Merge tag 'tty-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here are the big set of tty and serial driver changes for 5.18-rc1.

  Nothing major, some more good cleanups from Jiri and 2 new serial
  drivers. Highlights include:

   - termbits cleanups

   - export symbol cleanups and other core cleanups from Jiri Slaby

   - new sunplus and mvebu uart drivers (amazing that people are still
     creating new uarts...)

   - samsung serial driver cleanups

   - ldisc 29 is now "reserved" for experimental/development line
     disciplines

   - lots of other tiny fixes and cleanups to serial drivers and
     bindings

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (104 commits)
  vt_ioctl: fix potential spectre v1 in VT_DISALLOCATE
  serial: 8250: fix XOFF/XON sending when DMA is used
  tty: serial: samsung: Add ARTPEC-8 support
  dt-bindings: serial: samsung: Add ARTPEC-8 UART
  serial: sc16is7xx: Clear RS485 bits in the shutdown
  tty: serial: samsung: simplify getting OF match data
  tty: serial: samsung: constify variables and pointers
  tty: serial: samsung: constify s3c24xx_serial_drv_data members
  tty: serial: samsung: constify UART name
  tty: serial: samsung: constify s3c24xx_serial_drv_data
  tty: serial: samsung: reduce number of casts
  tty: serial: samsung: embed s3c2410_uartcfg in parent structure
  tty: serial: samsung: embed s3c24xx_uart_info in parent structure
  serial: 8250_tegra: mark acpi_device_id as unused with !ACPI
  tty: serial: bcm63xx: use more precise Kconfig symbol
  serial: SERIAL_SUNPLUS should depend on ARCH_SUNPLUS
  tty: serial: jsm: fix two assignments in if conditions
  tty: serial: jsm: remove redundant assignments to variable linestatus
  serial: 8250_mtk: make two read-only arrays static const
  serial: samsung_tty: do not unlock port->lock for uart_write_wakeup()
  ...

1 files changed, 59 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml b/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml
new file mode 100644
index 000000000000..175f5c8f2bc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,armada-3700-uart-clock.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,armada-3700-uart-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Marvell Armada 3720 UART clocks
+
+maintainers:
+  - Pali Rohár <pali@kernel.org>
+
+properties:
+  compatible:
+    const: marvell,armada-3700-uart-clock
+
+  reg:
+    items:
+      - description: UART Clock Control Register
+      - description: UART 2 Baud Rate Divisor Register
+
+  clocks:
+    description: |
+      List of parent clocks suitable for UART from following set:
+        "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal"
+      UART clock can use one from this set and when more are provided
+      then kernel would choose and configure the most suitable one.
+      It is suggest to specify at least one TBG clock to achieve
+      baudrates above 230400 and also to specify clock which bootloader
+      used for UART (most probably xtal) for smooth boot log on UART.
+
+  clock-names:
+    items:
+      - const: TBG-A-P
+      - const: TBG-B-P
+      - const: TBG-A-S
+      - const: TBG-B-S
+      - const: xtal
+    minItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    uartclk: clock-controller@12010 {
+      compatible = "marvell,armada-3700-uart-clock";
+      reg = <0x12010 0x4>, <0x12210 0x4>;
+      clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, <&tbg 3>, <&xtalclk>;
+      clock-names = "TBG-A-P", "TBG-B-P", "TBG-A-S", "TBG-B-S", "xtal";
+      #clock-cells = <1>;
+    };