summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/input
diff options
context:
space:
mode:
authorKrzysztof Kozlowski <krzysztof.kozlowski@linaro.org>2023-07-28 18:50:54 +0200
committerRob Herring <robh@kernel.org>2023-08-23 14:35:45 -0500
commit3b44738effaba9a160ef21e09d6d09660d963c49 (patch)
tree5ea70095eb589bb00ac0618c5a9d5a81bcdd96b2 /Documentation/devicetree/bindings/input
parente6e214b7e6330165d44feb8e54676e428904cd86 (diff)
dt-bindings: input: convert syna,rmi4 to DT schema
Convert the bindings for Synaptics RMI4 bus and devices to DT schema. Changes during conversion: 1. Add reset-gpios already used in DTS and mentioned by RMI4 specification. 2. Do not require address/size cells, because without functions (children) they aren't really needed. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230728165054.88678-1-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring <robh@kernel.org>
Diffstat (limited to 'Documentation/devicetree/bindings/input')
-rw-r--r--Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt56
-rw-r--r--Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt39
-rw-r--r--Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt61
-rw-r--r--Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt56
-rw-r--r--Documentation/devicetree/bindings/input/syna,rmi4.yaml271
5 files changed, 271 insertions, 212 deletions
diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
deleted file mode 100644
index 3d5348305239..000000000000
--- a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Synaptics RMI4 2D Sensor Device Binding
-
-The Synaptics RMI4 core is able to support RMI4 devices using different
-transports and different functions. This file describes the device tree
-bindings for devices which contain 2D sensors using Function 11 or
-Function 12. Complete documentation for transports and other functions
-can be found in:
-Documentation/devicetree/bindings/input/rmi4.
-
-RMI4 Function 11 and Function 12 are for 2D touch position sensing.
-Additional documentation for F11 can be found at:
-http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf
-
-Optional Touch Properties:
-Description in Documentation/devicetree/bindings/input/touchscreen
-- touchscreen-inverted-x
-- touchscreen-inverted-y
-- touchscreen-swapped-x-y
-- touchscreen-x-mm
-- touchscreen-y-mm
-
-Optional Properties:
-- syna,clip-x-low: Sets a minimum value for X.
-- syna,clip-y-low: Sets a minimum value for Y.
-- syna,clip-x-high: Sets a maximum value for X.
-- syna,clip-y-high: Sets a maximum value for Y.
-- syna,offset-x: Add an offset to X.
-- syna,offset-y: Add an offset to Y.
-- syna,delta-x-threshold: Set the minimum distance on the X axis required
- to generate an interrupt in reduced reporting
- mode.
-- syna,delta-y-threshold: Set the minimum distance on the Y axis required
- to generate an interrupt in reduced reporting
- mode.
-- syna,sensor-type: Set the sensor type. 1 for touchscreen 2 for touchpad.
-- syna,disable-report-mask: Mask for disabling posiiton reporting. Used to
- disable reporting absolute position data.
-- syna,rezero-wait-ms: Time in milliseconds to wait after issuing a rezero
- command.
-
-
-Example of a RMI4 I2C device with F11:
-Example:
- &i2c1 {
- rmi4-i2c-dev@2c {
- compatible = "syna,rmi4-i2c";
-
- ...
-
- rmi4-f11@11 {
- reg = <0x11>;
- touchscreen-inverted-y;
- syna,sensor-type = <2>;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt
deleted file mode 100644
index 079cad2b6843..000000000000
--- a/Documentation/devicetree/bindings/input/rmi4/rmi_f01.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Synaptics RMI4 F01 Device Binding
-
-The Synaptics RMI4 core is able to support RMI4 devices using different
-transports and different functions. This file describes the device tree
-bindings for devices which contain Function 1. Complete documentation
-for transports and other functions can be found in:
-Documentation/devicetree/bindings/input/rmi4.
-
-Additional documentation for F01 can be found at:
-http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf
-
-Optional Properties:
-- syna,nosleep-mode: If set the device will run at full power without sleeping.
- nosleep has 3 modes, 0 will not change the default
- setting, 1 will disable nosleep (allow sleeping),
- and 2 will enable nosleep (disabling sleep).
-- syna,wakeup-threshold: Defines the amplitude of the disturbance to the
- background capacitance that will cause the
- device to wake from dozing.
-- syna,doze-holdoff-ms: The delay to wait after the last finger lift and the
- first doze cycle.
-- syna,doze-interval-ms: The time period that the device sleeps between finger
- activity.
-
-
-Example of a RMI4 I2C device with F01:
- Example:
- &i2c1 {
- rmi4-i2c-dev@2c {
- compatible = "syna,rmi4-i2c";
-
- ...
-
- rmi4-f01@1 {
- reg = <0x1>;
- syna,nosleep-mode = <1>;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
deleted file mode 100644
index dcb012f5b3ee..000000000000
--- a/Documentation/devicetree/bindings/input/rmi4/rmi_i2c.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-Synaptics RMI4 I2C Device Binding
-
-The Synaptics RMI4 core is able to support RMI4 devices using different
-transports and different functions. This file describes the device tree
-bindings for devices using the I2C transport driver. Complete documentation
-for other transports and functions can be found in
-Documentation/devicetree/bindings/input/rmi4.
-
-Required Properties:
-- compatible: syna,rmi4-i2c
-- reg: I2C address
-- #address-cells: Set to 1 to indicate that the function child nodes
- consist of only on uint32 value.
-- #size-cells: Set to 0 to indicate that the function child nodes do not
- have a size property.
-
-Optional Properties:
-- interrupts: interrupt which the rmi device is connected to.
-See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-- syna,reset-delay-ms: The number of milliseconds to wait after resetting the
- device.
-
-- syna,startup-delay-ms: The number of milliseconds to wait after powering on
- the device.
-
-- vdd-supply: VDD power supply.
-See ../regulator/regulator.txt
-
-- vio-supply: VIO power supply
-See ../regulator/regulator.txt
-
-Function Parameters:
-Parameters specific to RMI functions are contained in child nodes of the rmi device
- node. Documentation for the parameters of each function can be found in:
-Documentation/devicetree/bindings/input/rmi4/rmi_f*.txt.
-
-
-
-Example:
- &i2c1 {
- rmi4-i2c-dev@2c {
- compatible = "syna,rmi4-i2c";
- reg = <0x2c>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&gpio>;
- interrupts = <4 2>;
-
- rmi4-f01@1 {
- reg = <0x1>;
- syna,nosleep-mode = <1>;
- };
-
- rmi4-f11@11 {
- reg = <0x11>;
- touchscreen-inverted-y;
- syna,sensor-type = <2>;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt
deleted file mode 100644
index 632f473db65b..000000000000
--- a/Documentation/devicetree/bindings/input/rmi4/rmi_spi.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-Synaptics RMI4 SPI Device Binding
-
-The Synaptics RMI4 core is able to support RMI4 devices using different
-transports and different functions. This file describes the device tree
-bindings for devices using the SPI transport driver. Complete documentation
-for other transports and functions can be found in
-Documentation/devicetree/bindings/input/rmi4.
-
-Required Properties:
-- compatible: syna,rmi4-spi
-- reg: Chip select address for the device
-- #address-cells: Set to 1 to indicate that the function child nodes
- consist of only on uint32 value.
-- #size-cells: Set to 0 to indicate that the function child nodes do not
- have a size property.
-
-Optional Properties:
-- interrupts: interrupt which the rmi device is connected to.
-See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-
-- spi-rx-delay-us: microsecond delay after a read transfer.
-- spi-tx-delay-us: microsecond delay after a write transfer.
-
-Function Parameters:
-Parameters specific to RMI functions are contained in child nodes of the rmi device
- node. Documentation for the parameters of each function can be found in:
-Documentation/devicetree/bindings/input/rmi4/rmi_f*.txt.
-
-
-
-Example:
- spi@7000d800 {
- rmi4-spi-dev@0 {
- compatible = "syna,rmi4-spi";
- reg = <0x0>;
- #address-cells = <1>;
- #size-cells = <0>;
- spi-max-frequency = <4000000>;
- spi-cpha;
- spi-cpol;
- interrupt-parent = <&gpio>;
- interrupts = <TEGRA_GPIO(K, 2) 0x2>;
- spi-rx-delay-us = <30>;
-
- rmi4-f01@1 {
- reg = <0x1>;
- syna,nosleep-mode = <1>;
- };
-
- rmi4-f11@11 {
- reg = <0x11>;
- touchscreen-inverted-y;
- syna,sensor-type = <2>;
- };
- };
- };
diff --git a/Documentation/devicetree/bindings/input/syna,rmi4.yaml b/Documentation/devicetree/bindings/input/syna,rmi4.yaml
new file mode 100644
index 000000000000..4d4e1a8e36be
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/syna,rmi4.yaml
@@ -0,0 +1,271 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/syna,rmi4.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synaptics RMI4 compliant devices
+
+maintainers:
+ - Jason A. Donenfeld <Jason@zx2c4.com>
+ - Matthias Schiffer <matthias.schiffer@ew.tq-group.com
+ - Vincent Huang <vincent.huang@tw.synaptics.com>
+
+description: |
+ The Synaptics RMI4 (Register Mapped Interface 4) core is able to support RMI4
+ devices using different transports (I2C, SPI) and different functions (e.g.
+ Function 1, 2D sensors using Function 11 or 12).
+
+properties:
+ compatible:
+ enum:
+ - syna,rmi4-i2c
+ - syna,rmi4-spi
+
+ reg:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ interrupts:
+ maxItems: 1
+
+ reset-gpios:
+ maxItems: 1
+ description: Active low signal
+
+ spi-cpha: true
+ spi-cpol: true
+
+ syna,reset-delay-ms:
+ description:
+ Delay to wait after resetting the device.
+
+ syna,startup-delay-ms:
+ description:
+ Delay to wait after powering on the device.
+
+ vdd-supply: true
+ vio-supply: true
+
+ rmi4-f01@1:
+ type: object
+ additionalProperties: false
+ description:
+ Function 1
+
+ properties:
+ reg:
+ maxItems: 1
+
+ syna,nosleep-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1, 2]
+ description:
+ If set the device will run at full power without sleeping. nosleep
+ has 3 modes, 0 will not change the default setting, 1 will disable
+ nosleep (allow sleeping), and 2 will enable nosleep (disabling
+ sleep).
+
+ syna,wakeup-threshold:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Defines the amplitude of the disturbance to the background
+ capacitance that will cause the device to wake from dozing.
+
+ syna,doze-holdoff-ms:
+ description:
+ The delay to wait after the last finger lift and the first doze
+ cycle.
+
+ syna,doze-interval-ms:
+ description:
+ The time period that the device sleeps between finger activity.
+
+ required:
+ - reg
+
+patternProperties:
+ "^rmi4-f1[12]@1[12]$":
+ type: object
+ unevaluatedProperties: false
+ $ref: /schemas/input/touchscreen/touchscreen.yaml#
+ description:
+ RMI4 Function 11 and Function 12 are for 2D touch position sensing.
+
+ properties:
+ reg:
+ maxItems: 1
+
+ syna,clip-x-low:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Minimum value for X.
+
+ syna,clip-y-low:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Minimum value for Y.
+
+ syna,clip-x-high:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Maximum value for X.
+
+ syna,clip-y-high:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Maximum value for Y.
+
+ syna,offset-x:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Add an offset to X.
+
+ syna,offset-y:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Add an offset to Y.
+
+ syna,delta-x-threshold:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Minimum distance on the X axis required to generate an interrupt in
+ reduced reporting mode.
+
+ syna,delta-y-threshold:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Minimum distance on the Y axis required to generate an interrupt in
+ reduced reporting mode.
+
+ syna,sensor-type:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2]
+ description: |
+ Sensor type: 1 for touchscreen 2 for touchpad.
+
+ syna,disable-report-mask:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Mask for disabling posiiton reporting. Used to disable reporing
+ absolute position data.
+
+ syna,rezero-wait-ms:
+ description:
+ Time to wait after issuing a rezero command.
+
+ required:
+ - reg
+
+ "^rmi4-f[0-9a-f]+@[0-9a-f]+$":
+ type: object
+ description:
+ Other functions, not documented yet.
+
+ properties:
+ reg:
+ maxItems: 1
+
+ required:
+ - reg
+
+required:
+ - compatible
+ - reg
+
+unevaluatedProperties: false
+
+allOf:
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: syna,rmi4-i2c
+ then:
+ properties:
+ spi-rx-delay-us: false
+ spi-tx-delay-us: false
+ else:
+ properties:
+ syna,reset-delay-ms: false
+ syna,startup-delay-ms: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@20 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x20>;
+ interrupt-parent = <&gpx1>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+
+ syna,startup-delay-ms = <100>;
+ vdd-supply = <&tsp_vdd>;
+ vio-supply = <&ldo32_reg>;
+
+ pinctrl-0 = <&touch_irq>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,sensor-type = <1>;
+ };
+
+ rmi4-f1a@1a {
+ reg = <0x1a>;
+ };
+ };
+ };
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ touchscreen@0 {
+ compatible = "syna,rmi4-spi";
+ reg = <0x0>;
+ interrupt-parent = <&gpx1>;
+ interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+
+ spi-max-frequency = <4000000>;
+ spi-rx-delay-us = <30>;
+ spi-cpha;
+ spi-cpol;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ touchscreen-inverted-y;
+ syna,sensor-type = <2>;
+ };
+ };
+ };