summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-03-15 17:13:39 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-03-15 17:13:39 -0700
commit538e7e96fd028e628d79f27c05a9a61ff9d01c7c (patch)
treefb0451b8eb7dbbf54b2d15bf8e2e1fb06f645543
parent0c48ca8512ec099059fc532de57dbc6ffbccfb86 (diff)
parentfecfb64422d91a9621a3f96ab75c3a5f13e80b58 (diff)
Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck. * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (zl6100) Enable interval between chip accesses for all chips hwmon: (w83627ehf) Describe undocumented pwm attributes hwmon: (w83627ehf) Fix temp2 source for W83627UHG hwmon: (w83627ehf) Fix memory leak in probe function hwmon: (w83627ehf) Fix writing into fan_stop_time for NCT6775F/NCT6776F
-rw-r--r--Documentation/hwmon/w83627ehf9
-rw-r--r--Documentation/hwmon/zl610014
-rw-r--r--drivers/hwmon/pmbus/zl6100.c12
-rw-r--r--drivers/hwmon/w83627ehf.c17
4 files changed, 24 insertions, 28 deletions
diff --git a/Documentation/hwmon/w83627ehf b/Documentation/hwmon/w83627ehf
index 3f44dbdfda70..ceaf6f652b00 100644
--- a/Documentation/hwmon/w83627ehf
+++ b/Documentation/hwmon/w83627ehf
@@ -50,7 +50,7 @@ W83627DHG, W83627DHG-P, W83627UHG, W83667HG, W83667HG-B, W83667HG-I
(NCT6775F), and NCT6776F super I/O chips. We will refer to them collectively
as Winbond chips.
-The chips implement 2 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
+The chips implement 3 to 4 temperature sensors (9 for NCT6775F and NCT6776F),
2 to 5 fan rotation speed sensors, 8 to 10 analog voltage sensors, one VID
(except for 627UHG), alarms with beep warnings (control unimplemented),
and some automatic fan regulation strategies (plus manual fan control mode).
@@ -143,8 +143,13 @@ pwm[1-4]_min_output - minimum fan speed (range 1 - 255), when the temperature
pwm[1-4]_stop_time - how many milliseconds [ms] must elapse to switch
corresponding fan off. (when the temperature was below
defined range).
+pwm[1-4]_start_output-minimum fan speed (range 1 - 255) when spinning up
+pwm[1-4]_step_output- rate of fan speed change (1 - 255)
+pwm[1-4]_stop_output- minimum fan speed (range 1 - 255) when spinning down
+pwm[1-4]_max_output - maximum fan speed (range 1 - 255), when the temperature
+ is above defined range.
-Note: last two functions are influenced by other control bits, not yet exported
+Note: last six functions are influenced by other control bits, not yet exported
by the driver, so a change might not have any effect.
Implementation Details
diff --git a/Documentation/hwmon/zl6100 b/Documentation/hwmon/zl6100
index 51f76a189fee..a4e8d90f59f6 100644
--- a/Documentation/hwmon/zl6100
+++ b/Documentation/hwmon/zl6100
@@ -88,14 +88,12 @@ Module parameters
delay
-----
-Some Intersil/Zilker Labs DC-DC controllers require a minimum interval between
-I2C bus accesses. According to Intersil, the minimum interval is 2 ms, though
-1 ms appears to be sufficient and has not caused any problems in testing.
-The problem is known to affect ZL6100, ZL2105, and ZL2008. It is known not to
-affect ZL2004 and ZL6105. The driver automatically sets the interval to 1 ms
-except for ZL2004 and ZL6105. To enable manual override, the driver provides a
-writeable module parameter, 'delay', which can be used to set the interval to
-a value between 0 and 65,535 microseconds.
+Intersil/Zilker Labs DC-DC controllers require a minimum interval between I2C
+bus accesses. According to Intersil, the minimum interval is 2 ms, though 1 ms
+appears to be sufficient and has not caused any problems in testing. The problem
+is known to affect all currently supported chips. For manual override, the
+driver provides a writeable module parameter, 'delay', which can be used to set
+the interval to a value between 0 and 65,535 microseconds.
Sysfs entries
diff --git a/drivers/hwmon/pmbus/zl6100.c b/drivers/hwmon/pmbus/zl6100.c
index 880b90cf4d32..e3e8420b7b81 100644
--- a/drivers/hwmon/pmbus/zl6100.c
+++ b/drivers/hwmon/pmbus/zl6100.c
@@ -200,17 +200,11 @@ static int zl6100_probe(struct i2c_client *client,
data->id = mid->driver_data;
/*
- * ZL2005, ZL2008, ZL2105, and ZL6100 are known to require a wait time
- * between I2C accesses. ZL2004 and ZL6105 are known to be safe.
- * Other chips have not yet been tested.
- *
- * Only clear the wait time for chips known to be safe. The wait time
- * can be cleared later for additional chips if tests show that it
- * is not needed (in other words, better be safe than sorry).
+ * According to information from the chip vendor, all currently
+ * supported chips are known to require a wait time between I2C
+ * accesses.
*/
data->delay = delay;
- if (data->id == zl2004 || data->id == zl6105)
- data->delay = 0;
/*
* Since there was a direct I2C device access above, wait before
diff --git a/drivers/hwmon/w83627ehf.c b/drivers/hwmon/w83627ehf.c
index 5276d1933dbc..a658d62c5e10 100644
--- a/drivers/hwmon/w83627ehf.c
+++ b/drivers/hwmon/w83627ehf.c
@@ -39,7 +39,7 @@
0x8860 0xa1
w83627dhg 9 5 4 3 0xa020 0xc1 0x5ca3
w83627dhg-p 9 5 4 3 0xb070 0xc1 0x5ca3
- w83627uhg 8 2 2 2 0xa230 0xc1 0x5ca3
+ w83627uhg 8 2 2 3 0xa230 0xc1 0x5ca3
w83667hg 9 5 3 3 0xa510 0xc1 0x5ca3
w83667hg-b 9 5 3 4 0xb350 0xc1 0x5ca3
nct6775f 9 4 3 9 0xb470 0xc1 0x5ca3
@@ -1607,7 +1607,7 @@ store_##reg(struct device *dev, struct device_attribute *attr, \
val = step_time_to_reg(val, data->pwm_mode[nr]); \
mutex_lock(&data->update_lock); \
data->reg[nr] = val; \
- w83627ehf_write_value(data, W83627EHF_REG_##REG[nr], val); \
+ w83627ehf_write_value(data, data->REG_##REG[nr], val); \
mutex_unlock(&data->update_lock); \
return count; \
} \
@@ -2004,7 +2004,8 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
goto exit;
}
- data = kzalloc(sizeof(struct w83627ehf_data), GFP_KERNEL);
+ data = devm_kzalloc(&pdev->dev, sizeof(struct w83627ehf_data),
+ GFP_KERNEL);
if (!data) {
err = -ENOMEM;
goto exit_release;
@@ -2157,16 +2158,16 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
w83627ehf_set_temp_reg_ehf(data, 3);
/*
- * Temperature sources for temp1 and temp2 are selected with
+ * Temperature sources for temp2 and temp3 are selected with
* bank 0, registers 0x49 and 0x4a.
*/
data->temp_src[0] = 0; /* SYSTIN */
reg = w83627ehf_read_value(data, 0x49) & 0x07;
/* Adjust to have the same mapping as other source registers */
if (reg == 0)
- data->temp_src[1]++;
+ data->temp_src[1] = 1;
else if (reg >= 2 && reg <= 5)
- data->temp_src[1] += 2;
+ data->temp_src[1] = reg + 2;
else /* should never happen */
data->have_temp &= ~(1 << 1);
reg = w83627ehf_read_value(data, 0x4a);
@@ -2493,9 +2494,8 @@ static int __devinit w83627ehf_probe(struct platform_device *pdev)
exit_remove:
w83627ehf_device_remove_files(dev);
- kfree(data);
- platform_set_drvdata(pdev, NULL);
exit_release:
+ platform_set_drvdata(pdev, NULL);
release_region(res->start, IOREGION_LENGTH);
exit:
return err;
@@ -2509,7 +2509,6 @@ static int __devexit w83627ehf_remove(struct platform_device *pdev)
w83627ehf_device_remove_files(&pdev->dev);
release_region(data->addr, IOREGION_LENGTH);
platform_set_drvdata(pdev, NULL);
- kfree(data);
return 0;
}