Merge tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - the old V4L2 core videobuf kAPI was finally removed. All media
   drivers should now be using VB2 kAPI

 - new automotive driver: mgb4

 - new platform video driver: npcm-video

 - new sensor driver: mt9m114

 - new TI driver used in conjunction with Cadence CSI2RX IP to bridge
   TI-specific parts

 - ir-rx51 was removed and the N900 DT binding was moved to the
   pwm-ir-tx generic driver

 - drop atomisp-specific ov5693, using the upstream driver instead

 - the camss driver has gained RDI3 support for VFE 17x

 - the atomisp driver now detects ISP2400 or ISP2401 at run time. No
   need to set it up at build time anymore

 - lots of driver fixes, cleanups and improvements

* tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
  media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM
  media: venus: Fix firmware path for resources
  media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by
  media: venus: hfi_parser: Add check to keep the number of codecs within range
  media: venus: hfi: add checks to handle capabilities from firmware
  media: venus: hfi: fix the check to handle session buffer requirement
  media: venus: hfi: add checks to perform sanity on queue pointers
  media: platform: cadence: select MIPI_DPHY dependency
  media: MAINTAINERS: Fix path for J721E CSI2RX bindings
  media: cec: meson: always include meson sub-directory in Makefile
  media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr()
  media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config()
  media: mediatek: vcodec: using encoder device to alloc/free encoder memory
  media: imx-jpeg: notify source chagne event when the first picture parsed
  media: cx231xx: Use EP5_BUF_SIZE macro
  media: siano: Drop unnecessary error check for debugfs_create_dir/file()
  media: mediatek: vcodec: Handle invalid encoder vsi
  media: aspeed: Drop unnecessary error check for debugfs_create_file()
  Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED
  Documentation: media: gen-errors.rst: fix confusing ENOTTY description
  ...

9 files changed, 267 insertions, 30 deletions

diff --git a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
index 1e2df8cf2937..60f19e1152b3 100644
--- a/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
@@ -14,6 +14,9 @@ description: |-
   interface and CCI (I2C compatible) control bus. The output format
   is raw Bayer.
 
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
 properties:
   compatible:
     const: hynix,hi846
@@ -86,7 +89,7 @@ required:
   - vddd-supply
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -109,6 +112,8 @@ examples:
             vddio-supply = <&reg_camera_vddio>;
             reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
             shutdown-gpios = <&gpio5 4 GPIO_ACTIVE_LOW>;
+            orientation = <0>;
+            rotation = <0>;
 
             port {
                 camera_out: endpoint {
diff --git a/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
new file mode 100644
index 000000000000..f6b87892068a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/onnn,mt9m114.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/onnn,mt9m114.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: onsemi 1/6-inch 720p CMOS Digital Image Sensor
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |-
+  The onsemi MT9M114 is a 1/6-inch 720p (1.26 Mp) CMOS digital image sensor
+  with an active pixel-array size of 1296H x 976V. It is programmable through
+  an I2C interface and outputs image data over a 8-bit parallel or 1-lane MIPI
+  CSI-2 connection.
+
+properties:
+  compatible:
+    const: onnn,mt9m114
+
+  reg:
+    description: I2C device address
+    enum:
+      - 0x48
+      - 0x5d
+
+  clocks:
+    description: EXTCLK clock signal
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Core digital voltage supply, 1.8V
+
+  vddio-supply:
+    description:
+      I/O digital voltage supply, 1.8V or 2.8V
+
+  vaa-supply:
+    description:
+      Analog voltage supply, 2.8V
+
+  reset-gpios:
+    description: |-
+      Reference to the GPIO connected to the RESET_BAR pin, if any (active
+      low).
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        additionalProperties: false
+
+        properties:
+          bus-type:
+            enum: [4, 5, 6]
+
+          link-frequencies: true
+          remote-endpoint: true
+
+          # The number and mapping of lanes (for CSI-2), and the bus width and
+          # signal polarities (for parallel and BT.656) are fixed and must not
+          # be specified.
+
+        required:
+          - bus-type
+          - link-frequencies
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vdd-supply
+  - vddio-supply
+  - vaa-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sensor@48 {
+            compatible = "onnn,mt9m114";
+            reg = <0x48>;
+
+            clocks = <&clk24m 0>;
+
+            reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
+
+            vddio-supply = <&reg_cam_1v8>;
+            vdd-supply = <&reg_cam_1v8>;
+            vaa-supply = <&reg_2p8v>;
+
+            port {
+                endpoint {
+                    bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+                    link-frequencies = /bits/ 64 <384000000>;
+                    remote-endpoint = <&mipi_csi_in>;
+                };
+            };
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
index 763cebe03dc2..67c1c291327b 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
@@ -68,12 +68,6 @@ properties:
       marked GPIO_ACTIVE_LOW.
     maxItems: 1
 
-  rotation:
-    enum:
-      - 0    # Sensor Mounted Upright
-      - 180  # Sensor Mounted Upside Down
-    default: 0
-
   port:
     $ref: /schemas/graph.yaml#/$defs/port-base
     additionalProperties: false
@@ -114,7 +108,7 @@ required:
   - reset-gpios
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
index 50579c947f3c..d96199031b66 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov4689.yaml
@@ -52,10 +52,6 @@ properties:
     description:
       GPIO connected to the reset pin (active low)
 
-  orientation: true
-
-  rotation: true
-
   port:
     $ref: /schemas/graph.yaml#/$defs/port-base
     additionalProperties: false
@@ -95,7 +91,7 @@ required:
   - dvdd-supply
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
index a621032f9bd0..2c5e69356658 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
@@ -44,11 +44,6 @@ properties:
     description: >
       Reference to the GPIO connected to the reset pin, if any.
 
-  rotation:
-    enum:
-      - 0
-      - 180
-
   port:
     description: Digital Output Port
     $ref: /schemas/graph.yaml#/$defs/port-base
@@ -85,7 +80,7 @@ required:
   - DOVDD-supply
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5642.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5642.yaml
new file mode 100644
index 000000000000..01f8b2b3fd17
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5642.yaml
@@ -0,0 +1,141 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5642.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OmniVision OV5642 Image Sensor
+
+maintainers:
+  - Fabio Estevam <festevam@gmail.com>
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: ovti,ov5642
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: XCLK Input Clock
+
+  AVDD-supply:
+    description: Analog voltage supply, 2.8V.
+
+  DVDD-supply:
+    description: Digital core voltage supply, 1.5V.
+
+  DOVDD-supply:
+    description: Digital I/O voltage supply, 1.8V.
+
+  powerdown-gpios:
+    maxItems: 1
+    description: Reference to the GPIO connected to the powerdown pin, if any.
+
+  reset-gpios:
+    maxItems: 1
+    description: Reference to the GPIO connected to the reset pin, if any.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    description: |
+      Video output port.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-type:
+            enum: [5, 6]
+
+          bus-width:
+            enum: [8, 10]
+            default: 10
+
+          data-shift:
+            enum: [0, 2]
+            default: 0
+
+          hsync-active:
+            enum: [0, 1]
+            default: 1
+
+          vsync-active:
+            enum: [0, 1]
+            default: 1
+
+          pclk-sample:
+            enum: [0, 1]
+            default: 1
+
+        allOf:
+          - if:
+              properties:
+                bus-type:
+                  const: 6
+            then:
+              properties:
+                hsync-active: false
+                vsync-active: false
+
+          - if:
+              properties:
+                bus-width:
+                  const: 10
+            then:
+              properties:
+                data-shift:
+                  const: 0
+
+        required:
+          - bus-type
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+      #include <dt-bindings/gpio/gpio.h>
+      #include <dt-bindings/media/video-interfaces.h>
+
+      i2c {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          camera@3c {
+              compatible = "ovti,ov5642";
+              reg = <0x3c>;
+              pinctrl-names = "default";
+              pinctrl-0 = <&pinctrl_ov5642>;
+              clocks = <&clk_ext_camera>;
+              DOVDD-supply = <&vgen4_reg>;
+              AVDD-supply = <&vgen3_reg>;
+              DVDD-supply = <&vgen2_reg>;
+              powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+              reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+
+              port {
+                  ov5642_to_parallel: endpoint {
+                      bus-type = <MEDIA_BUS_TYPE_PARALLEL>;
+                      remote-endpoint = <&parallel_from_ov5642>;
+                      bus-width = <8>;
+                      data-shift = <2>; /* lines 9:2 are used */
+                      hsync-active = <0>;
+                      vsync-active = <0>;
+                      pclk-sample = <1>;
+                  };
+              };
+          };
+      };
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
index 6829a4aadd22..3368b3bd8ef2 100644
--- a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
@@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Omnivision OV5693/OV5695 CMOS Sensors
 
 maintainers:
-  - Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
+  - Tommaso Merciai <tomm.merciai@gmail.com>
 
 description: |
   The Omnivision OV5693/OV5695 are high performance, 1/4-inch, 5 megapixel, CMOS
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
index e2470dd5920c..60903da84e1f 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
@@ -91,7 +91,7 @@ required:
   - vddd-supply
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
index 642f9b15d359..9a00dab2e8a3 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
@@ -44,14 +44,6 @@ properties:
     description: Sensor reset (XCLR) GPIO
     maxItems: 1
 
-  flash-leds: true
-
-  lens-focus: true
-
-  orientation: true
-
-  rotation: true
-
   port:
     $ref: /schemas/graph.yaml#/$defs/port-base
     unevaluatedProperties: false
@@ -89,7 +81,7 @@ required:
   - ovdd-supply
   - port
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |