bb571dbc..33751450047e 100644
--- a/drivers/soc/fsl/qbman/dpaa_sys.c
+++ b/drivers/soc/fsl/qbman/dpaa_sys.c
@@ -39,8 +39,7 @@ int qbman_init_private_mem(struct device *dev, int idx, dma_addr_t *addr,
 {
 	struct device_node *mem_node;
 	struct reserved_mem *rmem;
-	struct property *prop;
-	int len, err;
+	int err;
 	__be32 *res_array;
 
 	mem_node = of_parse_phandle(dev->of_node, "memory-region", idx);
@@ -63,8 +62,9 @@ int qbman_init_private_mem(struct device *dev, int idx, dma_addr_t *addr,
 	 * This is needed because QBMan HW does not allow the base address/
 	 * size to be modified once set.
 	 */
-	prop = of_find_property(mem_node, "reg", &len);
-	if (!prop) {
+	if (!of_property_present(mem_node, "reg")) {
+		struct property *prop;
+
 		prop = devm_kzalloc(dev, sizeof(*prop), GFP_KERNEL);
 		if (!prop)
 			return -ENOMEM;