Merge mainline/master into arm/fixes

This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 0 insertions, 47 deletions

diff --git a/Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt b/Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt
deleted file mode 100644
index 1d2b7fee7b85..000000000000
--- a/Documentation/devicetree/bindings/mailbox/stm32-ipcc.txt
+++ /dev/null
@@ -1,47 +0,0 @@
-* STMicroelectronics STM32 IPCC (Inter-Processor Communication Controller)
-
-The IPCC block provides a non blocking signaling mechanism to post and
-retrieve messages in an atomic way between two processors.
-It provides the signaling for N bidirectionnal channels. The number of channels
-(N) can be read from a dedicated register.
-
-Required properties:
-- compatible:   Must be "st,stm32mp1-ipcc"
-- reg:          Register address range (base address and length)
-- st,proc-id:   Processor id using the mailbox (0 or 1)
-- clocks:       Input clock
-- interrupt-names: List of names for the interrupts described by the interrupt
-                   property. Must contain the following entries:
-                   - "rx"
-                   - "tx"
-                   - "wakeup"
-- interrupts:   Interrupt specifiers for "rx channel occupied", "tx channel
-                free" and "system wakeup".
-- #mbox-cells:  Number of cells required for the mailbox specifier. Must be 1.
-                The data contained in the mbox specifier of the "mboxes"
-                property in the client node is the mailbox channel index.
-
-Optional properties:
-- wakeup-source: Flag to indicate whether this device can wake up the system
-
-
-
-Example:
-	ipcc: mailbox@4c001000 {
-		compatible = "st,stm32mp1-ipcc";
-		#mbox-cells = <1>;
-		reg = <0x4c001000 0x400>;
-		st,proc-id = <0>;
-		interrupts-extended = <&intc GIC_SPI 100 IRQ_TYPE_NONE>,
-				      <&intc GIC_SPI 101 IRQ_TYPE_NONE>,
-				      <&aiec 62 1>;
-		interrupt-names = "rx", "tx", "wakeup";
-		clocks = <&rcc_clk IPCC>;
-		wakeup-source;
-	}
-
-Client:
-	mbox_test {
-		...
-		mboxes = <&ipcc 0>, <&ipcc 1>;
-	};