Merge tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC boardfile updates from Arnd Bergmann
 "Unused boardfile removal for 6.3

  This is a follow-up to the deprecation of most of the old-style board
  files that was merged in linux-6.0, removing them for good.

  This branch is almost exclusively dead code removal based on those
  annotations. Some device driver removals went through separate
  subsystem trees, but the majority is in the same branch, in order to
  better handle dependencies between the patches and avoid breaking
  bisection.

  Unfortunately that leads to merge conflicts against other changes in
  the subsystem trees, but they should all be trivial to resolve by
  removing the files.

  See commit 7d0d3fa7339e ("Merge tag 'arm-boardfiles-6.0' of
  git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc") for the
  description of which machines were marked unused and are now removed.

  The only removals that got postponed are Terastation WXL (mv78xx0) and
  Jornada720 (StrongARM1100), which turned out to still have potential
  users"

* tag 'arm-boardfile-remove-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (91 commits)
  mmc: omap: drop TPS65010 dependency
  ARM: pxa: restore mfp-pxa320.h
  usb: ohci-omap: avoid unused-variable warning
  ARM: debug: remove references in DEBUG_UART_8250_SHIFT to removed configs
  ARM: s3c: remove obsolete s3c-cpu-freq header
  MAINTAINERS: adjust SAMSUNG SOC CLOCK DRIVERS after s3c24xx support removal
  MAINTAINERS: update file entries after arm multi-platform rework and mach-pxa removal
  ARM: remove CONFIG_UNUSED_BOARD_FILES
  mfd: remove htc-pasic3 driver
  w1: remove ds1wm driver
  usb: remove ohci-tmio driver
  fbdev: remove w100fb driver
  fbdev: remove tmiofb driver
  mmc: remove tmio_mmc driver
  mfd: remove ucb1400 support
  mfd: remove toshiba tmio drivers
  rtc: remove v3020 driver
  power: remove pda_power supply driver
  ASoC: pxa: remove unused board support
  pcmcia: remove unused pxa/sa1100 drivers
  ...

1 files changed, 0 insertions, 53 deletions

diff --git a/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt
deleted file mode 100644
index c54c5a9a2a90..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/samsung,s3c24xx-irq.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-Samsung S3C24XX Interrupt Controllers
-
-The S3C24XX SoCs contain a custom set of interrupt controllers providing a
-varying number of interrupt sources. The set consists of a main- and sub-
-controller and on newer SoCs even a second main controller.
-
-Required properties:
-- compatible: Compatible property value should be "samsung,s3c2410-irq"
-  for machines before s3c2416 and "samsung,s3c2416-irq" for s3c2416 and later.
-
-- reg: Physical base address of the controller and length of memory mapped
-  region.
-
-- interrupt-controller : Identifies the node as an interrupt controller
-
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value shall be 4 and interrupt descriptor shall
-  have the following format:
-      <ctrl_num parent_irq ctrl_irq type>
-
-  ctrl_num contains the controller to use:
-      - 0 ... main controller
-      - 1 ... sub controller
-      - 2 ... second main controller on s3c2416 and s3c2450
-  parent_irq contains the parent bit in the main controller and will be
-             ignored in main controllers
-  ctrl_irq contains the interrupt bit of the controller
-  type contains the trigger type to use
-
-Example:
-
-	interrupt-controller@4a000000 {
-		compatible = "samsung,s3c2410-irq";
-		reg = <0x4a000000 0x100>;
-		interrupt-controller;
-		#interrupt-cells=<4>;
-	};
-
-	[...]
-
-	serial@50000000 {
-		compatible = "samsung,s3c2410-uart";
-		reg = <0x50000000 0x4000>;
-		interrupt-parent = <&subintc>;
-		interrupts = <1 28 0 4>, <1 28 1 4>;
-	};
-
-	rtc@57000000 {
-		compatible = "samsung,s3c2410-rtc";
-		reg = <0x57000000 0x100>;
-		interrupt-parent = <&intc>;
-		interrupts = <0 30 0 3>, <0 8 0 3>;
-	};