Merge tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver subsystem updates from Greg KH:
 "Here is the large set of driver changes for char/misc drivers and
  other smaller driver subsystems that flow through this git tree.

  Included in here are:

   - New IIO drivers and features and improvments in that subsystem

   - New hwtracing drivers and additions to that subsystem

   - lots of interconnect changes and new drivers as that subsystem
     seems under very active development recently. This required also
     merging in the icc subsystem changes through this tree.

   - FPGA driver updates

   - counter subsystem and driver updates

   - MHI driver updates

   - nvmem driver updates

   - documentation updates

   - Other smaller driver updates and fixes, full details in the
     shortlog

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits)
  scripts/tags.sh: fix incompatibility with PCRE2
  firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries
  mei: lower the log level for non-fatal failed messages
  mei: bus: disallow driver match while dismantling device
  misc: vmw_balloon: fix memory leak with using debugfs_lookup()
  nvmem: stm32: fix OPTEE dependency
  dt-bindings: nvmem: qfprom: add IPQ8074 compatible
  nvmem: qcom-spmi-sdam: register at device init time
  nvmem: rave-sp-eeprm: fix kernel-doc bad line warning
  nvmem: stm32: detect bsec pta presence for STM32MP15x
  nvmem: stm32: add OP-TEE support for STM32MP13x
  nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of()
  nvmem: core: add nvmem_add_one_cell()
  nvmem: core: drop the removal of the cells in nvmem_add_cells()
  nvmem: core: move struct nvmem_cell_info to nvmem-provider.h
  nvmem: core: add an index parameter to the cell
  of: property: add #nvmem-cell-cells property
  of: property: make #.*-cells optional for simple props
  of: base: add of_parse_phandle_with_optional_args()
  net: add helper eth_addr_add()
  ...

1 files changed, 75 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml b/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml
new file mode 100644
index 000000000000..121d540b7b6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/magnetometer/ti,tmag5273.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor
+
+maintainers:
+  - Gerald Loacker <gerald.loacker@wolfvision.net>
+
+description:
+  The TI TMAG5273 is a low-power linear 3D Hall-effect sensor. This device
+  integrates three independent Hall-effect sensors in the X, Y, and Z axes.
+  The device has an integrated temperature sensor available. The TMAG5273
+  can be configured through the I2C interface to enable any combination of
+  magnetic axes and temperature measurements. An integrated angle calculation
+  engine (CORDIC) provides full 360° angular position information for both
+  on-axis and off-axis angle measurement topologies. The angle calculation is
+  performed using two user-selected magnetic axes.
+
+properties:
+  compatible:
+    const: ti,tmag5273
+
+  reg:
+    maxItems: 1
+
+  "#io-channel-cells":
+    const: 1
+
+  ti,angle-measurement:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Enables angle measurement in the selected plane.
+      If not specified, "x-y" will be anables as default.
+    enum:
+      - off
+      - x-y
+      - y-z
+      - x-z
+
+  vcc-supply:
+    description:
+      A regulator providing 1.7 V to 3.6 V supply voltage on the VCC pin,
+      typically 3.3 V.
+
+  interrupts:
+    description:
+      The low active interrupt can be configured to be fixed width or latched.
+      Interrupt events can be configured to be generated from magnetic
+      thresholds or when a conversion is completed.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        magnetometer@35 {
+            compatible = "ti,tmag5273";
+            reg = <0x35>;
+            #io-channel-cells = <1>;
+            ti,angle-measurement = "x-z";
+            vcc-supply = <&vcc3v3>;
+        };
+    };
+...