diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-01-27 10:30:42 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-01-27 10:30:42 -0800 |
| commit | 9e1af7567b266dc6c3c8fd434ea807b3206bfdc1 (patch) | |
| tree | e974d528b749466203dfdd4915826300ffb88954 | |
| parent | b9b627a449889e9dacfe9e7ac3cdf829a0004845 (diff) | |
| parent | 533a6cfe08f96a7b5c65e06d20916d552c11b256 (diff) | |
Merge tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"There are no updates for the MEMSTICK subsystem this time. But note
that I am also carrying a patch from the pinctrl tree, which has been
shared through an immutable branch.
Summary:
MMC core:
- Convert to reasonable timeouts for all CMD6 commands (updates for
BKOPS, CACHE_FLUSH and INAND_CMD38_ARG_EXT_CSD) for eMMC
- Respect f_max clock rate at card initialization
- Add gpiod_toggle_active_low() API
- Consolidate slot-gpio code by using gpiod_toggle_active_low()
MMC host:
- Add pinctrl_select_default_state() API
- Consolidate pintctrl code by using pinctrl_select_default_state()
- mmci: Support any block sizes for SDIO for some variants
- mmci: Enable reset control for stm32_sdmmc
- mmc_spi: Toggle SPI_CS_HIGH polarity rather than hard-coding it
- renesas_sdhi: Add support for the r8a77961 variant
- renesas_sdhi: A few minor improvements
- rockchip-dw-mshc: Add support for the rk3308 variant
- sdhci: Enable support for external DMA controllers
- sdhci: Fixup error path when sending CMD12
- sdhci-brcmstb: Add support for 7216b0 variant
- sdhci-brcmstb: Add support for command queuing (CQHCI)
- sdhci-brcmstb: Add support for eMMC HS400ES mode
- sdhci-msm: Add support for the sc7180 variant
- sdhci-msm: Add support for command queuing (CQHCI)
- sdhci-of-at91: Add support for the SAM9x60 variant
- sdhci-of-at91: Improve support for tunings
- sdhci-of-esdhc: A few fixups for some clock related issues
- sdhci-omap: Add support for the am335x and the am437x variants
- sdhci-omap: Improve support for erase operations
- sdhci-omap: Add support for external DMA"
* tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (89 commits)
mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch()
mmc: block: Use generic_cmd6_time when modifying INAND_CMD38_ARG_EXT_CSD
mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC
mmc: sdhci-cadence: remove unneeded 'inline' marker
dt-bindings: mmc: rockchip-dw-mshc: add description for rk3308
dt-bindings: mmc: convert rockchip dw-mshc bindings to yaml
dt-bindings: mmc: convert synopsys dw-mshc bindings to yaml
mmc: sdhci-msm: Add CQHCI support for sdhci-msm
mmc: sdhci: Let a vendor driver supply and update ADMA descriptor size
mmc: sdhci-of-esdhc: fix serious issue clock is always disabled
mmc: sdhci-of-esdhc: fix transfer mode register reading
mmc: sdhci-brcmstb: Fix incorrect switch to HS mode
mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)
mmc: sdhci-brcmstb: Add shutdown callback
mmc: sdhci-brcmstb: Fix driver to defer on clk_get defer
mmc: sdhci-brcmstb: Add ability to use HS400ES transfer mode
dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 7216b0
mmc: core: limit probe clock frequency to configured f_max
mmc: sdhci-milbeaut: Remove redundant platform_get_irq error message
mmc: sdhci: fix an issue of mixing different types
...
70 files changed, 1648 insertions, 762 deletions
diff --git a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt index 733b64a4d8eb..ae2074184528 100644 --- a/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt +++ b/Documentation/devicetree/bindings/mmc/brcm,sdhci-brcmstb.txt @@ -11,28 +11,43 @@ Required properties: - compatible: should be one of the following - "brcm,bcm7425-sdhci" - "brcm,bcm7445-sdhci" + - "brcm,bcm7216-sdhci" Refer to clocks/clock-bindings.txt for generic clock consumer properties. Example: - sdhci@f03e0100 { - compatible = "brcm,bcm7425-sdhci"; - reg = <0xf03e0000 0x100>; - interrupts = <0x0 0x26 0x0>; - sdhci,auto-cmd12; - clocks = <&sw_sdio>; + sdhci@84b0000 { sd-uhs-sdr50; sd-uhs-ddr50; + sd-uhs-sdr104; + sdhci,auto-cmd12; + compatible = "brcm,bcm7216-sdhci", + "brcm,bcm7445-sdhci", + "brcm,sdhci-brcmstb"; + reg = <0x84b0000 0x260 0x84b0300 0x200>; + reg-names = "host", "cfg"; + interrupts = <0x0 0x26 0x4>; + interrupt-names = "sdio0_0"; + clocks = <&scmi_clk 245>; + clock-names = "sw_sdio"; }; - sdhci@f03e0300 { + sdhci@84b1000 { + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + supports-cqe; non-removable; bus-width = <0x8>; - compatible = "brcm,bcm7425-sdhci"; - reg = <0xf03e0200 0x100>; - interrupts = <0x0 0x27 0x0>; - sdhci,auto-cmd12; - clocks = <sw_sdio>; - mmc-hs200-1_8v; + compatible = "brcm,bcm7216-sdhci", + "brcm,bcm7445-sdhci", + "brcm,sdhci-brcmstb"; + reg = <0x84b1000 0x260 0x84b1300 0x200>; + reg-names = "host", "cfg"; + interrupts = <0x0 0x27 0x4>; + interrupt-names = "sdio1_0"; + clocks = <&scmi_clk 245>; + clock-names = "sw_sdio"; }; diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index 2fb466ca2a9d..c93643fceabb 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -21,6 +21,7 @@ Required properties: "fsl,imx8mq-usdhc" "fsl,imx8mm-usdhc" "fsl,imx8mn-usdhc" + "fsl,imx8mp-usdhc" "fsl,imx8qxp-usdhc" Optional properties: diff --git a/Documentation/devicetree/bindings/mmc/renesas,sdhi.txt b/Documentation/devicetree/bindings/mmc/renesas,sdhi.txt index bc08fc43a9be..e6cc47844207 100644 --- a/Documentation/devicetree/bindings/mmc/renesas,sdhi.txt +++ b/Documentation/devicetree/bindings/mmc/renesas,sdhi.txt @@ -23,7 +23,8 @@ Required properties: "renesas,sdhi-r8a7793" - SDHI IP on R8A7793 SoC "renesas,sdhi-r8a7794" - SDHI IP on R8A7794 SoC "renesas,sdhi-r8a7795" - SDHI IP on R8A7795 SoC - "renesas,sdhi-r8a7796" - SDHI IP on R8A7796 SoC + "renesas,sdhi-r8a7796" - SDHI IP on R8A77960 SoC + "renesas,sdhi-r8a77961" - SDHI IP on R8A77961 SoC "renesas,sdhi-r8a77965" - SDHI IP on R8A77965 SoC "renesas,sdhi-r8a77970" - SDHI IP on R8A77970 SoC "renesas,sdhi-r8a77980" - SDHI IP on R8A77980 SoC diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt deleted file mode 100644 index 6f629b12bd69..000000000000 --- a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.txt +++ /dev/null @@ -1,49 +0,0 @@ -* Rockchip specific extensions to the Synopsys Designware Mobile - Storage Host Controller - -The Synopsys designware mobile storage host controller is used to interface -a SoC with storage medium such as eMMC or SD/MMC cards. This file documents -differences between the core Synopsys dw mshc controller properties described -by synopsys-dw-mshc.txt and the properties used by the Rockchip specific -extensions to the Synopsys Designware Mobile Storage Host Controller. - -Required Properties: - -* compatible: should be - - "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following, - before RK3288 - - "rockchip,rk3288-dw-mshc": for Rockchip RK3288 - - "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RV1108 - - "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip PX30 - - "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036 - - "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK322x - - "rockchip,rk3328-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3328 - - "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368 - - "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399 - -Optional Properties: -* clocks: from common clock binding: if ciu-drive and ciu-sample are - specified in clock-names, should contain handles to these clocks. - -* clock-names: Apart from the clock-names described in synopsys-dw-mshc.txt - two more clocks "ciu-drive" and "ciu-sample" are supported. They are used - to control the clock phases, "ciu-sample" is required for tuning high- - speed modes. - -* rockchip,default-sample-phase: The default phase to set ciu-sample at - probing, low speeds or in case where all phases work at tuning time. - If not specified 0 deg will be used. - -* rockchip,desired-num-phases: The desired number of times that the host - execute tuning when needed. If not specified, the host will do tuning - for 360 times, namely tuning for each degree. - -Example: - - rkdwmmc0@12200000 { - compatible = "rockchip,rk3288-dw-mshc"; - reg = <0x12200000 0x1000>; - interrupts = <0 75 0>; - #address-cells = <1>; - #size-cells = <0>; - }; diff --git a/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml new file mode 100644 index 000000000000..89c3edd6a728 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/rockchip-dw-mshc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip designware mobile storage host controller device tree bindings + +description: + Rockchip uses the Synopsys designware mobile storage host controller + to interface a SoC with storage medium such as eMMC or SD/MMC cards. + This file documents the combined properties for the core Synopsys dw mshc + controller that are not already included in the synopsys-dw-mshc-common.yaml + file and the Rockchip specific extensions. + +allOf: + - $ref: "synopsys-dw-mshc-common.yaml#" + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +# Everything else is described in the common file +properties: + compatible: + oneOf: + # for Rockchip RK2928 and before RK3288 + - const: rockchip,rk2928-dw-mshc + # for Rockchip RK3288 + - const: rockchip,rk3288-dw-mshc + - items: + - enum: + # for Rockchip PX30 + - rockchip,px30-dw-mshc + # for Rockchip RK3036 + - rockchip,rk3036-dw-mshc + # for Rockchip RK322x + - rockchip,rk3228-dw-mshc + # for Rockchip RK3308 + - rockchip,rk3308-dw-mshc + # for Rockchip RK3328 + - rockchip,rk3328-dw-mshc + # for Rockchip RK3368 + - rockchip,rk3368-dw-mshc + # for Rockchip RK3399 + - rockchip,rk3399-dw-mshc + # for Rockchip RV1108 + - rockchip,rv1108-dw-mshc + - const: rockchip,rk3288-dw-mshc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 4 + description: + Handle to "biu" and "ciu" clocks for the bus interface unit clock and + the card interface unit clock. If "ciu-drive" and "ciu-sample" are + specified in clock-names, it should also contain + handles to these clocks. + + clock-names: + minItems: 2 + items: + - const: biu + - const: ciu + - const: ciu-drive + - const: ciu-sample + description: + Apart from the clock-names "biu" and "ciu" two more clocks + "ciu-drive" and "ciu-sample" are supported. They are used + to control the clock phases, "ciu-sample" is required for tuning + high speed modes. + + rockchip,default-sample-phase: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 360 + default: 0 + description: + The default phase to set "ciu-sample" at probing, + low speeds or in case where all phases work at tuning time. + If not specified 0 deg will be used. + + rockchip,desired-num-phases: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 360 + default: 360 + description: + The desired number of times that the host execute tuning when needed. + If not specified, the host will do tuning for 360 times, + namely tuning for each degree. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + #include <dt-bindings/clock/rk3288-cru.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + sdmmc: mmc@ff0c0000 { + compatible = "rockchip,rk3288-dw-mshc"; + reg = <0x0 0xff0c0000 0x0 0x4000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, + <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + resets = <&cru SRST_MMC0>; + reset-names = "reset"; + fifo-depth = <0x100>; + max-frequency = <150000000>; + }; + +... diff --git a/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt index 503c6dbac1b2..69edfd4d3922 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-atmel.txt @@ -5,11 +5,16 @@ Documentation/devicetree/bindings/mmc/mmc.txt and the properties used by the sdhci-of-at91 driver. Required properties: -- compatible: Must be "atmel,sama5d2-sdhci". +- compatible: Must be "atmel,sama5d2-sdhci" or "microchip,sam9x60-sdhci". - clocks: Phandlers to the clocks. -- clock-names: Must be "hclock", "multclk", "baseclk"; +- clock-names: Must be "hclock", "multclk", "baseclk" for + "atmel,sama5d2-sdhci". + Must be "hclock", "multclk" for "microchip,sam9x60-sdhci". Optional properties: +- assigned-clocks: The same with "multclk". +- assigned-clock-rates The rate of "multclk" in order to not rely on the + gck configuration set by previous components. - microchip,sdcal-inverted: when present, polarity on the SDCAL SoC pin is inverted. The default polarity for this signal is described in the datasheet. For instance on SAMA5D2, the pin is usually tied to the GND with a resistor @@ -17,10 +22,12 @@ Optional properties: Example: -sdmmc0: sdio-host@a0000000 { +mmc0: sdio-host@a0000000 { compatible = "atmel,sama5d2-sdhci"; reg = <0xa0000000 0x300>; interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>; clock-names = "hclock", "multclk", "baseclk"; + assigned-clocks = <&sdmmc0_gclk>; + assigned-clock-rates = <480000000>; }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt index da4edb146a98..7ee639b1af03 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt @@ -19,6 +19,7 @@ Required properties: "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4" "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5" "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5" + "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5"; NOTE that some old device tree files may be floating around that only have the string "qcom,sdhci-msm-v4" without the SoC compatible string but doing that should be considered a deprecated practice. diff --git a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt index 72c4dec7e1db..aeb615ef672a 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt @@ -7,6 +7,8 @@ For UHS devices which require tuning, the device tree should have a "cpu_thermal Required properties: - compatible: Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers Should be "ti,k2g-sdhci" for K2G + Should be "ti,am335-sdhci" for am335x controllers + Should be "ti,am437-sdhci" for am437x controllers - ti,hwmods: Must be "mmc<n>", <n> is controller instance starting 1 (Not required for K2G). - pinctrl-names: Should be subset of "default", "hs", "sdr12", "sdr25", "sdr50", @@ -15,6 +17,13 @@ Required properties: "hs200_1_8v", - pinctrl-<n> : Pinctrl states as described in bindings/pinctrl/pinctrl-bindings.txt +Optional properties: +- dmas: List of DMA specifiers with the controller specific format as described + in the generic DMA client binding. A tx and rx specifier is required. +- dma-names: List of DMA request names. These strings correspond 1:1 with the + DMA specifiers listed in dmas. The string naming is to be "tx" + and "rx" for TX and RX DMA requests, respectively. + Example: mmc1: mmc@4809c000 { compatible = "ti,dra7-sdhci"; @@ -22,4 +31,6 @@ Example: ti,hwmods = "mmc1"; bus-width = <4>; vmmc-supply = <&vmmc>; /* phandle to regulator node */ + dmas = <&sdma 61 &sdma 62>; + dma-names = "tx", "rx"; }; diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml new file mode 100644 index 000000000000..890d47a87ac5 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys Designware Mobile Storage Host Controller Common Properties + +allOf: + - $ref: "mmc-controller.yaml#" + +maintainers: + - Ulf Hansson <ulf.hansson@linaro.org> + +# Everything else is described in the common file +properties: + resets: + maxItems: 1 + + reset-names: + const: reset + + clock-frequency: + description: + Should be the frequency (in Hz) of the ciu clock. If this + is specified and the ciu clock is specified then we'll try to set the ciu + clock to this at probe time. + + fifo-depth: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + description: + The maximum size of the tx/rx fifo's. If this property is not + specified, the default value of the fifo size is determined from the + controller registers. + + card-detect-delay: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - default: 0 + description: + Delay in milli-seconds before detecting card after card + insert event. The default value is 0. + + data-addr: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + description: + Override fifo address with value provided by DT. The default FIFO reg + offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A) + by driver. If the controller does not follow this rule, please use + this property to set fifo address in device tree. + + fifo-watermark-aligned: + allOf: + - $ref: /schemas/types.yaml#/definitions/flag + description: + Data done irq is expected if data length is less than + watermark in PIO mode. But fifo watermark is requested to be aligned + with data length in some SoC so that TX/RX irq can be generated with + data done irq. Add this watermark quirk to mark this requirement and + force fifo watermark setting accordingly. + + dmas: + maxItems: 1 + + dma-names: + const: rx-tx diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt deleted file mode 100644 index 7e5e427a22ce..000000000000 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt +++ /dev/null @@ -1,141 +0,0 @@ -* Synopsys Designware Mobile Storage Host Controller - -The Synopsys designware mobile storage host controller is used to interface -a SoC with storage medium such as eMMC or SD/MMC cards. This file documents -differences between the core mmc properties described by mmc.txt and the -properties used by the Synopsys Designware Mobile Storage Host Controller. - -Required Properties: - -* compatible: should be - - snps,dw-mshc: for controllers compliant with synopsys dw-mshc. -* #address-cells: should be 1. -* #size-cells: should be 0. - -# Slots (DEPRECATED): The slot specific information are contained within - child-nodes with each child-node representing a supported slot. There should - be atleast one child node representing a card slot. The name of the child node - representing the slot is recommended to be slot@n where n is the unique number - of the slot connected to the controller. The following are optional properties - which can be included in the slot child node. - - * reg: specifies the physical slot number. The valid values of this - property is 0 to (num-slots -1), where num-slots is the value - specified by the num-slots property. - - * bus-width: as documented in mmc core bindings. - - * wp-gpios: specifies the write protect gpio line. The format of the - gpio specifier depends on the gpio controller. If a GPIO is not used - for write-protect, this property is optional. - - * disable-wp: If the wp-gpios property isn't present then (by default) - we'd assume that the write protect is hooked up directly to the - controller's special purpose write protect line (accessible via - the WRTPRT register). However, it's possible that we simply don't - want write protect. In that case specify 'disable-wp'. - NOTE: This property is not required for slots known to always - connect to eMMC or SDIO cards. - -Optional properties: - -* resets: phandle + reset specifier pair, intended to represent hardware - reset signal present internally in some host controller IC designs. - See Documentation/devicetree/bindings/reset/reset.txt for details. - -* reset-names: request name for using "resets" property. Must be "reset". - (It will be used together with "resets" property.) - -* clocks: from common clock binding: handle to biu and ciu clocks for the - bus interface unit clock and the card interface unit clock. - -* clock-names: from common clock binding: Shall be "biu" and "ciu". - If the biu clock is missing we'll simply skip enabling it. If the - ciu clock is missing we'll just assume that the clock is running at - clock-frequency. It is an error to omit both the ciu clock and the - clock-frequency. - -* clock-frequency: should be the frequency (in Hz) of the ciu clock. If this - is specified and the ciu clock is specified then we'll try to set the ciu - clock to this at probe time. - -* fifo-depth: The maximum size of the tx/rx fifo's. If this property is not - specified, the default value of the fifo size is determined from the - controller registers. - -* card-detect-delay: Delay in milli-seconds before detecting card after card - insert event. The default value is 0. - -* data-addr: Override fifo address with value provided by DT. The default FIFO reg - offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A) by - driver. If the controller does not follow this rule, please use this property - to set fifo address in device tree. - -* fifo-watermark-aligned: Data done irq is expected if data length is less than - watermark in PIO mode. But fifo watermark is requested to be aligned with data - length in some SoC so that TX/RX irq can be generated with data done irq. Add this - watermark quirk to mark this requirement and force fifo watermark setting - accordingly. - -* vmmc-supply: The phandle to the regulator to use for vmmc. If this is - specified we'll defer probe until we can find this regulator. - -* dmas: List of DMA specifiers with the controller specific format as described - in the generic DMA client binding. Refer to dma.txt for details. - -* dma-names: request names for generic DMA client binding. Must be "rx-tx". - Refer to dma.txt for details. - -Aliases: - -- All the MSHC controller nodes should be represented in the aliases node using - the following format 'mshc{n}' where n is a unique number for the alias. - -Example: - -The MSHC controller node can be split into two portions, SoC specific and -board specific portions as listed below. - - dwmmc0@12200000 { - compatible = "snps,dw-mshc"; - clocks = <&clock 351>, <&clock 132>; - clock-names = "biu", "ciu"; - reg = <0x12200000 0x1000>; - interrupts = <0 75 0>; - #address-cells = <1>; - #size-cells = <0>; - data-addr = <0x200>; - fifo-watermark-aligned; - resets = <&rst 20>; - reset-names = "reset"; - }; - -[board specific internal DMA resources] - - dwmmc0@12200000 { - clock-frequency = <400000000>; - clock-freq-min-max = <400000 200000000>; - broken-cd; - fifo-depth = <0x80>; - card-detect-delay = <200>; - vmmc-supply = <&buck8>; - bus-width = <8>; - cap-mmc-highspeed; - cap-sd-highspeed; - }; - -[board specific generic DMA request binding] - - dwmmc0@12200000 { - clock-frequency = <400000000>; - clock-freq-min-max = <400000 200000000>; - broken-cd; - fifo-depth = <0x80>; - card-detect-delay = <200>; - vmmc-supply = <&buck8>; - bus-width = <8>; - cap-mmc-highspeed; - cap-sd-highspeed; - dmas = <&pdma 12>; - dma-names = "rx-tx"; - }; diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml new file mode 100644 index 000000000000..05f9f36dcb75 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys Designware Mobile Storage Host Controller Binding + +allOf: + - $ref: "synopsys-dw-mshc-common.yaml#" + +maintainers: + - Ulf Hansson <ulf.hansson@linaro.org> + +# Everything else is described in the common file +properties: + compatible: + const: snps,dw-mshc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 2 + description: + Handle to "biu" and "ciu" clocks for the + bus interface unit clock and the card interface unit clock. + + clock-names: + items: + - const: biu + - const: ciu + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +examples: + - | + mmc@12200000 { + compatible = "snps,dw-mshc"; + reg = <0x12200000 0x1000>; + interrupts = <0 75 0>; + clocks = <&clock 351>, <&clock 132>; + clock-names = "biu", "ciu"; + dmas = <&pdma 12>; + dma-names = "rx-tx"; + resets = <&rst 20>; + reset-names = "reset"; + vmmc-supply = <&buck8>; + #address-cells = <1>; + #size-cells = <0>; + broken-cd; + bus-width = <8>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + clock-freq-min-max = <400000 200000000>; + clock-frequency = <400000000>; + data-addr = <0x200>; + fifo-depth = <0x80>; + fifo-watermark-aligned; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 74be49cbd87b..18afdd41ea5c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2251,6 +2251,7 @@ L: linux-rockchip@lists.infradead.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git S: Maintained F: Documentation/devicetree/bindings/i2c/i2c-rk3x.txt +F: Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml F: arch/arm/boot/dts/rk3* F: arch/arm/boot/dts/rv1108* F: arch/arm/mach-rockchip/ diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index b696e4598a24..1b3f217a35e2 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -132,27 +132,6 @@ static void of_gpio_flags_quirks(struct device_node *np, int index) { /* - * Handle MMC "cd-inverted" and "wp-inverted" semantics. - */ - if (IS_ENABLED(CONFIG_MMC)) { - /* - * Active low is the default according to the - * SDHCI specification and the device tree - * bindings. However the code in the current - * kernel was written such that the phandle - * flags were always respected, and "cd-inverted" - * would invert the flag from the device phandle. - */ - if (!strcmp(propname, "cd-gpios")) { - if (of_property_read_bool(np, "cd-inverted")) - *flags ^= OF_GPIO_ACTIVE_LOW; - } - if (!strcmp(propname, "wp-gpios")) { - if (of_property_read_bool(np, "wp-inverted")) - *flags ^= OF_GPIO_ACTIVE_LOW; - } - } - /* * Some GPIO fixed regulator quirks. * Note that active low is the default. */ diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 78a16e42f222..bcfbfded9ba3 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -3371,6 +3371,17 @@ int gpiod_is_active_low(const struct gpio_desc *desc) } EXPORT_SYMBOL_GPL(gpiod_is_active_low); +/** + * gpiod_toggle_active_low - toggle whether a GPIO is active-low or not + * @desc: the gpio descriptor to change + */ +void gpiod_toggle_active_low(struct gpio_desc *desc) +{ + VALIDATE_DESC_VOID(desc); + change_bit(FLAG_ACTIVE_LOW, &desc->flags); +} +EXPORT_SYMBOL_GPL(gpiod_toggle_active_low); + /* I/O calls are only valid after configuration completed; the relevant * "is this a valid GPIO" error checks should already have been done. * diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 95b41c0891d0..663d87924e5e 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -1107,7 +1107,7 @@ static void mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req) card->erase_arg == MMC_TRIM_ARG ? INAND_CMD38_ARG_TRIM : INAND_CMD38_ARG_ERASE, - 0); + card->ext_csd.generic_cmd6_time); } if (!err) err = mmc_erase(card, from, nr, card->erase_arg); @@ -1149,7 +1149,7 @@ retry: arg == MMC_SECURE_TRIM1_ARG ? INAND_CMD38_ARG_SECTRIM1 : INAND_CMD38_ARG_SECERASE, - 0); + card->ext_csd.generic_cmd6_time); if (err) goto out_retry; } @@ -1167,7 +1167,7 @@ retry: err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, INAND_CMD38_ARG_EXT_CSD, INAND_CMD38_ARG_SECTRIM2, - 0); + card->ext_csd.generic_cmd6_time); if (err) goto out_retry; } diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index abf8f5eb0a1c..aa54d359dab7 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2330,7 +2330,13 @@ void mmc_rescan(struct work_struct *work) } for (i = 0; i < ARRAY_SIZE(freqs); i++) { - if (!mmc_rescan_try_freq(host, max(freqs[i], host->f_min))) + unsigned int freq = freqs[i]; + if (freq > host->f_max) { + if (i + 1 < ARRAY_SIZE(freqs)) + continue; + freq = host->f_max; + } + if (!mmc_rescan_try_freq(host, max(freq, host->f_min))) break; if (freqs[i] <= host->f_min) break; @@ -2344,7 +2350,7 @@ void mmc_rescan(struct work_struct *work) void mmc_start_host(struct mmc_host *host) { - host->f_init = max(freqs[0], host->f_min); + host->f_init = max(min(freqs[0], host->f_max), host->f_min); host->rescan_disable = 0; host->ios.power_mode = MMC_POWER_UNDEFINED; diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 105b7a7c0251..c8768726d925 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -175,8 +175,6 @@ int mmc_of_parse(struct mmc_host *host) struct device *dev = host->parent; u32 bus_width, drv_type, cd_debounce_delay_ms; int ret; - bool cd_cap_invert, cd_gpio_invert = false; - bool ro_cap_invert, ro_gpio_invert = false; if (!dev || !dev_fwnode(dev)) return 0; @@ -219,10 +217,12 @@ int mmc_of_parse(struct mmc_host *host) */ /* Parse Card Detection */ + if (device_property_read_bool(dev, "non-removable")) { host->caps |= MMC_CAP_NONREMOVABLE; } else { - cd_cap_invert = device_property_read_bool(dev, "cd-inverted"); + if (device_property_read_bool(dev, "cd-inverted")) + host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; if (device_property_read_u32(dev, "cd-debounce-delay-ms", &cd_debounce_delay_ms)) @@ -232,32 +232,19 @@ int mmc_of_parse(struct mmc_host *host) host->caps |= MMC_CAP_NEEDS_POLL; ret = mmc_gpiod_request_cd(host, "cd", 0, false, - cd_debounce_delay_ms * 1000, - &cd_gpio_invert); + cd_debounce_delay_ms * 1000); if (!ret) dev_info(host->parent, "Got CD GPIO\n"); else if (ret != -ENOENT && ret != -ENOSYS) return ret; - - /* - * There are two ways to flag that the CD line is inverted: - * through the cd-inverted flag and by the GPIO line itself - * being inverted from the GPIO subsystem. This is a leftover - * from the times when the GPIO subsystem did not make it - * possible to flag a line as inverted. - * - * If the capability on the host AND the GPIO line are - * both inverted, the end result is that the CD line is - * not inverted. - */ - if (cd_cap_invert ^ cd_gpio_invert) - host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; } /* Parse Write Protection */ - ro_cap_invert = device_property_read_bool(dev, "wp-inverted"); - ret = mmc_gpiod_request_ro(host, "wp", 0, 0, &ro_gpio_invert); + if (device_property_read_bool(dev, "wp-inverted")) + host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; + + ret = mmc_gpiod_request_ro(host, "wp", 0, 0); if (!ret) dev_info(host->parent, "Got WP GPIO\n"); else if (ret != -ENOENT && ret != -ENOSYS) @@ -266,10 +253,6 @@ int mmc_of_parse(struct mmc_host *host) if (device_property_read_bool(dev, "disable-wp")) host->caps2 |= MMC_CAP2_NO_WRITE_PROTECT; - /* See the comment on CD inversion above */ - if (ro_cap_invert ^ ro_gpio_invert) - host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; - if (device_property_read_bool(dev, "cap-sd-highspeed")) host->caps |= MMC_CAP_SD_HIGHSPEED; if (device_property_read_bool(dev, "cap-mmc-highspeed")) diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 09113b9ad679..da425ee2d9bf 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -19,7 +19,9 @@ #include "host.h" #include "mmc_ops.h" -#define MMC_OPS_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */ +#define MMC_OPS_TIMEOUT_MS (10 * 60 * 1000) /* 10min*/ +#define MMC_BKOPS_TIMEOUT_MS (120 * 1000) /* 120s */ +#define MMC_CACHE_FLUSH_TIMEOUT_MS (30 * 1000) /* 30s */ static const u8 tuning_blk_pattern_4bit[] = { 0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc, @@ -458,10 +460,6 @@ static int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms, bool expired = false; bool busy = false; - /* We have an unspecified cmd timeout, use the fallback value. */ - if (!timeout_ms) - timeout_ms = MMC_OPS_TIMEOUT_MS; - /* * In cases when not allowed to poll by using CMD13 or because we aren't * capable of polling by using ->card_busy(), then rely on waiting the @@ -534,14 +532,19 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, mmc_retune_hold(host); + if (!timeout_ms) { + pr_warn("%s: unspecified timeout for CMD6 - use generic\n", + mmc_hostname(host)); + timeout_ms = card->ext_csd.generic_cmd6_time; + } + /* - * If the cmd timeout and the max_busy_timeout of the host are both - * specified, let's validate them. A failure means we need to prevent - * the host from doing hw busy detection, which is done by converting - * to a R1 response instead of a R1B. + * If the max_busy_timeout of the host is specified, make sure it's + * enough to fit the used timeout_ms. In case it's not, let's instruct + * the host to avoid HW busy detection, by converting to a R1 response + * instead of a R1B. */ - if (timeout_ms && host->max_busy_timeout && - (timeout_ms > host->max_busy_timeout)) + if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout)) use_r1b_resp = false; cmd.opcode = MMC_SWITCH; @@ -552,10 +555,6 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, cmd.flags = MMC_CMD_AC; if (use_r1b_resp) { cmd.flags |= MMC_RSP_SPI_R1B | MMC_RSP_R1B; - /* - * A busy_timeout of zero means the host can decide to use - * whatever value it finds suitable. - */ cmd.busy_timeout = timeout_ms; } else { cmd.flags |= MMC_RSP_SPI_R1 | MMC_RSP_R1; @@ -941,7 +940,7 @@ void mmc_run_bkops(struct mmc_card *card) * urgent levels by using an asynchronous background task, when idle. */ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_BKOPS_START, 1, MMC_OPS_TIMEOUT_MS); + EXT_CSD_BKOPS_START, 1, MMC_BKOPS_TIMEOUT_MS); if (err) pr_warn("%s: Error %d starting bkops\n", mmc_hostname(card->host), err); @@ -961,7 +960,8 @@ int mmc_flush_cache(struct mmc_card *card) (card->ext_csd.cache_size > 0) && (card->ext_csd.cache_ctrl & 1)) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_FLUSH_CACHE, 1, 0); + EXT_CSD_FLUSH_CACHE, 1, + MMC_CACHE_FLUSH_TIMEOUT_MS); if (err) pr_err("%s: cache flush error %d\n", mmc_hostname(card->host), err); diff --git a/drivers/mmc/core/slot-gpio.c b/drivers/mmc/core/slot-gpio.c index da2596c5fa28..05e907451df9 100644 --- a/drivers/mmc/core/slot-gpio.c +++ b/drivers/mmc/core/slot-gpio.c @@ -19,7 +19,6 @@ struct mmc_gpio { struct gpio_desc *ro_gpio; struct gpio_desc *cd_gpio; - bool override_cd_active_level; irqreturn_t (*cd_gpio_isr)(int irq, void *dev_id); char *ro_label; char *cd_label; @@ -80,13 +79,6 @@ int mmc_gpio_get_cd(struct mmc_host *host) return -ENOSYS; cansleep = gpiod_cansleep(ctx->cd_gpio); - if (ctx->override_cd_active_level) { - int value = cansleep ? - gpiod_get_raw_value_cansleep(ctx->cd_gpio) : - gpiod_get_raw_value(ctx->cd_gpio); - return !value ^ !!(host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH); - } - return cansleep ? gpiod_get_value_cansleep(ctx->cd_gpio) : gpiod_get_value(ctx->cd_gpio); @@ -168,8 +160,6 @@ EXPORT_SYMBOL(mmc_gpio_set_cd_isr); * @idx: index of the GPIO to obtain in the consumer * @override_active_level: ignore %GPIO_ACTIVE_LOW flag * @debounce: debounce time in microseconds - * @gpio_invert: will return whether the GPIO line is inverted or not, set - * to NULL to ignore * * Note that this must be called prior to mmc_add_host() * otherwise the caller must also call mmc_gpiod_request_cd_irq(). @@ -178,7 +168,7 @@ EXPORT_SYMBOL(mmc_gpio_set_cd_isr); */ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id, unsigned int idx, bool override_active_level, - unsigned int debounce, bool *gpio_invert) + unsigned int debounce) { struct mmc_gpio *ctx = host->slot.handler_priv; struct gpio_desc *desc; @@ -194,10 +184,14 @@ int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id, ctx->cd_debounce_delay_ms = debounce / 1000; } - if (gpio_invert) - *gpio_invert = !gpiod_is_active_low(desc); + /* override forces default (active-low) polarity ... */ + if (override_active_level && !gpiod_is_active_low(desc)) + gpiod_toggle_active_low(desc); + + /* ... or active-high */ + if (host->caps2 & MMC_CAP2_CD_ACTIVE_HIGH) + gpiod_toggle_active_low(desc); - ctx->override_cd_active_level = override_active_level; ctx->cd_gpio = desc; return 0; @@ -218,14 +212,11 @@ EXPORT_SYMBOL(mmc_can_gpio_cd); * @con_id: function within the GPIO consumer * @idx: index of the GPIO to obtain in the consumer * @debounce: debounce time in microseconds - * @gpio_invert: will return whether the GPIO line is inverted or not, - * set to NULL to ignore * * Returns zero on success, else an error. */ int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id, - unsigned int idx, - unsigned int debounce, bool *gpio_invert) + unsigned int idx, unsigned int debounce) { struct mmc_gpio *ctx = host->slot.handler_priv; struct gpio_desc *desc; @@ -241,8 +232,8 @@ int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id, return ret; } - if (gpio_invert) - *gpio_invert = !gpiod_is_active_low(desc); + if (host->caps2 & MMC_CAP2_RO_ACTIVE_HIGH) + gpiod_toggle_active_low(desc); ctx->ro_gpio = desc; diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index d06b2dfe3c95..3a5089f0332c 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -501,6 +501,7 @@ config MMC_SDHCI_MSM depends on ARCH_QCOM || (ARM && COMPILE_TEST) depends on MMC_SDHCI_PLTFM select MMC_SDHCI_IO_ACCESSORS + select MMC_CQHCI help This selects the Secure Digital Host Controller Interface (SDHCI) support present in Qualcomm SOCs. The controller supports @@ -990,6 +991,7 @@ config MMC_SDHCI_BRCMSTB tristate "Broadcom SDIO/SD/MMC support" depends on ARCH_BRCMSTB || BMIPS_GENERIC depends on MMC_SDHCI_PLTFM + select MMC_CQHCI default y help This selects support for the SDIO/SD/MMC Host Controller on @@ -1010,6 +1012,7 @@ config MMC_SDHCI_OMAP depends on MMC_SDHCI_PLTFM && OF select THERMAL imply TI_SOC_THERMAL + select MMC_SDHCI_EXTERNAL_DMA if DMA_ENGINE help This selects the Secure Digital Host Controller Interface (SDHCI) support present in TI's DRA7 SOCs. The controller supports @@ -1040,3 +1043,6 @@ config MMC_OWL help This selects support for the SD/MMC Host Controller on Actions Semi Owl SoCs. + +config MMC_SDHCI_EXTERNAL_DMA + bool diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 6f065bb5c55a..aeaaa5314924 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -2645,7 +2645,7 @@ static int atmci_runtime_resume(struct device *dev) { struct atmel_mci *host = dev_get_drvdata(dev); - pinctrl_pm_select_default_state(dev); + pinctrl_select_default_state(dev); return clk_prepare_enable(host->mck); } diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index bc8aeb47a7b4..8823680ca42c 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -984,12 +984,9 @@ static int au1xmmc_probe(struct platform_device *pdev) goto out2; } - r = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!r) { - dev_err(&pdev->dev, "no IRQ defined\n"); + host->irq = platform_get_irq(pdev, 0); + if (host->irq < 0) goto out3; - } - host->irq = r->start; mmc->ops = &au1xmmc_ops; diff --git a/drivers/mmc/host/bcm2835.c b/drivers/mmc/host/bcm2835.c index 99f61fd2a658..c3d949847cbd 100644 --- a/drivers/mmc/host/bcm2835.c +++ b/drivers/mmc/host/bcm2835.c @@ -1393,7 +1393,17 @@ static int bcm2835_probe(struct platform_device *pdev) host->dma_chan = NULL; host->dma_desc = NULL; - host->dma_chan_rxtx = dma_request_slave_channel(dev, "rx-tx"); + host->dma_chan_rxtx = dma_request_chan(dev, "rx-tx"); + if (IS_ERR(host->dma_chan_rxtx)) { + ret = PTR_ERR(host->dma_chan_rxtx); + host->dma_chan_rxtx = NULL; + + if (ret == -EPROBE_DEFER) + goto err; + + /* Ignore errors to fall back to PIO mode */ + } + clk = devm_clk_get(dev, NULL); if (IS_ERR(clk)) { diff --git a/drivers/mmc/host/cavium-thunderx.c b/drivers/mmc/host/cavium-thunderx.c index eee08d81b242..76013bbbcff3 100644 --- a/drivers/mmc/host/cavium-thunderx.c +++ b/drivers/mmc/host/cavium-thunderx.c @@ -76,8 +76,10 @@ static int thunder_mmc_probe(struct pci_dev *pdev, return ret; host->base = pcim_iomap(pdev, 0, pci_resource_len(pdev, 0)); - if (!host->base) - return -EINVAL; + if (!host->base) { + ret = -EINVAL; + goto error; + } /* On ThunderX these are identical */ host->dma_base = host->base; @@ -86,12 +88,14 @@ static int thunder_mmc_probe(struct pci_dev *pdev, host->reg_off_dma = 0x160; host->clk = devm_clk_get(dev, NULL); - if (IS_ERR(host->clk)) - return PTR_ERR(host->clk); + if (IS_ERR(host->clk)) { + ret = PTR_ERR(host->clk); + goto error; + } ret = clk_prepare_enable(host->clk); if (ret) - return ret; + goto error; host->sys_freq = clk_get_rate(host->clk); spin_lock_init(&host->irq_handler_lock); @@ -157,6 +161,7 @@ error: } } clk_disable_unprepare(host->clk); + pci_release_regions(pdev); return ret; } @@ -175,6 +180,7 @@ static void thunder_mmc_remove(struct pci_dev *pdev) writeq(dma_cfg, host->dma_base + MIO_EMM_DMA_CFG(host)); clk_disable_unprepare(host->clk); + pci_release_regions(pdev); } static const struct pci_device_id thunder_mmc_id_table[] = { diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c index ebfaeb33bc8c..f01fecd75833 100644 --- a/drivers/mmc/host/davinci_mmc.c +++ b/drivers/mmc/host/davinci_mmc.c @@ -1174,13 +1174,13 @@ static int mmc_davinci_parse_pdata(struct mmc_host *mmc) mmc->caps |= pdata->caps; /* Register a cd gpio, if there is not one, enable polling */ - ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL); + ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0); if (ret == -EPROBE_DEFER) return ret; else if (ret) mmc->caps |= MMC_CAP_NEEDS_POLL; - ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0, NULL); + ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0); if (ret == -EPROBE_DEFER) return ret; diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index fc9d4d000f97..bc5278ab5707 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -833,12 +833,14 @@ static int dw_mci_edmac_init(struct dw_mci *host) if (!host->dms) return -ENOMEM; - host->dms->ch = dma_request_slave_channel(host->dev, "rx-tx"); - if (!host->dms->ch) { + host->dms->ch = dma_request_chan(host->dev, "rx-tx"); + if (IS_ERR(host->dms->ch)) { + int ret = PTR_ERR(host->dms->ch); + dev_err(host->dev, "Failed to get external DMA channel.\n"); kfree(host->dms); host->dms = NULL; - return -ENXIO; + return ret; } return 0; diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c index 78383f60a3dc..fbae87d1f017 100644 --- a/drivers/mmc/host/jz4740_mmc.c +++ b/drivers/mmc/host/jz4740_mmc.c @@ -1108,7 +1108,7 @@ static int jz4740_mmc_suspend(struct device *dev) static int jz4740_mmc_resume(struct device *dev) { - return pinctrl_pm_select_default_state(dev); + return pinctrl_select_default_state(dev); } static SIMPLE_DEV_PM_OPS(jz4740_mmc_pm_ops, jz4740_mmc_suspend, diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index e712315c7e8d..35400cf2a2e4 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -161,7 +161,6 @@ struct meson_host { bool dram_access_quirk; struct pinctrl *pinctrl; - struct pinctrl_state *pins_default; struct pinctrl_state *pins_clk_gate; unsigned int bounce_buf_size; @@ -327,7 +326,7 @@ static void meson_mmc_clk_ungate(struct meson_host *host) u32 cfg; if (host->pins_clk_gate) - pinctrl_select_state(host->pinctrl, host->pins_default); + pinctrl_select_default_state(host->dev); /* Make sure the clock is not stopped in the controller */ cfg = readl(host->regs + SD_EMMC_CFG); @@ -1101,13 +1100,6 @@ static int meson_mmc_probe(struct platform_device *pdev) goto free_host; } - host->pins_default = pinctrl_lookup_state(host->pinctrl, - PINCTRL_STATE_DEFAULT); - if (IS_ERR(host->pins_default)) { - ret = PTR_ERR(host->pins_default); - goto free_host; - } - host->pins_clk_gate = pinctrl_lookup_state(host->pinctrl, "clk-gate"); if (IS_ERR(host->pins_clk_gate)) { diff --git a/drivers/mmc/host/meson-mx-sdio.c b/drivers/mmc/host/meson-mx-sdio.c index ba9a63db73da..8b038e7b2cd3 100644 --- a/drivers/mmc/host/meson-mx-sdio.c +++ b/drivers/mmc/host/meson-mx-sdio.c @@ -638,7 +638,6 @@ static int meson_mx_mmc_probe(struct platform_device *pdev) struct platform_device *slot_pdev; struct mmc_host *mmc; struct meson_mx_mmc_host *host; - struct resource *res; int ret, irq; u32 conf; @@ -663,8 +662,7 @@ static int meson_mx_mmc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, host); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - host->base = devm_ioremap_resource(host->controller_dev, res); + host->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(host->base)) { ret = PTR_ERR(host->base); goto error_free_mmc; diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 74c6cfbf9172..951f76dc1ddd 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -1134,17 +1134,22 @@ static void mmc_spi_initsequence(struct mmc_spi_host *host) * SPI protocol. Another is that when chipselect is released while * the card returns BUSY status, the clock must issue several cycles * with chipselect high before the card will stop driving its output. + * + * SPI_CS_HIGH means "asserted" here. In some cases like when using + * GPIOs for chip select, SPI_CS_HIGH is set but this will be logically + * inverted by gpiolib, so if we want to ascertain to drive it high + * we should toggle the default with an XOR as we do here. */ - host->spi->mode |= SPI_CS_HIGH; + host->spi->mode ^= SPI_CS_HIGH; if (spi_setup(host->spi) != 0) { /* Just warn; most cards work without it. */ dev_warn(&host->spi->dev, "can't change chip-select polarity\n"); - host->spi->mode &= ~SPI_CS_HIGH; + host->spi->mode ^= SPI_CS_HIGH; } else { mmc_spi_readbytes(host, 18); - host->spi->mode &= ~SPI_CS_HIGH; + host->spi->mode ^= SPI_CS_HIGH; if (spi_setup(host->spi) != 0) { /* Wot, we can't get the same setup we had before? */ dev_err(&host->spi->dev, @@ -1421,7 +1426,7 @@ static int mmc_spi_probe(struct spi_device *spi) * Index 0 is card detect * Old boardfiles were specifying 1 ms as debounce */ - status = mmc_gpiod_request_cd(mmc, NULL, 0, false, 1000, NULL); + status = mmc_gpiod_request_cd(mmc, NULL, 0, false, 1000); if (status == -EPROBE_DEFER) goto fail_add_host; if (!status) { @@ -1436,7 +1441,7 @@ static int mmc_spi_probe(struct spi_device *spi) mmc_detect_change(mmc, 0); /* Index 1 is write protect/read only */ - status = mmc_gpiod_request_ro(mmc, NULL, 1, 0, NULL); + status = mmc_gpiod_request_ro(mmc, NULL, 1, 0); if (status == -EPROBE_DEFER) goto fail_add_host; if (!status) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 40e72c30ea84..e9ffce8d41ea 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -169,6 +169,8 @@ static struct variant_data variant_ux500 = { .cmdreg_srsp = MCI_CPSM_RESPONSE, .datalength_bits = 24, .datactrl_blocksz = 11, + .datactrl_any_blocksz = true, + .dma_power_of_2 = true, .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN, .st_sdio = true, .st_clkdiv = true, @@ -202,6 +204,8 @@ static struct variant_data variant_ux500v2 = { .datactrl_mask_ddrmode = MCI_DPSM_ST_DDRMODE, .datalength_bits = 24, .datactrl_blocksz = 11, + .datactrl_any_blocksz = true, + .dma_power_of_2 = true, .datactrl_mask_sdio = MCI_DPSM_ST_SDIOEN, .st_sdio = true, .st_clkdiv = true, @@ -261,6 +265,7 @@ static struct variant_data variant_stm32_sdmmc = { .datacnt_useless = true, .datalength_bits = 25, .datactrl_blocksz = 14, + .datactrl_any_blocksz = true, .stm32_idmabsize_mask = GENMASK(12, 5), .busy_timeout = true, .busy_detect = true, @@ -284,6 +289,7 @@ static struct variant_data variant_qcom = { .data_cmd_enable = MCI_CPSM_QCOM_DATCMD, .datalength_bits = 24, .datactrl_blocksz = 11, + .datactrl_any_blocksz = true, .pwrreg_powerup = MCI_PWR_UP, .f_max = 208000000, .explicit_mclk_control = true, @@ -452,10 +458,11 @@ static void mmci_dma_setup(struct mmci_host *host) static int mmci_validate_data(struct mmci_host *host, struct mmc_data *data) { + struct variant_data *variant = host->variant; + if (!data) return 0; - - if (!is_power_of_2(data->blksz)) { + if (!is_power_of_2(data->blksz) && !variant->datactrl_any_blocksz) { dev_err(mmc_dev(host->mmc), "unsupported block size (%d bytes)\n", data->blksz); return -EINVAL; @@ -520,7 +527,9 @@ static int mmci_dma_start(struct mmci_host *host, unsigned int datactrl) "Submit MMCI DMA job, sglen %d blksz %04x blks %04x flags %08x\n", data->sg_len, data->blksz, data->blocks, data->flags); - host->ops->dma_start(host, &datactrl); + ret = host->ops->dma_start(host, &datactrl); + if (ret) + return ret; /* Trigger the DMA transfer */ mmci_write_datactrlreg(host, datactrl); @@ -706,10 +715,20 @@ int mmci_dmae_setup(struct mmci_host *host) host->dma_priv = dmae; - dmae->rx_channel = dma_request_slave_channel(mmc_dev(host->mmc), - "rx"); - dmae->tx_channel = dma_request_slave_channel(mmc_dev(host->mmc), - "tx"); + dmae->rx_channel = dma_request_chan(mmc_dev(host->mmc), "rx"); + if (IS_ERR(dmae->rx_channel)) { + int ret = PTR_ERR(dmae->rx_channel); + dmae->rx_channel = NULL; + return ret; + } + + dmae->tx_channel = dma_request_chan(mmc_dev(host->mmc), "tx"); + if (IS_ERR(dmae->tx_channel)) { + if (PTR_ERR(dmae->tx_channel) == -EPROBE_DEFER) + dev_warn(mmc_dev(host->mmc), + "Deferred probe for TX channel ignored\n"); + dmae->tx_channel = NULL; + } /* * If only an RX channel is specified, the driver will @@ -888,6 +907,18 @@ static int _mmci_dmae_prep_data(struct mmci_host *host, struct mmc_data *data, if (data->blksz * data->blocks <= variant->fifosize) return -EINVAL; + /* + * This is necessary to get SDIO working on the Ux500. We do not yet + * know if this is a bug in: + * - The Ux500 DMA controller (DMA40) + * - The MMCI DMA interface on the Ux500 + * some power of two blocks (such as 64 bytes) are sent regularly + * during SDIO traffic and those work fine so for these we enable DMA + * transfers. + */ + if (host->variant->dma_power_of_2 && !is_power_of_2(data->blksz)) + return -EINVAL; + device = chan->device; nr_sg = dma_map_sg(device->dev, data->sg, data->sg_len, mmc_get_dma_dir(data)); @@ -938,9 +969,14 @@ int mmci_dmae_prep_data(struct mmci_host *host, int mmci_dmae_start(struct mmci_host *host, unsigned int *datactrl) { struct mmci_dmae_priv *dmae = host->dma_priv; + int ret; host->dma_in_progress = true; - dmaengine_submit(dmae->desc_current); + ret = dma_submit_error(dmaengine_submit(dmae->desc_current)); + if (ret < 0) { + host->dma_in_progress = false; + return ret; + } dma_async_issue_pending(dmae->cur); *datactrl |= MCI_DPSM_DMAENABLE; @@ -1321,6 +1357,7 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, } else if (host->variant->busy_timeout && busy_resp && status & MCI_DATATIMEOUT) { cmd->error = -ETIMEDOUT; + host->irq_action = IRQ_WAKE_THREAD; } else { cmd->resp[0] = readl(base + MMCIRESPONSE0); cmd->resp[1] = readl(base + MMCIRESPONSE1); @@ -1339,7 +1376,10 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, return; } } - mmci_request_end(host, host->mrq); + + if (host->irq_action != IRQ_WAKE_THREAD) + mmci_request_end(host, host->mrq); + } else if (sbc) { mmci_start_command(host, host->mrq->cmd, 0); } else if (!host->variant->datactrl_first && @@ -1532,9 +1572,9 @@ static irqreturn_t mmci_irq(int irq, void *dev_id) { struct mmci_host *host = dev_id; u32 status; - int ret = 0; spin_lock(&host->lock); + host->irq_action = IRQ_HANDLED; do { status = readl(host->base + MMCISTATUS); @@ -1574,12 +1614,41 @@ static irqreturn_t mmci_irq(int irq, void *dev_id) if (host->variant->busy_detect_flag) status &= ~host->variant->busy_detect_flag; - ret = 1; } while (status); spin_unlock(&host->lock); - return IRQ_RETVAL(ret); + return host->irq_action; +} + +/* + * mmci_irq_thread() - A threaded IRQ handler that manages a reset of the HW. + * + * A reset is needed for some variants, where a datatimeout for a R1B request + * causes the DPSM to stay busy (non-functional). + */ +static irqreturn_t mmci_irq_thread(int irq, void *dev_id) +{ + struct mmci_host *host = dev_id; + unsigned long flags; + + if (host->rst) { + reset_control_assert(host->rst); + udelay(2); + reset_control_deassert(host->rst); + } + + spin_lock_irqsave(&host->lock, flags); + writel(host->clk_reg, host->base + MMCICLOCK); + writel(host->pwr_reg, host->base + MMCIPOWER); + writel(MCI_IRQENABLE | host->variant->start_err, + host->base + MMCIMASK0); + + host->irq_action = IRQ_HANDLED; + mmci_request_end(host, host->mrq); + spin_unlock_irqrestore(&host->lock, flags); + + return host->irq_action; } static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq) @@ -1704,7 +1773,7 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) pinctrl_select_state(host->pinctrl, host->pins_opendrain); else - pinctrl_select_state(host->pinctrl, host->pins_default); + pinctrl_select_default_state(mmc_dev(mmc)); } /* @@ -1877,14 +1946,6 @@ static int mmci_probe(struct amba_device *dev, goto host_free; } - host->pins_default = pinctrl_lookup_state(host->pinctrl, - PINCTRL_STATE_DEFAULT); - if (IS_ERR(host->pins_default)) { - dev_err(mmc_dev(mmc), "Can't select default pins\n"); - ret = PTR_ERR(host->pins_default); - goto host_free; - } - host->pins_opendrain = pinctrl_lookup_state(host->pinctrl, MMCI_PINCTRL_STATE_OPENDRAIN); if (IS_ERR(host->pins_opendrain)) { @@ -2062,17 +2123,18 @@ static int mmci_probe(struct amba_device *dev, * silently of these do not exist */ if (!np) { - ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL); + ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0); if (ret == -EPROBE_DEFER) goto clk_disable; - ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0, NULL); + ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0); if (ret == -EPROBE_DEFER) goto clk_disable; } - ret = devm_request_irq(&dev->dev, dev->irq[0], mmci_irq, IRQF_SHARED, - DRIVER_NAME " (cmd)", host); + ret = devm_request_threaded_irq(&dev->dev, dev->irq[0], mmci_irq, + mmci_irq_thread, IRQF_SHARED, + DRIVER_NAME " (cmd)", host); if (ret) goto clk_disable; @@ -2203,7 +2265,7 @@ static int mmci_runtime_resume(struct device *dev) struct mmci_host *host = mmc_priv(mmc); clk_prepare_enable(host->clk); mmci_restore(host); - pinctrl_pm_select_default_state(dev); + pinctrl_select_default_state(dev); } return 0; diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 158e1231aa23..ea6a0b5779d4 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -279,7 +279,11 @@ struct mmci_host; * @stm32_clkdiv: true if using a STM32-specific clock divider algorithm * @datactrl_mask_ddrmode: ddr mode mask in datactrl register. * @datactrl_mask_sdio: SDIO enable mask in datactrl register - * @datactrl_blksz: block size in power of two + * @datactrl_blocksz: block size in power of two + * @datactrl_any_blocksz: true if block any block sizes are accepted by + * hardware, such as with some SDIO traffic that send + * odd packets. + * @dma_power_of_2: DMA only works with blocks that are a power of 2. * @datactrl_first: true if data must be setup before send command * @datacnt_useless: true if you could not use datacnt register to read * remaining data @@ -326,6 +330,8 @@ struct variant_data { unsigned int datactrl_mask_ddrmode; unsigned int datactrl_mask_sdio; unsigned int datactrl_blocksz; + u8 datactrl_any_blocksz:1; + u8 dma_power_of_2:1; u8 datactrl_first:1; u8 datacnt_useless:1; u8 st_sdio:1; @@ -404,7 +410,6 @@ struct mmci_host { struct mmci_host_ops *ops; struct variant_data *variant; struct pinctrl *pinctrl; - struct pinctrl_state *pins_default; struct pinctrl_state *pins_opendrain; u8 hw_designer; @@ -412,6 +417,7 @@ struct mmci_host { struct timer_list timer; unsigned int oldstat; + u32 irq_action; /* pio stuff */ struct sg_mapping_iter sg_miter; diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index 010fe29a4888..7726dcf48f2c 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -2194,8 +2194,7 @@ static int msdc_drv_probe(struct platform_device *pdev) if (ret) goto host_free; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - host->base = devm_ioremap_resource(&pdev->dev, res); + host->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(host->base)) { ret = PTR_ERR(host->base); goto host_free; diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index 74a0a7fbbf7f..203b61712601 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -696,16 +696,14 @@ static int mvsd_probe(struct platform_device *pdev) struct mmc_host *mmc = NULL; struct mvsd_host *host = NULL; const struct mbus_dram_target_info *dram; - struct resource *r; int ret, irq; if (!np) { dev_err(&pdev->dev, "no DT node\n"); return -ENODEV; } - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - if (!r || irq < 0) + if (irq < 0) return -ENXIO; mmc = mmc_alloc_host(sizeof(struct mvsd_host), &pdev->dev); @@ -758,7 +756,7 @@ static int mvsd_probe(struct platform_device *pdev) spin_lock_init(&host->lock); - host->base = devm_ioremap_resource(&pdev->dev, r); + host->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(host->base)) { ret = PTR_ERR(host->base); goto out; diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index 011b59a3602e..b3d654c688e5 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -1121,7 +1121,16 @@ static int mxcmci_probe(struct platform_device *pdev) mxcmci_writel(host, host->default_irq_mask, MMC_REG_INT_CNTR); if (!host->pdata) { - host->dma = dma_request_slave_channel(&pdev->dev, "rx-tx"); + host->dma = dma_request_chan(&pdev->dev, "rx-tx"); + if (IS_ERR(host->dma)) { + if (PTR_ERR(host->dma) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto out_clk_put; + } + + /* Ignore errors to fall back to PIO mode */ + host->dma = NULL; + } } else { res = platform_get_resource(pdev, IORESOURCE_DMA, 0); if (res) { diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index 4031217d21c3..d82674aed447 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -623,11 +623,11 @@ static int mxs_mmc_probe(struct platform_device *pdev) goto out_clk_disable; } - ssp->dmach = dma_request_slave_channel(&pdev->dev, "rx-tx"); - if (!ssp->dmach) { + ssp->dmach = dma_request_chan(&pdev->dev, "rx-tx"); + if (IS_ERR(ssp->dmach)) { dev_err(mmc_dev(host->mmc), "%s: failed to request dma\n", __func__); - ret = -ENODEV; + ret = PTR_ERR(ssp->dmach); goto out_clk_disable; } diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 767e964ca5a2..a379c45b985c 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1605,12 +1605,6 @@ static int omap_hsmmc_configure_wake_irq(struct omap_hsmmc_host *host) ret = PTR_ERR(p); goto err_free_irq; } - if (IS_ERR(pinctrl_lookup_state(p, PINCTRL_STATE_DEFAULT))) { - dev_info(host->dev, "missing default pinctrl state\n"); - devm_pinctrl_put(p); - ret = -EINVAL; - goto err_free_irq; - } if (IS_ERR(pinctrl_lookup_state(p, PINCTRL_STATE_IDLE))) { dev_info(host->dev, "missing idle pinctrl state\n"); @@ -2153,14 +2147,14 @@ static int omap_hsmmc_runtime_resume(struct device *dev) if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) && (host->flags & HSMMC_SDIO_IRQ_ENABLED)) { - pinctrl_pm_select_default_state(host->dev); + pinctrl_select_default_state(host->dev); /* irq lost, if pinmux incorrect */ OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); OMAP_HSMMC_WRITE(host->base, ISE, CIRQ_EN); OMAP_HSMMC_WRITE(host->base, IE, CIRQ_EN); } else { - pinctrl_pm_select_default_state(host->dev); + pinctrl_select_default_state(host->dev); } spin_unlock_irqrestore(&host->irq_lock, flags); return 0; diff --git a/drivers/mmc/host/owl-mmc.c b/drivers/mmc/host/owl-mmc.c index 771e3d00f1bb..01ffe51f413d 100644 --- a/drivers/mmc/host/owl-mmc.c +++ b/drivers/mmc/host/owl-mmc.c @@ -616,10 +616,10 @@ static int owl_mmc_probe(struct platform_device *pdev) pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; - owl_host->dma = dma_request_slave_channel(&pdev->dev, "mmc"); - if (!owl_host->dma) { + owl_host->dma = dma_request_chan(&pdev->dev, "mmc"); + if (IS_ERR(owl_host->dma)) { dev_err(owl_host->dev, "Failed to get external DMA channel.\n"); - ret = -ENXIO; + ret = PTR_ERR(owl_host->dma); goto err_free_host; } diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c index 024acc1b0a2e..3a9333475a2b 100644 --- a/drivers/mmc/host/pxamci.c +++ b/drivers/mmc/host/pxamci.c @@ -710,17 +710,19 @@ static int pxamci_probe(struct platform_device *pdev) platform_set_drvdata(pdev, mmc); - host->dma_chan_rx = dma_request_slave_channel(dev, "rx"); - if (host->dma_chan_rx == NULL) { + host->dma_chan_rx = dma_request_chan(dev, "rx"); + if (IS_ERR(host->dma_chan_rx)) { dev_err(dev, "unable to request rx dma channel\n"); - ret = -ENODEV; + ret = PTR_ERR(host->dma_chan_rx); + host->dma_chan_rx = NULL; goto out; } - host->dma_chan_tx = dma_request_slave_channel(dev, "tx"); - if (host->dma_chan_tx == NULL) { + host->dma_chan_tx = dma_request_chan(dev, "tx"); + if (IS_ERR(host->dma_chan_tx)) { dev_err(dev, "unable to request tx dma channel\n"); - ret = -ENODEV; + ret = PTR_ERR(host->dma_chan_tx); + host->dma_chan_tx = NULL; goto out; } @@ -734,22 +736,22 @@ static int pxamci_probe(struct platform_device *pdev) } /* FIXME: should we pass detection delay to debounce? */ - ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL); + ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0); if (ret && ret != -ENOENT) { dev_err(dev, "Failed requesting gpio_cd\n"); goto out; } - ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0, NULL); + if (!host->pdata->gpio_card_ro_invert) + mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; + + ret = mmc_gpiod_request_ro(mmc, "wp", 0, 0); if (ret && ret != -ENOENT) { dev_err(dev, "Failed requesting gpio_ro\n"); goto out; } - if (!ret) { + if (!ret) host->use_ro_gpio = true; - mmc->caps2 |= host->pdata->gpio_card_ro_invert ? - 0 : MMC_CAP2_RO_ACTIVE_HIGH; - } if (host->pdata->init) host->pdata->init(dev, pxamci_detect_irq, mmc); diff --git a/drivers/mmc/host/renesas_sdhi.h b/drivers/mmc/host/renesas_sdhi.h index c0504aa90857..f524251d5113 100644 --- a/drivers/mmc/host/renesas_sdhi.h +++ b/drivers/mmc/host/renesas_sdhi.h @@ -14,8 +14,8 @@ struct renesas_sdhi_scc { unsigned long clk_rate; /* clock rate for SDR104 */ - u32 tap; /* sampling clock position for SDR104 */ - u32 tap_hs400; /* sampling clock position for HS400 */ + u32 tap; /* sampling clock position for SDR104/HS400 (8 TAP) */ + u32 tap_hs400_4tap; /* sampling clock position for HS400 (4 TAP) */ }; struct renesas_sdhi_of_data { @@ -33,6 +33,11 @@ struct renesas_sdhi_of_data { unsigned short max_segs; }; +struct renesas_sdhi_quirks { + bool hs400_disabled; + bool hs400_4taps; +}; + struct tmio_mmc_dma { enum dma_slave_buswidth dma_buswidth; bool (*filter)(struct dma_chan *chan, void *arg); @@ -46,6 +51,7 @@ struct renesas_sdhi { struct clk *clk_cd; struct tmio_mmc_data mmc_data; struct tmio_mmc_dma dma_priv; + const struct renesas_sdhi_quirks *quirks; struct pinctrl *pinctrl; struct pinctrl_state *pins_default, *pins_uhs; void __iomem *scc_ctl; diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c index 234551a68739..35cb24cd45b4 100644 --- a/drivers/mmc/host/renesas_sdhi_core.c +++ b/drivers/mmc/host/renesas_sdhi_core.c @@ -46,11 +46,6 @@ #define SDHI_VER_GEN3_SD 0xcc10 #define SDHI_VER_GEN3_SDMMC 0xcd10 -struct renesas_sdhi_quirks { - bool hs400_disabled; - bool hs400_4taps; -}; - static void renesas_sdhi_sdbuf_width(struct tmio_mmc_host *host, int width) { u32 val; @@ -355,7 +350,7 @@ static void renesas_sdhi_hs400_complete(struct tmio_mmc_host *host) 0x4 << SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_SHIFT); - if (host->pdata->flags & TMIO_MMC_HAVE_4TAP_HS400) + if (priv->quirks && priv->quirks->hs400_4taps) sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, host->tap_set / 2); @@ -493,7 +488,7 @@ static int renesas_sdhi_select_tuning(struct tmio_mmc_host *host) static bool renesas_sdhi_check_scc_error(struct tmio_mmc_host *host) { struct renesas_sdhi *priv = host_to_priv(host); - bool use_4tap = host->pdata->flags & TMIO_MMC_HAVE_4TAP_HS400; + bool use_4tap = priv->quirks && priv->quirks->hs400_4taps; /* * Skip checking SCC errors when running on 4 taps in HS400 mode as @@ -627,10 +622,10 @@ static const struct renesas_sdhi_quirks sdhi_quirks_nohs400 = { }; static const struct soc_device_attribute sdhi_quirks_match[] = { + { .soc_id = "r8a774a1", .revision = "ES1.[012]", .data = &sdhi_quirks_4tap_nohs400 }, { .soc_id = "r8a7795", .revision = "ES1.*", .data = &sdhi_quirks_4tap_nohs400 }, { .soc_id = "r8a7795", .revision = "ES2.0", .data = &sdhi_quirks_4tap }, { .soc_id = "r8a7796", .revision = "ES1.[012]", .data = &sdhi_quirks_4tap_nohs400 }, - { .soc_id = "r8a774a1", .revision = "ES1.[012]", .data = &sdhi_quirks_4tap_nohs400 }, { .soc_id = "r8a77980", .data = &sdhi_quirks_nohs400 }, { /* Sentinel. */ }, }; @@ -665,6 +660,7 @@ int renesas_sdhi_probe(struct platform_device *pdev, if (!priv) return -ENOMEM; + priv->quirks = quirks; mmc_data = &priv->mmc_data; dma_priv = &priv->dma_priv; @@ -724,9 +720,6 @@ int renesas_sdhi_probe(struct platform_device *pdev, if (quirks && quirks->hs400_disabled) host->mmc->caps2 &= ~(MMC_CAP2_HS400 | MMC_CAP2_HS400_ES); - if (quirks && quirks->hs400_4taps) - mmc_data->flags |= TMIO_MMC_HAVE_4TAP_HS400; - /* For some SoC, we disable internal WP. GPIO may override this */ if (mmc_can_gpio_ro(host->mmc)) mmc_data->capabilities2 &= ~MMC_CAP2_NO_WRITE_PROTECT; @@ -800,20 +793,23 @@ int renesas_sdhi_probe(struct platform_device *pdev, host->mmc->caps2 & (MMC_CAP2_HS200_1_8V_SDR | MMC_CAP2_HS400_1_8V))) { const struct renesas_sdhi_scc *taps = of_data->taps; + bool use_4tap = priv->quirks && priv->quirks->hs400_4taps; bool hit = false; for (i = 0; i < of_data->taps_num; i++) { if (taps[i].clk_rate == 0 || taps[i].clk_rate == host->mmc->f_max) { priv->scc_tappos = taps->tap; - priv->scc_tappos_hs400 = taps->tap_hs400; + priv->scc_tappos_hs400 = use_4tap ? + taps->tap_hs400_4tap : + taps->tap; hit = true; break; } } if (!hit) - dev_warn(&host->pdev->dev, "Unknown clock rate for SDR104\n"); + dev_warn(&host->pdev->dev, "Unknown clock rate for tuning\n"); host->init_tuning = renesas_sdhi_init_tuning; host->prepare_tuning = renesas_sdhi_prepare_tuning; diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c index 18839a10594c..47ac53e91241 100644 --- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c +++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c @@ -82,7 +82,7 @@ static struct renesas_sdhi_scc rcar_gen3_scc_taps[] = { { .clk_rate = 0, .tap = 0x00000300, - .tap_hs400 = 0x00000704, + .tap_hs400_4tap = 0x00000100, }, }; @@ -298,38 +298,23 @@ static const struct tmio_mmc_dma_ops renesas_sdhi_internal_dmac_dma_ops = { * Whitelist of specific R-Car Gen3 SoC ES versions to use this DMAC * implementation as others may use a different implementation. */ -static const struct soc_device_attribute soc_whitelist[] = { - /* specific ones */ +static const struct soc_device_attribute soc_dma_quirks[] = { { .soc_id = "r7s9210", .data = (void *)BIT(SDHI_INTERNAL_DMAC_ADDR_MODE_FIXED_ONLY) }, { .soc_id = "r8a7795", .revision = "ES1.*", .data = (void *)BIT(SDHI_INTERNAL_DMAC_ONE_RX_ONLY) }, { .soc_id = "r8a7796", .revision = "ES1.0", .data = (void *)BIT(SDHI_INTERNAL_DMAC_ONE_RX_ONLY) }, - /* generic ones */ - { .soc_id = "r8a774a1" }, - { .soc_id = "r8a774b1" }, - { .soc_id = "r8a774c0" }, - { .soc_id = "r8a77470" }, - { .soc_id = "r8a7795" }, - { .soc_id = "r8a7796" }, - { .soc_id = "r8a77965" }, - { .soc_id = "r8a77970" }, - { .soc_id = "r8a77980" }, - { .soc_id = "r8a77990" }, - { .soc_id = "r8a77995" }, { /* sentinel */ } }; static int renesas_sdhi_internal_dmac_probe(struct platform_device *pdev) { - const struct soc_device_attribute *soc = soc_device_match(soc_whitelist); + const struct soc_device_attribute *soc = soc_device_match(soc_dma_quirks); struct device *dev = &pdev->dev; - if (!soc) - return -ENODEV; - - global_flags |= (unsigned long)soc->data; + if (soc) + global_flags |= (unsigned long)soc->data; dev->dma_parms = devm_kzalloc(dev, sizeof(*dev->dma_parms), GFP_KERNEL); if (!dev->dma_parms) diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index bce9c33bc4b5..1e616ae56b13 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -1505,14 +1505,14 @@ static int s3cmci_probe_pdata(struct s3cmci_host *host) mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; /* If we get -ENOENT we have no card detect GPIO line */ - ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL); + ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0); if (ret != -ENOENT) { dev_err(&pdev->dev, "error requesting GPIO for CD %d\n", ret); return ret; } - ret = mmc_gpiod_request_ro(host->mmc, "wp", 0, 0, NULL); + ret = mmc_gpiod_request_ro(host->mmc, "wp", 0, 0); if (ret != -ENOENT) { dev_err(&pdev->dev, "error requesting GPIO for WP %d\n", ret); diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index 105e73d4a3b9..dd908577a9dc 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -752,7 +752,7 @@ static int sdhci_acpi_probe(struct platform_device *pdev) if (sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD)) { bool v = sdhci_acpi_flag(c, SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL); - err = mmc_gpiod_request_cd(host->mmc, NULL, 0, v, 0, NULL); + err = mmc_gpiod_request_cd(host->mmc, NULL, 0, v, 0); if (err) { if (err == -EPROBE_DEFER) goto err_free; diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c index 73bb440aaf93..ad01f6451a95 100644 --- a/drivers/mmc/host/sdhci-brcmstb.c +++ b/drivers/mmc/host/sdhci-brcmstb.c @@ -9,29 +9,236 @@ #include <linux/mmc/host.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/bitops.h> +#include <linux/delay.h> #include "sdhci-pltfm.h" +#include "cqhci.h" -static const struct sdhci_ops sdhci_brcmstb_ops = { +#define SDHCI_VENDOR 0x78 +#define SDHCI_VENDOR_ENHANCED_STRB 0x1 + +#define BRCMSTB_PRIV_FLAGS_NO_64BIT BIT(0) +#define BRCMSTB_PRIV_FLAGS_BROKEN_TIMEOUT BIT(1) + +#define SDHCI_ARASAN_CQE_BASE_ADDR 0x200 + +struct sdhci_brcmstb_priv { + void __iomem *cfg_regs; + bool has_cqe; +}; + +struct brcmstb_match_priv { + void (*hs400es)(struct mmc_host *mmc, struct mmc_ios *ios); + struct sdhci_ops *ops; + unsigned int flags; +}; + +static void sdhci_brcmstb_hs400es(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + + u32 reg; + + dev_dbg(mmc_dev(mmc), "%s(): Setting HS400-Enhanced-Strobe mode\n", + __func__); + reg = readl(host->ioaddr + SDHCI_VENDOR); + if (ios->enhanced_strobe) + reg |= SDHCI_VENDOR_ENHANCED_STRB; + else + reg &= ~SDHCI_VENDOR_ENHANCED_STRB; + writel(reg, host->ioaddr + SDHCI_VENDOR); +} + +static void sdhci_brcmstb_set_clock(struct sdhci_host *host, unsigned int clock) +{ + u16 clk; + + host->mmc->actual_clock = 0; + + clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock); + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + if (clock == 0) + return; + + sdhci_enable_clk(host, clk); +} + +static void sdhci_brcmstb_set_uhs_signaling(struct sdhci_host *host, + unsigned int timing) +{ + u16 ctrl_2; + + dev_dbg(mmc_dev(host->mmc), "%s: Setting UHS signaling for %d timing\n", + __func__, timing); + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + /* Select Bus Speed Mode for host */ + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; + if ((timing == MMC_TIMING_MMC_HS200) || + (timing == MMC_TIMING_UHS_SDR104)) + ctrl_2 |= SDHCI_CTRL_UHS_SDR104; + else if (timing == MMC_TIMING_UHS_SDR12) + ctrl_2 |= SDHCI_CTRL_UHS_SDR12; + else if (timing == MMC_TIMING_SD_HS || + timing == MMC_TIMING_MMC_HS || + timing == MMC_TIMING_UHS_SDR25) + ctrl_2 |= SDHCI_CTRL_UHS_SDR25; + else if (timing == MMC_TIMING_UHS_SDR50) + ctrl_2 |= SDHCI_CTRL_UHS_SDR50; + else if ((timing == MMC_TIMING_UHS_DDR50) || + (timing == MMC_TIMING_MMC_DDR52)) + ctrl_2 |= SDHCI_CTRL_UHS_DDR50; + else if (timing == MMC_TIMING_MMC_HS400) + ctrl_2 |= SDHCI_CTRL_HS400; /* Non-standard */ + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); +} + +static void sdhci_brcmstb_dumpregs(struct mmc_host *mmc) +{ + sdhci_dumpregs(mmc_priv(mmc)); +} + +static void sdhci_brcmstb_cqe_enable(struct mmc_host *mmc) +{ + struct sdhci_host *host = mmc_priv(mmc); + u32 reg; + + reg = sdhci_readl(host, SDHCI_PRESENT_STATE); + while (reg & SDHCI_DATA_AVAILABLE) { + sdhci_readl(host, SDHCI_BUFFER); + reg = sdhci_readl(host, SDHCI_PRESENT_STATE); + } + + sdhci_cqe_enable(mmc); +} + +static const struct cqhci_host_ops sdhci_brcmstb_cqhci_ops = { + .enable = sdhci_brcmstb_cqe_enable, + .disable = sdhci_cqe_disable, + .dumpregs = sdhci_brcmstb_dumpregs, +}; + +static struct sdhci_ops sdhci_brcmstb_ops = { .set_clock = sdhci_set_clock, .set_bus_width = sdhci_set_bus_width, .reset = sdhci_reset, .set_uhs_signaling = sdhci_set_uhs_signaling, }; -static const struct sdhci_pltfm_data sdhci_brcmstb_pdata = { +static struct sdhci_ops sdhci_brcmstb_ops_7216 = { + .set_clock = sdhci_brcmstb_set_clock, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_brcmstb_set_uhs_signaling, +}; + +static struct brcmstb_match_priv match_priv_7425 = { + .flags = BRCMSTB_PRIV_FLAGS_NO_64BIT | + BRCMSTB_PRIV_FLAGS_BROKEN_TIMEOUT, .ops = &sdhci_brcmstb_ops, }; +static struct brcmstb_match_priv match_priv_7445 = { + .flags = BRCMSTB_PRIV_FLAGS_BROKEN_TIMEOUT, + .ops = &sdhci_brcmstb_ops, +}; + +static const struct brcmstb_match_priv match_priv_7216 = { + .hs400es = sdhci_brcmstb_hs400es, + .ops = &sdhci_brcmstb_ops_7216, +}; + +static const struct of_device_id sdhci_brcm_of_match[] = { + { .compatible = "brcm,bcm7425-sdhci", .data = &match_priv_7425 }, + { .compatible = "brcm,bcm7445-sdhci", .data = &match_priv_7445 }, + { .compatible = "brcm,bcm7216-sdhci", .data = &match_priv_7216 }, + {}, +}; + +static u32 sdhci_brcmstb_cqhci_irq(struct sdhci_host *host, u32 intmask) +{ + int cmd_error = 0; + int data_error = 0; + + if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error)) + return intmask; + + cqhci_irq(host->mmc, intmask, cmd_error, data_error); + + return 0; +} + +static int sdhci_brcmstb_add_host(struct sdhci_host *host, + struct sdhci_brcmstb_priv *priv) +{ + struct cqhci_host *cq_host; + bool dma64; + int ret; + + if (!priv->has_cqe) + return sdhci_add_host(host); + + dev_dbg(mmc_dev(host->mmc), "CQE is enabled\n"); + host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD; + ret = sdhci_setup_host(host); + if (ret) + return ret; + + cq_host = devm_kzalloc(mmc_dev(host->mmc), + sizeof(*cq_host), GFP_KERNEL); + if (!cq_host) { + ret = -ENOMEM; + goto cleanup; + } + + cq_host->mmio = host->ioaddr + SDHCI_ARASAN_CQE_BASE_ADDR; + cq_host->ops = &sdhci_brcmstb_cqhci_ops; + + dma64 = host->flags & SDHCI_USE_64_BIT_DMA; + if (dma64) { + dev_dbg(mmc_dev(host->mmc), "Using 64 bit DMA\n"); + cq_host->caps |= CQHCI_TASK_DESC_SZ_128; + cq_host->quirks |= CQHCI_QUIRK_SHORT_TXFR_DESC_SZ; + } + + ret = cqhci_init(cq_host, host->mmc, dma64); + if (ret) + goto cleanup; + + ret = __sdhci_add_host(host); + if (ret) + goto cleanup; + + return 0; + +cleanup: + sdhci_cleanup_host(host); + return ret; +} + static int sdhci_brcmstb_probe(struct platform_device *pdev) { - struct sdhci_host *host; + const struct brcmstb_match_priv *match_priv; + struct sdhci_pltfm_data brcmstb_pdata; struct sdhci_pltfm_host *pltfm_host; + const struct of_device_id *match; + struct sdhci_brcmstb_priv *priv; + struct sdhci_host *host; + struct resource *iomem; + bool has_cqe = false; struct clk *clk; int res; + match = of_match_node(sdhci_brcm_of_match, pdev->dev.of_node); + match_priv = match->data; + + dev_dbg(&pdev->dev, "Probe found match for %s\n", match->compatible); + clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) { + if (PTR_ERR(clk) == -EPROBE_DEFER) + return -EPROBE_DEFER; dev_err(&pdev->dev, "Clock not found in Device Tree\n"); clk = NULL; } @@ -39,36 +246,64 @@ static int sdhci_brcmstb_probe(struct platform_device *pdev) if (res) return res; - host = sdhci_pltfm_init(pdev, &sdhci_brcmstb_pdata, 0); + memset(&brcmstb_pdata, 0, sizeof(brcmstb_pdata)); + if (device_property_read_bool(&pdev->dev, "supports-cqe")) { + has_cqe = true; + match_priv->ops->irq = sdhci_brcmstb_cqhci_irq; + } + brcmstb_pdata.ops = match_priv->ops; + host = sdhci_pltfm_init(pdev, &brcmstb_pdata, + sizeof(struct sdhci_brcmstb_priv)); if (IS_ERR(host)) { res = PTR_ERR(host); goto err_clk; } + pltfm_host = sdhci_priv(host); + priv = sdhci_pltfm_priv(pltfm_host); + priv->has_cqe = has_cqe; + + /* Map in the non-standard CFG registers */ + iomem = platform_get_resource(pdev, IORESOURCE_MEM, 1); + priv->cfg_regs = devm_ioremap_resource(&pdev->dev, iomem); + if (IS_ERR(priv->cfg_regs)) { + res = PTR_ERR(priv->cfg_regs); + goto err; + } + sdhci_get_of_property(pdev); res = mmc_of_parse(host->mmc); if (res) goto err; /* + * If the chip has enhanced strobe and it's enabled, add + * callback + */ + if (match_priv->hs400es && + (host->mmc->caps2 & MMC_CAP2_HS400_ES)) + host->mmc_host_ops.hs400_enhanced_strobe = match_priv->hs400es; + + /* * Supply the existing CAPS, but clear the UHS modes. This * will allow these modes to be specified by device tree * properties through mmc_of_parse(). */ host->caps = sdhci_readl(host, SDHCI_CAPABILITIES); - if (of_device_is_compatible(pdev->dev.of_node, "brcm,bcm7425-sdhci")) + if (match_priv->flags & BRCMSTB_PRIV_FLAGS_NO_64BIT) host->caps &= ~SDHCI_CAN_64BIT; host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1); host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 | - SDHCI_SUPPORT_DDR50); - host->quirks |= SDHCI_QUIRK_MISSING_CAPS | - SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; + SDHCI_SUPPORT_DDR50); + host->quirks |= SDHCI_QUIRK_MISSING_CAPS; + + if (match_priv->flags & BRCMSTB_PRIV_FLAGS_BROKEN_TIMEOUT) + host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; - res = sdhci_add_host(host); + res = sdhci_brcmstb_add_host(host, priv); if (res) goto err; - pltfm_host = sdhci_priv(host); pltfm_host->clk = clk; return res; @@ -79,11 +314,15 @@ err_clk: return res; } -static const struct of_device_id sdhci_brcm_of_match[] = { - { .compatible = "brcm,bcm7425-sdhci" }, - { .compatible = "brcm,bcm7445-sdhci" }, - {}, -}; +static void sdhci_brcmstb_shutdown(struct platform_device *pdev) +{ + int ret; + + ret = sdhci_pltfm_unregister(pdev); + if (ret) + dev_err(&pdev->dev, "failed to shutdown\n"); +} + MODULE_DEVICE_TABLE(of, sdhci_brcm_of_match); static struct platform_driver sdhci_brcmstb_driver = { @@ -94,6 +333,7 @@ static struct platform_driver sdhci_brcmstb_driver = { }, .probe = sdhci_brcmstb_probe, .remove = sdhci_pltfm_unregister, + .shutdown = sdhci_brcmstb_shutdown, }; module_platform_driver(sdhci_brcmstb_driver); diff --git a/drivers/mmc/host/sdhci-cadence.c b/drivers/mmc/host/sdhci-cadence.c index ae0ec27dd7cc..5827d3751b81 100644 --- a/drivers/mmc/host/sdhci-cadence.c +++ b/drivers/mmc/host/sdhci-cadence.c @@ -158,7 +158,7 @@ static int sdhci_cdns_phy_init(struct sdhci_cdns_priv *priv) return 0; } -static inline void *sdhci_cdns_priv(struct sdhci_host *host) +static void *sdhci_cdns_priv(struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 1c988d6a2433..382f25b2fa45 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -224,7 +224,6 @@ static struct esdhc_soc_data usdhc_imx8qxp_data = { struct pltfm_imx_data { u32 scratchpad; struct pinctrl *pinctrl; - struct pinctrl_state *pins_default; struct pinctrl_state *pins_100mhz; struct pinctrl_state *pins_200mhz; const struct esdhc_soc_data *socdata; @@ -951,7 +950,6 @@ static int esdhc_change_pinstate(struct sdhci_host *host, dev_dbg(mmc_dev(host->mmc), "change pinctrl state for uhs %d\n", uhs); if (IS_ERR(imx_data->pinctrl) || - IS_ERR(imx_data->pins_default) || IS_ERR(imx_data->pins_100mhz) || IS_ERR(imx_data->pins_200mhz)) return -EINVAL; @@ -968,7 +966,7 @@ static int esdhc_change_pinstate(struct sdhci_host *host, break; default: /* back to default state for other legacy timing */ - pinctrl = imx_data->pins_default; + return pinctrl_select_default_state(mmc_dev(host->mmc)); } return pinctrl_select_state(imx_data->pinctrl, pinctrl); @@ -1338,7 +1336,7 @@ sdhci_esdhc_imx_probe_dt(struct platform_device *pdev, mmc_of_parse_voltage(np, &host->ocr_mask); - if (esdhc_is_usdhc(imx_data) && !IS_ERR(imx_data->pins_default)) { + if (esdhc_is_usdhc(imx_data)) { imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl, ESDHC_PINCTRL_STATE_100MHZ); imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl, @@ -1381,19 +1379,20 @@ static int sdhci_esdhc_imx_probe_nondt(struct platform_device *pdev, host->mmc->parent->platform_data); /* write_protect */ if (boarddata->wp_type == ESDHC_WP_GPIO) { - err = mmc_gpiod_request_ro(host->mmc, "wp", 0, 0, NULL); + host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; + + err = mmc_gpiod_request_ro(host->mmc, "wp", 0, 0); if (err) { dev_err(mmc_dev(host->mmc), "failed to request write-protect gpio!\n"); return err; } - host->mmc->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; } /* card_detect */ switch (boarddata->cd_type) { case ESDHC_CD_GPIO: - err = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0, NULL); + err = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0); if (err) { dev_err(mmc_dev(host->mmc), "failed to request card-detect gpio!\n"); @@ -1492,11 +1491,6 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) goto disable_ahb_clk; } - imx_data->pins_default = pinctrl_lookup_state(imx_data->pinctrl, - PINCTRL_STATE_DEFAULT); - if (IS_ERR(imx_data->pins_default)) - dev_warn(mmc_dev(host->mmc), "could not get default state\n"); - if (esdhc_is_usdhc(imx_data)) { host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN; host->mmc->caps |= MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR; diff --git a/drivers/mmc/host/sdhci-milbeaut.c b/drivers/mmc/host/sdhci-milbeaut.c index a1aa21b9ae1c..92f30a1db435 100644 --- a/drivers/mmc/host/sdhci-milbeaut.c +++ b/drivers/mmc/host/sdhci-milbeaut.c @@ -242,15 +242,12 @@ static int sdhci_milbeaut_probe(struct platform_device *pdev) { struct sdhci_host *host; struct device *dev = &pdev->dev; - struct resource *res; int irq, ret = 0; struct f_sdhost_priv *priv; irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(dev, "%s: no irq specified\n", __func__); + if (irq < 0) return irq; - } host = sdhci_alloc_host(dev, sizeof(struct f_sdhost_priv)); if (IS_ERR(host)) @@ -280,8 +277,7 @@ static int sdhci_milbeaut_probe(struct platform_device *pdev) host->ops = &sdhci_milbeaut_ops; host->irq = irq; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - host->ioaddr = devm_ioremap_resource(&pdev->dev, res); + host->ioaddr = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(host->ioaddr)) { ret = PTR_ERR(host->ioaddr); goto err; diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 3d0bb5e2e09b..c3a160c18047 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -15,6 +15,7 @@ #include <linux/regulator/consumer.h> #include "sdhci-pltfm.h" +#include "cqhci.h" #define CORE_MCI_VERSION 0x50 #define CORE_VERSION_MAJOR_SHIFT 28 @@ -122,6 +123,10 @@ #define msm_host_writel(msm_host, val, host, offset) \ msm_host->var_ops->msm_writel_relaxed(val, host, offset) +/* CQHCI vendor specific registers */ +#define CQHCI_VENDOR_CFG1 0xA00 +#define CQHCI_VENDOR_DIS_RST_ON_CQ_EN (0x3 << 13) + struct sdhci_msm_offset { u32 core_hc_mode; u32 core_mci_data_cnt; @@ -1567,6 +1572,127 @@ out: __sdhci_msm_set_clock(host, clock); } +/*****************************************************************************\ + * * + * MSM Command Queue Engine (CQE) * + * * +\*****************************************************************************/ + +static u32 sdhci_msm_cqe_irq(struct sdhci_host *host, u32 intmask) +{ + int cmd_error = 0; + int data_error = 0; + + if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error)) + return intmask; + + cqhci_irq(host->mmc, intmask, cmd_error, data_error); + return 0; +} + +void sdhci_msm_cqe_disable(struct mmc_host *mmc, bool recovery) +{ + struct sdhci_host *host = mmc_priv(mmc); + unsigned long flags; + u32 ctrl; + + /* + * When CQE is halted, the legacy SDHCI path operates only + * on 16-byte descriptors in 64bit mode. + */ + if (host->flags & SDHCI_USE_64_BIT_DMA) + host->desc_sz = 16; + + spin_lock_irqsave(&host->lock, flags); + + /* + * During CQE command transfers, command complete bit gets latched. + * So s/w should clear command complete interrupt status when CQE is + * either halted or disabled. Otherwise unexpected SDCHI legacy + * interrupt gets triggered when CQE is halted/disabled. + */ + ctrl = sdhci_readl(host, SDHCI_INT_ENABLE); + ctrl |= SDHCI_INT_RESPONSE; + sdhci_writel(host, ctrl, SDHCI_INT_ENABLE); + sdhci_writel(host, SDHCI_INT_RESPONSE, SDHCI_INT_STATUS); + + spin_unlock_irqrestore(&host->lock, flags); + + sdhci_cqe_disable(mmc, recovery); +} + +static const struct cqhci_host_ops sdhci_msm_cqhci_ops = { + .enable = sdhci_cqe_enable, + .disable = sdhci_msm_cqe_disable, +}; + +static int sdhci_msm_cqe_add_host(struct sdhci_host *host, + struct platform_device *pdev) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); + struct cqhci_host *cq_host; + bool dma64; + u32 cqcfg; + int ret; + + /* + * When CQE is halted, SDHC operates only on 16byte ADMA descriptors. + * So ensure ADMA table is allocated for 16byte descriptors. + */ + if (host->caps & SDHCI_CAN_64BIT) + host->alloc_desc_sz = 16; + + ret = sdhci_setup_host(host); + if (ret) + return ret; + + cq_host = cqhci_pltfm_init(pdev); + if (IS_ERR(cq_host)) { + ret = PTR_ERR(cq_host); + dev_err(&pdev->dev, "cqhci-pltfm init: failed: %d\n", ret); + goto cleanup; + } + + msm_host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD; + cq_host->ops = &sdhci_msm_cqhci_ops; + + dma64 = host->flags & SDHCI_USE_64_BIT_DMA; + + ret = cqhci_init(cq_host, host->mmc, dma64); + if (ret) { + dev_err(&pdev->dev, "%s: CQE init: failed (%d)\n", + mmc_hostname(host->mmc), ret); + goto cleanup; + } + + /* Disable cqe reset due to cqe enable signal */ + cqcfg = cqhci_readl(cq_host, CQHCI_VENDOR_CFG1); + cqcfg |= CQHCI_VENDOR_DIS_RST_ON_CQ_EN; + cqhci_writel(cq_host, cqcfg, CQHCI_VENDOR_CFG1); + + /* + * SDHC expects 12byte ADMA descriptors till CQE is enabled. + * So limit desc_sz to 12 so that the data commands that are sent + * during card initialization (before CQE gets enabled) would + * get executed without any issues. + */ + if (host->flags & SDHCI_USE_64_BIT_DMA) + host->desc_sz = 12; + + ret = __sdhci_add_host(host); + if (ret) + goto cleanup; + + dev_info(&pdev->dev, "%s: CQE init: success\n", + mmc_hostname(host->mmc)); + return ret; + +cleanup: + sdhci_cleanup_host(host); + return ret; +} + /* * Platform specific register write functions. This is so that, if any * register write needs to be followed up by platform specific actions, @@ -1731,6 +1857,7 @@ static const struct sdhci_ops sdhci_msm_ops = { .set_uhs_signaling = sdhci_msm_set_uhs_signaling, .write_w = sdhci_msm_writew, .write_b = sdhci_msm_writeb, + .irq = sdhci_msm_cqe_irq, }; static const struct sdhci_pltfm_data sdhci_msm_pdata = { @@ -1746,7 +1873,6 @@ static int sdhci_msm_probe(struct platform_device *pdev) struct sdhci_host *host; struct sdhci_pltfm_host *pltfm_host; struct sdhci_msm_host *msm_host; - struct resource *core_memres; struct clk *clk; int ret; u16 host_version, core_minor; @@ -1754,6 +1880,7 @@ static int sdhci_msm_probe(struct platform_device *pdev) u8 core_major; const struct sdhci_msm_offset *msm_offset; const struct sdhci_msm_variant_info *var_info; + struct device_node *node = pdev->dev.of_node; host = sdhci_pltfm_init(pdev, &sdhci_msm_pdata, sizeof(*msm_host)); if (IS_ERR(host)) @@ -1847,10 +1974,7 @@ static int sdhci_msm_probe(struct platform_device *pdev) } if (!msm_host->mci_removed) { - core_memres = platform_get_resource(pdev, IORESOURCE_MEM, 1); - msm_host->core_mem = devm_ioremap_resource(&pdev->dev, - core_memres); - + msm_host->core_mem = devm_platform_ioremap_resource(pdev, 1); if (IS_ERR(msm_host->core_mem)) { ret = PTR_ERR(msm_host->core_mem); goto clk_disable; @@ -1952,7 +2076,10 @@ static int sdhci_msm_probe(struct platform_device *pdev) pm_runtime_use_autosuspend(&pdev->dev); host->mmc_host_ops.execute_tuning = sdhci_msm_execute_tuning; - ret = sdhci_add_host(host); + if (of_property_read_bool(node, "supports-cqe")) + ret = sdhci_msm_cqe_add_host(host, pdev); + else + ret = sdhci_add_host(host); if (ret) goto pm_runtime_disable; sdhci_msm_set_regulator_caps(msm_host); diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c index 5959e394b416..ab2bd314a390 100644 --- a/drivers/mmc/host/sdhci-of-at91.c +++ b/drivers/mmc/host/sdhci-of-at91.c @@ -33,7 +33,14 @@ #define SDHCI_AT91_PRESET_COMMON_CONF 0x400 /* drv type B, programmable clock mode */ +struct sdhci_at91_soc_data { + const struct sdhci_pltfm_data *pdata; + bool baseclk_is_generated_internally; + unsigned int divider_for_baseclk; +}; + struct sdhci_at91_priv { + const struct sdhci_at91_soc_data *soc_data; struct clk *hclock; struct clk *gck; struct clk *mainck; @@ -141,12 +148,24 @@ static const struct sdhci_ops sdhci_at91_sama5d2_ops = { .set_power = sdhci_at91_set_power, }; -static const struct sdhci_pltfm_data soc_data_sama5d2 = { +static const struct sdhci_pltfm_data sdhci_sama5d2_pdata = { .ops = &sdhci_at91_sama5d2_ops, }; +static const struct sdhci_at91_soc_data soc_data_sama5d2 = { + .pdata = &sdhci_sama5d2_pdata, + .baseclk_is_generated_internally = false, +}; + +static const struct sdhci_at91_soc_data soc_data_sam9x60 = { + .pdata = &sdhci_sama5d2_pdata, + .baseclk_is_generated_internally = true, + .divider_for_baseclk = 2, +}; + static const struct of_device_id sdhci_at91_dt_match[] = { { .compatible = "atmel,sama5d2-sdhci", .data = &soc_data_sama5d2 }, + { .compatible = "microchip,sam9x60-sdhci", .data = &soc_data_sam9x60 }, {} }; MODULE_DEVICE_TABLE(of, sdhci_at91_dt_match); @@ -156,50 +175,37 @@ static int sdhci_at91_set_clks_presets(struct device *dev) struct sdhci_host *host = dev_get_drvdata(dev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host); - int ret; unsigned int caps0, caps1; unsigned int clk_base, clk_mul; - unsigned int gck_rate, real_gck_rate; + unsigned int gck_rate, clk_base_rate; unsigned int preset_div; - /* - * The mult clock is provided by as a generated clock by the PMC - * controller. In order to set the rate of gck, we have to get the - * base clock rate and the clock mult from capabilities. - */ clk_prepare_enable(priv->hclock); caps0 = readl(host->ioaddr + SDHCI_CAPABILITIES); caps1 = readl(host->ioaddr + SDHCI_CAPABILITIES_1); - clk_base = (caps0 & SDHCI_CLOCK_V3_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; - clk_mul = (caps1 & SDHCI_CLOCK_MUL_MASK) >> SDHCI_CLOCK_MUL_SHIFT; - gck_rate = clk_base * 1000000 * (clk_mul + 1); - ret = clk_set_rate(priv->gck, gck_rate); - if (ret < 0) { - dev_err(dev, "failed to set gck"); - clk_disable_unprepare(priv->hclock); - return ret; - } - /* - * We need to check if we have the requested rate for gck because in - * some cases this rate could be not supported. If it happens, the rate - * is the closest one gck can provide. We have to update the value - * of clk mul. - */ - real_gck_rate = clk_get_rate(priv->gck); - if (real_gck_rate != gck_rate) { - clk_mul = real_gck_rate / (clk_base * 1000000) - 1; - caps1 &= (~SDHCI_CLOCK_MUL_MASK); - caps1 |= ((clk_mul << SDHCI_CLOCK_MUL_SHIFT) & - SDHCI_CLOCK_MUL_MASK); - /* Set capabilities in r/w mode. */ - writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, - host->ioaddr + SDMMC_CACR); - writel(caps1, host->ioaddr + SDHCI_CAPABILITIES_1); - /* Set capabilities in ro mode. */ - writel(0, host->ioaddr + SDMMC_CACR); - dev_info(dev, "update clk mul to %u as gck rate is %u Hz\n", - clk_mul, real_gck_rate); - } + + gck_rate = clk_get_rate(priv->gck); + if (priv->soc_data->baseclk_is_generated_internally) + clk_base_rate = gck_rate / priv->soc_data->divider_for_baseclk; + else + clk_base_rate = clk_get_rate(priv->mainck); + + clk_base = clk_base_rate / 1000000; + clk_mul = gck_rate / clk_base_rate - 1; + + caps0 &= ~SDHCI_CLOCK_V3_BASE_MASK; + caps0 |= (clk_base << SDHCI_CLOCK_BASE_SHIFT) & SDHCI_CLOCK_V3_BASE_MASK; + caps1 &= ~SDHCI_CLOCK_MUL_MASK; + caps1 |= (clk_mul << SDHCI_CLOCK_MUL_SHIFT) & SDHCI_CLOCK_MUL_MASK; + /* Set capabilities in r/w mode. */ + writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, host->ioaddr + SDMMC_CACR); + writel(caps0, host->ioaddr + SDHCI_CAPABILITIES); + writel(caps1, host->ioaddr + SDHCI_CAPABILITIES_1); + /* Set capabilities in ro mode. */ + writel(0, host->ioaddr + SDMMC_CACR); + + dev_info(dev, "update clk mul to %u as gck rate is %u Hz and clk base is %u Hz\n", + clk_mul, gck_rate, clk_base_rate); /* * We have to set preset values because it depends on the clk_mul @@ -207,19 +213,19 @@ static int sdhci_at91_set_clks_presets(struct device *dev) * maximum sd clock value is 120 MHz instead of 208 MHz. For that * reason, we need to use presets to support SDR104. */ - preset_div = DIV_ROUND_UP(real_gck_rate, 24000000) - 1; + preset_div = DIV_ROUND_UP(gck_rate, 24000000) - 1; writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, host->ioaddr + SDHCI_PRESET_FOR_SDR12); - preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1; + preset_div = DIV_ROUND_UP(gck_rate, 50000000) - 1; writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, host->ioaddr + SDHCI_PRESET_FOR_SDR25); - preset_div = DIV_ROUND_UP(real_gck_rate, 100000000) - 1; + preset_div = DIV_ROUND_UP(gck_rate, 100000000) - 1; writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, host->ioaddr + SDHCI_PRESET_FOR_SDR50); - preset_div = DIV_ROUND_UP(real_gck_rate, 120000000) - 1; + preset_div = DIV_ROUND_UP(gck_rate, 120000000) - 1; writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, host->ioaddr + SDHCI_PRESET_FOR_SDR104); - preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1; + preset_div = DIV_ROUND_UP(gck_rate, 50000000) - 1; writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, host->ioaddr + SDHCI_PRESET_FOR_DDR50); @@ -314,7 +320,7 @@ static const struct dev_pm_ops sdhci_at91_dev_pm_ops = { static int sdhci_at91_probe(struct platform_device *pdev) { const struct of_device_id *match; - const struct sdhci_pltfm_data *soc_data; + const struct sdhci_at91_soc_data *soc_data; struct sdhci_host *host; struct sdhci_pltfm_host *pltfm_host; struct sdhci_at91_priv *priv; @@ -325,29 +331,37 @@ static int sdhci_at91_probe(struct platform_device *pdev) return -EINVAL; soc_data = match->data; - host = sdhci_pltfm_init(pdev, soc_data, sizeof(*priv)); + host = sdhci_pltfm_init(pdev, soc_data->pdata, sizeof(*priv)); if (IS_ERR(host)) return PTR_ERR(host); pltfm_host = sdhci_priv(host); priv = sdhci_pltfm_priv(pltfm_host); + priv->soc_data = soc_data; priv->mainck = devm_clk_get(&pdev->dev, "baseclk"); if (IS_ERR(priv->mainck)) { - dev_err(&pdev->dev, "failed to get baseclk\n"); - return PTR_ERR(priv->mainck); + if (soc_data->baseclk_is_generated_internally) { + priv->mainck = NULL; + } else { + dev_err(&pdev->dev, "failed to get baseclk\n"); + ret = PTR_ERR(priv->mainck); + goto sdhci_pltfm_free; + } } priv->hclock = devm_clk_get(&pdev->dev, "hclock"); if (IS_ERR(priv->hclock)) { dev_err(&pdev->dev, "failed to get hclock\n"); - return PTR_ERR(priv->hclock); + ret = PTR_ERR(priv->hclock); + goto sdhci_pltfm_free; } priv->gck = devm_clk_get(&pdev->dev, "multclk"); if (IS_ERR(priv->gck)) { dev_err(&pdev->dev, "failed to get multclk\n"); - return PTR_ERR(priv->gck); + ret = PTR_ERR(priv->gck); + goto sdhci_pltfm_free; } ret = sdhci_at91_set_clks_presets(&pdev->dev); diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index 500f70a6ee42..5d8dd870bd44 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -173,6 +173,9 @@ static u16 esdhc_readw_fixup(struct sdhci_host *host, u16 ret; int shift = (spec_reg & 0x2) * 8; + if (spec_reg == SDHCI_TRANSFER_MODE) + return pltfm_host->xfer_mode_shadow; + if (spec_reg == SDHCI_HOST_VERSION) ret = value & 0xffff; else @@ -562,32 +565,46 @@ static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host) static void esdhc_clock_enable(struct sdhci_host *host, bool enable) { - u32 val; + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); ktime_t timeout; + u32 val, clk_en; + + clk_en = ESDHC_CLOCK_SDCLKEN; + + /* + * IPGEN/HCKEN/PEREN bits exist on eSDHC whose vendor version + * is 2.2 or lower. + */ + if (esdhc->vendor_ver <= VENDOR_V_22) + clk_en |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | + ESDHC_CLOCK_PEREN); val = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); if (enable) - val |= ESDHC_CLOCK_SDCLKEN; + val |= clk_en; else - val &= ~ESDHC_CLOCK_SDCLKEN; + val &= ~clk_en; sdhci_writel(host, val, ESDHC_SYSTEM_CONTROL); - /* Wait max 20 ms */ + /* + * Wait max 20 ms. If vendor version is 2.2 or lower, do not + * wait clock stable bit which does not exist. + */ timeout = ktime_add_ms(ktime_get(), 20); - val = ESDHC_CLOCK_STABLE; - while (1) { + while (esdhc->vendor_ver > VENDOR_V_22) { bool timedout = ktime_after(ktime_get(), timeout); - if (sdhci_readl(host, ESDHC_PRSSTAT) & val) + if (sdhci_readl(host, ESDHC_PRSSTAT) & ESDHC_CLOCK_STABLE) break; if (timedout) { pr_err("%s: Internal clock never stabilised.\n", mmc_hostname(host->mmc)); break; } - udelay(10); + usleep_range(10, 20); } } @@ -621,77 +638,97 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); - int pre_div = 1; - int div = 1; - int division; + unsigned int pre_div = 1, div = 1; + unsigned int clock_fixup = 0; ktime_t timeout; - long fixup = 0; u32 temp; - host->mmc->actual_clock = 0; - if (clock == 0) { + host->mmc->actual_clock = 0; esdhc_clock_enable(host, false); return; } - /* Workaround to start pre_div at 2 for VNN < VENDOR_V_23 */ + /* Start pre_div at 2 for vendor version < 2.3. */ if (esdhc->vendor_ver < VENDOR_V_23) pre_div = 2; + /* Fix clock value. */ if (host->mmc->card && mmc_card_sd(host->mmc->card) && - esdhc->clk_fixup && host->mmc->ios.timing == MMC_TIMING_LEGACY) - fixup = esdhc->clk_fixup->sd_dflt_max_clk; + esdhc->clk_fixup && host->mmc->ios.timing == MMC_TIMING_LEGACY) + clock_fixup = esdhc->clk_fixup->sd_dflt_max_clk; else if (esdhc->clk_fixup) - fixup = esdhc->clk_fixup->max_clk[host->mmc->ios.timing]; - - if (fixup && clock > fixup) - clock = fixup; + clock_fixup = esdhc->clk_fixup->max_clk[host->mmc->ios.timing]; - temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); - temp &= ~(ESDHC_CLOCK_SDCLKEN | ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | - ESDHC_CLOCK_PEREN | ESDHC_CLOCK_MASK); - sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); + if (clock_fixup == 0 || clock < clock_fixup) + clock_fixup = clock; - while (host->max_clk / pre_div / 16 > clock && pre_div < 256) + /* Calculate pre_div and div. */ + while (host->max_clk / pre_div / 16 > clock_fixup && pre_div < 256) pre_div *= 2; - while (host->max_clk / pre_div / div > clock && div < 16) + while (host->max_clk / pre_div / div > clock_fixup && div < 16) div++; + esdhc->div_ratio = pre_div * div; + + /* Limit clock division for HS400 200MHz clock for quirk. */ if (esdhc->quirk_limited_clk_division && clock == MMC_HS200_MAX_DTR && (host->mmc->ios.timing == MMC_TIMING_MMC_HS400 || host->flags & SDHCI_HS400_TUNING)) { - division = pre_div * div; - if (division <= 4) { + if (esdhc->div_ratio <= 4) { pre_div = 4; div = 1; - } else if (division <= 8) { + } else if (esdhc->div_ratio <= 8) { pre_div = 4; div = 2; - } else if (division <= 12) { + } else if (esdhc->div_ratio <= 12) { pre_div = 4; div = 3; } else { pr_warn("%s: using unsupported clock division.\n", mmc_hostname(host->mmc)); } + esdhc->div_ratio = pre_div * div; } + host->mmc->actual_clock = host->max_clk / esdhc->div_ratio; + dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n", - clock, host->max_clk / pre_div / div); - host->mmc->actual_clock = host->max_clk / pre_div / div; - esdhc->div_ratio = pre_div * div; + clock, host->mmc->actual_clock); + + /* Set clock division into register. */ pre_div >>= 1; div--; + esdhc_clock_enable(host, false); + temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); - temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN - | (div << ESDHC_DIVIDER_SHIFT) - | (pre_div << ESDHC_PREDIV_SHIFT)); + temp &= ~ESDHC_CLOCK_MASK; + temp |= ((div << ESDHC_DIVIDER_SHIFT) | + (pre_div << ESDHC_PREDIV_SHIFT)); sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); + /* + * Wait max 20 ms. If vendor version is 2.2 or lower, do not + * wait clock stable bit which does not exist. + */ + timeout = ktime_add_ms(ktime_get(), 20); + while (esdhc->vendor_ver > VENDOR_V_22) { + bool timedout = ktime_after(ktime_get(), timeout); + + if (sdhci_readl(host, ESDHC_PRSSTAT) & ESDHC_CLOCK_STABLE) + break; + if (timedout) { + pr_err("%s: Internal clock never stabilised.\n", + mmc_hostname(host->mmc)); + break; + } + usleep_range(10, 20); + } + + /* Additional setting for HS400. */ if (host->mmc->ios.timing == MMC_TIMING_MMC_HS400 && clock == MMC_HS200_MAX_DTR) { temp = sdhci_readl(host, ESDHC_TBCTL); @@ -711,25 +748,7 @@ static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock) esdhc_clock_enable(host, false); esdhc_flush_async_fifo(host); } - - /* Wait max 20 ms */ - timeout = ktime_add_ms(ktime_get(), 20); - while (1) { - bool timedout = ktime_after(ktime_get(), timeout); - - if (sdhci_readl(host, ESDHC_PRSSTAT) & ESDHC_CLOCK_STABLE) - break; - if (timedout) { - pr_err("%s: Internal clock never stabilised.\n", - mmc_hostname(host->mmc)); - return; - } - udelay(10); - } - - temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL); - temp |= ESDHC_CLOCK_SDCLKEN; - sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL); + esdhc_clock_enable(host, true); } static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width) @@ -758,23 +777,58 @@ static void esdhc_reset(struct sdhci_host *host, u8 mask) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); - u32 val; + u32 val, bus_width = 0; + /* + * Add delay to make sure all the DMA transfers are finished + * for quirk. + */ if (esdhc->quirk_delay_before_data_reset && (mask & SDHCI_RESET_DATA) && (host->flags & SDHCI_REQ_USE_DMA)) mdelay(5); + /* + * Save bus-width for eSDHC whose vendor version is 2.2 + * or lower for data reset. + */ + if ((mask & SDHCI_RESET_DATA) && + (esdhc->vendor_ver <= VENDOR_V_22)) { + val = sdhci_readl(host, ESDHC_PROCTL); + bus_width = val & ESDHC_CTRL_BUSWIDTH_MASK; + } + sdhci_reset(host, mask); - sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); - sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + /* + * Restore bus-width setting and interrupt registers for eSDHC + * whose vendor version is 2.2 or lower for data reset. + */ + if ((mask & SDHCI_RESET_DATA) && + (esdhc->vendor_ver <= VENDOR_V_22)) { + val = sdhci_readl(host, ESDHC_PROCTL); + val &= ~ESDHC_CTRL_BUSWIDTH_MASK; + val |= bus_width; + sdhci_writel(host, val, ESDHC_PROCTL); - if (mask & SDHCI_RESET_ALL) { + sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); + sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); + } + + /* + * Some bits have to be cleaned manually for eSDHC whose spec + * version is higher than 3.0 for all reset. + */ + if ((mask & SDHCI_RESET_ALL) && + (esdhc->spec_ver >= SDHCI_SPEC_300)) { val = sdhci_readl(host, ESDHC_TBCTL); val &= ~ESDHC_TB_EN; sdhci_writel(host, val, ESDHC_TBCTL); + /* + * Initialize eSDHC_DLLCFG1[DLL_PD_PULSE_STRETCH_SEL] to + * 0 for quirk. + */ if (esdhc->quirk_unreliable_pulse_detection) { val = sdhci_readl(host, ESDHC_DLLCFG1); val &= ~ESDHC_DLL_PD_PULSE_STRETCH_SEL; @@ -854,20 +908,20 @@ static int esdhc_signal_voltage_switch(struct mmc_host *mmc, } static struct soc_device_attribute soc_tuning_erratum_type1[] = { - { .family = "QorIQ T1023", .revision = "1.0", }, - { .family = "QorIQ T1040", .revision = "1.0", }, - { .family = "QorIQ T2080", .revision = "1.0", }, - { .family = "QorIQ LS1021A", .revision = "1.0", }, + { .family = "QorIQ T1023", }, + { .family = "QorIQ T1040", }, + { .family = "QorIQ T2080", }, + { .family = "QorIQ LS1021A", }, { }, }; static struct soc_device_attribute soc_tuning_erratum_type2[] = { - { .family = "QorIQ LS1012A", .revision = "1.0", }, - { .family = "QorIQ LS1043A", .revision = "1.*", }, - { .family = "QorIQ LS1046A", .revision = "1.0", }, - { .family = "QorIQ LS1080A", .revision = "1.0", }, - { .family = "QorIQ LS2080A", .revision = "1.0", }, - { .family = "QorIQ LA1575A", .revision = "1.0", }, + { .family = "QorIQ LS1012A", }, + { .family = "QorIQ LS1043A", }, + { .family = "QorIQ LS1046A", }, + { .family = "QorIQ LS1080A", }, + { .family = "QorIQ LS2080A", }, + { .family = "QorIQ LA1575A", }, { }, }; @@ -888,20 +942,11 @@ static void esdhc_tuning_block_enable(struct sdhci_host *host, bool enable) esdhc_clock_enable(host, true); } -static void esdhc_prepare_sw_tuning(struct sdhci_host *host, u8 *window_start, +static void esdhc_tuning_window_ptr(struct sdhci_host *host, u8 *window_start, u8 *window_end) { - struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); - struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); - u8 tbstat_15_8, tbstat_7_0; u32 val; - if (esdhc->quirk_tuning_erratum_type1) { - *window_start = 5 * esdhc->div_ratio; - *window_end = 3 * esdhc->div_ratio; - return; - } - /* Write TBCTL[11:8]=4'h8 */ val = sdhci_readl(host, ESDHC_TBCTL); val &= ~(0xf << 8); @@ -920,20 +965,37 @@ static void esdhc_prepare_sw_tuning(struct sdhci_host *host, u8 *window_start, val = sdhci_readl(host, ESDHC_TBSTAT); val = sdhci_readl(host, ESDHC_TBSTAT); + *window_end = val & 0xff; + *window_start = (val >> 8) & 0xff; +} + +static void esdhc_prepare_sw_tuning(struct sdhci_host *host, u8 *window_start, + u8 *window_end) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_esdhc *esdhc = sdhci_pltfm_priv(pltfm_host); + u8 start_ptr, end_ptr; + + if (esdhc->quirk_tuning_erratum_type1) { + *window_start = 5 * esdhc->div_ratio; + *window_end = 3 * esdhc->div_ratio; + return; + } + + esdhc_tuning_window_ptr(host, &start_ptr, &end_ptr); + /* Reset data lines by setting ESDHCCTL[RSTD] */ sdhci_reset(host, SDHCI_RESET_DATA); /* Write 32'hFFFF_FFFF to IRQSTAT register */ sdhci_writel(host, 0xFFFFFFFF, SDHCI_INT_STATUS); - /* If TBSTAT[15:8]-TBSTAT[7:0] > 4 * div_ratio - * or TBSTAT[7:0]-TBSTAT[15:8] > 4 * div_ratio, + /* If TBSTAT[15:8]-TBSTAT[7:0] > (4 * div_ratio) + 2 + * or TBSTAT[7:0]-TBSTAT[15:8] > (4 * div_ratio) + 2, * then program TBPTR[TB_WNDW_END_PTR] = 4 * div_ratio * and program TBPTR[TB_WNDW_START_PTR] = 8 * div_ratio. */ - tbstat_7_0 = val & 0xff; - tbstat_15_8 = (val >> 8) & 0xff; - if (abs(tbstat_15_8 - tbstat_7_0) > (4 * esdhc->div_ratio)) { + if (abs(start_ptr - end_ptr) > (4 * esdhc->div_ratio + 2)) { *window_start = 8 * esdhc->div_ratio; *window_end = 4 * esdhc->div_ratio; } else { @@ -1006,6 +1068,19 @@ static int esdhc_execute_tuning(struct mmc_host *mmc, u32 opcode) if (ret) break; + /* For type2 affected platforms of the tuning erratum, + * tuning may succeed although eSDHC might not have + * tuned properly. Need to check tuning window. + */ + if (esdhc->quirk_tuning_erratum_type2 && + !host->tuning_err) { + esdhc_tuning_window_ptr(host, &window_start, + &window_end); + if (abs(window_start - window_end) > + (4 * esdhc->div_ratio + 2)) + host->tuning_err = -EAGAIN; + } + /* If HW tuning fails and triggers erratum, * try workaround. */ @@ -1238,7 +1313,8 @@ static void esdhc_init(struct platform_device *pdev, struct sdhci_host *host) * 1/2 peripheral clock. */ if (of_device_is_compatible(np, "fsl,ls1046a-esdhc") || - of_device_is_compatible(np, "fsl,ls1028a-esdhc")) + of_device_is_compatible(np, "fsl,ls1028a-esdhc") || + of_device_is_compatible(np, "fsl,ls1088a-esdhc")) esdhc->peripheral_clock = clk_get_rate(clk) / 2; else esdhc->peripheral_clock = clk_get_rate(clk); diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c index 083e7e053c95..882053151a47 100644 --- a/drivers/mmc/host/sdhci-omap.c +++ b/drivers/mmc/host/sdhci-omap.c @@ -7,6 +7,7 @@ */ #include <linux/delay.h> +#include <linux/mmc/mmc.h> #include <linux/mmc/slot-gpio.h> #include <linux/module.h> #include <linux/of.h> @@ -85,6 +86,7 @@ /* sdhci-omap controller flags */ #define SDHCI_OMAP_REQUIRE_IODELAY BIT(0) +#define SDHCI_OMAP_SPECIAL_RESET BIT(1) struct sdhci_omap_data { u32 offset; @@ -685,7 +687,11 @@ static int sdhci_omap_enable_dma(struct sdhci_host *host) struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host); reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON); - reg |= CON_DMA_MASTER; + reg &= ~CON_DMA_MASTER; + /* Switch to DMA slave mode when using external DMA */ + if (!host->use_external_dma) + reg |= CON_DMA_MASTER; + sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, reg); return 0; @@ -774,15 +780,35 @@ static void sdhci_omap_set_uhs_signaling(struct sdhci_host *host, sdhci_omap_start_clock(omap_host); } +#define MMC_TIMEOUT_US 20000 /* 20000 micro Sec */ static void sdhci_omap_reset(struct sdhci_host *host, u8 mask) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host); + unsigned long limit = MMC_TIMEOUT_US; + unsigned long i = 0; /* Don't reset data lines during tuning operation */ if (omap_host->is_tuning) mask &= ~SDHCI_RESET_DATA; + if (omap_host->flags & SDHCI_OMAP_SPECIAL_RESET) { + sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET); + while ((!(sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask)) && + (i++ < limit)) + udelay(1); + i = 0; + while ((sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) && + (i++ < limit)) + udelay(1); + + if (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) + dev_err(mmc_dev(host->mmc), + "Timeout waiting on controller reset in %s\n", + __func__); + return; + } + sdhci_reset(host, mask); } @@ -823,6 +849,15 @@ static u32 sdhci_omap_irq(struct sdhci_host *host, u32 intmask) return intmask; } +static void sdhci_omap_set_timeout(struct sdhci_host *host, + struct mmc_command *cmd) +{ + if (cmd->opcode == MMC_ERASE) + sdhci_set_data_timeout_irq(host, false); + + __sdhci_set_timeout(host, cmd); +} + static struct sdhci_ops sdhci_omap_ops = { .set_clock = sdhci_omap_set_clock, .set_power = sdhci_omap_set_power, @@ -834,6 +869,7 @@ static struct sdhci_ops sdhci_omap_ops = { .reset = sdhci_omap_reset, .set_uhs_signaling = sdhci_omap_set_uhs_signaling, .irq = sdhci_omap_irq, + .set_timeout = sdhci_omap_set_timeout, }; static int sdhci_omap_set_capabilities(struct sdhci_omap_host *omap_host) @@ -883,6 +919,16 @@ static const struct sdhci_omap_data k2g_data = { .offset = 0x200, }; +static const struct sdhci_omap_data am335_data = { + .offset = 0x200, + .flags = SDHCI_OMAP_SPECIAL_RESET, +}; + +static const struct sdhci_omap_data am437_data = { + .offset = 0x200, + .flags = SDHCI_OMAP_SPECIAL_RESET, +}; + static const struct sdhci_omap_data dra7_data = { .offset = 0x200, .flags = SDHCI_OMAP_REQUIRE_IODELAY, @@ -891,6 +937,8 @@ static const struct sdhci_omap_data dra7_data = { static const struct of_device_id omap_sdhci_match[] = { { .compatible = "ti,dra7-sdhci", .data = &dra7_data }, { .compatible = "ti,k2g-sdhci", .data = &k2g_data }, + { .compatible = "ti,am335-sdhci", .data = &am335_data }, + { .compatible = "ti,am437-sdhci", .data = &am437_data }, {}, }; MODULE_DEVICE_TABLE(of, omap_sdhci_match); @@ -1037,6 +1085,7 @@ static int sdhci_omap_probe(struct platform_device *pdev) const struct of_device_id *match; struct sdhci_omap_data *data; const struct soc_device_attribute *soc; + struct resource *regs; match = of_match_device(omap_sdhci_match, dev); if (!match) @@ -1049,6 +1098,10 @@ static int sdhci_omap_probe(struct platform_device *pdev) } offset = data->offset; + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) + return -ENXIO; + host = sdhci_pltfm_init(pdev, &sdhci_omap_pdata, sizeof(*omap_host)); if (IS_ERR(host)) { @@ -1065,6 +1118,7 @@ static int sdhci_omap_probe(struct platform_device *pdev) omap_host->timing = MMC_TIMING_LEGACY; omap_host->flags = data->flags; host->ioaddr += offset; + host->mapbase = regs->start + offset; mmc = host->mmc; sdhci_get_of_property(pdev); @@ -1134,6 +1188,10 @@ static int sdhci_omap_probe(struct platform_device *pdev) host->mmc_host_ops.execute_tuning = sdhci_omap_execute_tuning; host->mmc_host_ops.enable_sdio_irq = sdhci_omap_enable_sdio_irq; + /* Switch to external DMA only if there is the "dmas" property */ + if (of_find_property(dev->of_node, "dmas", NULL)) + sdhci_switch_external_dma(host, true); + ret = sdhci_setup_host(host); if (ret) goto err_put_sync; diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index 5091e2c1c0e5..525de2454a4d 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -1991,12 +1991,12 @@ static struct sdhci_pci_slot *sdhci_pci_probe_slot( if (slot->cd_idx >= 0) { ret = mmc_gpiod_request_cd(host->mmc, "cd", slot->cd_idx, - slot->cd_override_level, 0, NULL); + slot->cd_override_level, 0); if (ret && ret != -EPROBE_DEFER) ret = mmc_gpiod_request_cd(host->mmc, NULL, slot->cd_idx, slot->cd_override_level, - 0, NULL); + 0); if (ret == -EPROBE_DEFER) goto remove; diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index 51e096f27388..64200c78e90d 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -117,7 +117,6 @@ struct sdhci_s3c { struct s3c_sdhci_platdata *pdata; int cur_clk; int ext_cd_irq; - int ext_cd_gpio; struct clk *clk_io; struct clk *clk_bus[MAX_BUS_CLK]; @@ -481,7 +480,6 @@ static int sdhci_s3c_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct sdhci_host *host; struct sdhci_s3c *sc; - struct resource *res; int ret, irq, ptr, clks; if (!pdev->dev.platform_data && !pdev->dev.of_node) { @@ -512,7 +510,6 @@ static int sdhci_s3c_probe(struct platform_device *pdev) goto err_pdata_io_clk; } else { memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata)); - sc->ext_cd_gpio = -1; /* invalid gpio number */ } drv_data = sdhci_s3c_get_driver_data(pdev); @@ -555,8 +552,7 @@ static int sdhci_s3c_probe(struct platform_device *pdev) goto err_no_busclks; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - host->ioaddr = devm_ioremap_resource(&pdev->dev, res); + host->ioaddr = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(host->ioaddr)) { ret = PTR_ERR(host->ioaddr); goto err_req_regs; diff --git a/drivers/mmc/host/sdhci-sirf.c b/drivers/mmc/host/sdhci-sirf.c index e43143223320..f4b05dd6c20a 100644 --- a/drivers/mmc/host/sdhci-sirf.c +++ b/drivers/mmc/host/sdhci-sirf.c @@ -194,7 +194,7 @@ static int sdhci_sirf_probe(struct platform_device *pdev) * We must request the IRQ after sdhci_add_host(), as the tasklet only * gets setup in sdhci_add_host() and we oops. */ - ret = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0, NULL); + ret = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0); if (ret == -EPROBE_DEFER) goto err_request_cd; if (!ret) diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c index 916b5b09c3d1..b4b63089a4e2 100644 --- a/drivers/mmc/host/sdhci-spear.c +++ b/drivers/mmc/host/sdhci-spear.c @@ -43,7 +43,6 @@ static const struct sdhci_ops sdhci_pltfm_ops = { static int sdhci_probe(struct platform_device *pdev) { struct sdhci_host *host; - struct resource *iomem; struct spear_sdhci *sdhci; struct device *dev; int ret; @@ -56,8 +55,7 @@ static int sdhci_probe(struct platform_device *pdev) goto err; } - iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - host->ioaddr = devm_ioremap_resource(&pdev->dev, iomem); + host->ioaddr = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(host->ioaddr)) { ret = PTR_ERR(host->ioaddr); dev_dbg(&pdev->dev, "unable to map iomem: %d\n", ret); @@ -98,7 +96,7 @@ static int sdhci_probe(struct platform_device *pdev) * It is optional to use GPIOs for sdhci card detection. If we * find a descriptor using slot GPIO, we use it. */ - ret = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0, NULL); + ret = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0); if (ret == -EPROBE_DEFER) goto disable_clk; diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 659a9459ace3..63db84481dff 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -10,6 +10,7 @@ */ #include <linux/delay.h> +#include <linux/dmaengine.h> #include <linux/ktime.h> #include <linux/highmem.h> #include <linux/io.h> @@ -992,7 +993,7 @@ static void sdhci_set_transfer_irqs(struct sdhci_host *host) sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); } -static void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable) +void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable) { if (enable) host->ier |= SDHCI_INT_DATA_TIMEOUT; @@ -1001,42 +1002,36 @@ static void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable) sdhci_writel(host, host->ier, SDHCI_INT_ENABLE); sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE); } +EXPORT_SYMBOL_GPL(sdhci_set_data_timeout_irq); -static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) +void __sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) { - u8 count; - - if (host->ops->set_timeout) { - host->ops->set_timeout(host, cmd); - } else { - bool too_big = false; - - count = sdhci_calc_timeout(host, cmd, &too_big); - - if (too_big && - host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT) { - sdhci_calc_sw_timeout(host, cmd); - sdhci_set_data_timeout_irq(host, false); - } else if (!(host->ier & SDHCI_INT_DATA_TIMEOUT)) { - sdhci_set_data_timeout_irq(host, true); - } - - sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL); + bool too_big = false; + u8 count = sdhci_calc_timeout(host, cmd, &too_big); + + if (too_big && + host->quirks2 & SDHCI_QUIRK2_DISABLE_HW_TIMEOUT) { + sdhci_calc_sw_timeout(host, cmd); + sdhci_set_data_timeout_irq(host, false); + } else if (!(host->ier & SDHCI_INT_DATA_TIMEOUT)) { + sdhci_set_data_timeout_irq(host, true); } + + sdhci_writeb(host, count, SDHCI_TIMEOUT_CONTROL); } +EXPORT_SYMBOL_GPL(__sdhci_set_timeout); -static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) +static void sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd) { - struct mmc_data *data = cmd->data; - - host->data_timeout = 0; - - if (sdhci_data_line_cmd(cmd)) - sdhci_set_timeout(host, cmd); - - if (!data) - return; + if (host->ops->set_timeout) + host->ops->set_timeout(host, cmd); + else + __sdhci_set_timeout(host, cmd); +} +static void sdhci_initialize_data(struct sdhci_host *host, + struct mmc_data *data) +{ WARN_ON(host->data); /* Sanity checks */ @@ -1047,6 +1042,34 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) host->data = data; host->data_early = 0; host->data->bytes_xfered = 0; +} + +static inline void sdhci_set_block_info(struct sdhci_host *host, + struct mmc_data *data) +{ + /* Set the DMA boundary value and block size */ + sdhci_writew(host, + SDHCI_MAKE_BLKSZ(host->sdma_boundary, data->blksz), + SDHCI_BLOCK_SIZE); + /* + * For Version 4.10 onwards, if v4 mode is enabled, 32-bit Block Count + * can be supported, in that case 16-bit block count register must be 0. + */ + if (host->version >= SDHCI_SPEC_410 && host->v4_mode && + (host->quirks2 & SDHCI_QUIRK2_USE_32BIT_BLK_CNT)) { + if (sdhci_readw(host, SDHCI_BLOCK_COUNT)) + sdhci_writew(host, 0, SDHCI_BLOCK_COUNT); + sdhci_writew(host, data->blocks, SDHCI_32BIT_BLK_CNT); + } else { + sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT); + } +} + +static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) +{ + struct mmc_data *data = cmd->data; + + sdhci_initialize_data(host, data); if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { struct scatterlist *sg; @@ -1133,24 +1156,192 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) sdhci_set_transfer_irqs(host); - /* Set the DMA boundary value and block size */ - sdhci_writew(host, SDHCI_MAKE_BLKSZ(host->sdma_boundary, data->blksz), - SDHCI_BLOCK_SIZE); + sdhci_set_block_info(host, data); +} - /* - * For Version 4.10 onwards, if v4 mode is enabled, 32-bit Block Count - * can be supported, in that case 16-bit block count register must be 0. - */ - if (host->version >= SDHCI_SPEC_410 && host->v4_mode && - (host->quirks2 & SDHCI_QUIRK2_USE_32BIT_BLK_CNT)) { - if (sdhci_readw(host, SDHCI_BLOCK_COUNT)) - sdhci_writew(host, 0, SDHCI_BLOCK_COUNT); - sdhci_writew(host, data->blocks, SDHCI_32BIT_BLK_CNT); +#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA) + +static int sdhci_external_dma_init(struct sdhci_host *host) +{ + int ret = 0; + struct mmc_host *mmc = host->mmc; + + host->tx_chan = dma_request_chan(mmc->parent, "tx"); + if (IS_ERR(host->tx_chan)) { + ret = PTR_ERR(host->tx_chan); + if (ret != -EPROBE_DEFER) + pr_warn("Failed to request TX DMA channel.\n"); + host->tx_chan = NULL; + return ret; + } + + host->rx_chan = dma_request_chan(mmc->parent, "rx"); + if (IS_ERR(host->rx_chan)) { + if (host->tx_chan) { + dma_release_channel(host->tx_chan); + host->tx_chan = NULL; + } + + ret = PTR_ERR(host->rx_chan); + if (ret != -EPROBE_DEFER) + pr_warn("Failed to request RX DMA channel.\n"); + host->rx_chan = NULL; + } + + return ret; +} + +static struct dma_chan *sdhci_external_dma_channel(struct sdhci_host *host, + struct mmc_data *data) +{ + return data->flags & MMC_DATA_WRITE ? host->tx_chan : host->rx_chan; +} + +static int sdhci_external_dma_setup(struct sdhci_host *host, + struct mmc_command *cmd) +{ + int ret, i; + enum dma_transfer_direction dir; + struct dma_async_tx_descriptor *desc; + struct mmc_data *data = cmd->data; + struct dma_chan *chan; + struct dma_slave_config cfg; + dma_cookie_t cookie; + int sg_cnt; + + if (!host->mapbase) + return -EINVAL; + + cfg.src_addr = host->mapbase + SDHCI_BUFFER; + cfg.dst_addr = host->mapbase + SDHCI_BUFFER; + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + cfg.src_maxburst = data->blksz / 4; + cfg.dst_maxburst = data->blksz / 4; + + /* Sanity check: all the SG entries must be aligned by block size. */ + for (i = 0; i < data->sg_len; i++) { + if ((data->sg + i)->length % data->blksz) + return -EINVAL; + } + + chan = sdhci_external_dma_channel(host, data); + + ret = dmaengine_slave_config(chan, &cfg); + if (ret) + return ret; + + sg_cnt = sdhci_pre_dma_transfer(host, data, COOKIE_MAPPED); + if (sg_cnt <= 0) + return -EINVAL; + + dir = data->flags & MMC_DATA_WRITE ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM; + desc = dmaengine_prep_slave_sg(chan, data->sg, data->sg_len, dir, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!desc) + return -EINVAL; + + desc->callback = NULL; + desc->callback_param = NULL; + + cookie = dmaengine_submit(desc); + if (dma_submit_error(cookie)) + ret = cookie; + + return ret; +} + +static void sdhci_external_dma_release(struct sdhci_host *host) +{ + if (host->tx_chan) { + dma_release_channel(host->tx_chan); + host->tx_chan = NULL; + } + + if (host->rx_chan) { + dma_release_channel(host->rx_chan); + host->rx_chan = NULL; + } + + sdhci_switch_external_dma(host, false); +} + +static void __sdhci_external_dma_prepare_data(struct sdhci_host *host, + struct mmc_command *cmd) +{ + struct mmc_data *data = cmd->data; + + sdhci_initialize_data(host, data); + + host->flags |= SDHCI_REQ_USE_DMA; + sdhci_set_transfer_irqs(host); + + sdhci_set_block_info(host, data); +} + +static void sdhci_external_dma_prepare_data(struct sdhci_host *host, + struct mmc_command *cmd) +{ + if (!sdhci_external_dma_setup(host, cmd)) { + __sdhci_external_dma_prepare_data(host, cmd); } else { - sdhci_writew(host, data->blocks, SDHCI_BLOCK_COUNT); + sdhci_external_dma_release(host); + pr_err("%s: Cannot use external DMA, switch to the DMA/PIO which standard SDHCI provides.\n", + mmc_hostname(host->mmc)); + sdhci_prepare_data(host, cmd); } } +static void sdhci_external_dma_pre_transfer(struct sdhci_host *host, + struct mmc_command *cmd) +{ + struct dma_chan *chan; + + if (!cmd->data) + return; + + chan = sdhci_external_dma_channel(host, cmd->data); + if (chan) + dma_async_issue_pending(chan); +} + +#else + +static inline int sdhci_external_dma_init(struct sdhci_host *host) +{ + return -EOPNOTSUPP; +} + +static inline void sdhci_external_dma_release(struct sdhci_host *host) +{ +} + +static inline void sdhci_external_dma_prepare_data(struct sdhci_host *host, + struct mmc_command *cmd) +{ + /* This should never happen */ + WARN_ON_ONCE(1); +} + +static inline void sdhci_external_dma_pre_transfer(struct sdhci_host *host, + struct mmc_command *cmd) +{ +} + +static inline struct dma_chan *sdhci_external_dma_channel(struct sdhci_host *host, + struct mmc_data *data) +{ + return NULL; +} + +#endif + +void sdhci_switch_external_dma(struct sdhci_host *host, bool en) +{ + host->use_external_dma = en; +} +EXPORT_SYMBOL_GPL(sdhci_switch_external_dma); + static inline bool sdhci_auto_cmd12(struct sdhci_host *host, struct mmc_request *mrq) { @@ -1245,22 +1436,10 @@ static bool sdhci_needs_reset(struct sdhci_host *host, struct mmc_request *mrq) (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))); } -static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) +static void sdhci_set_mrq_done(struct sdhci_host *host, struct mmc_request *mrq) { int i; - if (host->cmd && host->cmd->mrq == mrq) - host->cmd = NULL; - - if (host->data_cmd && host->data_cmd->mrq == mrq) - host->data_cmd = NULL; - - if (host->data && host->data->mrq == mrq) - host->data = NULL; - - if (sdhci_needs_reset(host, mrq)) - host->pending_reset = true; - for (i = 0; i < SDHCI_MAX_MRQS; i++) { if (host->mrqs_done[i] == mrq) { WARN_ON(1); @@ -1276,6 +1455,23 @@ static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) } WARN_ON(i >= SDHCI_MAX_MRQS); +} + +static void __sdhci_finish_mrq(struct sdhci_host *host, struct mmc_request *mrq) +{ + if (host->cmd && host->cmd->mrq == mrq) + host->cmd = NULL; + + if (host->data_cmd && host->data_cmd->mrq == mrq) + host->data_cmd = NULL; + + if (host->data && host->data->mrq == mrq) + host->data = NULL; + + if (sdhci_needs_reset(host, mrq)) + host->pending_reset = true; + + sdhci_set_mrq_done(host, mrq); sdhci_del_timer(host, mrq); @@ -1326,12 +1522,12 @@ static void sdhci_finish_data(struct sdhci_host *host) /* * Need to send CMD12 if - - * a) open-ended multiblock transfer (no CMD23) + * a) open-ended multiblock transfer not using auto CMD12 (no CMD23) * b) error in multiblock transfer */ if (data->stop && - (data->error || - !data->mrq->sbc)) { + ((!data->mrq->sbc && !sdhci_auto_cmd12(host, data->mrq)) || + data->error)) { /* * 'cap_cmd_during_tfr' request must not use the command line * after mmc_command_done() has been called. It is upper layer's @@ -1390,12 +1586,19 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) } host->cmd = cmd; + host->data_timeout = 0; if (sdhci_data_line_cmd(cmd)) { WARN_ON(host->data_cmd); host->data_cmd = cmd; + sdhci_set_timeout(host, cmd); } - sdhci_prepare_data(host, cmd); + if (cmd->data) { + if (host->use_external_dma) + sdhci_external_dma_prepare_data(host, cmd); + else + sdhci_prepare_data(host, cmd); + } sdhci_writel(host, cmd->arg, SDHCI_ARGUMENT); @@ -1437,6 +1640,9 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) timeout += 10 * HZ; sdhci_mod_timer(host, cmd->mrq, timeout); + if (host->use_external_dma) + sdhci_external_dma_pre_transfer(host, cmd); + sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), SDHCI_COMMAND); } EXPORT_SYMBOL_GPL(sdhci_send_command); @@ -1825,17 +2031,6 @@ void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq) sdhci_led_activate(host); - /* - * Ensure we don't send the STOP for non-SET_BLOCK_COUNTED - * requests if Auto-CMD12 is enabled. - */ - if (sdhci_auto_cmd12(host, mrq)) { - if (mrq->stop) { - mrq->data->stop = NULL; - mrq->stop = NULL; - } - } - if (!present || host->flags & SDHCI_DEVICE_DEAD) { mrq->cmd->error = -ENOMEDIUM; sdhci_finish_mrq(host, mrq); @@ -2661,6 +2856,17 @@ static bool sdhci_request_done(struct sdhci_host *host) if (host->flags & SDHCI_REQ_USE_DMA) { struct mmc_data *data = mrq->data; + if (host->use_external_dma && data && + (mrq->cmd->error || data->error)) { + struct dma_chan *chan = sdhci_external_dma_channel(host, data); + + host->mrqs_done[i] = NULL; + spin_unlock_irqrestore(&host->lock, flags); + dmaengine_terminate_sync(chan); + spin_lock_irqsave(&host->lock, flags); + sdhci_set_mrq_done(host, mrq); + } + if (data && data->host_cookie == COOKIE_MAPPED) { if (host->bounce_buffer) { /* @@ -3796,6 +4002,21 @@ int sdhci_setup_host(struct sdhci_host *host) if (sdhci_can_64bit_dma(host)) host->flags |= SDHCI_USE_64_BIT_DMA; + if (host->use_external_dma) { + ret = sdhci_external_dma_init(host); + if (ret == -EPROBE_DEFER) + goto unreg; + /* + * Fall back to use the DMA/PIO integrated in standard SDHCI + * instead of external DMA devices. + */ + else if (ret) + sdhci_switch_external_dma(host, false); + /* Disable internal DMA sources */ + else + host->flags &= ~(SDHCI_USE_SDMA | SDHCI_USE_ADMA); + } + if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { if (host->ops->set_dma_mask) ret = host->ops->set_dma_mask(host); @@ -3822,15 +4043,13 @@ int sdhci_setup_host(struct sdhci_host *host) dma_addr_t dma; void *buf; - if (host->flags & SDHCI_USE_64_BIT_DMA) { - host->adma_table_sz = host->adma_table_cnt * - SDHCI_ADMA2_64_DESC_SZ(host); - host->desc_sz = SDHCI_ADMA2_64_DESC_SZ(host); - } else { - host->adma_table_sz = host->adma_table_cnt * - SDHCI_ADMA2_32_DESC_SZ; - host->desc_sz = SDHCI_ADMA2_32_DESC_SZ; - } + if (!(host->flags & SDHCI_USE_64_BIT_DMA)) + host->alloc_desc_sz = SDHCI_ADMA2_32_DESC_SZ; + else if (!host->alloc_desc_sz) + host->alloc_desc_sz = SDHCI_ADMA2_64_DESC_SZ(host); + + host->desc_sz = host->alloc_desc_sz; + host->adma_table_sz = host->adma_table_cnt * host->desc_sz; host->align_buffer_sz = SDHCI_MAX_SEGS * SDHCI_ADMA2_ALIGN; /* @@ -4278,6 +4497,10 @@ void sdhci_cleanup_host(struct sdhci_host *host) dma_free_coherent(mmc_dev(mmc), host->align_buffer_sz + host->adma_table_sz, host->align_buffer, host->align_addr); + + if (host->use_external_dma) + sdhci_external_dma_release(host); + host->adma_table = NULL; host->align_buffer = NULL; } @@ -4323,6 +4546,7 @@ int __sdhci_add_host(struct sdhci_host *host) pr_info("%s: SDHCI controller on %s [%s] using %s\n", mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)), + host->use_external_dma ? "External DMA" : (host->flags & SDHCI_USE_ADMA) ? (host->flags & SDHCI_USE_64_BIT_DMA) ? "ADMA 64-bit" : "ADMA" : (host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO"); @@ -4411,6 +4635,9 @@ void sdhci_remove_host(struct sdhci_host *host, int dead) host->adma_table_sz, host->align_buffer, host->align_addr); + if (host->use_external_dma) + sdhci_external_dma_release(host); + host->adma_table = NULL; host->align_buffer = NULL; } diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index fe83ece6965b..a6a3ddcf97e7 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -487,6 +487,7 @@ struct sdhci_host { int irq; /* Device IRQ */ void __iomem *ioaddr; /* Mapped address */ + phys_addr_t mapbase; /* physical address base */ char *bounce_buffer; /* For packing SDMA reads/writes */ dma_addr_t bounce_addr; unsigned int bounce_buffer_size; @@ -535,6 +536,7 @@ struct sdhci_host { bool pending_reset; /* Cmd/data reset is pending */ bool irq_wake_enabled; /* IRQ wakeup is enabled */ bool v4_mode; /* Host Version 4 Enable */ + bool use_external_dma; /* Host selects to use external DMA */ struct mmc_request *mrqs_done[SDHCI_MAX_MRQS]; /* Requests done */ struct mmc_command *cmd; /* Current command */ @@ -556,7 +558,8 @@ struct sdhci_host { dma_addr_t adma_addr; /* Mapped ADMA descr. table */ dma_addr_t align_addr; /* Mapped bounce buffer */ - unsigned int desc_sz; /* ADMA descriptor size */ + unsigned int desc_sz; /* ADMA current descriptor size */ + unsigned int alloc_desc_sz; /* ADMA descr. max size host supports */ struct workqueue_struct *complete_wq; /* Request completion wq */ struct work_struct complete_work; /* Request completion work */ @@ -564,6 +567,11 @@ struct sdhci_host { struct timer_list timer; /* Timer for timeouts */ struct timer_list data_timer; /* Timer for data timeouts */ +#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA) + struct dma_chan *rx_chan; + struct dma_chan *tx_chan; +#endif + u32 caps; /* CAPABILITY_0 */ u32 caps1; /* CAPABILITY_1 */ bool read_caps; /* Capability flags have been read */ @@ -795,5 +803,8 @@ void sdhci_end_tuning(struct sdhci_host *host); void sdhci_reset_tuning(struct sdhci_host *host); void sdhci_send_tuning(struct sdhci_host *host, u32 opcode); void sdhci_abort_tuning(struct sdhci_host *host, u32 opcode); +void sdhci_switch_external_dma(struct sdhci_host *host, bool en); +void sdhci_set_data_timeout_irq(struct sdhci_host *host, bool enable); +void __sdhci_set_timeout(struct sdhci_host *host, struct mmc_command *cmd); #endif /* __SDHCI_HW_H */ diff --git a/drivers/mmc/host/sdhci_am654.c b/drivers/mmc/host/sdhci_am654.c index b8fe94fd9525..3afea580fbea 100644 --- a/drivers/mmc/host/sdhci_am654.c +++ b/drivers/mmc/host/sdhci_am654.c @@ -505,7 +505,6 @@ static int sdhci_am654_probe(struct platform_device *pdev) struct sdhci_am654_data *sdhci_am654; const struct of_device_id *match; struct sdhci_host *host; - struct resource *res; struct clk *clk_xin; struct device *dev = &pdev->dev; void __iomem *base; @@ -538,8 +537,7 @@ static int sdhci_am654_probe(struct platform_device *pdev) goto pm_runtime_disable; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - base = devm_ioremap_resource(dev, res); + base = devm_platform_ioremap_resource(pdev, 1); if (IS_ERR(base)) { ret = PTR_ERR(base); goto pm_runtime_put; diff --git a/drivers/mmc/host/sdhci_f_sdh30.c b/drivers/mmc/host/sdhci_f_sdh30.c index fa0dfc657c22..4625cc071b61 100644 --- a/drivers/mmc/host/sdhci_f_sdh30.c +++ b/drivers/mmc/host/sdhci_f_sdh30.c @@ -89,7 +89,6 @@ static int sdhci_f_sdh30_probe(struct platform_device *pdev) { struct sdhci_host *host; struct device *dev = &pdev->dev; - struct resource *res; int irq, ctrl = 0, ret = 0; struct f_sdhost_priv *priv; u32 reg = 0; @@ -123,8 +122,7 @@ static int sdhci_f_sdh30_probe(struct platform_device *pdev) host->ops = &sdhci_f_sdh30_ops; host->irq = irq; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - host->ioaddr = devm_ioremap_resource(&pdev->dev, res); + host->ioaddr = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(host->ioaddr)) { ret = PTR_ERR(host->ioaddr); goto err; diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index 98c575de43c7..7e1fd557109c 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -432,8 +432,12 @@ static void sh_mmcif_request_dma(struct sh_mmcif_host *host) host->chan_rx = sh_mmcif_request_dma_pdata(host, pdata->slave_id_rx); } else { - host->chan_tx = dma_request_slave_channel(dev, "tx"); - host->chan_rx = dma_request_slave_channel(dev, "rx"); + host->chan_tx = dma_request_chan(dev, "tx"); + if (IS_ERR(host->chan_tx)) + host->chan_tx = NULL; + host->chan_rx = dma_request_chan(dev, "rx"); + if (IS_ERR(host->chan_rx)) + host->chan_rx = NULL; } dev_dbg(dev, "%s: got channel TX %p RX %p\n", __func__, host->chan_tx, host->chan_rx); @@ -1388,7 +1392,6 @@ static int sh_mmcif_probe(struct platform_device *pdev) struct sh_mmcif_host *host; struct device *dev = &pdev->dev; struct sh_mmcif_plat_data *pd = dev->platform_data; - struct resource *res; void __iomem *reg; const char *name; @@ -1397,8 +1400,7 @@ static int sh_mmcif_probe(struct platform_device *pdev) if (irq[0] < 0) return -ENXIO; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - reg = devm_ioremap_resource(dev, res); + reg = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(reg)) return PTR_ERR(reg); diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c index d577a6b0ceae..f87d7967457f 100644 --- a/drivers/mmc/host/sunxi-mmc.c +++ b/drivers/mmc/host/sunxi-mmc.c @@ -1273,8 +1273,7 @@ static int sunxi_mmc_resource_request(struct sunxi_mmc_host *host, if (ret) return ret; - host->reg_base = devm_ioremap_resource(&pdev->dev, - platform_get_resource(pdev, IORESOURCE_MEM, 0)); + host->reg_base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(host->reg_base)) return PTR_ERR(host->reg_base); diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c index c4a1d49fbea4..1e424bcdbd5f 100644 --- a/drivers/mmc/host/tmio_mmc_core.c +++ b/drivers/mmc/host/tmio_mmc_core.c @@ -1109,12 +1109,10 @@ struct tmio_mmc_host *tmio_mmc_host_alloc(struct platform_device *pdev, { struct tmio_mmc_host *host; struct mmc_host *mmc; - struct resource *res; void __iomem *ctl; int ret; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - ctl = devm_ioremap_resource(&pdev->dev, res); + ctl = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(ctl)) return ERR_CAST(ctl); @@ -1181,7 +1179,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host) * Look for a card detect GPIO, if it fails with anything * else than a probe deferral, just live without it. */ - ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0, NULL); + ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0); if (ret == -EPROBE_DEFER) return ret; diff --git a/drivers/mmc/host/uniphier-sd.c b/drivers/mmc/host/uniphier-sd.c index 0c72ec5546c3..a1683c49cb90 100644 --- a/drivers/mmc/host/uniphier-sd.c +++ b/drivers/mmc/host/uniphier-sd.c @@ -59,7 +59,6 @@ struct uniphier_sd_priv { struct tmio_mmc_data tmio_data; struct pinctrl *pinctrl; - struct pinctrl_state *pinstate_default; struct pinctrl_state *pinstate_uhs; struct clk *clk; struct reset_control *rst; @@ -500,13 +499,12 @@ static int uniphier_sd_start_signal_voltage_switch(struct mmc_host *mmc, { struct tmio_mmc_host *host = mmc_priv(mmc); struct uniphier_sd_priv *priv = uniphier_sd_priv(host); - struct pinctrl_state *pinstate; + struct pinctrl_state *pinstate = NULL; u32 val, tmp; switch (ios->signal_voltage) { case MMC_SIGNAL_VOLTAGE_330: val = UNIPHIER_SD_VOLT_330; - pinstate = priv->pinstate_default; break; case MMC_SIGNAL_VOLTAGE_180: val = UNIPHIER_SD_VOLT_180; @@ -521,7 +519,10 @@ static int uniphier_sd_start_signal_voltage_switch(struct mmc_host *mmc, tmp |= FIELD_PREP(UNIPHIER_SD_VOLT_MASK, val); writel(tmp, host->ctl + UNIPHIER_SD_VOLT); - pinctrl_select_state(priv->pinctrl, pinstate); + if (pinstate) + pinctrl_select_state(priv->pinctrl, pinstate); + else + pinctrl_select_default_state(mmc_dev(mmc)); return 0; } @@ -533,11 +534,6 @@ static int uniphier_sd_uhs_init(struct tmio_mmc_host *host, if (IS_ERR(priv->pinctrl)) return PTR_ERR(priv->pinctrl); - priv->pinstate_default = pinctrl_lookup_state(priv->pinctrl, - PINCTRL_STATE_DEFAULT); - if (IS_ERR(priv->pinstate_default)) - return PTR_ERR(priv->pinstate_default); - priv->pinstate_uhs = pinctrl_lookup_state(priv->pinctrl, "uhs"); if (IS_ERR(priv->pinstate_uhs)) return PTR_ERR(priv->pinstate_uhs); diff --git a/drivers/mmc/host/usdhi6rol0.c b/drivers/mmc/host/usdhi6rol0.c index b11ac2314328..9a0b1e4e405d 100644 --- a/drivers/mmc/host/usdhi6rol0.c +++ b/drivers/mmc/host/usdhi6rol0.c @@ -199,7 +199,6 @@ struct usdhi6_host { /* Pin control */ struct pinctrl *pinctrl; - struct pinctrl_state *pins_default; struct pinctrl_state *pins_uhs; }; @@ -677,12 +676,14 @@ static void usdhi6_dma_request(struct usdhi6_host *host, phys_addr_t start) }; int ret; - host->chan_tx = dma_request_slave_channel(mmc_dev(host->mmc), "tx"); + host->chan_tx = dma_request_chan(mmc_dev(host->mmc), "tx"); dev_dbg(mmc_dev(host->mmc), "%s: TX: got channel %p\n", __func__, host->chan_tx); - if (!host->chan_tx) + if (IS_ERR(host->chan_tx)) { + host->chan_tx = NULL; return; + } cfg.direction = DMA_MEM_TO_DEV; cfg.dst_addr = start + USDHI6_SD_BUF0; @@ -692,12 +693,14 @@ static void usdhi6_dma_request(struct usdhi6_host *host, phys_addr_t start) if (ret < 0) goto e_release_tx; - host->chan_rx = dma_request_slave_channel(mmc_dev(host->mmc), "rx"); + host->chan_rx = dma_request_chan(mmc_dev(host->mmc), "rx"); dev_dbg(mmc_dev(host->mmc), "%s: RX: got channel %p\n", __func__, host->chan_rx); - if (!host->chan_rx) + if (IS_ERR(host->chan_rx)) { + host->chan_rx = NULL; goto e_release_tx; + } cfg.direction = DMA_DEV_TO_MEM; cfg.src_addr = cfg.dst_addr; @@ -1162,8 +1165,7 @@ static int usdhi6_set_pinstates(struct usdhi6_host *host, int voltage) host->pins_uhs); default: - return pinctrl_select_state(host->pinctrl, - host->pins_default); + return pinctrl_select_default_state(mmc_dev(host->mmc)); } } @@ -1770,17 +1772,6 @@ static int usdhi6_probe(struct platform_device *pdev) } host->pins_uhs = pinctrl_lookup_state(host->pinctrl, "state_uhs"); - if (!IS_ERR(host->pins_uhs)) { - host->pins_default = pinctrl_lookup_state(host->pinctrl, - PINCTRL_STATE_DEFAULT); - - if (IS_ERR(host->pins_default)) { - dev_err(dev, - "UHS pinctrl requires a default pin state.\n"); - ret = PTR_ERR(host->pins_default); - goto e_free_mmc; - } - } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); host->base = devm_ioremap_resource(dev, res); diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 2bbd8ee93507..46600d9380ea 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -1535,15 +1535,8 @@ int pinctrl_init_done(struct device *dev) return ret; } -#ifdef CONFIG_PM - -/** - * pinctrl_pm_select_state() - select pinctrl state for PM - * @dev: device to select default state for - * @state: state to set - */ -static int pinctrl_pm_select_state(struct device *dev, - struct pinctrl_state *state) +static int pinctrl_select_bound_state(struct device *dev, + struct pinctrl_state *state) { struct dev_pin_info *pins = dev->pins; int ret; @@ -1558,15 +1551,27 @@ static int pinctrl_pm_select_state(struct device *dev, } /** - * pinctrl_pm_select_default_state() - select default pinctrl state for PM + * pinctrl_select_default_state() - select default pinctrl state * @dev: device to select default state for */ -int pinctrl_pm_select_default_state(struct device *dev) +int pinctrl_select_default_state(struct device *dev) { if (!dev->pins) return 0; - return pinctrl_pm_select_state(dev, dev->pins->default_state); + return pinctrl_select_bound_state(dev, dev->pins->default_state); +} +EXPORT_SYMBOL_GPL(pinctrl_select_default_state); + +#ifdef CONFIG_PM + +/** + * pinctrl_pm_select_default_state() - select default pinctrl state for PM + * @dev: device to select default state for + */ +int pinctrl_pm_select_default_state(struct device *dev) +{ + return pinctrl_select_default_state(dev); } EXPORT_SYMBOL_GPL(pinctrl_pm_select_default_state); @@ -1579,7 +1584,7 @@ int pinctrl_pm_select_sleep_state(struct device *dev) if (!dev->pins) return 0; - return pinctrl_pm_select_state(dev, dev->pins->sleep_state); + return pinctrl_select_bound_state(dev, dev->pins->sleep_state); } EXPORT_SYMBOL_GPL(pinctrl_pm_select_sleep_state); @@ -1592,7 +1597,7 @@ int pinctrl_pm_select_idle_state(struct device *dev) if (!dev->pins) return 0; - return pinctrl_pm_select_state(dev, dev->pins->idle_state); + return pinctrl_select_bound_state(dev, dev->pins->idle_state); } EXPORT_SYMBOL_GPL(pinctrl_pm_select_idle_state); #endif diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h index 5215fdba6b9a..bf2d017dd7b7 100644 --- a/include/linux/gpio/consumer.h +++ b/include/linux/gpio/consumer.h @@ -158,6 +158,7 @@ int gpiod_set_raw_array_value_cansleep(unsigned int array_size, int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce); int gpiod_set_transitory(struct gpio_desc *desc, bool transitory); +void gpiod_toggle_active_low(struct gpio_desc *desc); int gpiod_is_active_low(const struct gpio_desc *desc); int gpiod_cansleep(const struct gpio_desc *desc); @@ -483,6 +484,12 @@ static inline int gpiod_set_transitory(struct gpio_desc *desc, bool transitory) return -ENOSYS; } +static inline void gpiod_toggle_active_low(struct gpio_desc *desc) +{ + /* GPIO can never have been requested */ + WARN_ON(desc); +} + static inline int gpiod_is_active_low(const struct gpio_desc *desc) { /* GPIO can never have been requested */ diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h index 739b7bf37eaa..8ba042430d8e 100644 --- a/include/linux/mfd/tmio.h +++ b/include/linux/mfd/tmio.h @@ -79,9 +79,6 @@ /* Some controllers have a CBSY bit */ #define TMIO_MMC_HAVE_CBSY BIT(11) -/* Some controllers that support HS400 use 4 taps while others use 8. */ -#define TMIO_MMC_HAVE_4TAP_HS400 BIT(13) - int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base); int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base); void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state); diff --git a/include/linux/mmc/slot-gpio.h b/include/linux/mmc/slot-gpio.h index 0de3d7c016cd..4ae2f2908f99 100644 --- a/include/linux/mmc/slot-gpio.h +++ b/include/linux/mmc/slot-gpio.h @@ -17,10 +17,9 @@ int mmc_gpio_get_ro(struct mmc_host *host); int mmc_gpio_get_cd(struct mmc_host *host); int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id, unsigned int idx, bool override_active_level, - unsigned int debounce, bool *gpio_invert); + unsigned int debounce); int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id, - unsigned int idx, - unsigned int debounce, bool *gpio_invert); + unsigned int idx, unsigned int debounce); void mmc_gpio_set_cd_isr(struct mmc_host *host, irqreturn_t (*isr)(int irq, void *dev_id)); int mmc_gpio_set_cd_wake(struct mmc_host *host, bool on); diff --git a/include/linux/pinctrl/consumer.h b/include/linux/pinctrl/consumer.h index 7f8c7d9583d3..019fecd75d0c 100644 --- a/include/linux/pinctrl/consumer.h +++ b/include/linux/pinctrl/consumer.h @@ -40,6 +40,7 @@ extern int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *s); extern struct pinctrl * __must_check devm_pinctrl_get(struct device *dev); extern void devm_pinctrl_put(struct pinctrl *p); +extern int pinctrl_select_default_state(struct device *dev); #ifdef CONFIG_PM extern int pinctrl_pm_select_default_state(struct device *dev); @@ -122,6 +123,11 @@ static inline void devm_pinctrl_put(struct pinctrl *p) { } +static inline int pinctrl_select_default_state(struct device *dev) +{ + return 0; +} + static inline int pinctrl_pm_select_default_state(struct device *dev) { return 0; |