Merge tag 'for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:

 - Add new Qualcomm PMI8998/PM660 SMB2 charger

 - bq256xx: support systems without thermistors

 - cros_pchg: fix peripheral device status after system resume

 - axp20x_usb_power: add support for AXP192

 - qcom-pon: add support for pm8941

 - at91-reset: prepare to expose reset reason to sysfs

 - switch all I2C drivers back to use .probe instead of .probe_new

 - convert some more DT bindings to YAML

 - misc cleanups

* tag 'for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
  MAINTAINERS: add documentation file for Microchip SAMA5D2 shutdown controller
  dt-bindings: power: reset: atmel,sama5d2-shdwc: convert to yaml
  dt-bindings: power: reset: atmel,at91sam9260-shdwc: convert to yaml
  power: reset: at91-reset: change the power on reason prototype
  power: reset: qcom-pon: add support for pm8941-pon
  dt-bindings: power: reset: qcom-pon: define pm8941-pon
  power: supply: add Qualcomm PMI8998 SMB2 Charger driver
  dt-bindings: power: supply: qcom,pmi8998-charger: add bindings for smb2 driver
  power: supply: rt9467: Make charger-enable control as logic level
  power: supply: Switch i2c drivers back to use .probe()
  power: reset: add HAS_IOPORT dependencies
  dt-bindings: power: supply: axp20x: Add AXP192 compatible
  power: supply: axp20x_usb_power: Add support for AXP192
  power: supply: axp20x_usb_power: Remove variant IDs from VBUS polling check
  power: supply: axp20x_usb_power: Use regmap field for VBUS disabling
  power: supply: axp20x_usb_power: Use regmap fields for USB BC feature
  power: supply: axp20x_usb_power: Use regmap fields for VBUS monitor feature
  power: supply: axp20x_usb_power: Simplify USB current limit handling
  power: supply: hwmon: constify pointers to hwmon_channel_info
  power: supply: twl4030_madc_battery: Refactor twl4030_madc_bat_ext_changed()
  ...

1 files changed, 0 insertions, 94 deletions

diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
index ab1b352344ae..67a66bf74895 100644
--- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt
@@ -52,100 +52,6 @@ Example:
 		reg = <0xe3804000 0x1000>;
 };
 
-SHDWC Shutdown Controller
-
-required properties:
-- compatible: Should be "atmel,<chip>-shdwc".
-  <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
-- reg: Should contain registers location and length
-- clocks: phandle to input clock.
-
-optional properties:
-- atmel,wakeup-mode: String, operation mode of the wakeup mode.
-  Supported values are: "none", "high", "low", "any".
-- atmel,wakeup-counter: Counter on Wake-up 0 (between 0x0 and 0xf).
-
-optional at91sam9260 properties:
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-optional at91sam9rl properties:
-- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-optional at91sam9x5 properties:
-- atmel,wakeup-rtc-timer: boolean to enable Real-time Clock Wake-up.
-
-Example:
-
-	shdwc@fffffd10 {
-		compatible = "atmel,at91sam9260-shdwc";
-		reg = <0xfffffd10 0x10>;
-		clocks = <&clk32k>;
-	};
-
-SHDWC SAMA5D2-Compatible Shutdown Controller
-
-1) shdwc node
-
-required properties:
-- compatible: should be "atmel,sama5d2-shdwc", "microchip,sam9x60-shdwc" or
-  "microchip,sama7g5-shdwc"
-- reg: should contain registers location and length
-- clocks: phandle to input clock.
-- #address-cells: should be one. The cell is the wake-up input index.
-- #size-cells: should be zero.
-
-optional properties:
-
-- debounce-delay-us: minimum wake-up inputs debouncer period in
-  microseconds. It's usually a board-related property.
-- atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up.
-
-optional microchip,sam9x60-shdwc or microchip,sama7g5-shdwc properties:
-- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up.
-
-The node contains child nodes for each wake-up input that the platform uses.
-
-2) input nodes
-
-Wake-up input nodes are usually described in the "board" part of the Device
-Tree. Note also that input 0 is linked to the wake-up pin and is frequently
-used.
-
-Required properties:
-- reg: should contain the wake-up input index [0 - 15].
-
-Optional properties:
-- atmel,wakeup-active-high: boolean, the corresponding wake-up input described
-  by the child, forces the wake-up of the core power supply on a high level.
-  The default is to be active low.
-
-Example:
-
-On the SoC side:
-	shdwc@f8048010 {
-		compatible = "atmel,sama5d2-shdwc";
-		reg = <0xf8048010 0x10>;
-		clocks = <&clk32k>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		atmel,wakeup-rtc-timer;
-	};
-
-On the board side:
-	shdwc@f8048010 {
-		debounce-delay-us = <976>;
-
-		input@0 {
-			reg = <0>;
-		};
-
-		input@1 {
-			reg = <1>;
-			atmel,wakeup-active-high;
-		};
-	};
-
 Special Function Registers (SFR)
 
 Special Function Registers (SFR) manage specific aspects of the integrated