diff options
author | Olof Johansson <olof@lixom.net> | 2019-12-05 13:16:58 -0800 |
---|---|---|
committer | Olof Johansson <olof@lixom.net> | 2019-12-05 13:18:54 -0800 |
commit | 942e6f8a8314e5550e254519dfba4ccd5170421d (patch) | |
tree | 75ec655b440fbc1c454247af38b5596dd8c78de9 /Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt | |
parent | 336bab731be76a90291697e51d2aed0ad67d7cb5 (diff) | |
parent | b08baef02b26cf7c2123e4a24a2fa1fb7a593ffb (diff) |
Merge mainline/master into arm/fixes
This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.
Signed-off-by: Olof Johansson <olof@lixom.net>
Diffstat (limited to 'Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt')
-rw-r--r-- | Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt | 49 |
1 files changed, 49 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt new file mode 100644 index 000000000000..f0ad7801e8cf --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-extirq.txt @@ -0,0 +1,49 @@ +* Freescale Layerscape external IRQs + +Some Layerscape SOCs (LS1021A, LS1043A, LS1046A) support inverting +the polarity of certain external interrupt lines. + +The device node must be a child of the node representing the +Supplemental Configuration Unit (SCFG). + +Required properties: +- compatible: should be "fsl,<soc-name>-extirq", e.g. "fsl,ls1021a-extirq". +- #interrupt-cells: Must be 2. The first element is the index of the + external interrupt line. The second element is the trigger type. +- #address-cells: Must be 0. +- interrupt-controller: Identifies the node as an interrupt controller +- reg: Specifies the Interrupt Polarity Control Register (INTPCR) in + the SCFG. +- interrupt-map: Specifies the mapping from external interrupts to GIC + interrupts. +- interrupt-map-mask: Must be <0xffffffff 0>. + +Example: + scfg: scfg@1570000 { + compatible = "fsl,ls1021a-scfg", "syscon"; + reg = <0x0 0x1570000 0x0 0x10000>; + big-endian; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1570000 0x10000>; + + extirq: interrupt-controller@1ac { + compatible = "fsl,ls1021a-extirq"; + #interrupt-cells = <2>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1ac 4>; + interrupt-map = + <0 0 &gic GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <1 0 &gic GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <2 0 &gic GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <3 0 &gic GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <4 0 &gic GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <5 0 &gic GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0xffffffff 0x0>; + }; + }; + + + interrupts-extended = <&gic GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, + <&extirq 1 IRQ_TYPE_LEVEL_LOW>; |