Merge tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "Highlights:

   - Core DRM had a lot of refactoring around managed drm resources to
     make drivers simpler.

   - Intel Tigerlake support is on by default

   - amdgpu now support p2p PCI buffer sharing and encrypted GPU memory

  Details:

  core:
   - uapi: error out EBUSY when existing master
   - uapi: rework SET/DROP MASTER permission handling
   - remove drm_pci.h
   - drm_pci* are now legacy
   - introduced managed DRM resources
   - subclassing support for drm_framebuffer
   - simple encoder helper
   - edid improvements
   - vblank + writeback documentation improved
   - drm/mm - optimise tree searches
   - port drivers to use devm_drm_dev_alloc

  dma-buf:
   - add flag for p2p buffer support

  mst:
   - ACT timeout improvements
   - remove drm_dp_mst_has_audio
   - don't use 2nd TX slot - spec recommends against it

  bridge:
   - dw-hdmi various improvements
   - chrontel ch7033 support
   - fix stack issues with old gcc

  hdmi:
   - add unpack function for drm infoframe

  fbdev:
   - misc fbdev driver fixes

  i915:
   - uapi: global sseu pinning
   - uapi: OA buffer polling
   - uapi: remove generated perf code
   - uapi: per-engine default property values in sysfs
   - Tigerlake GEN12 enabled.
   - Lots of gem refactoring
   - Tigerlake enablement patches
   - move to drm_device logging
   - Icelake gamma HW readout
   - push MST link retrain to hotplug work
   - bandwidth atomic helpers
   - ICL fixes
   - RPS/GT refactoring
   - Cherryview full-ppgtt support
   - i915 locking guidelines documented
   - require linear fb stride to be 512 multiple on gen9
   - Tigerlake SAGV support

  amdgpu:
   - uapi: encrypted GPU memory handling
   - uapi: add MEM_SYNC IB flag
   - p2p dma-buf support
   - export VRAM dma-bufs
   - FRU chip access support
   - RAS/SR-IOV updates
   - Powerplay locking fixes
   - VCN DPG (powergating) enablement
   - GFX10 clockgating fixes
   - DC fixes
   - GPU reset fixes
   - navi SDMA fix
   - expose FP16 for modesetting
   - DP 1.4 compliance fixes
   - gfx10 soft recovery
   - Improved Critical Thermal Faults handling
   - resizable BAR on gmc10

  amdkfd:
   - uapi: GWS resource management
   - track GPU memory per process
   - report PCI domain in topology

  radeon:
   - safe reg list generator fixes

  nouveau:
   - HD audio fixes on recent systems
   - vGPU detection (fail probe if we're on one, for now)
   - Interlaced mode fixes (mostly avoidance on Turing, which doesn't support it)
   - SVM improvements/fixes
   - NVIDIA format modifier support
   - Misc other fixes.

  adv7511:
   - HDMI SPDIF support

  ast:
   - allocate crtc state size
   - fix double assignment
   - fix suspend

  bochs:
   - drop connector register

  cirrus:
   - move to tiny drivers.

  exynos:
   - fix imported dma-buf mapping
   - enable runtime PM
   - fixes and cleanups

  mediatek:
   - DPI pin mode swap
   - config mipi_tx current/impedance

  lima:
   - devfreq + cooling device support
   - task handling improvements
   - runtime PM support

  pl111:
   - vexpress init improvements
   - fix module auto-load

  rcar-du:
   - DT bindings conversion to YAML
   - Planes zpos sanity check and fix
   - MAINTAINERS entry for LVDS panel driver

  mcde:
   - fix return value

  mgag200:
   - use managed config init

  stm:
   - read endpoints from DT

  vboxvideo:
   - use PCI managed functions
   - drop WC mtrr

  vkms:
   - enable cursor by default

  rockchip:
   - afbc support

  virtio:
   - various cleanups

  qxl:
   - fix cursor notify port

  hisilicon:
   - 128-byte stride alignment fix

  sun4i:
   - improved format handling"

* tag 'drm-next-2020-06-02' of git://anongit.freedesktop.org/drm/drm: (1401 commits)
  drm/amd/display: Fix potential integer wraparound resulting in a hang
  drm/amd/display: drop cursor position check in atomic test
  drm/amdgpu: fix device attribute node create failed with multi gpu
  drm/nouveau: use correct conflicting framebuffer API
  drm/vblank: Fix -Wformat compile warnings on some arches
  drm/amdgpu: Sync with VM root BO when switching VM to CPU update mode
  drm/amd/display: Handle GPU reset for DC block
  drm/amdgpu: add apu flags (v2)
  drm/amd/powerpay: Disable gfxoff when setting manual mode on picasso and raven
  drm/amdgpu: fix pm sysfs node handling (v2)
  drm/amdgpu: move gpu_info parsing after common early init
  drm/amdgpu: move discovery gfx config fetching
  drm/nouveau/dispnv50: fix runtime pm imbalance on error
  drm/nouveau: fix runtime pm imbalance on error
  drm/nouveau: fix runtime pm imbalance on error
  drm/nouveau/debugfs: fix runtime pm imbalance on error
  drm/nouveau/nouveau/hmm: fix migrate zero page to GPU
  drm/nouveau/nouveau/hmm: fix nouveau_dmem_chunk allocations
  drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST
  drm/nouveau/kms/nv50-: Move 8BPC limit for MST into nv50_mstc_get_modes()
  ...

1 files changed, 70 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml
new file mode 100644
index 000000000000..2329d9610f83
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/olimex,lcd-olinuxino.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/olimex,lcd-olinuxino.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for Olimex Ltd. LCD-OLinuXino bridge panel.
+
+maintainers:
+  - Stefan Mavrodiev <stefan@olimex.com>
+
+description: |
+  This device can be used as bridge between a host controller and LCD panels.
+  Currently supported LCDs are:
+    - LCD-OLinuXino-4.3TS
+    - LCD-OLinuXino-5
+    - LCD-OLinuXino-7
+    - LCD-OLinuXino-10
+
+  The panel itself contains:
+    - AT24C16C EEPROM holding panel identification and timing requirements
+    - AR1021 resistive touch screen controller (optional)
+    - FT5x6 capacitive touch screnn controller (optional)
+    - GT911/GT928 capacitive touch screen controller (optional)
+
+  The above chips share same I2C bus. The EEPROM is factory preprogrammed with
+  device information (id, serial, etc.) and timing requirements.
+
+  Touchscreen bingings can be found in these files:
+    - input/touchscreen/goodix.yaml
+    - input/touchscreen/edt-ft5x06.txt
+    - input/touchscreen/ar1021.txt
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: olimex,lcd-olinuxino
+
+  backlight: true
+  enable-gpios: true
+  power-supply: true
+  reg: true
+
+required:
+  - compatible
+  - reg
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@50 {
+            compatible = "olimex,lcd-olinuxino";
+            reg = <0x50>;
+            power-supply = <&reg_vcc5v0>;
+            enable-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>;
+            backlight = <&backlight>;
+        };
+    };
+
+...