summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-05-09 16:13:38 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2015-05-09 16:13:38 -0700
commit8f59ae0643b2057ad996ab23488e9be1ba2564f4 (patch)
treec5bc7c71d551455cd3f5d22726ab7ffcef8aff5e
parent51dfcb076d1e1ce7006aa272cb7c4514740c7e47 (diff)
parentc9d862c48c48883a4327ae82f4a6de1eef928d60 (diff)
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann: "A few patches have come up since the merge window. The largest one is a rewrite of the PXA lubbock/mainstone IRQ handling. This was already broken in 2011 by a change to the GPIO code and only noticed now. The other changes contained here are: MAINTAINERS file updates: - Ray Jui and Scott Branden are now co-maintainers for some of the mach-bcm chips, while Christian Daudt and Marc Carino have stepped down. - Andrew Victor is no longer maintaining at91. Instead, Alexandre Belloni now becomes an official maintainer, after having done a bulk of the work for a while. - Baruch Siach, who added the mach-digicolor platform in 4.1 is now listed as maintainer - The git URL for mach-socfpga has changed Bug fixes: - Three bug fixes for new rockchip rk3288 code - A regression fix to make SD card support work on certain ux500 boards - multiple smaller dts fixes for imx, omap, mvebu, and shmobile - a regression fiix for omap3 power consumption - a fix for regression in the ARM CCI bus driver Configuration changes: - more imx platforms are now enabled in multi_v7_defconfig" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) MAINTAINERS: add Conexant Digicolor machines entry MAINTAINERS: socfpga: update the git repo for SoCFPGA ARM: multi_v7_defconfig: Select more FSL SoCs MAINTAINERS: replace an AT91 maintainer drivers: CCI: fix used_mask init in validate_group() bus: omap_l3_noc: Fix master id address decoding for OMAP5 bus: omap_l3_noc: Fix offset for DRA7 CLK1_HOST_CLK1_2 instance ARM: dts: dra7: Fix efuse register size for ABB ARM: dts: am57xx-beagle-x15: Switch GPIO fan number ARM: dts: am57xx-beagle-x15: Switch UART mux pins ARM: dts: am437x-sk: reduce col-scan-delay-us ARM: dts: am437x-sk: fix for new newhaven display module revision ARM: dts: am57xx-beagle-x15: Fix RTC aliases ARM: dts: am57xx-beagle-x15: Fix IRQ type for mcp7941x ARM: dts: omap3: Add #iommu-cells to isp and iva iommu ARM: omap2plus_defconfig: Enable EXTCON_USB_GPIO ARM: dts: OMAP3-N900: Add microphone bias voltages ARM: OMAP2+: Fix omap off idle power consumption creeping up MAINTAINERS: Update brcmstb entry MAINTAINERS: Remove Christian Daudt for mach-bcm ...
-rw-r--r--CREDITS7
-rw-r--r--Documentation/devicetree/bindings/arm/omap/l3-noc.txt1
-rw-r--r--Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt2
-rw-r--r--MAINTAINERS18
-rw-r--r--arch/arm/boot/dts/am437x-sk-evm.dts4
-rw-r--r--arch/arm/boot/dts/am57xx-beagle-x15.dts11
-rw-r--r--arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts4
-rw-r--r--arch/arm/boot/dts/dra7.dtsi10
-rw-r--r--arch/arm/boot/dts/imx23-olinuxino.dts4
-rw-r--r--arch/arm/boot/dts/imx25.dtsi1
-rw-r--r--arch/arm/boot/dts/imx28.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi2
-rw-r--r--arch/arm/boot/dts/imx6qdl-sabreauto.dtsi1
-rw-r--r--arch/arm/boot/dts/omap3-n900.dts4
-rw-r--r--arch/arm/boot/dts/omap3.dtsi2
-rw-r--r--arch/arm/boot/dts/omap5.dtsi2
-rw-r--r--arch/arm/boot/dts/r8a7791-koelsch.dts2
-rw-r--r--arch/arm/boot/dts/ste-dbx5x0.dtsi17
-rw-r--r--arch/arm/boot/dts/ste-href.dtsi15
-rw-r--r--arch/arm/boot/dts/ste-snowball.dts13
-rw-r--r--arch/arm/configs/multi_v7_defconfig3
-rw-r--r--arch/arm/configs/omap2plus_defconfig2
-rw-r--r--arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c2
-rw-r--r--arch/arm/mach-omap2/prm-regbits-34xx.h1
-rw-r--r--arch/arm/mach-omap2/prm-regbits-44xx.h1
-rw-r--r--arch/arm/mach-omap2/vc.c12
-rw-r--r--arch/arm/mach-omap2/vc.h2
-rw-r--r--arch/arm/mach-omap2/vc3xxx_data.c1
-rw-r--r--arch/arm/mach-omap2/vc44xx_data.c1
-rw-r--r--arch/arm/mach-pxa/Kconfig9
-rw-r--r--arch/arm/mach-pxa/Makefile1
-rw-r--r--arch/arm/mach-pxa/include/mach/lubbock.h7
-rw-r--r--arch/arm/mach-pxa/include/mach/mainstone.h6
-rw-r--r--arch/arm/mach-pxa/lubbock.c108
-rw-r--r--arch/arm/mach-pxa/mainstone.c115
-rw-r--r--arch/arm/mach-pxa/pxa_cplds_irqs.c200
-rw-r--r--arch/arm/mach-rockchip/pm.c33
-rw-r--r--arch/arm/mach-rockchip/pm.h8
-rw-r--r--arch/arm/mach-rockchip/rockchip.c19
-rw-r--r--drivers/bus/arm-cci.c2
-rw-r--r--drivers/bus/omap_l3_noc.c5
-rw-r--r--drivers/bus/omap_l3_noc.h54
42 files changed, 480 insertions, 234 deletions
diff --git a/CREDITS b/CREDITS
index 40cc4bfb34db..ec7e6c7fdd1b 100644
--- a/CREDITS
+++ b/CREDITS
@@ -3709,6 +3709,13 @@ N: Dirk Verworner
D: Co-author of German book ``Linux-Kernel-Programmierung''
D: Co-founder of Berlin Linux User Group
+N: Andrew Victor
+E: linux@maxim.org.za
+W: http://maxim.org.za/at91_26.html
+D: First maintainer of Atmel ARM-based SoC, aka AT91
+D: Introduced support for at91rm9200, the first chip of AT91 family
+S: South Africa
+
N: Riku Voipio
E: riku.voipio@iki.fi
D: Author of PCA9532 LED and Fintek f75375s hwmon driver
diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
index 974624ea68f6..161448da959d 100644
--- a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
+++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
@@ -6,6 +6,7 @@ provided by Arteris.
Required properties:
- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
Should be "ti,omap4-l3-noc" for OMAP4 family
+ Should be "ti,omap5-l3-noc" for OMAP5 family
Should be "ti,dra7-l3-noc" for DRA7 family
Should be "ti,am4372-l3-noc" for AM43 family
- reg: Contains L3 register address range for each noc domain.
diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
index a4873e5e3e36..e30e184f50c7 100644
--- a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
@@ -38,7 +38,7 @@ dma_apbx: dma-apbx@80024000 {
80 81 68 69
70 71 72 73
74 75 76 77>;
- interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+ interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
"saif0", "saif1", "i2c0", "i2c1",
"auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
"auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
diff --git a/MAINTAINERS b/MAINTAINERS
index 19395134063d..590304b96b03 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -892,11 +892,10 @@ S: Maintained
F: arch/arm/mach-alpine/
ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
-M: Andrew Victor <linux@maxim.org.za>
M: Nicolas Ferre <nicolas.ferre@atmel.com>
+M: Alexandre Belloni <alexandre.belloni@free-electrons.com>
M: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W: http://maxim.org.za/at91_26.html
W: http://www.linux4sam.org
S: Supported
F: arch/arm/mach-at91/
@@ -990,6 +989,12 @@ F: drivers/clocksource/timer-prima2.c
F: drivers/clocksource/timer-atlas7.c
N: [^a-z]sirf
+ARM/CONEXANT DIGICOLOR MACHINE SUPPORT
+M: Baruch Siach <baruch@tkos.co.il>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+N: digicolor
+
ARM/EBSA110 MACHINE SUPPORT
M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1439,9 +1444,10 @@ ARM/SOCFPGA ARCHITECTURE
M: Dinh Nguyen <dinguyen@opensource.altera.com>
S: Maintained
F: arch/arm/mach-socfpga/
+F: arch/arm/boot/dts/socfpga*
+F: arch/arm/configs/socfpga_defconfig
W: http://www.rocketboards.org
-T: git://git.rocketboards.org/linux-socfpga.git
-T: git://git.rocketboards.org/linux-socfpga-next.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT
M: Dinh Nguyen <dinguyen@opensource.altera.com>
@@ -2116,8 +2122,9 @@ S: Supported
F: drivers/net/ethernet/broadcom/bnx2x/
BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
-M: Christian Daudt <bcm@fixthebug.org>
M: Florian Fainelli <f.fainelli@gmail.com>
+M: Ray Jui <rjui@broadcom.com>
+M: Scott Branden <sbranden@broadcom.com>
L: bcm-kernel-feedback-list@broadcom.com
T: git git://github.com/broadcom/mach-bcm
S: Maintained
@@ -2168,7 +2175,6 @@ S: Maintained
F: drivers/usb/gadget/udc/bcm63xx_udc.*
BROADCOM BCM7XXX ARM ARCHITECTURE
-M: Marc Carino <marc.ceeeee@gmail.com>
M: Brian Norris <computersforpeace@gmail.com>
M: Gregory Fong <gregory.0xf0@gmail.com>
M: Florian Fainelli <f.fainelli@gmail.com>
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 8ae29c955c11..c17097d2c167 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -49,7 +49,7 @@
pinctrl-0 = <&matrix_keypad_pins>;
debounce-delay-ms = <5>;
- col-scan-delay-us = <1500>;
+ col-scan-delay-us = <5>;
row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */
&gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */
@@ -473,7 +473,7 @@
interrupt-parent = <&gpio0>;
interrupts = <31 0>;
- wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
touchscreen-size-x = <480>;
touchscreen-size-y = <272>;
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 15f198e4864d..7128fad991ac 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -18,6 +18,7 @@
aliases {
rtc0 = &mcp_rtc;
rtc1 = &tps659038_rtc;
+ rtc2 = &rtc;
};
memory {
@@ -83,7 +84,7 @@
gpio_fan: gpio_fan {
/* Based on 5v 500mA AFB02505HHB */
compatible = "gpio-fan";
- gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
+ gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
gpio-fan,speed-map = <0 0>,
<13000 1>;
#cooling-cells = <2>;
@@ -130,8 +131,8 @@
uart3_pins_default: uart3_pins_default {
pinctrl-single,pins = <
- 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */
- 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */
+ 0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
+ 0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
>;
};
@@ -455,7 +456,7 @@
mcp_rtc: rtc@6f {
compatible = "microchip,mcp7941x";
reg = <0x6f>;
- interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>; /* IRQ_SYS_1N */
+ interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>; /* IRQ_SYS_1N */
pinctrl-names = "default";
pinctrl-0 = <&mcp79410_pins_default>;
@@ -478,7 +479,7 @@
&uart3 {
status = "okay";
interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
- <&dra7_pmx_core 0x248>;
+ <&dra7_pmx_core 0x3f8>;
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins_default>;
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index e3b08fb959e5..990e8a2100f0 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -105,6 +105,10 @@
};
internal-regs {
+ rtc@10300 {
+ /* No crystal connected to the internal RTC */
+ status = "disabled";
+ };
serial@12000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 5332b57b4950..f03a091cd076 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -911,7 +911,7 @@
ti,clock-cycles = <16>;
reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
- <0x4ae06014 0x4>, <0x4a003b20 0x8>,
+ <0x4ae06014 0x4>, <0x4a003b20 0xc>,
<0x4ae0c158 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
@@ -944,7 +944,7 @@
ti,clock-cycles = <16>;
reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
- <0x4ae06010 0x4>, <0x4a0025cc 0x8>,
+ <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
<0x4a002470 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
@@ -977,7 +977,7 @@
ti,clock-cycles = <16>;
reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
- <0x4ae06010 0x4>, <0x4a0025e0 0x8>,
+ <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
<0x4a00246c 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
@@ -1010,7 +1010,7 @@
ti,clock-cycles = <16>;
reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
- <0x4ae06010 0x4>, <0x4a003b08 0x8>,
+ <0x4ae06010 0x4>, <0x4a003b08 0xc>,
<0x4ae0c154 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
@@ -1203,7 +1203,7 @@
status = "disabled";
};
- rtc@48838000 {
+ rtc: rtc@48838000 {
compatible = "ti,am3352-rtc";
reg = <0x48838000 0x100>;
interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index 7e6eef2488e8..82045398bf1f 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -12,6 +12,7 @@
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "imx23.dtsi"
/ {
@@ -93,6 +94,7 @@
ahb@80080000 {
usb0: usb@80080000 {
+ dr_mode = "host";
vbus-supply = <&reg_usb0_vbus>;
status = "okay";
};
@@ -122,7 +124,7 @@
user {
label = "green";
- gpios = <&gpio2 1 1>;
+ gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
};
};
};
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index e4d3aecc4ed2..677f81d9dcd5 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -428,6 +428,7 @@
pwm4: pwm@53fc8000 {
compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
+ #pwm-cells = <2>;
reg = <0x53fc8000 0x4000>;
clocks = <&clks 108>, <&clks 52>;
clock-names = "ipg", "per";
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 25e25f82fbae..4e073e854742 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -913,7 +913,7 @@
80 81 68 69
70 71 72 73
74 75 76 77>;
- interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+ interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
"saif0", "saif1", "i2c0", "i2c1",
"auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
"auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 19cc269a08d4..1ce6133b67f5 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -31,6 +31,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 15 0>;
+ enable-active-high;
};
reg_usb_h1_vbus: regulator@1 {
@@ -40,6 +41,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 0 0>;
+ enable-active-high;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 46b2fed7c319..3b24b12651b2 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -185,7 +185,6 @@
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
- pinctrl-assert-gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
status = "okay";
max7310_a: gpio@30 {
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index a29315833ecd..5c16145920ea 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -498,6 +498,8 @@
DRVDD-supply = <&vmmc2>;
IOVDD-supply = <&vio>;
DVDD-supply = <&vio>;
+
+ ai3x-micbias-vg = <1>;
};
tlv320aic3x_aux: tlv320aic3x@19 {
@@ -509,6 +511,8 @@
DRVDD-supply = <&vmmc2>;
IOVDD-supply = <&vio>;
DVDD-supply = <&vio>;
+
+ ai3x-micbias-vg = <2>;
};
tsl2563: tsl2563@29 {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index d18a90f5eca3..69a40cfc1f29 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -456,6 +456,7 @@
};
mmu_isp: mmu@480bd400 {
+ #iommu-cells = <0>;
compatible = "ti,omap2-iommu";
reg = <0x480bd400 0x80>;
interrupts = <24>;
@@ -464,6 +465,7 @@
};
mmu_iva: mmu@5d000000 {
+ #iommu-cells = <0>;
compatible = "ti,omap2-iommu";
reg = <0x5d000000 0x80>;
interrupts = <28>;
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index efe5f737f39b..7d24ae0306b5 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -128,7 +128,7 @@
* hierarchy.
*/
ocp {
- compatible = "ti,omap4-l3-noc", "simple-bus";
+ compatible = "ti,omap5-l3-noc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 74c3212f1f11..824ddab9c3ad 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -545,7 +545,7 @@
compatible = "adi,adv7511w";
reg = <0x39>;
interrupt-parent = <&gpio3>;
- interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
index bfd3f1c734b8..2201cd5da3bb 100644
--- a/arch/arm/boot/dts/ste-dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -1017,23 +1017,6 @@
status = "disabled";
};
- vmmci: regulator-gpio {
- compatible = "regulator-gpio";
-
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2900000>;
- regulator-name = "mmci-reg";
- regulator-type = "voltage";
-
- startup-delay-us = <100>;
- enable-active-high;
-
- states = <1800000 0x1
- 2900000 0x0>;
-
- status = "disabled";
- };
-
mcde@a0350000 {
compatible = "stericsson,mcde";
reg = <0xa0350000 0x1000>, /* MCDE */
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index bf8f0eddc2c0..744c1e3a744d 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -111,6 +111,21 @@
pinctrl-1 = <&i2c3_sleep_mode>;
};
+ vmmci: regulator-gpio {
+ compatible = "regulator-gpio";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-name = "mmci-reg";
+ regulator-type = "voltage";
+
+ startup-delay-us = <100>;
+ enable-active-high;
+
+ states = <1800000 0x1
+ 2900000 0x0>;
+ };
+
// External Micro SD slot
sdi0_per1@80126000 {
arm,primecell-periphid = <0x10480180>;
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 206826a855c0..1bc84ebdccaa 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -146,8 +146,21 @@
};
vmmci: regulator-gpio {
+ compatible = "regulator-gpio";
+
gpios = <&gpio7 4 0x4>;
enable-gpio = <&gpio6 25 0x4>;
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-name = "mmci-reg";
+ regulator-type = "voltage";
+
+ startup-delay-us = <100>;
+ enable-active-high;
+
+ states = <1800000 0x1
+ 2900000 0x0>;
};
// External Micro SD slot
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index ab86655c1f4b..0ca4a3eaf65d 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -39,11 +39,14 @@ CONFIG_ARCH_HIP04=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARCH_MESON=y
CONFIG_ARCH_MXC=y
+CONFIG_SOC_IMX50=y
CONFIG_SOC_IMX51=y
CONFIG_SOC_IMX53=y
CONFIG_SOC_IMX6Q=y
CONFIG_SOC_IMX6SL=y
+CONFIG_SOC_IMX6SX=y
CONFIG_SOC_VF610=y
+CONFIG_SOC_LS1021A=y
CONFIG_ARCH_OMAP3=y
CONFIG_ARCH_OMAP4=y
CONFIG_SOC_OMAP5=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 9ff7b54b2a83..3743ca221d40 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -393,7 +393,7 @@ CONFIG_TI_EDMA=y
CONFIG_DMA_OMAP=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXTCON=m
-CONFIG_EXTCON_GPIO=m
+CONFIG_EXTCON_USB_GPIO=m
CONFIG_EXTCON_PALMAS=m
CONFIG_TI_EMIF=m
CONFIG_PWM=y
diff --git a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
index fb8d4a2ad48c..a5edd7d60266 100644
--- a/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
+++ b/arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
+ * Copyright (C) 2010 Pengutronix, Wolfram Sang <kernel@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index cbefbd7cfdb5..661d753df584 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -112,6 +112,7 @@
#define OMAP3430_VC_CMD_ONLP_SHIFT 16
#define OMAP3430_VC_CMD_RET_SHIFT 8
#define OMAP3430_VC_CMD_OFF_SHIFT 0
+#define OMAP3430_SREN_MASK (1 << 4)
#define OMAP3430_HSEN_MASK (1 << 3)
#define OMAP3430_MCODE_MASK (0x7 << 0)
#define OMAP3430_VALID_MASK (1 << 24)
diff --git a/arch/arm/mach-omap2/prm-regbits-44xx.h b/arch/arm/mach-omap2/prm-regbits-44xx.h
index b1c7a33e00e7..e794828dee55 100644
--- a/arch/arm/mach-omap2/prm-regbits-44xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-44xx.h
@@ -35,6 +35,7 @@
#define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT 1
#define OMAP4430_GLOBAL_WUEN_MASK (1 << 16)
#define OMAP4430_HSMCODE_MASK (0x7 << 0)
+#define OMAP4430_SRMODEEN_MASK (1 << 4)
#define OMAP4430_HSMODEEN_MASK (1 << 3)
#define OMAP4430_HSSCLL_SHIFT 24
#define OMAP4430_ICEPICK_RST_SHIFT 9
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index be9ef834fa81..076fd20d7e5a 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -316,7 +316,8 @@ static void __init omap3_vc_init_pmic_signaling(struct voltagedomain *voltdm)
* idle. And we can also scale voltages to zero for off-idle.
* Note that no actual voltage scaling during off-idle will
* happen unless the board specific twl4030 PMIC scripts are
- * loaded.
+ * loaded. See also omap_vc_i2c_init for comments regarding
+ * erratum i531.
*/
val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET);
if (!(val & OMAP3430_PRM_VOLTCTRL_SEL_OFF)) {
@@ -704,9 +705,16 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm)
return;
}
+ /*
+ * Note that for omap3 OMAP3430_SREN_MASK clears SREN to work around
+ * erratum i531 "Extra Power Consumed When Repeated Start Operation
+ * Mode Is Enabled on I2C Interface Dedicated for Smart Reflex (I2C4)".
+ * Otherwise I2C4 eventually leads into about 23mW extra power being
+ * consumed even during off idle using VMODE.
+ */
i2c_high_speed = voltdm->pmic->i2c_high_speed;
if (i2c_high_speed)
- voltdm->rmw(vc->common->i2c_cfg_hsen_mask,
+ voltdm->rmw(vc->common->i2c_cfg_clear_mask,
vc->common->i2c_cfg_hsen_mask,
vc->common->i2c_cfg_reg);
diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h
index cdbdd78e755e..89b83b7ff3ec 100644
--- a/arch/arm/mach-omap2/vc.h
+++ b/arch/arm/mach-omap2/vc.h
@@ -34,6 +34,7 @@ struct voltagedomain;
* @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register
* @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register
* @i2c_cfg_reg: I2C configuration register offset
+ * @i2c_cfg_clear_mask: high-speed mode bit clear mask in I2C config register
* @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register
* @i2c_mcode_mask: MCODE field mask for I2C config register
*
@@ -52,6 +53,7 @@ struct omap_vc_common {
u8 cmd_ret_shift;
u8 cmd_off_shift;
u8 i2c_cfg_reg;
+ u8 i2c_cfg_clear_mask;
u8 i2c_cfg_hsen_mask;
u8 i2c_mcode_mask;
};
diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c
index 75bc4aa22b3a..71d74c9172c1 100644
--- a/arch/arm/mach-omap2/vc3xxx_data.c
+++ b/arch/arm/mach-omap2/vc3xxx_data.c
@@ -40,6 +40,7 @@ static struct omap_vc_common omap3_vc_common = {
.cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT,
.cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT,
.cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT,
+ .i2c_cfg_clear_mask = OMAP3430_SREN_MASK | OMAP3430_HSEN_MASK,
.i2c_cfg_hsen_mask = OMAP3430_HSEN_MASK,
.i2c_cfg_reg = OMAP3_PRM_VC_I2C_CFG_OFFSET,
.i2c_mcode_mask = OMAP3430_MCODE_MASK,
diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c
index 085e5d6a04fd..2abd5fa8a697 100644
--- a/arch/arm/mach-omap2/vc44xx_data.c
+++ b/arch/arm/mach-omap2/vc44xx_data.c
@@ -42,6 +42,7 @@ static const struct omap_vc_common omap4_vc_common = {
.cmd_ret_shift = OMAP4430_RET_SHIFT,
.cmd_off_shift = OMAP4430_OFF_SHIFT,
.i2c_cfg_reg = OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET,
+ .i2c_cfg_clear_mask = OMAP4430_SRMODEEN_MASK | OMAP4430_HSMODEEN_MASK,
.i2c_cfg_hsen_mask = OMAP4430_HSMODEEN_MASK,
.i2c_mcode_mask = OMAP4430_HSMCODE_MASK,
};
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 8896e71586f5..f09683687963 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -691,4 +691,13 @@ config SHARPSL_PM_MAX1111
config PXA310_ULPI
bool
+config PXA_SYSTEMS_CPLDS
+ tristate "Motherboard cplds"
+ default ARCH_LUBBOCK || MACH_MAINSTONE
+ help
+ This driver supports the Lubbock and Mainstone multifunction chip
+ found on the pxa25x development platform system (Lubbock) and pxa27x
+ development platform system (Mainstone). This IO board supports the
+ interrupts handling, ethernet controller, flash chips, etc ...
+
endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index eb0bf7678a99..4087d334ecdf 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -90,4 +90,5 @@ obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o
obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o
obj-$(CONFIG_MACH_ZIPIT2) += z2.o
+obj-$(CONFIG_PXA_SYSTEMS_CPLDS) += pxa_cplds_irqs.o
obj-$(CONFIG_TOSA_BT) += tosa-bt.o
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
index 958cd6af9384..1eecf794acd2 100644
--- a/arch/arm/mach-pxa/include/mach/lubbock.h
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -37,7 +37,9 @@
#define LUB_GP __LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
/* Board specific IRQs */
-#define LUBBOCK_IRQ(x) (IRQ_BOARD_START + (x))
+#define LUBBOCK_NR_IRQS IRQ_BOARD_START
+
+#define LUBBOCK_IRQ(x) (LUBBOCK_NR_IRQS + (x))
#define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0)
#define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1)
#define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */
@@ -47,8 +49,7 @@
#define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */
#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6)
-#define LUBBOCK_SA1111_IRQ_BASE (IRQ_BOARD_START + 16)
-#define LUBBOCK_NR_IRQS (IRQ_BOARD_START + 16 + 55)
+#define LUBBOCK_SA1111_IRQ_BASE (LUBBOCK_NR_IRQS + 32)
#ifndef __ASSEMBLY__
extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
index 1bfc4e822a41..e82a7d31104e 100644
--- a/arch/arm/mach-pxa/include/mach/mainstone.h
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -120,7 +120,9 @@
#define MST_PCMCIA_PWR_VCC_50 0x4 /* voltage VCC = 5.0V */
/* board specific IRQs */
-#define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x))
+#define MAINSTONE_NR_IRQS IRQ_BOARD_START
+
+#define MAINSTONE_IRQ(x) (MAINSTONE_NR_IRQS + (x))
#define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0)
#define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1)
#define MAINSTONE_USBC_IRQ MAINSTONE_IRQ(2)
@@ -136,6 +138,4 @@
#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14)
#define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15)
-#define MAINSTONE_NR_IRQS (IRQ_BOARD_START + 16)
-
#endif
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index d8a1be619f21..4ac9ab80d24b 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -12,6 +12,7 @@
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -123,84 +124,6 @@ void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
}
EXPORT_SYMBOL(lubbock_set_misc_wr);
-static unsigned long lubbock_irq_enabled;
-
-static void lubbock_mask_irq(struct irq_data *d)
-{
- int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
- LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
-}
-
-static void lubbock_unmask_irq(struct irq_data *d)
-{
- int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
- /* the irq can be acknowledged only if deasserted, so it's done here */
- LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
- LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
-}
-
-static struct irq_chip lubbock_irq_chip = {
- .name = "FPGA",
- .irq_ack = lubbock_mask_irq,
- .irq_mask = lubbock_mask_irq,
- .irq_unmask = lubbock_unmask_irq,
-};
-
-static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
- do {
- /* clear our parent irq */
- desc->irq_data.chip->irq_ack(&desc->irq_data);
- if (likely(pending)) {
- irq = LUBBOCK_IRQ(0) + __ffs(pending);
- generic_handle_irq(irq);
- }
- pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
- } while (pending);
-}
-
-static void __init lubbock_init_irq(void)
-{
- int irq;
-
- pxa25x_init_irq();
-
- /* setup extra lubbock irqs */
- for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
- irq_set_chip_and_handler(irq, &lubbock_irq_chip,
- handle_level_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
-
- irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler);
- irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-#ifdef CONFIG_PM
-
-static void lubbock_irq_resume(void)
-{
- LUB_IRQ_MASK_EN = lubbock_irq_enabled;
-}
-
-static struct syscore_ops lubbock_irq_syscore_ops = {
- .resume = lubbock_irq_resume,
-};
-
-static int __init lubbock_irq_device_init(void)
-{
- if (machine_is_lubbock()) {
- register_syscore_ops(&lubbock_irq_syscore_ops);
- return 0;
- }
- return -ENODEV;
-}
-
-device_initcall(lubbock_irq_device_init);
-
-#endif
-
static int lubbock_udc_is_connected(void)
{
return (LUB_MISC_RD & (1 << 9)) == 0;
@@ -383,11 +306,38 @@ static struct platform_device lubbock_flash_device[2] = {
},
};
+static struct resource lubbock_cplds_resources[] = {
+ [0] = {
+ .start = LUBBOCK_FPGA_PHYS + 0xc0,
+ .end = LUBBOCK_FPGA_PHYS + 0xe0 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_GPIO_TO_IRQ(0),
+ .end = PXA_GPIO_TO_IRQ(0),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+ },
+ [2] = {
+ .start = LUBBOCK_IRQ(0),
+ .end = LUBBOCK_IRQ(6),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device lubbock_cplds_device = {
+ .name = "pxa_cplds_irqs",
+ .id = -1,
+ .resource = &lubbock_cplds_resources[0],
+ .num_resources = 3,
+};
+
+
static struct platform_device *devices[] __initdata = {
&sa1111_device,
&smc91x_device,
&lubbock_flash_device[0],
&lubbock_flash_device[1],
+ &lubbock_cplds_device,
};
static struct pxafb_mode_info sharp_lm8v31_mode = {
@@ -648,7 +598,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
/* Maintainer: MontaVista Software Inc. */
.map_io = lubbock_map_io,
.nr_irqs = LUBBOCK_NR_IRQS,
- .init_irq = lubbock_init_irq,
+ .init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.init_time = pxa_timer_init,
.init_machine = lubbock_init,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 78b84c0dfc79..2c0658cf6be2 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -13,6 +13,7 @@
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
+#include <linux/gpio/machine.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
@@ -122,92 +123,6 @@ static unsigned long mainstone_pin_config[] = {
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
};
-static unsigned long mainstone_irq_enabled;
-
-static void mainstone_mask_irq(struct irq_data *d)
-{
- int mainstone_irq = (d->irq - MAINSTONE_IRQ(0));
- MST_INTMSKENA = (mainstone_irq_enabled &= ~(1 << mainstone_irq));
-}
-
-static void mainstone_unmask_irq(struct irq_data *d)
-{
- int mainstone_irq = (d->irq - MAINSTONE_IRQ(0));
- /* the irq can be acknowledged only if deasserted, so it's done here */
- MST_INTSETCLR &= ~(1 << mainstone_irq);
- MST_INTMSKENA = (mainstone_irq_enabled |= (1 << mainstone_irq));
-}
-
-static struct irq_chip mainstone_irq_chip = {
- .name = "FPGA",
- .irq_ack = mainstone_mask_irq,
- .irq_mask = mainstone_mask_irq,
- .irq_unmask = mainstone_unmask_irq,
-};
-
-static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc)
-{
- unsigned long pending = MST_INTSETCLR & mainstone_irq_enabled;
- do {
- /* clear useless edge notification */
- desc->irq_data.chip->irq_ack(&desc->irq_data);
- if (likely(pending)) {
- irq = MAINSTONE_IRQ(0) + __ffs(pending);
- generic_handle_irq(irq);
- }
- pending = MST_INTSETCLR & mainstone_irq_enabled;
- } while (pending);
-}
-
-static void __init mainstone_init_irq(void)
-{
- int irq;
-
- pxa27x_init_irq();
-
- /* setup extra Mainstone irqs */
- for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {
- irq_set_chip_and_handler(irq, &mainstone_irq_chip,
- handle_level_irq);
- if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14))
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
- else
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
- }
- set_irq_flags(MAINSTONE_IRQ(8), 0);
- set_irq_flags(MAINSTONE_IRQ(12), 0);
-
- MST_INTMSKENA = 0;
- MST_INTSETCLR = 0;
-
- irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), mainstone_irq_handler);
- irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
-}
-
-#ifdef CONFIG_PM
-
-static void mainstone_irq_resume(void)
-{
- MST_INTMSKENA = mainstone_irq_enabled;
-}
-
-static struct syscore_ops mainstone_irq_syscore_ops = {
- .resume = mainstone_irq_resume,
-};
-
-static int __init mainstone_irq_device_init(void)
-{
- if (machine_is_mainstone())
- register_syscore_ops(&mainstone_irq_syscore_ops);
-
- return 0;
-}
-
-device_initcall(mainstone_irq_device_init);
-
-#endif
-
-
static struct resource smc91x_resources[] = {
[0] = {
.start = (MST_ETH_PHYS + 0x300),
@@ -487,11 +402,37 @@ static struct platform_device mst_gpio_keys_device = {
},
};
+static struct resource mst_cplds_resources[] = {
+ [0] = {
+ .start = MST_FPGA_PHYS + 0xc0,
+ .end = MST_FPGA_PHYS + 0xe0 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = PXA_GPIO_TO_IRQ(0),
+ .end = PXA_GPIO_TO_IRQ(0),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+ },
+ [2] = {
+ .start = MAINSTONE_IRQ(0),
+ .end = MAINSTONE_IRQ(15),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device mst_cplds_device = {
+ .name = "pxa_cplds_irqs",
+ .id = -1,
+ .resource = &mst_cplds_resources[0],
+ .num_resources = 3,
+};
+
static struct platform_device *platform_devices[] __initdata = {
&smc91x_device,
&mst_flash_device[0],
&mst_flash_device[1],
&mst_gpio_keys_device,
+ &mst_cplds_device,
};
static struct pxaohci_platform_data mainstone_ohci_platform_data = {
@@ -718,7 +659,7 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
.atag_offset = 0x100, /* BLOB boot parameter setting */
.map_io = mainstone_map_io,
.nr_irqs = MAINSTONE_NR_IRQS,
- .init_irq = mainstone_init_irq,
+ .init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.init_time = pxa_timer_init,
.init_machine = mainstone_init,
diff --git a/arch/arm/mach-pxa/pxa_cplds_irqs.c b/arch/arm/mach-pxa/pxa_cplds_irqs.c
new file mode 100644
index 000000000000..f1aeb54fabe3
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa_cplds_irqs.c
@@ -0,0 +1,200 @@
+/*
+ * Intel Reference Systems cplds
+ *
+ * Copyright (C) 2014 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Cplds motherboard driver, supporting lubbock and mainstone SoC board.
+ */
+
+#include <linux/bitops.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+
+#define FPGA_IRQ_MASK_EN 0x0
+#define FPGA_IRQ_SET_CLR 0x10
+
+#define CPLDS_NB_IRQ 32
+
+struct cplds {
+ void __iomem *base;
+ int irq;
+ unsigned int irq_mask;
+ struct gpio_desc *gpio0;
+ struct irq_domain *irqdomain;
+};
+
+static irqreturn_t cplds_irq_handler(int in_irq, void *d)
+{
+ struct cplds *fpga = d;
+ unsigned long pending;
+ unsigned int bit;
+
+ pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask;
+ for_each_set_bit(bit, &pending, CPLDS_NB_IRQ)
+ generic_handle_irq(irq_find_mapping(fpga->irqdomain, bit));
+
+ return IRQ_HANDLED;
+}
+
+static void cplds_irq_mask_ack(struct irq_data *d)
+{
+ struct cplds *fpga = irq_data_get_irq_chip_data(d);
+ unsigned int cplds_irq = irqd_to_hwirq(d);
+ unsigned int set, bit = BIT(cplds_irq);
+
+ fpga->irq_mask &= ~bit;
+ writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+ set = readl(fpga->base + FPGA_IRQ_SET_CLR);
+ writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR);
+}
+
+static void cplds_irq_unmask(struct irq_data *d)
+{
+ struct cplds *fpga = irq_data_get_irq_chip_data(d);
+ unsigned int cplds_irq = irqd_to_hwirq(d);
+ unsigned int bit = BIT(cplds_irq);
+
+ fpga->irq_mask |= bit;
+ writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+}
+
+static struct irq_chip cplds_irq_chip = {
+ .name = "pxa_cplds",
+ .irq_mask_ack = cplds_irq_mask_ack,
+ .irq_unmask = cplds_irq_unmask,
+ .flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
+};
+
+static int cplds_irq_domain_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ struct cplds *fpga = d->host_data;
+
+ irq_set_chip_and_handler(irq, &cplds_irq_chip, handle_level_irq);
+ irq_set_chip_data(irq, fpga);
+
+ return 0;
+}
+
+static const struct irq_domain_ops cplds_irq_domain_ops = {
+ .xlate = irq_domain_xlate_twocell,
+ .map = cplds_irq_domain_map,
+};
+
+static int cplds_resume(struct platform_device *pdev)
+{
+ struct cplds *fpga = platform_get_drvdata(pdev);
+
+ writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+
+ return 0;
+}
+
+static int cplds_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct cplds *fpga;
+ int ret;
+ unsigned int base_irq = 0;
+ unsigned long irqflags = 0;
+
+ fpga = devm_kzalloc(&pdev->dev, sizeof(*fpga), GFP_KERNEL);
+ if (!fpga)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (res) {
+ fpga->irq = (unsigned int)res->start;
+ irqflags = res->flags;
+ }
+ if (!fpga->irq)
+ return -ENODEV;
+
+ base_irq = platform_get_irq(pdev, 1);
+ if (base_irq < 0)
+ base_irq = 0;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ fpga->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(fpga->base))
+ return PTR_ERR(fpga->base);
+
+ platform_set_drvdata(pdev, fpga);
+
+ writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
+ writel(0, fpga->base + FPGA_IRQ_SET_CLR);
+
+ ret = devm_request_irq(&pdev->dev, fpga->irq, cplds_irq_handler,
+ irqflags, dev_name(&pdev->dev), fpga);
+ if (ret == -ENOSYS)
+ return -EPROBE_DEFER;
+
+ if (ret) {
+ dev_err(&pdev->dev, "couldn't request main irq%d: %d\n",
+ fpga->irq, ret);
+ return ret;
+ }
+
+ irq_set_irq_wake(fpga->irq, 1);
+ fpga->irqdomain = irq_domain_add_linear(pdev->dev.of_node,
+ CPLDS_NB_IRQ,
+ &cplds_irq_domain_ops, fpga);
+ if (!fpga->irqdomain)
+ return -ENODEV;
+
+ if (base_irq) {
+ ret = irq_create_strict_mappings(fpga->irqdomain, base_irq, 0,
+ CPLDS_NB_IRQ);
+ if (ret) {
+ dev_err(&pdev->dev, "couldn't create the irq mapping %d..%d\n",
+ base_irq, base_irq + CPLDS_NB_IRQ);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int cplds_remove(struct platform_device *pdev)
+{
+ struct cplds *fpga = platform_get_drvdata(pdev);
+
+ irq_set_chip_and_handler(fpga->irq, NULL, NULL);
+
+ return 0;
+}
+
+static const struct of_device_id cplds_id_table[] = {
+ { .compatible = "intel,lubbock-cplds-irqs", },
+ { .compatible = "intel,mainstone-cplds-irqs", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, cplds_id_table);
+
+static struct platform_driver cplds_driver = {
+ .driver = {
+ .name = "pxa_cplds_irqs",
+ .of_match_table = of_match_ptr(cplds_id_table),
+ },
+ .probe = cplds_probe,
+ .remove = cplds_remove,
+ .resume = cplds_resume,
+};
+
+module_platform_driver(cplds_driver);
+
+MODULE_DESCRIPTION("PXA Cplds interrupts driver");
+MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-rockchip/pm.c b/arch/arm/mach-rockchip/pm.c
index b07d88602073..22812fe06460 100644
--- a/arch/arm/mach-rockchip/pm.c
+++ b/arch/arm/mach-rockchip/pm.c
@@ -44,9 +44,11 @@ static void __iomem *rk3288_bootram_base;
static phys_addr_t rk3288_bootram_phy;
static struct regmap *pmu_regmap;
+static struct regmap *grf_regmap;
static struct regmap *sgrf_regmap;
static u32 rk3288_pmu_pwr_mode_con;
+static u32 rk3288_grf_soc_con0;
static u32 rk3288_sgrf_soc_con0;
static inline u32 rk3288_l2_config(void)
@@ -70,12 +72,26 @@ static void rk3288_slp_mode_set(int level)
{
u32 mode_set, mode_set1;
+ regmap_read(grf_regmap, RK3288_GRF_SOC_CON0, &rk3288_grf_soc_con0);
+
regmap_read(sgrf_regmap, RK3288_SGRF_SOC_CON0, &rk3288_sgrf_soc_con0);
regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON,
&rk3288_pmu_pwr_mode_con);
/*
+ * We need set this bit GRF_FORCE_JTAG here, for the debug module,
+ * otherwise, it may become inaccessible after resume.
+ * This creates a potential security issue, as the sdmmc pins may
+ * accept jtag data for a short time during resume if no card is
+ * inserted.
+ * But this is of course also true for the regular boot, before we
+ * turn of the jtag/sdmmc autodetect.
+ */
+ regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, GRF_FORCE_JTAG |
+ GRF_FORCE_JTAG_WRITE);
+
+ /*
* SGRF_FAST_BOOT_EN - system to boot from FAST_BOOT_ADDR
* PCLK_WDT_GATE - disable WDT during suspend.
*/
@@ -83,6 +99,13 @@ static void rk3288_slp_mode_set(int level)
SGRF_PCLK_WDT_GATE | SGRF_FAST_BOOT_EN
| SGRF_PCLK_WDT_GATE_WRITE | SGRF_FAST_BOOT_EN_WRITE);
+ /*
+ * The dapswjdp can not auto reset before resume, that cause it may
+ * access some illegal address during resume. Let's disable it before
+ * suspend, and the MASKROM will enable it back.
+ */
+ regmap_write(sgrf_regmap, RK3288_SGRF_CPU_CON0, SGRF_DAPDEVICEEN_WRITE);
+
/* booting address of resuming system is from this register value */
regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR,
rk3288_bootram_phy);
@@ -128,6 +151,9 @@ static void rk3288_slp_mode_set_resume(void)
regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0,
rk3288_sgrf_soc_con0 | SGRF_PCLK_WDT_GATE_WRITE
| SGRF_FAST_BOOT_EN_WRITE);
+
+ regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, rk3288_grf_soc_con0 |
+ GRF_FORCE_JTAG_WRITE);
}
static int rockchip_lpmode_enter(unsigned long arg)
@@ -186,6 +212,13 @@ static int rk3288_suspend_init(struct device_node *np)
return PTR_ERR(pmu_regmap);
}
+ grf_regmap = syscon_regmap_lookup_by_compatible(
+ "rockchip,rk3288-grf");
+ if (IS_ERR(grf_regmap)) {
+ pr_err("%s: could not find grf regmap\n", __func__);
+ return PTR_ERR(pmu_regmap);
+ }
+
sram_np = of_find_compatible_node(NULL, NULL,
"rockchip,rk3288-pmu-sram");
if (!sram_np) {
diff --git a/arch/arm/mach-rockchip/pm.h b/arch/arm/mach-rockchip/pm.h
index 03ff31d8282d..f8a747bc1437 100644
--- a/arch/arm/mach-rockchip/pm.h
+++ b/arch/arm/mach-rockchip/pm.h
@@ -48,6 +48,10 @@ static inline void rockchip_suspend_init(void)
#define RK3288_PMU_WAKEUP_RST_CLR_CNT 0x44
#define RK3288_PMU_PWRMODE_CON1 0x90
+#define RK3288_GRF_SOC_CON0 0x244
+#define GRF_FORCE_JTAG BIT(12)
+#define GRF_FORCE_JTAG_WRITE BIT(28)
+
#define RK3288_SGRF_SOC_CON0 (0x0000)
#define RK3288_SGRF_FAST_BOOT_ADDR (0x0120)
#define SGRF_PCLK_WDT_GATE BIT(6)
@@ -55,6 +59,10 @@ static inline void rockchip_suspend_init(void)
#define SGRF_FAST_BOOT_EN BIT(8)
#define SGRF_FAST_BOOT_EN_WRITE BIT(24)
+#define RK3288_SGRF_CPU_CON0 (0x40)
+#define SGRF_DAPDEVICEEN BIT(0)
+#define SGRF_DAPDEVICEEN_WRITE BIT(16)
+
#define RK3288_CRU_MODE_CON 0x50
#define RK3288_CRU_SEL0_CON 0x60
#define RK3288_CRU_SEL1_CON 0x64
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index d360ec044b66..b6cf3b449428 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -30,11 +30,30 @@
#include "pm.h"
#define RK3288_GRF_SOC_CON0 0x244
+#define RK3288_TIMER6_7_PHYS 0xff810000
static void __init rockchip_timer_init(void)
{
if (of_machine_is_compatible("rockchip,rk3288")) {
struct regmap *grf;
+ void __iomem *reg_base;
+
+ /*
+ * Most/all uboot versions for rk3288 don't enable timer7
+ * which is needed for the architected timer to work.
+ * So make sure it is running during early boot.
+ */
+ reg_base = ioremap(RK3288_TIMER6_7_PHYS, SZ_16K);
+ if (reg_base) {
+ writel(0, reg_base + 0x30);
+ writel(0xffffffff, reg_base + 0x20);
+ writel(0xffffffff, reg_base + 0x24);
+ writel(1, reg_base + 0x30);
+ dsb();
+ iounmap(reg_base);
+ } else {
+ pr_err("rockchip: could not map timer7 registers\n");
+ }
/*
* Disable auto jtag/sdmmc switching that causes issues
diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
index b854125e4831..5340604b23a4 100644
--- a/drivers/bus/arm-cci.c
+++ b/drivers/bus/arm-cci.c
@@ -660,7 +660,7 @@ validate_group(struct perf_event *event)
* Initialise the fake PMU. We only need to populate the
* used_mask for the purposes of validation.
*/
- .used_mask = CPU_BITS_NONE,
+ .used_mask = { 0 },
};
if (!validate_event(event->pmu, &fake_pmu, leader))
diff --git a/drivers/bus/omap_l3_noc.c b/drivers/bus/omap_l3_noc.c
index 11f7982cbdb3..ebee57d715d2 100644
--- a/drivers/bus/omap_l3_noc.c
+++ b/drivers/bus/omap_l3_noc.c
@@ -1,7 +1,7 @@
/*
* OMAP L3 Interconnect error handling driver
*
- * Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2015 Texas Instruments Incorporated - http://www.ti.com/
* Santosh Shilimkar <santosh.shilimkar@ti.com>
* Sricharan <r.sricharan@ti.com>
*
@@ -233,7 +233,8 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
}
static const struct of_device_id l3_noc_match[] = {
- {.compatible = "ti,omap4-l3-noc", .data = &omap_l3_data},
+ {.compatible = "ti,omap4-l3-noc", .data = &omap4_l3_data},
+ {.compatible = "ti,omap5-l3-noc", .data = &omap5_l3_data},
{.compatible = "ti,dra7-l3-noc", .data = &dra_l3_data},
{.compatible = "ti,am4372-l3-noc", .data = &am4372_l3_data},
{},
diff --git a/drivers/bus/omap_l3_noc.h b/drivers/bus/omap_l3_noc.h
index 95254585db86..73431f81da28 100644
--- a/drivers/bus/omap_l3_noc.h
+++ b/drivers/bus/omap_l3_noc.h
@@ -1,7 +1,7 @@
/*
* OMAP L3 Interconnect error handling driver header
*
- * Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2015 Texas Instruments Incorporated - http://www.ti.com/
* Santosh Shilimkar <santosh.shilimkar@ti.com>
* sricharan <r.sricharan@ti.com>
*
@@ -175,16 +175,14 @@ static struct l3_flagmux_data omap_l3_flagmux_clk2 = {
};
-static struct l3_target_data omap_l3_target_data_clk3[] = {
- {0x0100, "EMUSS",},
- {0x0300, "DEBUG SOURCE",},
- {0x0, "HOST CLK3",},
+static struct l3_target_data omap4_l3_target_data_clk3[] = {
+ {0x0100, "DEBUGSS",},
};
-static struct l3_flagmux_data omap_l3_flagmux_clk3 = {
+static struct l3_flagmux_data omap4_l3_flagmux_clk3 = {
.offset = 0x0200,
- .l3_targ = omap_l3_target_data_clk3,
- .num_targ_data = ARRAY_SIZE(omap_l3_target_data_clk3),
+ .l3_targ = omap4_l3_target_data_clk3,
+ .num_targ_data = ARRAY_SIZE(omap4_l3_target_data_clk3),
};
static struct l3_masters_data omap_l3_masters[] = {
@@ -215,21 +213,49 @@ static struct l3_masters_data omap_l3_masters[] = {
{ 0x32, "USBHOSTFS"}
};
-static struct l3_flagmux_data *omap_l3_flagmux[] = {
+static struct l3_flagmux_data *omap4_l3_flagmux[] = {
&omap_l3_flagmux_clk1,
&omap_l3_flagmux_clk2,
- &omap_l3_flagmux_clk3,
+ &omap4_l3_flagmux_clk3,
};
-static const struct omap_l3 omap_l3_data = {
- .l3_flagmux = omap_l3_flagmux,
- .num_modules = ARRAY_SIZE(omap_l3_flagmux),
+static const struct omap_l3 omap4_l3_data = {
+ .l3_flagmux = omap4_l3_flagmux,
+ .num_modules = ARRAY_SIZE(omap4_l3_flagmux),
.l3_masters = omap_l3_masters,
.num_masters = ARRAY_SIZE(omap_l3_masters),
/* The 6 MSBs of register field used to distinguish initiator */
.mst_addr_mask = 0xFC,
};
+/* OMAP5 data */
+static struct l3_target_data omap5_l3_target_data_clk3[] = {
+ {0x0100, "L3INSTR",},
+ {0x0300, "DEBUGSS",},
+ {0x0, "HOSTCLK3",},
+};
+
+static struct l3_flagmux_data omap5_l3_flagmux_clk3 = {
+ .offset = 0x0200,
+ .l3_targ = omap5_l3_target_data_clk3,
+ .num_targ_data = ARRAY_SIZE(omap5_l3_target_data_clk3),
+};
+
+static struct l3_flagmux_data *omap5_l3_flagmux[] = {
+ &omap_l3_flagmux_clk1,
+ &omap_l3_flagmux_clk2,
+ &omap5_l3_flagmux_clk3,
+};
+
+static const struct omap_l3 omap5_l3_data = {
+ .l3_flagmux = omap5_l3_flagmux,
+ .num_modules = ARRAY_SIZE(omap5_l3_flagmux),
+ .l3_masters = omap_l3_masters,
+ .num_masters = ARRAY_SIZE(omap_l3_masters),
+ /* The 6 MSBs of register field used to distinguish initiator */
+ .mst_addr_mask = 0x7E0,
+};
+
/* DRA7 data */
static struct l3_target_data dra_l3_target_data_clk1[] = {
{0x2a00, "AES1",},
@@ -274,7 +300,7 @@ static struct l3_flagmux_data dra_l3_flagmux_clk1 = {
static struct l3_target_data dra_l3_target_data_clk2[] = {
{0x0, "HOST CLK1",},
- {0x0, "HOST CLK2",},
+ {0x800000, "HOST CLK2",},
{0xdead, L3_TARGET_NOT_SUPPORTED,},
{0x3400, "SHA2_2",},
{0x0900, "BB2D",},