summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/gpio/gpio.txt
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2015-10-30 11:58:28 +0100
committerLinus Walleij <linus.walleij@linaro.org>2015-10-31 22:12:32 +0100
commitaacaffd1d9a6f8e2c7369d83c21d41c3b53e2edc (patch)
tree6850c2ee20252a3de77344903f5c5de58fb41afe /Documentation/devicetree/bindings/gpio/gpio.txt
parentaad7a2119965a4a504ddf1d8374968135e9a8780 (diff)
gpio: dt-bindings: document the official use of "ngpios"
There are a bunch of drivers that utilize the "ngpios" DT property without any vendor prefix. Try to start cleaning up the mess by defining what we mean by this property. Cc: devicetree@vger.kernel.org Cc: Pramod Kumar <pramodku@broadcom.com> Cc: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'Documentation/devicetree/bindings/gpio/gpio.txt')
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio.txt24
1 files changed, 24 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio.txt b/Documentation/devicetree/bindings/gpio/gpio.txt
index 63b1b9039ce8..e9c49dc4e895 100644
--- a/Documentation/devicetree/bindings/gpio/gpio.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio.txt
@@ -129,6 +129,30 @@ Every GPIO controller node must contain both an empty "gpio-controller"
property, and a #gpio-cells integer property, which indicates the number of
cells in a gpio-specifier.
+Optionally, a GPIO controller may have a "ngpios" property. This property
+indicates the number of in-use slots of available slots for GPIOs. The
+typical example is something like this: the hardware register is 32 bits
+wide, but only 18 of the bits have a physical counterpart. The driver is
+generally written so that all 32 bits can be used, but the IP block is reused
+in a lot of designs, some using all 32 bits, some using 18 and some using
+12. In this case, setting "ngpios = <18>;" informs the driver that only the
+first 18 GPIOs, at local offset 0 .. 17, are in use.
+
+If these GPIOs do not happen to be the first N GPIOs at offset 0...N-1, an
+additional bitmask is needed to specify which GPIOs are actually in use,
+and which are dummies. The bindings for this case has not yet been
+specified, but should be specified if/when such hardware appears.
+
+Example:
+
+gpio-controller@00000000 {
+ compatible = "foo";
+ reg = <0x00000000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <18>;
+}
+
The GPIO chip may contain GPIO hog definitions. GPIO hogging is a mechanism
providing automatic GPIO request and configuration as part of the
gpio-controller's driver probe function.