net: dsa: sja1105: convert to phylink_generic_validate()

Populate the supported interfaces and MAC capabilities for the SJA1105
DSA switch and remove the old validate implementation to allow DSA to
use phylink_generic_validate() for this switch driver.

This switch only supports a static model of configuration, so we
restrict the interface modes to the configured setting, and pass the
MAC capabilities. As it is unclear which interface modes support 1G
speeds, we keep the setting of MAC_1000FD conditional on the configured
interface mode.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

1 files changed, 13 insertions, 32 deletions

diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index c343effe2e96..6d763f2f63b7 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -1411,48 +1411,29 @@ static void sja1105_mac_link_up(struct dsa_switch *ds, int port,
 	sja1105_inhibit_tx(priv, BIT(port), false);
 }
 
-static void sja1105_phylink_validate(struct dsa_switch *ds, int port,
-				     unsigned long *supported,
-				     struct phylink_link_state *state)
+static void sja1105_phylink_get_caps(struct dsa_switch *ds, int port,
+				     struct phylink_config *config)
 {
-	/* Construct a new mask which exhaustively contains all link features
-	 * supported by the MAC, and then apply that (logical AND) to what will
-	 * be sent to the PHY for "marketing".
-	 */
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
 	struct sja1105_private *priv = ds->priv;
 	struct sja1105_xmii_params_entry *mii;
 
 	mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries;
 
-	/* include/linux/phylink.h says:
-	 *     When @state->interface is %PHY_INTERFACE_MODE_NA, phylink
-	 *     expects the MAC driver to return all supported link modes.
+	/* The SJA1105 MAC programming model is through the static config
+	 * (the xMII Mode table cannot be dynamically reconfigured), and
+	 * we have to program that early.
 	 */
-	if (state->interface != PHY_INTERFACE_MODE_NA &&
-	    sja1105_phy_mode_mismatch(priv, port, state->interface)) {
-		linkmode_zero(supported);
-		return;
-	}
+	__set_bit(priv->phy_mode[port], config->supported_interfaces);
+
+	config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+		MAC_10FD | MAC_100FD;
 
-	/* The MAC does not support pause frames, and also doesn't
-	 * support half-duplex traffic modes.
-	 */
-	phylink_set(mask, Autoneg);
-	phylink_set(mask, MII);
-	phylink_set(mask, 10baseT_Full);
-	phylink_set(mask, 100baseT_Full);
-	phylink_set(mask, 100baseT1_Full);
 	if (mii->xmii_mode[port] == XMII_MODE_RGMII ||
 	    mii->xmii_mode[port] == XMII_MODE_SGMII)
-		phylink_set(mask, 1000baseT_Full);
-	if (priv->info->supports_2500basex[port]) {
-		phylink_set(mask, 2500baseT_Full);
-		phylink_set(mask, 2500baseX_Full);
-	}
+		config->mac_capabilities |= MAC_1000FD;
 
-	linkmode_and(supported, supported, mask);
-	linkmode_and(state->advertising, state->advertising, mask);
+	if (priv->info->supports_2500basex[port])
+		config->mac_capabilities |= MAC_2500FD;
 }
 
 static int
@@ -3189,7 +3170,7 @@ static const struct dsa_switch_ops sja1105_switch_ops = {
 	.set_ageing_time	= sja1105_set_ageing_time,
 	.port_change_mtu	= sja1105_change_mtu,
 	.port_max_mtu		= sja1105_get_max_mtu,
-	.phylink_validate	= sja1105_phylink_validate,
+	.phylink_get_caps	= sja1105_phylink_get_caps,
 	.phylink_mac_config	= sja1105_mac_config,
 	.phylink_mac_link_up	= sja1105_mac_link_up,
 	.phylink_mac_link_down	= sja1105_mac_link_down,