Merge tag 'input-for-v6.5-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - improvements to PS/2 handling for case when EC has already latched a
   scancode in the data register, but the kernel expects to receive an
   ACK to a command it sent to a device (such as keyboard LED toggle)

 - input drivers for devices connected over I2C bus have been switched
   back to using [new] .probe()

 - uinput allows userspace to inject timestamps for input events

 - support for capacitive keys in Atmel touch controller driver

 - assorted fixes to drv260x, pwm-vibra, ili210x, adxl34x, and other
   drivers

* tag 'input-for-v6.5-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
  Input: pm8941-powerkey - fix debounce on gen2+ PMICs
  MAINTAINERS: Adjust Qualcomm driver globbing
  Input: gameport - provide default trigger() and read()
  Input: tps65219-pwrbutton - use regmap_set_bits()
  Input: tps65219-pwrbutton - convert to .remove_new()
  Input: tests - add test to cover all input_grab_device() function
  Input: gpio-keys - use input_report_key()
  Input: xpad - spelling fixes for "Xbox"
  Input: add HAS_IOPORT dependencies
  Input: libps2 - do not discard non-ack bytes when controlling LEDs
  Input: libps2 - introduce common interrupt handler
  Input: libps2 - fix aborting PS/2 commands
  Input: libps2 - fix NAK handling
  Input: libps2 - rework handling of command response
  Input: libps2 - remove special handling of ACK for command byte
  Input: libps2 - attach ps2dev instances as serio port's drvdata
  Input: Switch i2c drivers back to use .probe()
  dt-bindings: input: cypress,cyapa: convert to dtschema
  Input: adxl34x - do not hardcode interrupt trigger type
  Input: pwm-vibra - add support for enable GPIO
  ...

5 files changed, 60 insertions, 42 deletions

diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
index 3ec579d63570..c40799355ed7 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
@@ -14,6 +14,9 @@ description: |
   Atmel maXTouch touchscreen or touchpads such as the mXT244
   and similar devices.
 
+allOf:
+  - $ref: input.yaml#
+
 properties:
   compatible:
     const: atmel,maxtouch
@@ -60,6 +63,10 @@ properties:
       or experiment to determine which bit corresponds to which input. Use
       KEY_RESERVED for unused padding values.
 
+  linux,keycodes:
+    minItems: 1
+    maxItems: 8
+
   atmel,wakeup-method:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: |
diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.txt b/Documentation/devicetree/bindings/input/cypress,cyapa.txt
deleted file mode 100644
index d3db65916a36..000000000000
--- a/Documentation/devicetree/bindings/input/cypress,cyapa.txt
+++ /dev/null
@@ -1,42 +0,0 @@
-Cypress I2C Touchpad
-
-Required properties:
-- compatible: must be "cypress,cyapa".
-- reg: I2C address of the chip.
-- interrupts: interrupt to which the chip is connected (see interrupt
-	binding[0]).
-
-Optional properties:
-- wakeup-source: touchpad can be used as a wakeup source.
-- pinctrl-names: should be "default" (see pinctrl binding [1]).
-- pinctrl-0: a phandle pointing to the pin settings for the device (see
-	pinctrl binding [1]).
-- vcc-supply: a phandle for the regulator supplying 3.3V power.
-
-[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-[1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-Example:
-	&i2c0 {
-		/* ... */
-
-		/* Cypress Gen3 touchpad */
-		touchpad@67 {
-			compatible = "cypress,cyapa";
-			reg = <0x67>;
-			interrupt-parent = <&gpio>;
-			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;	/* GPIO 2 */
-			wakeup-source;
-		};
-
-		/* Cypress Gen5 and later touchpad */
-		touchpad@24 {
-			compatible = "cypress,cyapa";
-			reg = <0x24>;
-			interrupt-parent = <&gpio>;
-			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;	/* GPIO 2 */
-			wakeup-source;
-		};
-
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/input/cypress,cyapa.yaml b/Documentation/devicetree/bindings/input/cypress,cyapa.yaml
new file mode 100644
index 000000000000..29515151abe9
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/cypress,cyapa.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/cypress,cyapa.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress All Points Addressable (APA) I2C Touchpad / Trackpad
+
+maintainers:
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+properties:
+  compatible:
+    const: cypress,cyapa
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source: true
+
+  vcc-supply:
+    description: 3.3V power
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        trackpad@67 {
+            reg = <0x67>;
+            compatible = "cypress,cyapa";
+            interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpx1>;
+            wakeup-source;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/pwm-vibrator.yaml b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
index d32716c604fe..6398534b43c3 100644
--- a/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
+++ b/Documentation/devicetree/bindings/input/pwm-vibrator.yaml
@@ -32,6 +32,8 @@ properties:
     minItems: 1
     maxItems: 2
 
+  enable-gpios: true
+
   vcc-supply: true
 
   direction-duty-cycle-ns:
diff --git a/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml
index 1959ec394768..4080422a9eb5 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/cypress,tt21000.yaml
@@ -40,6 +40,8 @@ properties:
   linux,keycodes:
     description: EV_ABS specific event code generated by the axis.
 
+  wakeup-source: true
+
 patternProperties:
   "^button@[0-9]+$":
     type: object