Merge tag 'soc-fixes-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "This is a fairly large set of bugfixes, most of which had been sent a
  while ago but only now made it into the soc tree:

  Maintainer file updates:

   - Claudiu Beznea now co-maintains the at91 soc family, replacing
     Ludovic Desroches.

   - Michael Walle maintains the sl28cpld drivers

   - Alain Volmat and Raphael Gallais-Pou take over some drivers for ST
     platforms

   - Alim Akhtar is an additional reviewer for Samsung platforms

  Code fixes:

   - Op-tee had a problem with object lifetime that needs a slightly
     complex fix, as well as another bug with error handling.

   - Several minor issues for the OMAP platform, including a regression
     with the timer

   - A Kconfig change to fix a build-time issue on Intel SoCFPGA

  Device tree fixes:

   - The Amlogic Meson platform fixes a boot regression on am1-odroid, a
     spurious interrupt, and a problem with reserved memory regions

   - In the i.MX platform, several bug fixes are needed to make devices
     work correctly: SD card detection, alarmtimer, and sound card on
     some board. One patch for the GPU got in there by accident and gets
     reverted again.

   - TI K3 needs a fix for J721S2 serial port numbers

   - ux500 needs a fix to mount the SD card as root on the Skomer phone"

* tag 'soc-fixes-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (46 commits)
  Revert "arm64: dts: imx8mn-venice-gw7902: disable gpu"
  arm64: Remove ARCH_VULCAN
  MAINTAINERS: add myself as a maintainer for the sl28cpld
  MAINTAINERS: add IRC to ARM sub-architectures and Devicetree
  MAINTAINERS: arm: samsung: add Git tree and IRC
  ARM: dts: Fix boot regression on Skomer
  ARM: dts: spear320: Drop unused and undocumented 'irq-over-gpio' property
  soc: aspeed: lpc-ctrl: Block error printing on probe defer cases
  docs/ABI: testing: aspeed-uart-routing: Escape asterisk
  MAINTAINERS: update drm/stm drm/sti and cec/sti maintainers
  MAINTAINERS: Update Benjamin Gaignard maintainer status
  ARM: socfpga: fix missing RESET_CONTROLLER
  arm64: dts: meson-sm1-odroid: fix boot loop after reboot
  arm64: dts: meson-g12: drop BL32 region from SEI510/SEI610
  arm64: dts: meson-g12: add ATF BL32 reserved-memory region
  arm64: dts: meson-gx: add ATF BL32 reserved-memory region
  arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO domain for GPIOE_2
  arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulator
  arm64: dts: meson-g12b-odroid-n2: fix typo 'dio2133'
  optee: use driver internal tee_context for some rpc
  ...

42 files changed, 263 insertions, 238 deletions

diff --git a/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing b/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing
index b363827da437..910df0e5815a 100644
--- a/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing
+++ b/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing
@@ -1,4 +1,4 @@
-What:		/sys/bus/platform/drivers/aspeed-uart-routing/*/uart*
+What:		/sys/bus/platform/drivers/aspeed-uart-routing/\*/uart\*
 Date:		September 2021
 Contact:	Oskar Senft <osk@google.com>
 		Chia-Wei Wang <chiawei_wang@aspeedtech.com>
@@ -9,7 +9,7 @@ Description:	Selects the RX source of the UARTx device.
 		depends on the selected file.
 
 		e.g.
-		cat /sys/bus/platform/drivers/aspeed-uart-routing/*.uart_routing/uart1
+		cat /sys/bus/platform/drivers/aspeed-uart-routing/\*.uart_routing/uart1
 		[io1] io2 io3 io4 uart2 uart3 uart4 io6
 
 		In this case, UART1 gets its input from IO1 (physical serial port 1).
@@ -17,7 +17,7 @@ Description:	Selects the RX source of the UARTx device.
 Users:		OpenBMC.  Proposed changes should be mailed to
 		openbmc@lists.ozlabs.org
 
-What:		/sys/bus/platform/drivers/aspeed-uart-routing/*/io*
+What:		/sys/bus/platform/drivers/aspeed-uart-routing/\*/io\*
 Date:		September 2021
 Contact:	Oskar Senft <osk@google.com>
 		Chia-Wei Wang <chiawei_wang@aspeedtech.com>
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index e77635c5422c..fa8b31660cad 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -119,6 +119,9 @@ Boards (incomplete list of examples):
 - OMAP3 BeagleBoard : Low cost community board
   compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
 
+- OMAP3 BeagleBoard A to B4 : Early BeagleBoard revisions A to B4 with a timer quirk
+  compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
+
 - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
   compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"
 
diff --git a/MAINTAINERS b/MAINTAINERS
index 35210f09b282..d164cc317b63 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1620,6 +1620,7 @@ M:	Olof Johansson <olof@lixom.net>
 M:	soc@kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+C:	irc://irc.libera.chat/armlinux
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git
 F:	arch/arm/boot/dts/Makefile
 F:	arch/arm64/boot/dts/Makefile
@@ -1627,6 +1628,7 @@ F:	arch/arm64/boot/dts/Makefile
 ARM SUB-ARCHITECTURES
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+C:	irc://irc.libera.chat/armlinux
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git
 F:	arch/arm/mach-*/
 F:	arch/arm/plat-*/
@@ -1780,6 +1782,7 @@ F:	drivers/irqchip/irq-apple-aic.c
 F:	drivers/mailbox/apple-mailbox.c
 F:	drivers/pinctrl/pinctrl-apple-gpio.c
 F:	drivers/soc/apple/*
+F:	drivers/watchdog/apple_wdt.c
 F:	include/dt-bindings/interrupt-controller/apple-aic.h
 F:	include/dt-bindings/pinctrl/apple.h
 F:	include/linux/apple-mailbox.h
@@ -2570,10 +2573,13 @@ N:	rockchip
 
 ARM/SAMSUNG S3C, S5P AND EXYNOS ARM ARCHITECTURES
 M:	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+R:	Alim Akhtar <alim.akhtar@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org
 S:	Maintained
+C:	irc://irc.libera.chat/linux-exynos
 Q:	https://patchwork.kernel.org/project/linux-samsung-soc/list/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux.git
 F:	Documentation/arm/samsung/
 F:	Documentation/devicetree/bindings/arm/samsung/
 F:	Documentation/devicetree/bindings/power/pd-samsung.yaml
@@ -5772,7 +5778,7 @@ F:	tools/testing/selftests/dma/
 
 DMA-BUF HEAPS FRAMEWORK
 M:	Sumit Semwal <sumit.semwal@linaro.org>
-R:	Benjamin Gaignard <benjamin.gaignard@linaro.org>
+R:	Benjamin Gaignard <benjamin.gaignard@collabora.com>
 R:	Liam Mark <lmark@codeaurora.org>
 R:	Laura Abbott <labbott@redhat.com>
 R:	Brian Starkey <Brian.Starkey@arm.com>
@@ -6502,7 +6508,7 @@ F:	Documentation/devicetree/bindings/display/rockchip/
 F:	drivers/gpu/drm/rockchip/
 
 DRM DRIVERS FOR STI
-M:	Benjamin Gaignard <benjamin.gaignard@linaro.org>
+M:	Alain Volmat <alain.volmat@foss.st.com>
 L:	dri-devel@lists.freedesktop.org
 S:	Maintained
 T:	git git://anongit.freedesktop.org/drm/drm-misc
@@ -6511,8 +6517,8 @@ F:	drivers/gpu/drm/sti
 
 DRM DRIVERS FOR STM
 M:	Yannick Fertre <yannick.fertre@foss.st.com>
+M:	Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
 M:	Philippe Cornu <philippe.cornu@foss.st.com>
-M:	Benjamin Gaignard <benjamin.gaignard@linaro.org>
 L:	dri-devel@lists.freedesktop.org
 S:	Maintained
 T:	git git://anongit.freedesktop.org/drm/drm-misc
@@ -14395,6 +14401,7 @@ M:	Rob Herring <robh+dt@kernel.org>
 M:	Frank Rowand <frowand.list@gmail.com>
 L:	devicetree@vger.kernel.org
 S:	Maintained
+C:	irc://irc.libera.chat/devicetree
 W:	http://www.devicetree.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git
 F:	Documentation/ABI/testing/sysfs-firmware-ofw
@@ -14406,6 +14413,7 @@ OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS
 M:	Rob Herring <robh+dt@kernel.org>
 L:	devicetree@vger.kernel.org
 S:	Maintained
+C:	irc://irc.libera.chat/devicetree
 Q:	http://patchwork.ozlabs.org/project/devicetree-bindings/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git
 F:	Documentation/devicetree/
@@ -15296,9 +15304,11 @@ PIN CONTROLLER - SAMSUNG
 M:	Tomasz Figa <tomasz.figa@gmail.com>
 M:	Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
+R:	Alim Akhtar <alim.akhtar@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org
 S:	Maintained
+C:	irc://irc.libera.chat/linux-exynos
 Q:	https://patchwork.kernel.org/project/linux-samsung-soc/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung.git
 F:	Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -17095,6 +17105,7 @@ SAMSUNG SOC CLOCK DRIVERS
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 M:	Tomasz Figa <tomasz.figa@gmail.com>
 M:	Chanwoo Choi <cw00.choi@samsung.com>
+R:	Alim Akhtar <alim.akhtar@samsung.com>
 L:	linux-samsung-soc@vger.kernel.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk.git
@@ -17731,6 +17742,21 @@ S:	Maintained
 W:	http://www.winischhofer.at/linuxsisusbvga.shtml
 F:	drivers/usb/misc/sisusbvga/
 
+SL28 CPLD MFD DRIVER
+M:	Michael Walle <michael@walle.cc>
+S:	Maintained
+F:	Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
+F:	Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
+F:	Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
+F:	Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
+F:	Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
+F:	Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
+F:	drivers/gpio/gpio-sl28cpld.c
+F:	drivers/hwmon/sl28cpld-hwmon.c
+F:	drivers/irqchip/irq-sl28cpld.c
+F:	drivers/pwm/pwm-sl28cpld.c
+F:	drivers/watchdog/sl28cpld_wdt.c
+
 SLAB ALLOCATOR
 M:	Christoph Lameter <cl@linux.com>
 M:	Pekka Enberg <penberg@kernel.org>
@@ -18447,7 +18473,7 @@ F:	Documentation/devicetree/bindings/sound/st,sti-asoc-card.txt
 F:	sound/soc/sti/
 
 STI CEC DRIVER
-M:	Benjamin Gaignard <benjamin.gaignard@linaro.org>
+M:	Alain Volmat <alain.volmat@foss.st.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/media/stih-cec.txt
 F:	drivers/media/cec/platform/sti/
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 235ad559acb2..e41eca79c950 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -806,6 +806,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	logicpd-som-lv-37xx-devkit.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
+	omap3-beagle-ab4.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-beagle-xm-ab.dtb \
 	omap3-cm-t3517.dtb \
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
index 673159d93a6a..f957fea8208e 100644
--- a/arch/arm/boot/dts/am335x-wega.dtsi
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -55,7 +55,7 @@
 		2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */
 	>;
 	tx-num-evt = <16>;
-	rt-num-evt = <16>;
+	rx-num-evt = <16>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 6b485cbed8d5..42bff117656c 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -160,7 +160,7 @@
 		target-module@48210000 {
 			compatible = "ti,sysc-omap4-simple", "ti,sysc";
 			power-domains = <&prm_mpu>;
-			clocks = <&mpu_clkctrl DRA7_MPU_CLKCTRL 0>;
+			clocks = <&mpu_clkctrl DRA7_MPU_MPU_CLKCTRL 0>;
 			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -875,10 +875,10 @@
 			      <0x58000014 4>;
 			reg-names = "rev", "syss";
 			ti,syss-mask = <1>;
-			clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 0>,
-				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
-				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 10>,
-				 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 11>;
+			clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 0>,
+				 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+				 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>,
+				 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 11>;
 			clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -912,7 +912,7 @@
 							 SYSC_OMAP2_SOFTRESET |
 							 SYSC_OMAP2_AUTOIDLE)>;
 					ti,syss-mask = <1>;
-					clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+					clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
 					clock-names = "fck";
 					#address-cells = <1>;
 					#size-cells = <1>;
@@ -939,8 +939,8 @@
 							<SYSC_IDLE_SMART>,
 							<SYSC_IDLE_SMART_WKUP>;
 					ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
-					clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
-						 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
+					clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+						 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
 					clock-names = "fck", "dss_clk";
 					#address-cells = <1>;
 					#size-cells = <1>;
@@ -979,7 +979,7 @@
 				compatible = "vivante,gc";
 				reg = <0x0 0x700>;
 				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&dss_clkctrl DRA7_BB2D_CLKCTRL 0>;
+				clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>;
 				clock-names = "core";
 			};
 		};
@@ -1333,7 +1333,7 @@
 	ti,no-reset-on-init;
 	ti,no-idle;
 	timer@0 {
-		assigned-clocks = <&wkupaon_clkctrl DRA7_TIMER1_CLKCTRL 24>;
+		assigned-clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 24>;
 		assigned-clock-parents = <&sys_32k_ck>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index 8cbaf1c81174..3b609d987d88 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -79,7 +79,6 @@
 						MX23_PAD_LCD_RESET__GPIO_1_18
 						MX23_PAD_PWM3__GPIO_1_29
 						MX23_PAD_PWM4__GPIO_1_30
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 					>;
 					fsl,drive-strength = <MXS_DRIVE_4mA>;
 					fsl,voltage = <MXS_VOLTAGE_HIGH>;
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index d07d8f83456d..ccfa8e320be6 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -5,6 +5,8 @@
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	aliases {
 		backlight = &backlight;
@@ -226,6 +228,7 @@
 				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
 				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
 				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
 			>;
 		};
 
@@ -304,7 +307,7 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	non-removable;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi
index b7ea37ad4e55..bcec98b96411 100644
--- a/arch/arm/boot/dts/imx7ulp.dtsi
+++ b/arch/arm/boot/dts/imx7ulp.dtsi
@@ -259,7 +259,7 @@
 			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
 			assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>;
-			assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
+			assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>;
 			timeout-sec = <40>;
 		};
 
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 3be7cba603d5..26eaba3fa96f 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -59,7 +59,7 @@
 			};
 
 			uart_A: serial@84c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84c0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				fifo-size = <128>;
@@ -67,7 +67,7 @@
 			};
 
 			uart_B: serial@84dc {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x84dc 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -105,7 +105,7 @@
 			};
 
 			uart_C: serial@8700 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart";
 				reg = <0x8700 0x18>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
@@ -228,7 +228,7 @@
 			};
 
 			uart_AO: serial@4c0 {
-				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart";
+				compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart";
 				reg = <0x4c0 0x18>;
 				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index f80ddc98d3a2..9997a5d0333a 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -736,27 +736,27 @@
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index b49b7cbaed4e..94f1c03decce 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -724,27 +724,27 @@
 };
 
 &uart_AO {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart";
+	clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_A {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_B {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
-	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
-	clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>;
-	clock-names = "baud", "xtal", "pclk";
+	compatible = "amlogic,meson8b-uart";
+	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk", "baud";
 };
 
 &usb0 {
diff --git a/arch/arm/boot/dts/omap3-beagle-ab4.dts b/arch/arm/boot/dts/omap3-beagle-ab4.dts
new file mode 100644
index 000000000000..990ff2d84686
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-beagle-ab4.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "omap3-beagle.dts"
+
+/ {
+	model = "TI OMAP3 BeagleBoard A to B4";
+	compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3";
+};
+
+/*
+ * Workaround for capacitor C70 issue, see "Boards revision A and < B5"
+ * section at https://elinux.org/BeagleBoard_Community
+ */
+
+/* Unusable as clocksource because of unreliable oscillator */
+&counter32k {
+	status = "disabled";
+};
+
+/* Unusable as clockevent because of unreliable oscillator, allow to idle */
+&timer1_target {
+	/delete-property/ti,no-reset-on-init;
+	/delete-property/ti,no-idle;
+	timer@0 {
+		/delete-property/ti,timer-alwon;
+	};
+};
+
+/* Preferred always-on timer for clocksource */
+&timer12_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		/* Always clocked by secure_32k_fck */
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&gpt2_fck>;
+		assigned-clock-parents = <&sys_ck>;
+	};
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index f9f34b8458e9..0548b391334f 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -304,39 +304,6 @@
 	phys = <0 &hsusb2_phy>;
 };
 
-/* Unusable as clocksource because of unreliable oscillator */
-&counter32k {
-	status = "disabled";
-};
-
-/* Unusable as clockevent because if unreliable oscillator, allow to idle */
-&timer1_target {
-	/delete-property/ti,no-reset-on-init;
-	/delete-property/ti,no-idle;
-	timer@0 {
-		/delete-property/ti,timer-alwon;
-	};
-};
-
-/* Preferred always-on timer for clocksource */
-&timer12_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		/* Always clocked by secure_32k_fck */
-	};
-};
-
-/* Preferred timer for clockevent */
-&timer2_target {
-	ti,no-reset-on-init;
-	ti,no-idle;
-	timer@0 {
-		assigned-clocks = <&gpt2_fck>;
-		assigned-clock-parents = <&sys_ck>;
-	};
-};
-
 &twl_gpio {
 	ti,use-leds;
 	/* pullups: BIT(1) */
diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts
index 367ba48aac3e..b587e4ec11e5 100644
--- a/arch/arm/boot/dts/spear320-hmi.dts
+++ b/arch/arm/boot/dts/spear320-hmi.dts
@@ -235,7 +235,6 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 					reg = <0x41>;
-					irq-over-gpio;
 					irq-gpios = <&gpiopinctrl 29 0x4>;
 					id = <0>;
 					blocks = <0x5>;
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
index 580ca497f312..f8c5899fbdba 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -185,10 +185,6 @@
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
 			/* All direction control is used */
-			st,sig-dir-cmd;
-			st,sig-dir-dat0;
-			st,sig-dir-dat2;
-			st,sig-dir-dat31;
 			st,sig-pin-fbclk;
 			full-pwr-cycle;
 			vmmc-supply = <&ab8500_ldo_aux3_reg>;
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c
index 6daaa645ae5d..21413a9b7b6c 100644
--- a/arch/arm/mach-omap2/display.c
+++ b/arch/arm/mach-omap2/display.c
@@ -263,9 +263,9 @@ static int __init omapdss_init_of(void)
 	}
 
 	r = of_platform_populate(node, NULL, NULL, &pdev->dev);
+	put_device(&pdev->dev);
 	if (r) {
 		pr_err("Unable to populate DSS submodule devices\n");
-		put_device(&pdev->dev);
 		return r;
 	}
 
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index ccb0e3732c0d..31d1a21f6041 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -752,8 +752,10 @@ static int __init _init_clkctrl_providers(void)
 
 	for_each_matching_node(np, ti_clkctrl_match_table) {
 		ret = _setup_clkctrl_provider(np);
-		if (ret)
+		if (ret) {
+			of_node_put(np);
 			break;
+		}
 	}
 
 	return ret;
diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig
index 43ddec677c0b..594edf9bbea4 100644
--- a/arch/arm/mach-socfpga/Kconfig
+++ b/arch/arm/mach-socfpga/Kconfig
@@ -2,6 +2,7 @@
 menuconfig ARCH_INTEL_SOCFPGA
 	bool "Altera SOCFPGA family"
 	depends on ARCH_MULTI_V7
+	select ARCH_HAS_RESET_CONTROLLER
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
@@ -18,6 +19,7 @@ menuconfig ARCH_INTEL_SOCFPGA
 	select PL310_ERRATA_727915
 	select PL310_ERRATA_753970 if PL310
 	select PL310_ERRATA_769419
+	select RESET_CONTROLLER
 
 if ARCH_INTEL_SOCFPGA
 config SOCFPGA_SUSPEND
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 7d5d58800170..21697449d762 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -309,9 +309,6 @@ config ARCH_VISCONTI
 	help
 	  This enables support for Toshiba Visconti SoCs Family.
 
-config ARCH_VULCAN
-	def_bool n
-
 config ARCH_XGENE
 	bool "AppliedMicro X-Gene SOC Family"
 	help
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index 517519e6e87f..f84d4b489e0b 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -107,6 +107,12 @@
 			no-map;
 		};
 
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
index d8838dde0f0f..4fb31c2ba31c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts
@@ -157,14 +157,6 @@
 		regulator-always-on;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32@5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index 3e968b244191..fd3fa82e4c33 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -17,7 +17,7 @@
 		rtc1 = &vrtc;
 	};
 
-	dioo2133: audio-amplifier-0 {
+	dio2133: audio-amplifier-0 {
 		compatible = "simple-audio-amplifier";
 		enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
 		VCC-supply = <&vcc_5v>;
@@ -219,7 +219,7 @@
 		audio-widgets = "Line", "Lineout";
 		audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>,
 				 <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>,
-				 <&dioo2133>;
+				 <&dio2133>;
 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",
 				"TDMOUT_B IN 2", "FRDDR_C OUT 1",
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 6b457b2c30a4..aa14ea017a61 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -49,6 +49,12 @@
 			no-map;
 		};
 
+		/* 32 MiB reserved for ARM Trusted Firmware (BL32) */
+		secmon_reserved_bl32: secmon@5300000 {
+			reg = <0x0 0x05300000 0x0 0x2000000>;
+			no-map;
+		};
+
 		linux,cma {
 			compatible = "shared-dma-pool";
 			reusable;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
index 212c6aa5a3b8..5751c48620ed 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts
@@ -123,7 +123,7 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 
-		enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-always-on;
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index 0bd1e98a0eef..ddb1b345397f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -48,7 +48,7 @@
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc_5v>;
 
-		enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>;
+		enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
 		enable-active-high;
 		regulator-always-on;
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
index 427475846fc7..a5d79f2f7c19 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
@@ -203,14 +203,6 @@
 		regulator-always-on;
 	};
 
-	reserved-memory {
-		/* TEE Reserved Memory */
-		bl32_reserved: bl32@5000000 {
-			reg = <0x0 0x05300000 0x0 0x2000000>;
-			no-map;
-		};
-	};
-
 	sdio_pwrseq: sdio-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index d74e738e4070..c03f4e183389 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -157,6 +157,10 @@
 	};
 };
 
+&ftm_alarm0 {
+	status = "okay";
+};
+
 &gpio1 {
 	gpio-line-names =
 		"", "", "", "", "", "", "", "",
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index f3e3418f7edc..2d4a472af6a9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -1115,8 +1115,8 @@
 	status = "okay";
 
 	ports {
-		port@1 {
-			reg = <1>;
+		port@0 {
+			reg = <0>;
 
 			mipi1_sensor_ep: endpoint {
 				remote-endpoint = <&camera1_ep>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 2df2510d0118..e92ebb6147e6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -554,7 +554,7 @@
 				assigned-clock-rates = <0>, <0>, <0>, <594000000>;
 				status = "disabled";
 
-				port@0 {
+				port {
 					lcdif_mipi_dsi: endpoint {
 						remote-endpoint = <&mipi_dsi_lcdif_in>;
 					};
@@ -1151,8 +1151,8 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@0 {
-						reg = <0>;
+					port@1 {
+						reg = <1>;
 
 						csi1_mipi_ep: endpoint {
 							remote-endpoint = <&csi1_ep>;
@@ -1203,8 +1203,8 @@
 					#address-cells = <1>;
 					#size-cells = <0>;
 
-					port@0 {
-						reg = <0>;
+					port@1 {
+						reg = <1>;
 
 						csi2_mipi_ep: endpoint {
 							remote-endpoint = <&csi2_ep>;
diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
index f27e3c8de916..ce6d5bdba0a8 100644
--- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi
+++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi
@@ -91,7 +91,7 @@
 
 	sound {
 		compatible = "fsl,imx-audio-tlv320aic32x4";
-		model = "tqm-tlv320aic32";
+		model = "imx-audio-tlv320aic32x4";
 		ssi-controller = <&sai3>;
 		audio-codec = <&tlv320aic3x04>;
 	};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index a5a24f9f46c5..b210cc07c539 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -15,8 +15,18 @@
 	model = "Texas Instruments J721S2 EVM";
 
 	chosen {
-		stdout-path = "serial10:115200n8";
-		bootargs = "console=ttyS10,115200n8 earlycon=ns16550a,mmio32,2880000";
+		stdout-path = "serial2:115200n8";
+		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,2880000";
+	};
+
+	aliases {
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart8;
+		mmc0 = &main_sdhci0;
+		mmc1 = &main_sdhci1;
+		can0 = &main_mcan16;
+		can1 = &mcu_mcan0;
+		can2 = &mcu_mcan1;
 	};
 
 	evm_12v0: fixedregulator-evm12v0 {
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
index 80d3cae03e88..fe5234c40f6c 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi
@@ -21,28 +21,6 @@
 	#address-cells = <2>;
 	#size-cells = <2>;
 
-	aliases {
-		serial0 = &wkup_uart0;
-		serial1 = &mcu_uart0;
-		serial2 = &main_uart0;
-		serial3 = &main_uart1;
-		serial4 = &main_uart2;
-		serial5 = &main_uart3;
-		serial6 = &main_uart4;
-		serial7 = &main_uart5;
-		serial8 = &main_uart6;
-		serial9 = &main_uart7;
-		serial10 = &main_uart8;
-		serial11 = &main_uart9;
-		mmc0 = &main_sdhci0;
-		mmc1 = &main_sdhci1;
-		can0 = &main_mcan16;
-		can1 = &mcu_mcan0;
-		can2 = &mcu_mcan1;
-		can3 = &main_mcan3;
-		can4 = &main_mcan5;
-	};
-
 	chosen { };
 
 	cpus {
diff --git a/drivers/clocksource/timer-ti-dm-systimer.c b/drivers/clocksource/timer-ti-dm-systimer.c
index b6f97960d8ee..5c40ca1d4740 100644
--- a/drivers/clocksource/timer-ti-dm-systimer.c
+++ b/drivers/clocksource/timer-ti-dm-systimer.c
@@ -241,7 +241,7 @@ static void __init dmtimer_systimer_assign_alwon(void)
 	bool quirk_unreliable_oscillator = false;
 
 	/* Quirk unreliable 32 KiHz oscillator with incomplete dts */
-	if (of_machine_is_compatible("ti,omap3-beagle") ||
+	if (of_machine_is_compatible("ti,omap3-beagle-ab4") ||
 	    of_machine_is_compatible("timll,omap3-devkit8000")) {
 		quirk_unreliable_oscillator = true;
 		counter_32k = -ENODEV;
diff --git a/drivers/soc/aspeed/aspeed-lpc-ctrl.c b/drivers/soc/aspeed/aspeed-lpc-ctrl.c
index 72771e018c42..258894ed234b 100644
--- a/drivers/soc/aspeed/aspeed-lpc-ctrl.c
+++ b/drivers/soc/aspeed/aspeed-lpc-ctrl.c
@@ -306,10 +306,9 @@ static int aspeed_lpc_ctrl_probe(struct platform_device *pdev)
 	}
 
 	lpc_ctrl->clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(lpc_ctrl->clk)) {
-		dev_err(dev, "couldn't get clock\n");
-		return PTR_ERR(lpc_ctrl->clk);
-	}
+	if (IS_ERR(lpc_ctrl->clk))
+		return dev_err_probe(dev, PTR_ERR(lpc_ctrl->clk),
+				     "couldn't get clock\n");
 	rc = clk_prepare_enable(lpc_ctrl->clk);
 	if (rc) {
 		dev_err(dev, "couldn't enable clock\n");
diff --git a/drivers/soc/samsung/Kconfig b/drivers/soc/samsung/Kconfig
index a9f8b224322e..02e319508cc6 100644
--- a/drivers/soc/samsung/Kconfig
+++ b/drivers/soc/samsung/Kconfig
@@ -31,7 +31,7 @@ config EXYNOS_USI
 	help
 	  Enable support for USI block. USI (Universal Serial Interface) is an
 	  IP-core found in modern Samsung Exynos SoCs, like Exynos850 and
-	  ExynosAutoV0. USI block can be configured to provide one of the
+	  ExynosAutoV9. USI block can be configured to provide one of the
 	  following serial protocols: UART, SPI or High Speed I2C.
 
 	  This driver allows one to configure USI for desired protocol, which
diff --git a/drivers/tee/optee/core.c b/drivers/tee/optee/core.c
index 1ca320885fad..17a6f51d3089 100644
--- a/drivers/tee/optee/core.c
+++ b/drivers/tee/optee/core.c
@@ -158,6 +158,7 @@ void optee_remove_common(struct optee *optee)
 	optee_unregister_devices();
 
 	optee_notif_uninit(optee);
+	teedev_close_context(optee->ctx);
 	/*
 	 * The two devices have to be unregistered before we can free the
 	 * other resources.
diff --git a/drivers/tee/optee/ffa_abi.c b/drivers/tee/optee/ffa_abi.c
index 20a1b1a3d965..f2bf6c61197f 100644
--- a/drivers/tee/optee/ffa_abi.c
+++ b/drivers/tee/optee/ffa_abi.c
@@ -424,6 +424,7 @@ static struct tee_shm_pool_mgr *optee_ffa_shm_pool_alloc_pages(void)
  */
 
 static void handle_ffa_rpc_func_cmd_shm_alloc(struct tee_context *ctx,
+					      struct optee *optee,
 					      struct optee_msg_arg *arg)
 {
 	struct tee_shm *shm;
@@ -439,7 +440,7 @@ static void handle_ffa_rpc_func_cmd_shm_alloc(struct tee_context *ctx,
 		shm = optee_rpc_cmd_alloc_suppl(ctx, arg->params[0].u.value.b);
 		break;
 	case OPTEE_RPC_SHM_TYPE_KERNEL:
-		shm = tee_shm_alloc(ctx, arg->params[0].u.value.b,
+		shm = tee_shm_alloc(optee->ctx, arg->params[0].u.value.b,
 				    TEE_SHM_MAPPED | TEE_SHM_PRIV);
 		break;
 	default:
@@ -493,14 +494,13 @@ err_bad_param:
 }
 
 static void handle_ffa_rpc_func_cmd(struct tee_context *ctx,
+				    struct optee *optee,
 				    struct optee_msg_arg *arg)
 {
-	struct optee *optee = tee_get_drvdata(ctx->teedev);
-
 	arg->ret_origin = TEEC_ORIGIN_COMMS;
 	switch (arg->cmd) {
 	case OPTEE_RPC_CMD_SHM_ALLOC:
-		handle_ffa_rpc_func_cmd_shm_alloc(ctx, arg);
+		handle_ffa_rpc_func_cmd_shm_alloc(ctx, optee, arg);
 		break;
 	case OPTEE_RPC_CMD_SHM_FREE:
 		handle_ffa_rpc_func_cmd_shm_free(ctx, optee, arg);
@@ -510,12 +510,12 @@ static void handle_ffa_rpc_func_cmd(struct tee_context *ctx,
 	}
 }
 
-static void optee_handle_ffa_rpc(struct tee_context *ctx, u32 cmd,
-				 struct optee_msg_arg *arg)
+static void optee_handle_ffa_rpc(struct tee_context *ctx, struct optee *optee,
+				 u32 cmd, struct optee_msg_arg *arg)
 {
 	switch (cmd) {
 	case OPTEE_FFA_YIELDING_CALL_RETURN_RPC_CMD:
-		handle_ffa_rpc_func_cmd(ctx, arg);
+		handle_ffa_rpc_func_cmd(ctx, optee, arg);
 		break;
 	case OPTEE_FFA_YIELDING_CALL_RETURN_INTERRUPT:
 		/* Interrupt delivered by now */
@@ -582,7 +582,7 @@ static int optee_ffa_yielding_call(struct tee_context *ctx,
 		 * above.
 		 */
 		cond_resched();
-		optee_handle_ffa_rpc(ctx, data->data1, rpc_arg);
+		optee_handle_ffa_rpc(ctx, optee, data->data1, rpc_arg);
 		cmd = OPTEE_FFA_YIELDING_CALL_RESUME;
 		data->data0 = cmd;
 		data->data1 = 0;
@@ -619,9 +619,18 @@ static int optee_ffa_do_call_with_arg(struct tee_context *ctx,
 		.data2 = (u32)(shm->sec_world_id >> 32),
 		.data3 = shm->offset,
 	};
-	struct optee_msg_arg *arg = tee_shm_get_va(shm, 0);
-	unsigned int rpc_arg_offs = OPTEE_MSG_GET_ARG_SIZE(arg->num_params);
-	struct optee_msg_arg *rpc_arg = tee_shm_get_va(shm, rpc_arg_offs);
+	struct optee_msg_arg *arg;
+	unsigned int rpc_arg_offs;
+	struct optee_msg_arg *rpc_arg;
+
+	arg = tee_shm_get_va(shm, 0);
+	if (IS_ERR(arg))
+		return PTR_ERR(arg);
+
+	rpc_arg_offs = OPTEE_MSG_GET_ARG_SIZE(arg->num_params);
+	rpc_arg = tee_shm_get_va(shm, rpc_arg_offs);
+	if (IS_ERR(rpc_arg))
+		return PTR_ERR(rpc_arg);
 
 	return optee_ffa_yielding_call(ctx, &data, rpc_arg);
 }
@@ -793,7 +802,9 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
 {
 	const struct ffa_dev_ops *ffa_ops;
 	unsigned int rpc_arg_count;
+	struct tee_shm_pool *pool;
 	struct tee_device *teedev;
+	struct tee_context *ctx;
 	struct optee *optee;
 	int rc;
 
@@ -813,12 +824,12 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
 	if (!optee)
 		return -ENOMEM;
 
-	optee->pool = optee_ffa_config_dyn_shm();
-	if (IS_ERR(optee->pool)) {
-		rc = PTR_ERR(optee->pool);
-		optee->pool = NULL;
-		goto err;
+	pool = optee_ffa_config_dyn_shm();
+	if (IS_ERR(pool)) {
+		rc = PTR_ERR(pool);
+		goto err_free_optee;
 	}
+	optee->pool = pool;
 
 	optee->ops = &optee_ffa_ops;
 	optee->ffa.ffa_dev = ffa_dev;
@@ -829,7 +840,7 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
 				  optee);
 	if (IS_ERR(teedev)) {
 		rc = PTR_ERR(teedev);
-		goto err;
+		goto err_free_pool;
 	}
 	optee->teedev = teedev;
 
@@ -837,50 +848,57 @@ static int optee_ffa_probe(struct ffa_device *ffa_dev)
 				  optee);
 	if (IS_ERR(teedev)) {
 		rc = PTR_ERR(teedev);
-		goto err;
+		goto err_unreg_teedev;
 	}
 	optee->supp_teedev = teedev;
 
 	rc = tee_device_register(optee->teedev);
 	if (rc)
-		goto err;
+		goto err_unreg_supp_teedev;
 
 	rc = tee_device_register(optee->supp_teedev);
 	if (rc)
-		goto err;
+		goto err_unreg_supp_teedev;
 
 	rc = rhashtable_init(&optee->ffa.global_ids, &shm_rhash_params);
 	if (rc)
-		goto err;
+		goto err_unreg_supp_teedev;
 	mutex_init(&optee->ffa.mutex);
 	mutex_init(&optee->call_queue.mutex);
 	INIT_LIST_HEAD(&optee->call_queue.waiters);
 	optee_supp_init(&optee->supp);
 	ffa_dev_set_drvdata(ffa_dev, optee);
+	ctx = teedev_open(optee->teedev);
+	if (IS_ERR(ctx))
+		goto err_rhashtable_free;
+	optee->ctx = ctx;
 	rc = optee_notif_init(optee, OPTEE_DEFAULT_MAX_NOTIF_VALUE);
-	if (rc) {
-		optee_ffa_remove(ffa_dev);
-		return rc;
-	}
+	if (rc)
+		goto err_close_ctx;
 
 	rc = optee_enumerate_devices(PTA_CMD_GET_DEVICES);
-	if (rc) {
-		optee_ffa_remove(ffa_dev);
-		return rc;
-	}
+	if (rc)
+		goto err_unregister_devices;
 
 	pr_info("initialized driver\n");
 	return 0;
-err:
-	/*
-	 * tee_device_unregister() is safe to call even if the
-	 * devices hasn't been registered with
-	 * tee_device_register() yet.
-	 */
+
+err_unregister_devices:
+	optee_unregister_devices();
+	optee_notif_uninit(optee);
+err_close_ctx:
+	teedev_close_context(ctx);
+err_rhashtable_free:
+	rhashtable_free_and_destroy(&optee->ffa.global_ids, rh_free_fn, NULL);
+	optee_supp_uninit(&optee->supp);
+	mutex_destroy(&optee->call_queue.mutex);
+err_unreg_supp_teedev:
 	tee_device_unregister(optee->supp_teedev);
+err_unreg_teedev:
 	tee_device_unregister(optee->teedev);
-	if (optee->pool)
-		tee_shm_pool_free(optee->pool);
+err_free_pool:
+	tee_shm_pool_free(pool);
+err_free_optee:
 	kfree(optee);
 	return rc;
 }
diff --git a/drivers/tee/optee/notif.c b/drivers/tee/optee/notif.c
index a28fa03dcd0e..05212842b0a5 100644
--- a/drivers/tee/optee/notif.c
+++ b/drivers/tee/optee/notif.c
@@ -121,5 +121,5 @@ int optee_notif_init(struct optee *optee, u_int max_key)
 
 void optee_notif_uninit(struct optee *optee)
 {
-	kfree(optee->notif.bitmap);
+	bitmap_free(optee->notif.bitmap);
 }
diff --git a/drivers/tee/optee/optee_private.h b/drivers/tee/optee/optee_private.h
index 46f74ab07c7e..92bc47bef95f 100644
--- a/drivers/tee/optee/optee_private.h
+++ b/drivers/tee/optee/optee_private.h
@@ -53,7 +53,6 @@ struct optee_call_queue {
 
 struct optee_notif {
 	u_int max_key;
-	struct tee_context *ctx;
 	/* Serializes access to the elements below in this struct */
 	spinlock_t lock;
 	struct list_head db;
@@ -134,9 +133,10 @@ struct optee_ops {
 /**
  * struct optee - main service struct
  * @supp_teedev:	supplicant device
+ * @teedev:		client device
  * @ops:		internal callbacks for different ways to reach secure
  *			world
- * @teedev:		client device
+ * @ctx:		driver internal TEE context
  * @smc:		specific to SMC ABI
  * @ffa:		specific to FF-A ABI
  * @call_queue:		queue of threads waiting to call @invoke_fn
@@ -152,6 +152,7 @@ struct optee {
 	struct tee_device *supp_teedev;
 	struct tee_device *teedev;
 	const struct optee_ops *ops;
+	struct tee_context *ctx;
 	union {
 		struct optee_smc smc;
 		struct optee_ffa ffa;
diff --git a/drivers/tee/optee/smc_abi.c b/drivers/tee/optee/smc_abi.c
index 449d6a72d289..1a55339c7072 100644
--- a/drivers/tee/optee/smc_abi.c
+++ b/drivers/tee/optee/smc_abi.c
@@ -75,16 +75,6 @@ static int from_msg_param_tmp_mem(struct tee_param *p, u32 attr,
 	p->u.memref.shm_offs = mp->u.tmem.buf_ptr - pa;
 	p->u.memref.shm = shm;
 
-	/* Check that the memref is covered by the shm object */
-	if (p->u.memref.size) {
-		size_t o = p->u.memref.shm_offs +
-			   p->u.memref.size - 1;
-
-		rc = tee_shm_get_pa(shm, o, NULL);
-		if (rc)
-			return rc;
-	}
-
 	return 0;
 }
 
@@ -622,6 +612,7 @@ static void handle_rpc_func_cmd_shm_free(struct tee_context *ctx,
 }
 
 static void handle_rpc_func_cmd_shm_alloc(struct tee_context *ctx,
+					  struct optee *optee,
 					  struct optee_msg_arg *arg,
 					  struct optee_call_ctx *call_ctx)
 {
@@ -651,7 +642,8 @@ static void handle_rpc_func_cmd_shm_alloc(struct tee_context *ctx,
 		shm = optee_rpc_cmd_alloc_suppl(ctx, sz);
 		break;
 	case OPTEE_RPC_SHM_TYPE_KERNEL:
-		shm = tee_shm_alloc(ctx, sz, TEE_SHM_MAPPED | TEE_SHM_PRIV);
+		shm = tee_shm_alloc(optee->ctx, sz,
+				    TEE_SHM_MAPPED | TEE_SHM_PRIV);
 		break;
 	default:
 		arg->ret = TEEC_ERROR_BAD_PARAMETERS;
@@ -747,7 +739,7 @@ static void handle_rpc_func_cmd(struct tee_context *ctx, struct optee *optee,
 	switch (arg->cmd) {
 	case OPTEE_RPC_CMD_SHM_ALLOC:
 		free_pages_list(call_ctx);
-		handle_rpc_func_cmd_shm_alloc(ctx, arg, call_ctx);
+		handle_rpc_func_cmd_shm_alloc(ctx, optee, arg, call_ctx);
 		break;
 	case OPTEE_RPC_CMD_SHM_FREE:
 		handle_rpc_func_cmd_shm_free(ctx, arg);
@@ -776,7 +768,7 @@ static void optee_handle_rpc(struct tee_context *ctx,
 
 	switch (OPTEE_SMC_RETURN_GET_RPC_FUNC(param->a0)) {
 	case OPTEE_SMC_RPC_FUNC_ALLOC:
-		shm = tee_shm_alloc(ctx, param->a1,
+		shm = tee_shm_alloc(optee->ctx, param->a1,
 				    TEE_SHM_MAPPED | TEE_SHM_PRIV);
 		if (!IS_ERR(shm) && !tee_shm_get_pa(shm, 0, &pa)) {
 			reg_pair_from_64(&param->a1, &param->a2, pa);
@@ -954,57 +946,34 @@ static irqreturn_t notif_irq_thread_fn(int irq, void *dev_id)
 {
 	struct optee *optee = dev_id;
 
-	optee_smc_do_bottom_half(optee->notif.ctx);
+	optee_smc_do_bottom_half(optee->ctx);
 
 	return IRQ_HANDLED;
 }
 
 static int optee_smc_notif_init_irq(struct optee *optee, u_int irq)
 {
-	struct tee_context *ctx;
 	int rc;
 
-	ctx = teedev_open(optee->teedev);
-	if (IS_ERR(ctx))
-		return PTR_ERR(ctx);
-
-	optee->notif.ctx = ctx;
 	rc = request_threaded_irq(irq, notif_irq_handler,
 				  notif_irq_thread_fn,
 				  0, "optee_notification", optee);
 	if (rc)
-		goto err_close_ctx;
+		return rc;
 
 	optee->smc.notif_irq = irq;
 
 	return 0;
-
-err_close_ctx:
-	teedev_close_context(optee->notif.ctx);
-	optee->notif.ctx = NULL;
-
-	return rc;
 }
 
 static void optee_smc_notif_uninit_irq(struct optee *optee)
 {
-	if (optee->notif.ctx) {
-		optee_smc_stop_async_notif(optee->notif.ctx);
+	if (optee->smc.sec_caps & OPTEE_SMC_SEC_CAP_ASYNC_NOTIF) {
+		optee_smc_stop_async_notif(optee->ctx);
 		if (optee->smc.notif_irq) {
 			free_irq(optee->smc.notif_irq, optee);
 			irq_dispose_mapping(optee->smc.notif_irq);
 		}
-
-		/*
-		 * The thread normally working with optee->notif.ctx was
-		 * stopped with free_irq() above.
-		 *
-		 * Note we're not using teedev_close_context() or
-		 * tee_client_close_context() since we have already called
-		 * tee_device_put() while initializing to avoid a circular
-		 * reference counting.
-		 */
-		teedev_close_context(optee->notif.ctx);
 	}
 }
 
@@ -1366,6 +1335,7 @@ static int optee_probe(struct platform_device *pdev)
 	struct optee *optee = NULL;
 	void *memremaped_shm = NULL;
 	struct tee_device *teedev;
+	struct tee_context *ctx;
 	u32 max_notif_value;
 	u32 sec_caps;
 	int rc;
@@ -1446,9 +1416,13 @@ static int optee_probe(struct platform_device *pdev)
 	optee->pool = pool;
 
 	platform_set_drvdata(pdev, optee);
+	ctx = teedev_open(optee->teedev);
+	if (IS_ERR(ctx))
+		goto err_supp_uninit;
+	optee->ctx = ctx;
 	rc = optee_notif_init(optee, max_notif_value);
 	if (rc)
-		goto err_supp_uninit;
+		goto err_close_ctx;
 
 	if (sec_caps & OPTEE_SMC_SEC_CAP_ASYNC_NOTIF) {
 		unsigned int irq;
@@ -1496,6 +1470,8 @@ err_disable_shm_cache:
 	optee_unregister_devices();
 err_notif_uninit:
 	optee_notif_uninit(optee);
+err_close_ctx:
+	teedev_close_context(ctx);
 err_supp_uninit:
 	optee_supp_uninit(&optee->supp);
 	mutex_destroy(&optee->call_queue.mutex);
diff --git a/include/dt-bindings/clock/dra7.h b/include/dt-bindings/clock/dra7.h
index 7d57063b8a65..29ff6b895848 100644
--- a/include/dt-bindings/clock/dra7.h
+++ b/include/dt-bindings/clock/dra7.h
@@ -84,17 +84,10 @@
 #define DRA7_L3_MAIN_2_CLKCTRL	DRA7_CLKCTRL_INDEX(0x20)
 #define DRA7_L3_INSTR_CLKCTRL	DRA7_CLKCTRL_INDEX(0x28)
 
-/* iva clocks */
-#define DRA7_IVA_CLKCTRL	DRA7_CLKCTRL_INDEX(0x20)
-#define DRA7_SL2IF_CLKCTRL	DRA7_CLKCTRL_INDEX(0x28)
-
 /* dss clocks */
 #define DRA7_DSS_CORE_CLKCTRL	DRA7_CLKCTRL_INDEX(0x20)
 #define DRA7_BB2D_CLKCTRL	DRA7_CLKCTRL_INDEX(0x30)
 
-/* gpu clocks */
-#define DRA7_GPU_CLKCTRL	DRA7_CLKCTRL_INDEX(0x20)
-
 /* l3init clocks */
 #define DRA7_MMC1_CLKCTRL	DRA7_CLKCTRL_INDEX(0x28)
 #define DRA7_MMC2_CLKCTRL	DRA7_CLKCTRL_INDEX(0x30)
@@ -267,10 +260,17 @@
 #define DRA7_L3INSTR_L3_MAIN_2_CLKCTRL	DRA7_CLKCTRL_INDEX(0x20)
 #define DRA7_L3INSTR_L3_INSTR_CLKCTRL	DRA7_CLKCTRL_INDEX(0x28)
 
+/* iva clocks */
+#define DRA7_IVA_CLKCTRL		DRA7_CLKCTRL_INDEX(0x20)
+#define DRA7_SL2IF_CLKCTRL		DRA7_CLKCTRL_INDEX(0x28)
+
 /* dss clocks */
 #define DRA7_DSS_DSS_CORE_CLKCTRL	DRA7_CLKCTRL_INDEX(0x20)
 #define DRA7_DSS_BB2D_CLKCTRL	DRA7_CLKCTRL_INDEX(0x30)
 
+/* gpu clocks */
+#define DRA7_GPU_CLKCTRL		DRA7_CLKCTRL_INDEX(0x20)
+
 /* l3init clocks */
 #define DRA7_L3INIT_MMC1_CLKCTRL	DRA7_CLKCTRL_INDEX(0x28)
 #define DRA7_L3INIT_MMC2_CLKCTRL	DRA7_CLKCTRL_INDEX(0x30)