diff options
| author | Daniel Vetter <daniel.vetter@ffwll.ch> | 2017-10-03 11:09:16 +0200 |
|---|---|---|
| committer | Daniel Vetter <daniel.vetter@ffwll.ch> | 2017-10-03 11:09:16 +0200 |
| commit | 0d3c24e936feefeca854073ccb40613cd6eba9a9 (patch) | |
| tree | 1f675397b924846740b0931b066ddce6f3d7eb3d /Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | |
| parent | 1af0838de60e723cb02253ecc9b555c30f8f6a6f (diff) | |
| parent | ebec44a2456fbe5fe18aae88f6010f6878f0cb4a (diff) | |
Merge airlied/drm-next into drm-misc-next
Just catching up with upstream.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Diffstat (limited to 'Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt index 6f28ff55f3ec..1ff1af799c76 100644 --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt @@ -11,6 +11,14 @@ Required properties: Optional properties: - st,drdy-int-pin: the pin on the package that will be used to signal "data ready" (valid values: 1 or 2). +- drive-open-drain: the interrupt/data ready line will be configured + as open drain, which is useful if several sensors share the same + interrupt line. This is a boolean property. + (This binding is taken from pinctrl/pinctrl-bindings.txt) + If the requested interrupt is configured as IRQ_TYPE_LEVEL_HIGH or + IRQ_TYPE_EDGE_RISING a pull-down resistor is needed to drive the line + when it is not active, whereas a pull-up one is needed when interrupt + line is configured as IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_EDGE_FALLING. - interrupt-parent: should be the phandle for the interrupt controller - interrupts: interrupt mapping for IRQ. It should be configured with flags IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or |