Merge tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc into drm-next

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
- DP SDP defines (Ville)
- polish for scdc helpers (Thierry Reding)
- fix lifetimes for connector/plane state across crtc changes (Maarten
  Lankhorst).
- sparse fixes (Ville+Thierry)
- make legacy kms ioctls all interruptible (Maarten)
- push edid override into the edid helpers (out of probe helpers)
  (Jani)
- DP ESI defines for link status (DK)

Driver Changes:
- drm-panel is now in drm-misc!
- minor panel-simple cleanups/refactoring by various folks
- drm_bridge_add cleanup (Inki Dae)
- constify a few i2c_device_id structs (Arvind Yadav)
- More patches from Noralf's fb/gem helper cleanup
- bridge/synopsis: reset fix (Philippe Cornu)
- fix tracepoint include handling in drivers (Thierry)
- rockchip: lvds support (Sandy Huang)
- move sun4i into drm-misc fold (Maxime Ripard)
- sun4i: refactor driver load + support TCON backend/layer muxing
  (Chen-Yu Tsai)
- pl111: support more pl11x variants (Linus Walleij)
- bridge/adv7511: robustify probing/edid handling (Lars-Petersen
  Clausen)

New hw support:
- S6E63J0X03 panel (Hoegeun Kwon)
- OTM8009A panel (Philippe CORNU)
- Seiko 43WVF1G panel (Marco Franchi)
- tve200 driver (Linus Walleij)

Plus assorted of tiny patches all over, including our first outreachy
patches from applicants for the winter round!

* tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc: (101 commits)
  drm: add backwards compatibility support for drm_kms_helper.edid_firmware
  drm: handle override and firmware EDID at drm_do_get_edid() level
  drm/dp: DPCD register defines for link status within ESI field
  drm/rockchip: Replace dev_* with DRM_DEV_*
  drm/tinydrm: Drop driver registered message
  drm/gem-fb-helper: Use debug message on gem lookup failure
  drm/imx: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb()
  drm/bridge: adv7511: Constify HDMI CODEC platform data
  drm/bridge: adv7511: Enable connector polling when no interrupt is specified
  drm/bridge: adv7511: Remove private copy of the EDID
  drm/bridge: adv7511: Properly update EDID when no EDID was found
  drm/crtc: Convert setcrtc ioctl locking to interruptible.
  drm/atomic: Convert pageflip ioctl locking to interruptible.
  drm/legacy: Convert setplane ioctl locking to interruptible.
  drm/legacy: Convert cursor ioctl locking to interruptible.
  drm/atomic: Convert atomic ioctl locking to interruptible.
  drm/atomic: Prepare drm_modeset_lock infrastructure for interruptible waiting, v2.
  drm/tve200: Clean up panel bridging
  drm/doc: Update todo.rst
  drm/dp/mst: Sideband message transaction to power up/down nodes
  ...

5 files changed, 221 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.txt b/Documentation/devicetree/bindings/display/faraday,tve200.txt
new file mode 100644
index 000000000000..82e3bc0b7485
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/faraday,tve200.txt
@@ -0,0 +1,54 @@
+* Faraday TV Encoder TVE200
+
+Required properties:
+
+- compatible: must be one of:
+	"faraday,tve200"
+	"cortina,gemini-tvc", "faraday,tve200"
+
+- reg: base address and size of the control registers block
+
+- interrupts: contains an interrupt specifier for the interrupt
+	line from the TVE200
+
+- clock-names: should contain "PCLK" for the clock line clocking the
+	silicon and "TVE" for the 27MHz clock to the video driver
+
+- clocks: contains phandle and clock specifier pairs for the entries
+	in the clock-names property. See
+	Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Optional properties:
+
+- resets: contains the reset line phandle for the block
+
+Required sub-nodes:
+
+- port: describes LCD panel signals, following the common binding
+	for video transmitter interfaces; see
+	Documentation/devicetree/bindings/media/video-interfaces.txt
+	This port should have the properties:
+	reg = <0>;
+	It should have one endpoint connected to a remote endpoint where
+	the display is connected.
+
+Example:
+
+display-controller@6a000000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "faraday,tve200";
+	reg = <0x6a000000 0x1000>;
+	interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+	resets = <&syscon GEMINI_RESET_TVC>;
+	clocks = <&syscon GEMINI_CLK_GATE_TVC>,
+		 <&syscon GEMINI_CLK_TVC>;
+	clock-names = "PCLK", "TVE";
+
+	port@0 {
+		reg = <0>;
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
new file mode 100644
index 000000000000..6862028e7b2e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt
@@ -0,0 +1,21 @@
+Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode)
+
+The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using
+a MIPI-DSI video interface. Its backlight is managed through the DSI link.
+
+Required properties:
+  - compatible: "orisetech,otm8009a"
+  - reg: the virtual channel number of a DSI peripheral
+
+Optional properties:
+  - reset-gpios: a GPIO spec for the reset pin (active low).
+
+Example:
+&dsi {
+	...
+	panel@0 {
+		compatible = "orisetech,otm8009a";
+		reg = <0>;
+		reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt
new file mode 100644
index 000000000000..3f1a8392af7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt
@@ -0,0 +1,24 @@
+Samsung S6E63J0X03 1.63" 320x320 AMOLED panel (interface: MIPI-DSI command mode)
+
+Required properties:
+  - compatible: "samsung,s6e63j0x03"
+  - reg: the virtual channel number of a DSI peripheral
+  - vdd3-supply: I/O voltage supply
+  - vci-supply: voltage supply for analog circuits
+  - reset-gpios: a GPIO spec for the reset pin (active low)
+  - te-gpios: a GPIO spec for the tearing effect synchronization signal
+    gpio pin (active high)
+
+Example:
+&dsi {
+	...
+
+	panel@0 {
+		compatible = "samsung,s6e63j0x03";
+		reg = <0>;
+		vdd3-supply = <&ldo16_reg>;
+		vci-supply = <&ldo20_reg>;
+		reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
+		te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt
new file mode 100644
index 000000000000..aae57ef36cdd
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt
@@ -0,0 +1,23 @@
+Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel
+
+Required properties:
+- compatible: should be "sii,43wvf1g".
+- "dvdd-supply": 3v3 digital regulator.
+- "avdd-supply": 5v analog regulator.
+
+Optional properties:
+- backlight: phandle for the backlight control.
+
+Example:
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
new file mode 100644
index 000000000000..da6939efdb43
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt
@@ -0,0 +1,99 @@
+Rockchip RK3288 LVDS interface
+================================
+
+Required properties:
+- compatible: matching the soc type, one of
+	- "rockchip,rk3288-lvds";
+
+- reg: physical base address of the controller and length
+	of memory mapped region.
+- clocks: must include clock specifiers corresponding to entries in the
+	clock-names property.
+- clock-names: must contain "pclk_lvds"
+
+- avdd1v0-supply: regulator phandle for 1.0V analog power
+- avdd1v8-supply: regulator phandle for 1.8V analog power
+- avdd3v3-supply: regulator phandle for 3.3V analog power
+
+- rockchip,grf: phandle to the general register files syscon
+- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface
+
+Optional properties:
+- pinctrl-names: must contain a "lcdc" entry.
+- pinctrl-0: pin control group to be used for this controller.
+
+Required nodes:
+
+The lvds has two video ports as described by
+	Documentation/devicetree/bindings/media/video-interfaces.txt
+Their connections are modeled using the OF graph bindings specified in
+	Documentation/devicetree/bindings/graph.txt.
+
+- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl
+- video port 1 for either a panel or subsequent encoder
+
+the lvds panel described by
+	Documentation/devicetree/bindings/display/panel/simple-panel.txt
+
+Panel required properties:
+- ports for remote LVDS output
+
+Panel optional properties:
+- data-mapping: should be "vesa-24","jeida-24" or "jeida-18".
+This describes decribed by:
+	Documentation/devicetree/bindings/display/panel/panel-lvds.txt
+
+Example:
+
+lvds_panel: lvds-panel {
+	compatible = "auo,b101ean01";
+	enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>;
+	data-mapping = "jeida-24";
+
+	ports {
+		panel_in_lvds: endpoint {
+			remote-endpoint = <&lvds_out_panel>;
+		};
+	};
+};
+
+For Rockchip RK3288:
+
+	lvds: lvds@ff96c000 {
+		compatible = "rockchip,rk3288-lvds";
+		rockchip,grf = <&grf>;
+		reg = <0xff96c000 0x4000>;
+		clocks = <&cru PCLK_LVDS_PHY>;
+		clock-names = "pclk_lvds";
+		pinctrl-names = "lcdc";
+		pinctrl-0 = <&lcdc_ctl>;
+		avdd1v0-supply = <&vdd10_lcd>;
+		avdd1v8-supply = <&vcc18_lcd>;
+		avdd3v3-supply = <&vcca_33>;
+		rockchip,output = "rgb";
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			lvds_in: port@0 {
+				reg = <0>;
+
+				lvds_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_lvds>;
+				};
+				lvds_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_lvds>;
+				};
+			};
+
+			lvds_out: port@1 {
+				reg = <1>;
+
+				lvds_out_panel: endpoint {
+					remote-endpoint = <&panel_in_lvds>;
+				};
+			};
+		};
+	};