Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - Remove socket skb caches

   - Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
     avoid memory accounting overhead on each message sent

   - Introduce managed neighbor entries - added by control plane and
     resolved by the kernel for use in acceleration paths (BPF / XDP
     right now, HW offload users will benefit as well)

   - Make neighbor eviction on link down controllable by userspace to
     work around WiFi networks with bad roaming implementations

   - vrf: Rework interaction with netfilter/conntrack

   - fq_codel: implement L4S style ce_threshold_ect1 marking

   - sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()

  BPF:

   - Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
     as implemented in LLVM14

   - Introduce bpf_get_branch_snapshot() to capture Last Branch Records

   - Implement variadic trace_printk helper

   - Add a new Bloomfilter map type

   - Track <8-byte scalar spill and refill

   - Access hw timestamp through BPF's __sk_buff

   - Disallow unprivileged BPF by default

   - Document BPF licensing

  Netfilter:

   - Introduce egress hook for looking at raw outgoing packets

   - Allow matching on and modifying inner headers / payload data

   - Add NFT_META_IFTYPE to match on the interface type either from
     ingress or egress

  Protocols:

   - Multi-Path TCP:
      - increase default max additional subflows to 2
      - rework forward memory allocation
      - add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS

   - MCTP flow support allowing lower layer drivers to configure msg
     muxing as needed

   - Automatic Multicast Tunneling (AMT) driver based on RFC7450

   - HSR support the redbox supervision frames (IEC-62439-3:2018)

   - Support for the ip6ip6 encapsulation of IOAM

   - Netlink interface for CAN-FD's Transmitter Delay Compensation

   - Support SMC-Rv2 eliminating the current same-subnet restriction, by
     exploiting the UDP encapsulation feature of RoCE adapters

   - TLS: add SM4 GCM/CCM crypto support

   - Bluetooth: initial support for link quality and audio/codec offload

  Driver APIs:

   - Add a batched interface for RX buffer allocation in AF_XDP buffer
     pool

   - ethtool: Add ability to control transceiver modules' power mode

   - phy: Introduce supported interfaces bitmap to express MAC
     capabilities and simplify PHY code

   - Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks

  New drivers:

   - WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)

   - Ethernet driver for ASIX AX88796C SPI device (x88796c)

  Drivers:

   - Broadcom PHYs
      - support 72165, 7712 16nm PHYs
      - support IDDQ-SR for additional power savings

   - PHY support for QCA8081, QCA9561 PHYs

   - NXP DPAA2: support for IRQ coalescing

   - NXP Ethernet (enetc): support for software TCP segmentation

   - Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
     Gigabit-capable IP found on RZ/G2L SoC

   - Intel 100G Ethernet
      - support for eswitch offload of TC/OvS flow API, including
        offload of GRE, VxLAN, Geneve tunneling
      - support application device queues - ability to assign Rx and Tx
        queues to application threads
      - PTP and PPS (pulse-per-second) extensions

   - Broadcom Ethernet (bnxt)
      - devlink health reporting and device reload extensions

   - Mellanox Ethernet (mlx5)
      - offload macvlan interfaces
      - support HW offload of TC rules involving OVS internal ports
      - support HW-GRO and header/data split
      - support application device queues

   - Marvell OcteonTx2:
      - add XDP support for PF
      - add PTP support for VF

   - Qualcomm Ethernet switch (qca8k): support for QCA8328

   - Realtek Ethernet DSA switch (rtl8366rb)
      - support bridge offload
      - support STP, fast aging, disabling address learning
      - support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch

   - Mellanox Ethernet/IB switch (mlxsw)
      - multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
      - offload root TBF qdisc as port shaper
      - support multiple routing interface MAC address prefixes
      - support for IP-in-IP with IPv6 underlay

   - MediaTek WiFi (mt76)
      - mt7921 - ASPM, 6GHz, SDIO and testmode support
      - mt7915 - LED and TWT support

   - Qualcomm WiFi (ath11k)
      - include channel rx and tx time in survey dump statistics
      - support for 80P80 and 160 MHz bandwidths
      - support channel 2 in 6 GHz band
      - spectral scan support for QCN9074
      - support for rx decapsulation offload (data frames in 802.3
        format)

   - Qualcomm phone SoC WiFi (wcn36xx)
      - enable Idle Mode Power Save (IMPS) to reduce power consumption
        during idle

   - Bluetooth driver support for MediaTek MT7922 and MT7921

   - Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
     Realtek 8822C/8852A

   - Microsoft vNIC driver (mana)
      - support hibernation and kexec

   - Google vNIC driver (gve)
      - support for jumbo frames
      - implement Rx page reuse

  Refactor:

   - Make all writes to netdev->dev_addr go thru helpers, so that we can
     add this address to the address rbtree and handle the updates

   - Various TCP cleanups and optimizations including improvements to
     CPU cache use

   - Simplify the gnet_stats, Qdisc stats' handling and remove
     qdisc->running sequence counter

   - Driver changes and API updates to address devlink locking
     deficiencies"

* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
  Revert "net: avoid double accounting for pure zerocopy skbs"
  selftests: net: add arp_ndisc_evict_nocarrier
  net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
  net: arp: introduce arp_evict_nocarrier sysctl parameter
  libbpf: Deprecate AF_XDP support
  kbuild: Unify options for BTF generation for vmlinux and modules
  selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
  bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
  bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
  net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
  net: avoid double accounting for pure zerocopy skbs
  tcp: rename sk_wmem_free_skb
  netdevsim: fix uninit value in nsim_drv_configure_vfs()
  selftests/bpf: Fix also no-alu32 strobemeta selftest
  bpf: Add missing map_delete_elem method to bloom filter map
  selftests/bpf: Add bloom map success test for userspace calls
  bpf: Add alignment padding for "map_extra" + consolidate holes
  bpf: Bloom filter map naming fixups
  selftests/bpf: Add test cases for struct_ops prog
  bpf: Add dummy BPF STRUCT_OPS for test purpose
  ...

1 files changed, 174 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-timecard b/Documentation/ABI/testing/sysfs-timecard
new file mode 100644
index 000000000000..97f6773794a5
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-timecard
@@ -0,0 +1,174 @@
+What:		/sys/class/timecard/
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	This directory contains files and directories
+		providing a standardized interface to the ancillary
+		features of the OpenCompute timecard.
+
+What:		/sys/class/timecard/ocpN/
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	This directory contains the attributes of the Nth timecard
+		registered.
+
+What:		/sys/class/timecard/ocpN/available_clock_sources
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RO) The list of available time sources that the PHC
+		uses for clock adjustments.
+
+		====  =================================================
+                NONE  no adjustments
+                PPS   adjustments come from the PPS1 selector (default)
+                TOD   adjustments from the GNSS/TOD module
+                IRIG  adjustments from external IRIG-B signal
+                DCF   adjustments from external DCF signal
+                ====  =================================================
+
+What:		/sys/class/timecard/ocpN/available_sma_inputs
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RO) Set of available destinations (sinks) for a SMA
+		input signal.
+
+                =====  ================================================
+                10Mhz  signal is used as the 10Mhz reference clock
+                PPS1   signal is sent to the PPS1 selector
+                PPS2   signal is sent to the PPS2 selector
+                TS1    signal is sent to timestamper 1
+                TS2    signal is sent to timestamper 2
+                IRIG   signal is sent to the IRIG-B module
+                DCF    signal is sent to the DCF module
+                =====  ================================================
+
+What:		/sys/class/timecard/ocpN/available_sma_outputs
+Date:		May 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RO) Set of available sources for a SMA output signal.
+
+                =====  ================================================
+                10Mhz  output is from the 10Mhz reference clock
+                PHC    output PPS is from the PHC clock
+                MAC    output PPS is from the Miniature Atomic Clock
+                GNSS   output PPS is from the GNSS module
+                GNSS2  output PPS is from the second GNSS module
+                IRIG   output is from the PHC, in IRIG-B format
+                DCF    output is from the PHC, in DCF format
+                =====  ================================================
+
+What:		/sys/class/timecard/ocpN/clock_source
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RW) Contains the current synchronization source used by
+		the PHC.  May be changed by writing one of the listed
+		values from the available_clock_sources attribute set.
+
+What:		/sys/class/timecard/ocpN/gnss_sync
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RO) Indicates whether a valid GNSS signal is received,
+		or when the signal was lost.
+
+What:		/sys/class/timecard/ocpN/i2c
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	This optional attribute links to the associated i2c device.
+
+What:		/sys/class/timecard/ocpN/irig_b_mode
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RW) An integer from 0-7 indicating the timecode format
+		of the IRIG-B output signal: B00<n>
+
+What:		/sys/class/timecard/ocpN/pps
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	This optional attribute links to the associated PPS device.
+
+What:		/sys/class/timecard/ocpN/ptp
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	This attribute links to the associated PTP device.
+
+What:		/sys/class/timecard/ocpN/serialnum
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RO) Provides the serial number of the timecard.
+
+What:		/sys/class/timecard/ocpN/sma1
+What:		/sys/class/timecard/ocpN/sma2
+What:		/sys/class/timecard/ocpN/sma3
+What:		/sys/class/timecard/ocpN/sma4
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RW) These attributes specify the direction of the signal
+		on the associated SMA connectors, and also the signal sink
+		or source.
+
+		The display format of the attribute is a space separated
+		list of signals, prefixed by the input/output direction.
+
+		The signal direction may be changed (if supported) by
+		prefixing the signal list with either "in:" or "out:".
+		If neither prefix is present, then the direction is unchanged.
+
+		The output signal may be changed by writing one of the listed
+		values from the available_sma_outputs attribute set.
+
+		The input destinations may be changed by writing multiple
+		values from the available_sma_inputs attribute set,
+		separated by spaces.  If there are duplicated input
+		destinations between connectors, the lowest numbered SMA
+		connector is given priority.
+
+		Note that not all input combinations may make sense.
+
+		The 10Mhz reference clock input is currently only valid
+		on SMA1 and may not be combined with other destination sinks.
+
+What:		/sys/class/timecard/ocpN/ts_window_adjust
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RW) When retrieving the PHC with the PTP SYS_OFFSET_EXTENDED
+		ioctl, a system timestamp is made before and after the PHC
+		time is retrieved.  The midpoint between the two system
+		timestamps is usually taken to be the SYS time associated
+		with the PHC time.  This estimate may be wrong, as it depends
+		on PCI latencies, and when the PHC time was latched
+
+		The attribute value reduces the end timestamp by the given
+		number of nanoseconds, so the computed midpoint matches the
+		retrieved PHC time.
+
+		The initial value is set based on measured PCI latency and
+		the estimated point where the FPGA latches the PHC time.  This
+		value may be changed by writing an unsigned integer.
+
+What:		/sys/class/timecard/ocpN/ttyGNSS
+What:		/sys/class/timecard/ocpN/ttyGNSS2
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	These optional attributes link to the TTY serial ports
+		associated with the GNSS devices.
+
+What:		/sys/class/timecard/ocpN/ttyMAC
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	This optional attribute links to the TTY serial port
+		associated with the Miniature Atomic Clock.
+
+What:		/sys/class/timecard/ocpN/ttyNMEA
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	This optional attribute links to the TTY serial port
+		which outputs the PHC time in NMEA ZDA format.
+
+What:		/sys/class/timecard/ocpN/utc_tai_offset
+Date:		September 2021
+Contact:	Jonathan Lemon <jonathan.lemon@gmail.com>
+Description:	(RW) The DCF and IRIG output signals are in UTC, while the
+		TimeCard operates on TAI.  This attribute allows setting the
+		offset in seconds, which is added to the TAI timebase for
+		these formats.
+
+		The offset may be changed by writing an unsigned integer.