summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMiquel Raynal <miquel.raynal@bootlin.com>2021-06-10 10:20:34 +0200
committerKrzysztof Kozlowski <krzysztof.kozlowski@canonical.com>2021-06-10 17:15:16 +0200
commit493db2b05d9217da5889840ee31121856627e3c6 (patch)
treed415650e85c6f4e3f59081b78052a32661203b6a
parentedd84c4256e2a2c756a241728b8c31e14bbed2f7 (diff)
memory: pl353-smc: Let lower level controller drivers handle inits
There is no point in having all these definitions at the SMC bus level, these are extremely tight to the NAND controller driver implementation, are not particularly generic, imply more boilerplate than needed, do not really follow the device model by receiving no argument and some of them are actually buggy. Let's get rid of these right now as there is no current user and keep this driver at a simple level: only the SMC bare initializations. The NAND controller driver which I am going to introduce will take care of redefining properly all these helpers and using them directly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20210610082040.2075611-13-miquel.raynal@bootlin.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
-rw-r--r--drivers/memory/pl353-smc.c294
-rw-r--r--include/linux/pl353-smc.h30
2 files changed, 0 insertions, 324 deletions
diff --git a/drivers/memory/pl353-smc.c b/drivers/memory/pl353-smc.c
index 14720430bf9e..5b57926461a0 100644
--- a/drivers/memory/pl353-smc.c
+++ b/drivers/memory/pl353-smc.c
@@ -8,76 +8,12 @@
*/
#include <linux/clk.h>
-#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/pl353-smc.h>
#include <linux/amba/bus.h>
-/* Register definitions */
-#define PL353_SMC_MEMC_STATUS_OFFS 0 /* Controller status reg, RO */
-#define PL353_SMC_CFG_CLR_OFFS 0xC /* Clear config reg, WO */
-#define PL353_SMC_DIRECT_CMD_OFFS 0x10 /* Direct command reg, WO */
-#define PL353_SMC_SET_CYCLES_OFFS 0x14 /* Set cycles register, WO */
-#define PL353_SMC_SET_OPMODE_OFFS 0x18 /* Set opmode register, WO */
-#define PL353_SMC_ECC_STATUS_OFFS 0x400 /* ECC status register */
-#define PL353_SMC_ECC_MEMCFG_OFFS 0x404 /* ECC mem config reg */
-#define PL353_SMC_ECC_MEMCMD1_OFFS 0x408 /* ECC mem cmd1 reg */
-#define PL353_SMC_ECC_MEMCMD2_OFFS 0x40C /* ECC mem cmd2 reg */
-#define PL353_SMC_ECC_VALUE0_OFFS 0x418 /* ECC value 0 reg */
-
-/* Controller status register specific constants */
-#define PL353_SMC_MEMC_STATUS_RAW_INT_1_SHIFT 6
-
-/* Clear configuration register specific constants */
-#define PL353_SMC_CFG_CLR_INT_CLR_1 0x10
-#define PL353_SMC_CFG_CLR_ECC_INT_DIS_1 0x40
-#define PL353_SMC_CFG_CLR_INT_DIS_1 0x2
-#define PL353_SMC_CFG_CLR_DEFAULT_MASK (PL353_SMC_CFG_CLR_INT_CLR_1 | \
- PL353_SMC_CFG_CLR_ECC_INT_DIS_1 | \
- PL353_SMC_CFG_CLR_INT_DIS_1)
-
-/* Set cycles register specific constants */
-#define PL353_SMC_SET_CYCLES_T0_MASK 0xF
-#define PL353_SMC_SET_CYCLES_T0_SHIFT 0
-#define PL353_SMC_SET_CYCLES_T1_MASK 0xF
-#define PL353_SMC_SET_CYCLES_T1_SHIFT 4
-#define PL353_SMC_SET_CYCLES_T2_MASK 0x7
-#define PL353_SMC_SET_CYCLES_T2_SHIFT 8
-#define PL353_SMC_SET_CYCLES_T3_MASK 0x7
-#define PL353_SMC_SET_CYCLES_T3_SHIFT 11
-#define PL353_SMC_SET_CYCLES_T4_MASK 0x7
-#define PL353_SMC_SET_CYCLES_T4_SHIFT 14
-#define PL353_SMC_SET_CYCLES_T5_MASK 0x7
-#define PL353_SMC_SET_CYCLES_T5_SHIFT 17
-#define PL353_SMC_SET_CYCLES_T6_MASK 0xF
-#define PL353_SMC_SET_CYCLES_T6_SHIFT 20
-
-/* ECC status register specific constants */
-#define PL353_SMC_ECC_STATUS_BUSY BIT(6)
-#define PL353_SMC_ECC_REG_SIZE_OFFS 4
-
-/* ECC memory config register specific constants */
-#define PL353_SMC_ECC_MEMCFG_MODE_MASK 0xC
-#define PL353_SMC_ECC_MEMCFG_MODE_SHIFT 2
-#define PL353_SMC_ECC_MEMCFG_PGSIZE_MASK 0x3
-
-#define PL353_SMC_DC_UPT_NAND_REGS ((4 << 23) | /* CS: NAND chip */ \
- (2 << 21)) /* UpdateRegs operation */
-
-#define PL353_NAND_ECC_CMD1 ((0x80) | /* Write command */ \
- (0 << 8) | /* Read command */ \
- (0x30 << 16) | /* Read End command */ \
- (1 << 24)) /* Read End command calid */
-
-#define PL353_NAND_ECC_CMD2 ((0x85) | /* Write col change cmd */ \
- (5 << 8) | /* Read col change cmd */ \
- (0xE0 << 16) | /* Read col change end cmd */ \
- (1 << 24)) /* Read col change end cmd valid */
-#define PL353_NAND_ECC_BUSY_TIMEOUT (1 * HZ)
/**
* struct pl353_smc_data - Private smc driver structure
* @memclk: Pointer to the peripheral clock
@@ -88,183 +24,6 @@ struct pl353_smc_data {
struct clk *aclk;
};
-/* SMC virtual register base */
-static void __iomem *pl353_smc_base;
-
-/**
- * pl353_smc_set_buswidth - Set memory buswidth
- * @bw: Memory buswidth (8 | 16)
- * Return: 0 on success or negative errno.
- */
-int pl353_smc_set_buswidth(unsigned int bw)
-{
- if (bw != PL353_SMC_MEM_WIDTH_8 && bw != PL353_SMC_MEM_WIDTH_16)
- return -EINVAL;
-
- writel(bw, pl353_smc_base + PL353_SMC_SET_OPMODE_OFFS);
- writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc_base +
- PL353_SMC_DIRECT_CMD_OFFS);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(pl353_smc_set_buswidth);
-
-/**
- * pl353_smc_set_cycles - Set memory timing parameters
- * @timings: NAND controller timing parameters
- *
- * Sets NAND chip specific timing parameters.
- */
-void pl353_smc_set_cycles(u32 timings[])
-{
- /*
- * Set write pulse timing. This one is easy to extract:
- *
- * NWE_PULSE = tWP
- */
- timings[0] &= PL353_SMC_SET_CYCLES_T0_MASK;
- timings[1] = (timings[1] & PL353_SMC_SET_CYCLES_T1_MASK) <<
- PL353_SMC_SET_CYCLES_T1_SHIFT;
- timings[2] = (timings[2] & PL353_SMC_SET_CYCLES_T2_MASK) <<
- PL353_SMC_SET_CYCLES_T2_SHIFT;
- timings[3] = (timings[3] & PL353_SMC_SET_CYCLES_T3_MASK) <<
- PL353_SMC_SET_CYCLES_T3_SHIFT;
- timings[4] = (timings[4] & PL353_SMC_SET_CYCLES_T4_MASK) <<
- PL353_SMC_SET_CYCLES_T4_SHIFT;
- timings[5] = (timings[5] & PL353_SMC_SET_CYCLES_T5_MASK) <<
- PL353_SMC_SET_CYCLES_T5_SHIFT;
- timings[6] = (timings[6] & PL353_SMC_SET_CYCLES_T6_MASK) <<
- PL353_SMC_SET_CYCLES_T6_SHIFT;
- timings[0] |= timings[1] | timings[2] | timings[3] |
- timings[4] | timings[5] | timings[6];
-
- writel(timings[0], pl353_smc_base + PL353_SMC_SET_CYCLES_OFFS);
- writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc_base +
- PL353_SMC_DIRECT_CMD_OFFS);
-}
-EXPORT_SYMBOL_GPL(pl353_smc_set_cycles);
-
-/**
- * pl353_smc_ecc_is_busy - Read ecc busy flag
- * Return: the ecc_status bit from the ecc_status register. 1 = busy, 0 = idle
- */
-bool pl353_smc_ecc_is_busy(void)
-{
- return ((readl(pl353_smc_base + PL353_SMC_ECC_STATUS_OFFS) &
- PL353_SMC_ECC_STATUS_BUSY) == PL353_SMC_ECC_STATUS_BUSY);
-}
-EXPORT_SYMBOL_GPL(pl353_smc_ecc_is_busy);
-
-/**
- * pl353_smc_get_ecc_val - Read ecc_valueN registers
- * @ecc_reg: Index of the ecc_value reg (0..3)
- * Return: the content of the requested ecc_value register.
- *
- * There are four valid ecc_value registers. The argument is truncated to stay
- * within this valid boundary.
- */
-u32 pl353_smc_get_ecc_val(int ecc_reg)
-{
- u32 addr, reg;
-
- addr = PL353_SMC_ECC_VALUE0_OFFS +
- (ecc_reg * PL353_SMC_ECC_REG_SIZE_OFFS);
- reg = readl(pl353_smc_base + addr);
-
- return reg;
-}
-EXPORT_SYMBOL_GPL(pl353_smc_get_ecc_val);
-
-/**
- * pl353_smc_get_nand_int_status_raw - Get NAND interrupt status bit
- * Return: the raw_int_status1 bit from the memc_status register
- */
-int pl353_smc_get_nand_int_status_raw(void)
-{
- u32 reg;
-
- reg = readl(pl353_smc_base + PL353_SMC_MEMC_STATUS_OFFS);
- reg >>= PL353_SMC_MEMC_STATUS_RAW_INT_1_SHIFT;
- reg &= 1;
-
- return reg;
-}
-EXPORT_SYMBOL_GPL(pl353_smc_get_nand_int_status_raw);
-
-/**
- * pl353_smc_clr_nand_int - Clear NAND interrupt
- */
-void pl353_smc_clr_nand_int(void)
-{
- writel(PL353_SMC_CFG_CLR_INT_CLR_1,
- pl353_smc_base + PL353_SMC_CFG_CLR_OFFS);
-}
-EXPORT_SYMBOL_GPL(pl353_smc_clr_nand_int);
-
-/**
- * pl353_smc_set_ecc_mode - Set SMC ECC mode
- * @mode: ECC mode (BYPASS, APB, MEM)
- * Return: 0 on success or negative errno.
- */
-int pl353_smc_set_ecc_mode(enum pl353_smc_ecc_mode mode)
-{
- u32 reg;
- int ret = 0;
-
- switch (mode) {
- case PL353_SMC_ECCMODE_BYPASS:
- case PL353_SMC_ECCMODE_APB:
- case PL353_SMC_ECCMODE_MEM:
-
- reg = readl(pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS);
- reg &= ~PL353_SMC_ECC_MEMCFG_MODE_MASK;
- reg |= mode << PL353_SMC_ECC_MEMCFG_MODE_SHIFT;
- writel(reg, pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS);
-
- break;
- default:
- ret = -EINVAL;
- }
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(pl353_smc_set_ecc_mode);
-
-/**
- * pl353_smc_set_ecc_pg_size - Set SMC ECC page size
- * @pg_sz: ECC page size
- * Return: 0 on success or negative errno.
- */
-int pl353_smc_set_ecc_pg_size(unsigned int pg_sz)
-{
- u32 reg, sz;
-
- switch (pg_sz) {
- case 0:
- sz = 0;
- break;
- case SZ_512:
- sz = 1;
- break;
- case SZ_1K:
- sz = 2;
- break;
- case SZ_2K:
- sz = 3;
- break;
- default:
- return -EINVAL;
- }
-
- reg = readl(pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS);
- reg &= ~PL353_SMC_ECC_MEMCFG_PGSIZE_MASK;
- reg |= sz;
- writel(reg, pl353_smc_base + PL353_SMC_ECC_MEMCFG_OFFS);
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(pl353_smc_set_ecc_pg_size);
-
static int __maybe_unused pl353_smc_suspend(struct device *dev)
{
struct pl353_smc_data *pl353_smc = dev_get_drvdata(dev);
@@ -296,52 +55,15 @@ static int __maybe_unused pl353_smc_resume(struct device *dev)
return ret;
}
-static struct amba_driver pl353_smc_driver;
-
static SIMPLE_DEV_PM_OPS(pl353_smc_dev_pm_ops, pl353_smc_suspend,
pl353_smc_resume);
-/**
- * pl353_smc_init_nand_interface - Initialize the NAND interface
- * @adev: Pointer to the amba_device struct
- * @nand_node: Pointer to the pl353_nand device_node struct
- */
-static void pl353_smc_init_nand_interface(struct amba_device *adev,
- struct device_node *nand_node)
-{
- unsigned long timeout;
-
- pl353_smc_set_buswidth(PL353_SMC_MEM_WIDTH_8);
- writel(PL353_SMC_CFG_CLR_INT_CLR_1,
- pl353_smc_base + PL353_SMC_CFG_CLR_OFFS);
- writel(PL353_SMC_DC_UPT_NAND_REGS, pl353_smc_base +
- PL353_SMC_DIRECT_CMD_OFFS);
-
- timeout = jiffies + PL353_NAND_ECC_BUSY_TIMEOUT;
- /* Wait till the ECC operation is complete */
- do {
- if (pl353_smc_ecc_is_busy())
- cpu_relax();
- else
- break;
- } while (!time_after_eq(jiffies, timeout));
-
- if (time_after_eq(jiffies, timeout))
- return;
-
- writel(PL353_NAND_ECC_CMD1,
- pl353_smc_base + PL353_SMC_ECC_MEMCMD1_OFFS);
- writel(PL353_NAND_ECC_CMD2,
- pl353_smc_base + PL353_SMC_ECC_MEMCMD2_OFFS);
-}
-
static const struct of_device_id pl353_smc_supported_children[] = {
{
.compatible = "cfi-flash"
},
{
.compatible = "arm,pl353-nand-r2p1",
- .data = pl353_smc_init_nand_interface
},
{}
};
@@ -350,23 +72,14 @@ static int pl353_smc_probe(struct amba_device *adev, const struct amba_id *id)
{
struct pl353_smc_data *pl353_smc;
struct device_node *child;
- struct resource *res;
int err;
struct device_node *of_node = adev->dev.of_node;
- static void (*init)(struct amba_device *adev,
- struct device_node *nand_node);
const struct of_device_id *match = NULL;
pl353_smc = devm_kzalloc(&adev->dev, sizeof(*pl353_smc), GFP_KERNEL);
if (!pl353_smc)
return -ENOMEM;
- /* Get the NAND controller virtual address */
- res = &adev->res;
- pl353_smc_base = devm_ioremap_resource(&adev->dev, res);
- if (IS_ERR(pl353_smc_base))
- return PTR_ERR(pl353_smc_base);
-
pl353_smc->aclk = devm_clk_get(&adev->dev, "apb_pclk");
if (IS_ERR(pl353_smc->aclk)) {
dev_err(&adev->dev, "aclk clock not found.\n");
@@ -393,10 +106,6 @@ static int pl353_smc_probe(struct amba_device *adev, const struct amba_id *id)
amba_set_drvdata(adev, pl353_smc);
- /* clear interrupts */
- writel(PL353_SMC_CFG_CLR_DEFAULT_MASK,
- pl353_smc_base + PL353_SMC_CFG_CLR_OFFS);
-
/* Find compatible children. Only a single child is supported */
for_each_available_child_of_node(of_node, child) {
match = of_match_node(pl353_smc_supported_children, child);
@@ -411,9 +120,6 @@ static int pl353_smc_probe(struct amba_device *adev, const struct amba_id *id)
goto disable_mem_clk;
}
- init = match->data;
- if (init)
- init(adev, child);
of_platform_device_create(child, NULL, &adev->dev);
return 0;
diff --git a/include/linux/pl353-smc.h b/include/linux/pl353-smc.h
deleted file mode 100644
index 0e0d3df9bf72..000000000000
--- a/include/linux/pl353-smc.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * ARM PL353 SMC Driver Header
- *
- * Copyright (C) 2012 - 2018 Xilinx, Inc
- */
-
-#ifndef __LINUX_PL353_SMC_H
-#define __LINUX_PL353_SMC_H
-
-enum pl353_smc_ecc_mode {
- PL353_SMC_ECCMODE_BYPASS = 0,
- PL353_SMC_ECCMODE_APB = 1,
- PL353_SMC_ECCMODE_MEM = 2
-};
-
-enum pl353_smc_mem_width {
- PL353_SMC_MEM_WIDTH_8 = 0,
- PL353_SMC_MEM_WIDTH_16 = 1
-};
-
-u32 pl353_smc_get_ecc_val(int ecc_reg);
-bool pl353_smc_ecc_is_busy(void);
-int pl353_smc_get_nand_int_status_raw(void);
-void pl353_smc_clr_nand_int(void);
-int pl353_smc_set_ecc_mode(enum pl353_smc_ecc_mode mode);
-int pl353_smc_set_ecc_pg_size(unsigned int pg_sz);
-int pl353_smc_set_buswidth(unsigned int bw);
-void pl353_smc_set_cycles(u32 timings[]);
-#endif