pinctrl: Add SX150X GPIO Extender Pinctrl Driver

Since the I2C sx150x GPIO expander driver uses platform_data to manage
the pins configurations, rewrite the driver as a pinctrl driver using
pinconf to get/set pin configurations from DT or debugfs.

The pinctrl driver is functionnally equivalent as the gpio-only driver
and can use DT for pinconf. The platform_data confirmation is dropped.

This patchset removed the gpio-only driver and selects the Pinctrl driver
config instead. This patchset also migrates the gpio dt-bindings to pinctrl
and add the pinctrl optional properties.

The driver was tested with a SX1509 device on a BeagleBone black with
interrupt support and on an X86_64 machine over an I2C to USB converter.

This is a fixed version that builds and runs on non-OF platforms and on
arm based OF. The GPIO version is removed and the bindings are also moved
to the pinctrl bindings.

Changes since v2
 - rebased on v4.9-rc1
 - removed MODULE_DEVICE_TABLE as in upstream bb411e771b0e
   ("gpio: sx150x: fix implicit assumption module.h is present")

Changes since v1
 - Fix Kconfig descriptions on pinctrl and gpio
 - Fix Kconfig dependency
 - Remove oscio support for non-789 devices
 - correct typo in dt bindings
 - remove probe reset for non-789 devices

Changes since RFC
 - Put #ifdef CONFIG_OF/CONFIG_OF_GPIO to remove OF code for non-of platforms
 - No more rely on OF_GPIO config
 - Moved and enhanced bindings to pinctrl bindings
 - Removed gpio-sx150x.c
 - Temporary select PINCTRL_SX150X when GPIO_SX150X
 - Temporary mark GPIO_SX150X as deprecated

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Peter Rosin <peda@axentia.se>
Acked-by: Rob Herring <robh@kernel.org>
ested-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 0 insertions, 41 deletions

diff --git a/Documentation/devicetree/bindings/gpio/gpio-sx150x.txt b/Documentation/devicetree/bindings/gpio/gpio-sx150x.txt
deleted file mode 100644
index c809acb9c71b..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-sx150x.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-SEMTECH SX150x GPIO expander bindings
-
-
-Required properties:
-
-- compatible: should be "semtech,sx1506q",
-			"semtech,sx1508q",
-			"semtech,sx1509q",
-			"semtech,sx1502q".
-
-- reg: The I2C slave address for this device.
-
-- interrupt-parent: phandle of the parent interrupt controller.
-
-- interrupts: Interrupt specifier for the controllers interrupt.
-
-- #gpio-cells: Should be 2. The first cell is the GPIO number and the
-		second cell is used to specify optional parameters:
-		bit 0: polarity (0: normal, 1: inverted)
-
-- gpio-controller: Marks the device as a GPIO controller.
-
-- interrupt-controller: Marks the device as a interrupt controller.
-
-The GPIO expander can optionally be used as an interrupt controller, in
-which case it uses the default two cell specifier as described in
-Documentation/devicetree/bindings/interrupt-controller/interrupts.txt.
-
-Example:
-
-	i2c_gpio_expander@20{
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		compatible = "semtech,sx1506q";
-		reg = <0x20>;
-		interrupt-parent = <&gpio_1>;
-		interrupts = <16 0>;
-
-		gpio-controller;
-		interrupt-controller;
-	};