Merge tag 'iio-for-6.14a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Pull IIO updaate from Jonathan:

IIO: 1st set of new device support, features and cleanup for 6.14

Fairly quiet cycle. Usual mix of new drivers, device support in
existing drivers, features and more general rework and cleanup.
There are a few late breaking or long standing but complex fixes
in here as well.

There is one expected merge conflict due to an upstream fix touching
neighboring code in ti-ads1119. The trivial resolution is the right one with
the result ending up as:

	struct {
		s16 sample;
		aligned_s64 timestamp;
	} scan;

New device support
==================

adi,ad4000
- Add support for many Pulsar ADC devices: AD7685, AD7686, AD7687, AD7688,
  AD7690, AD7691, AD7693, AD7942, AD7946, AD7980, AD7982, AD7983, AD7984,
  AD7988-1 and AD7988-5 ADCs. Generally similar to the AD4000 series
  but with lower sampling rates and no configuration registers.
  Includes addition of timestamp channels.
adi,adis16480
- Add support for ADIS16486, ADIS16487 and ADIS16489 IMUs. Required a few tweaks
  to existing driver and addition of tables.
kionix,kx022a
- Add support for KX134ACR-LBZ accelerometer that is similar to the
  KX132ACR-LBZ but with a wider (+-64G) sensor range.
- Add support for KX134-1211 accelerometer that is similar to the
  KX132-1211 but with a wider (+-16G) sensor range.
nxp,fxls8962af
- Add support for fxls8974cf and fxls8967af accelerometers, Both are
  compatible with fxls8962af but with different device IDs which are used in
  presence checks.
renesas,rzg2l
- Add support for Renesas RZ/GS3 SoC ADCs (various driver refactors
  precede this to allow for chip differences).
rohm,bd79704
- New driver for this 6 channel DAC.
st,mpu6050
- Support he IAM20380 which is effectively a cut down IAM20608 IMU with only
  a gyroscope (no accelerometer).
st,stm-timmer-trigger
- Add support for ADC trigger use case for the STM32MP25 SOC. Do not support
  the counter functionality in this driver as that is handled by the
  counter subsystem.
ti,opt4060
- New driver for this RGBW color sensor.

Driver drop
===========

rohm,bu20008
- Drop as decision was made to not mass produce this light sensor after
  Matti had done all the work to get a driver upstream.

Features
========

adi,ad_sigma_delta library + ad7124
- Allow for GPIO to check interrupt status, enabling this device on
  more platforms that don't obey prior (non general) assumptions on
  how the interrupt chips work.
- Allow variation in reset sequence length allowing chip specific
  optimizations rather than always using worst case.
adi,ad7124
- Add temperature channel support.
adi,ad7173
- Add support calibration modes for this family of ADCs.
adi,adxl345
- Binding update to allow specification of which interrupt line is
  connected (or none).
- Support interrupts and FIFO based data capture.
bosch,bme680
- Add regulators support. Note this required a new binding doc rather than
  use of trivial-devices
- Runtime PM support.
microchip,pac1921
- Add ACPI support including _DSM for shunt value and label.
renesas,rzg2l
- Enable runtime autosuspend.
- Add suspend and resume support.
tyhx,hx9023s
- Add loading of a firmware file used to set defaults for some
  configuration registers.
vishay,veml6030
- Support triggered buffers allowing efficient data capture at
  higher speeds.
- Add regmap cache to reduce access to device.

Cleanup and minor fixes
=======================

cross-tree
- Another batch of conversions to devm_regulator_get_enable_read_voltage()
  helper and related conversions to full devm that this enables.
- Various patches using guard() to allow early returns and simpler
  code flow.
- Various conversions from s64 timestamp __aligned(8) to aligned_s64 type.
  Includes a few cleanups where this unsigned and it should have been
  signed.
- Fix up some missing types for drive-open-drain in dt-binding docs.
core
- Add missing documentation for iio_dmaengine_buffer_setup_ext()
- Add check that all buffers passed to iio_read_channel_ext_info()
  and iio_read_channel_label() are page sized and page aligned.
  Done this way because the callbacks are almost always only used
  to fill sysfs attributes. The check covers the tiny percentage
  of cases where use is made of this data in a consumer driver.
- Mark scan_timestamp memory of struct iio_dev private ensuring no
  drivers change the value which belongs to the IIO core.
documentation
- Various missing ABI docs added.
- ABI docs made to use Y consistently as the wildcard for channel
  number.
- Combine duplicate in_currentY_raw entries in ABI docs.
iio-mux
- Fix alignment of buffers passed to iio_channel_read_ext_info().
adi,ad_sigma_delta library
- Respect keep_cs_asserted flag in read path.
- Close a race condition around irq enabling and disabling.
- Use explicit unsigned int in place of unsigned.
adi,ad6695
- Move dt-binding header under adc sub-directory and fix include path in dt
  example.
adi,ad7124
- Check number of channels in DT doesn't exceed what the driver can handle.
- Check input specified in DT are possible.
- Improved error reporting during probe.
adi,ad7173
- Drop unused structure element.
adi,ad7293
- Ensure power is turned on before resetting.
adi,adxl345
- Some documentation simplification and parameter renames.
- Add a function than unifies handling of power up and power down.
- Add defines to have a complete set of registers defined.
- Add missing \n to end of error messages.
amlogic,meson_saradc
- Simplify handling of the REG11 register access.
awinic,aw96104
- Constify iio_info structure.
bosch,bmp085
- Add to dt-binding to indicate devices support SPI.
bosch,bmp280
- Use sizeof() to replace a somewhat magic 2.
- Rename sleep related variables so the unit is included and use
  fsleep() to replace usleep_range() calls.
bosch,bno055
- Constify struct bin_attribute
capella,cm3232
- Reset device before checking hardware ID inline with suggested flow
  from datasheet.
diolan,dln2
- Simplify zeroing of structure used to gather up data by just
  clearing the whole thing before writing rather than trying to
  clear out he padding after write.
freescale,vf610
- Use devm_ and dev_error_probe() to simplify code and allow dropping
  of explicit remove() callback.
invensense,timestamp library
- Use a cast to remove possibility of integer overflow.
kionix,kx022a
- Increase reset delay a little.
maxim,max1363
- Use a buffer of sufficient size in iio_priv() rather than allocating
  variable sized buffer at use time.
microchip,mcp4725
- Replace of_property_read_bool() with of_property_present() for
  detecting presence of regulator which is obviously not a bool.
nxp,fxls8962af
- Add wakeup-source property to the dt binding to allow these sensors
  to wake the system up from suspend.
- Enable finer grained build when not all bus types need to be supported.
renesas,rzg2l
- Use dev_err_probe(), improving handling of probe errors and simplifying
  code.
- Convert to devm_ based cleanup.
- Remove unnecessary runtime PM complexity as clocks are managed through
  PM domains.
- Switch pm_ptr() removing need for __maybe_unused markings.
- use read_poll_timeout() to replace open coded equivalent.
samsung, ssp_sensors
- Simplify code by always providing timestamp whether or not it
  is enabled.
st,lsm6dsx
- Avoid need to include linux/i3c/master by using i3cdev_to_dev() to
  get to the contained struct device.
st,stm32-timer-trigger
- Check for clk_enable() fails.
vishay,veml6030
- Use new gts-helper functions and fix the _scale attribute to take into
  account changes in gain and integration time.

Various other typo fixes in variable names + documentation and help text.
A few whitespace cleanup patches.

* tag 'iio-for-6.14a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (142 commits)
  iio: iio-mux: kzalloc instead of devm_kzalloc to ensure page alignment
  iio: adc: ad7625: Add ending newlines to error messages
  iio: accel: adxl345: complete the list of defines
  iio: accel: adxl345: add FIFO with watermark events
  iio: accel: adxl345: initialize FIFO delay value for SPI
  iio: accel: adxl345: introduce interrupt handling
  iio: light: veml3235: fix scale to conform to ABI
  iio: gts-helper: add helpers to ease searches of gain_sel and new_gain
  iio: light: veml3235: extend regmap to add cache
  iio: light: veml3235: fix code style
  dt-bindings: iio: accel: adxl345: add interrupt-names
  dt-bindings: iio: accel: adxl345: make interrupts not a required property
  dt-bindings: iio: imu: bmi323: add boolean type for drive-open-drain
  dt-bindings: iio: imu: bmi270: add boolean type for drive-open-drain
  dt-bindings: iio: imu: bmi160: add boolean type for drive-open-drain
  iio: adc: meson: simplify MESON_SAR_ADC_REG11 register access
  iio: adc: meson: use tabs instead of spaces for some REG11 bit fields
  iio: adc: meson: fix voltage reference selection field name typo
  iio: adc: rockchip: correct alignment of timestamp
  iio: imu: inv_icm42600: switch timestamp type from int64_t __aligned(8) to aligned_s64
  ...

3 files changed, 61 insertions, 63 deletions

diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index f83bd6829285..25d366d452a5 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -168,18 +168,6 @@ Description:
 		is required is a consistent labeling.  Units after application
 		of scale and offset are millivolts.
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_supply_raw
-KernelVersion:	3.17
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Raw (unscaled no bias removal etc.) current measurement from
-		channel Y. In special cases where the channel does not
-		correspond to externally available input one of the named
-		versions may be used. The number must always be specified and
-		unique to allow association with event codes. Units after
-		application of scale and offset are milliamps.
-
 What:		/sys/bus/iio/devices/iio:deviceX/in_powerY_raw
 KernelVersion:	4.5
 Contact:	linux-iio@vger.kernel.org
@@ -227,7 +215,7 @@ Description:
 		same scaling as _raw.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_tempY_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_x_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_y_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_ambient_raw
@@ -416,11 +404,11 @@ Contact:	linux-iio@vger.kernel.org
 Description:
 		Scaled humidity measurement in milli percent.
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_X_mean_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_Y_mean_raw
 KernelVersion:	3.5
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Averaged raw measurement from channel X. The number of values
+		Averaged raw measurement from channel Y. The number of values
 		used for averaging is device specific. The converting rules for
 		normal raw values also applies to the averaged raw values.
 
@@ -448,7 +436,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_humidityrelative_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_magn_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_rot_offset
 What:		/sys/bus/iio/devices/iio:deviceX/in_angl_offset
-What:		/sys/bus/iio/devices/iio:deviceX/in_capacitanceX_offset
+What:		/sys/bus/iio/devices/iio:deviceX/in_capacitanceY_offset
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -508,6 +496,9 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_angl_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_x_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_y_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_z_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_red_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_green_scale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_blue_scale
 What:		/sys/bus/iio/devices/iio:deviceX/in_concentration_co2_scale
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
@@ -660,10 +651,10 @@ What:		/sys/.../iio:deviceX/in_magn_scale_available
 What:		/sys/.../iio:deviceX/in_illuminance_scale_available
 What:		/sys/.../iio:deviceX/in_intensity_scale_available
 What:		/sys/.../iio:deviceX/in_proximity_scale_available
-What:		/sys/.../iio:deviceX/in_voltageX_scale_available
+What:		/sys/.../iio:deviceX/in_voltageY_scale_available
 What:		/sys/.../iio:deviceX/in_voltage-voltage_scale_available
-What:		/sys/.../iio:deviceX/out_voltageX_scale_available
-What:		/sys/.../iio:deviceX/out_altvoltageX_scale_available
+What:		/sys/.../iio:deviceX/out_voltageY_scale_available
+What:		/sys/.../iio:deviceX/out_altvoltageY_scale_available
 What:		/sys/.../iio:deviceX/in_capacitance_scale_available
 What:		/sys/.../iio:deviceX/in_pressure_scale_available
 What:		/sys/.../iio:deviceX/in_pressureY_scale_available
@@ -681,6 +672,7 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain
 What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_clear_hardwaregain
+What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance_hardwaregain
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -1562,7 +1554,7 @@ Description:
 		This attribute is used to read the amount of quadrature error
 		present in the device at a given time.
 
-What:		/sys/.../iio:deviceX/in_accelX_power_mode
+What:		/sys/.../iio:deviceX/in_accelY_power_mode
 KernelVersion:	3.11
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -1633,6 +1625,10 @@ What:		/sys/.../iio:deviceX/in_intensityY_uv_raw
 What:		/sys/.../iio:deviceX/in_intensityY_uva_raw
 What:		/sys/.../iio:deviceX/in_intensityY_uvb_raw
 What:		/sys/.../iio:deviceX/in_intensityY_duv_raw
+What:		/sys/.../iio:deviceX/in_intensity_red_raw
+What:		/sys/.../iio:deviceX/in_intensity_green_raw
+What:		/sys/.../iio:deviceX/in_intensity_blue_raw
+What:		/sys/.../iio:deviceX/in_intensity_clear_raw
 KernelVersion:	3.4
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -1691,16 +1687,19 @@ Description:
 		Raw value of rotation from true/magnetic north measured with
 		or without compensation from tilt sensors.
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_currentX_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_currentX_i_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_currentX_q_raw
-KernelVersion:	3.18
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_supply_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_i_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_q_raw
+KernelVersion:	3.17
 Contact:	linux-iio@vger.kernel.org
 Description:
-		Raw current measurement from channel X. Units are in milliamps
+		Raw current measurement from channel Y. Units are in milliamps
 		after application of scale and offset. If no offset or scale is
 		present, output should be considered as processed with the
-		unit in milliamps.
+		unit in milliamps. In special cases where the channel does not
+		correspond to externally available input one of the named
+		versions may be used.
 
 		Channels with 'i' and 'q' modifiers always exist in pairs and both
 		channels refer to the same signal. The 'i' channel contains the in-phase
@@ -1864,9 +1863,9 @@ Description:
 		hardware fifo watermark level.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_calibemissivity
-What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_calibemissivity
+What:		/sys/bus/iio/devices/iio:deviceX/in_tempY_calibemissivity
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_object_calibemissivity
-What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_object_calibemissivity
+What:		/sys/bus/iio/devices/iio:deviceX/in_tempY_object_calibemissivity
 KernelVersion:	4.1
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -1887,17 +1886,17 @@ Description:
 		is considered as one sample for <type>[_name]_sampling_frequency.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_concentration_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationX_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationY_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_concentration_co2_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationX_co2_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationY_co2_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_concentration_ethanol_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationX_ethanol_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationY_ethanol_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_concentration_h2_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationX_h2_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationY_h2_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_concentration_o2_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationX_o2_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationY_o2_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_concentration_voc_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationX_voc_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_concentrationY_voc_raw
 KernelVersion:	4.3
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -1905,9 +1904,9 @@ Description:
 		after application of scale and offset are percents.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_resistance_raw
-What:		/sys/bus/iio/devices/iio:deviceX/in_resistanceX_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_resistanceY_raw
 What:		/sys/bus/iio/devices/iio:deviceX/out_resistance_raw
-What:		/sys/bus/iio/devices/iio:deviceX/out_resistanceX_raw
+What:		/sys/bus/iio/devices/iio:deviceX/out_resistanceY_raw
 KernelVersion:	4.3
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -2096,7 +2095,7 @@ Description:
 		One of the following thermocouple types: B, E, J, K, N, R, S, T.
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_temp_object_calibambient
-What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_object_calibambient
+What:		/sys/bus/iio/devices/iio:deviceX/in_tempY_object_calibambient
 KernelVersion:	5.10
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -2172,9 +2171,9 @@ Description:
 
 		- a range specified as "[min step max]"
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageX_sampling_frequency
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_sampling_frequency
 What:		/sys/bus/iio/devices/iio:deviceX/in_powerY_sampling_frequency
-What:		/sys/bus/iio/devices/iio:deviceX/in_currentZ_sampling_frequency
+What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_sampling_frequency
 KernelVersion:	5.20
 Contact:	linux-iio@vger.kernel.org
 Description:
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad-sigma-delta b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad-sigma-delta
new file mode 100644
index 000000000000..a5a8a579f4f3
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad-sigma-delta
@@ -0,0 +1,23 @@
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_sys_calibration
+KernelVersion: 5.5
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute, if available, initiates the system calibration procedure. This is done on a
+		single channel at a time. Write '1' to start the calibration.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_sys_calibration_mode_available
+KernelVersion: 5.5
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute, if available, returns a list with the possible calibration modes.
+		There are two available options:
+		"zero_scale" - calibrate to zero scale
+		"full_scale" - calibrate to full scale
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_sys_calibration_mode
+KernelVersion: 5.5
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute, if available, sets up the calibration mode used in the system calibration
+		procedure. Reading returns the current calibration mode.
+		Writing sets the system calibration mode.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192 b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192
index f8315202c8f0..28be1cabf112 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192
+++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192
@@ -19,33 +19,9 @@ Description:
 		the bridge can be disconnected (when it is not being used
 		using the bridge_switch_en attribute.
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration
-KernelVersion:
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Initiates the system calibration procedure. This is done on a
-		single channel at a time. Write '1' to start the calibration.
-
 What:		/sys/bus/iio/devices/iio:deviceX/in_voltage2-voltage2_shorted_raw
 KernelVersion:
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Measure voltage from AIN2 pin connected to AIN(+)
 		and AIN(-) shorted.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration_mode_available
-KernelVersion:
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Reading returns a list with the possible calibration modes.
-		There are two available options:
-		"zero_scale" - calibrate to zero scale
-		"full_scale" - calibrate to full scale
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration_mode
-KernelVersion:
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Sets up the calibration mode used in the system calibration
-		procedure. Reading returns the current calibration mode.
-		Writing sets the system calibration mode.