diff options
| author | Petr Štetiar <ynezz@true.cz> | 2019-05-03 16:27:07 +0200 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2019-05-05 21:47:07 -0700 |
| commit | 687e3d5550c7b0e4dca0179103741a44cd3f7864 (patch) | |
| tree | c36428e226c765da3cfe8612d41e2af974e0517f /Documentation/devicetree/bindings/net/qca,qca7000.txt | |
| parent | d01f449c008a3f41fa44c603e28a7452ab8f8e68 (diff) | |
dt-bindings: doc: reflect new NVMEM of_get_mac_address behaviour
As of_get_mac_address now supports NVMEM under the hood, we need to update
the bindings documentation with the new nvmem-cell* properties, which would
mean copy&pasting a lot of redundant information to every binding
documentation currently referencing some of the MAC address properties.
So I've just removed all the references to the optional MAC address
properties and replaced them with the small note referencing
net/ethernet.txt file.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'Documentation/devicetree/bindings/net/qca,qca7000.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/net/qca,qca7000.txt | 4 |
1 files changed, 3 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/net/qca,qca7000.txt b/Documentation/devicetree/bindings/net/qca,qca7000.txt index e4a8a51086df..21c36e524993 100644 --- a/Documentation/devicetree/bindings/net/qca,qca7000.txt +++ b/Documentation/devicetree/bindings/net/qca,qca7000.txt @@ -23,7 +23,6 @@ Optional properties: Numbers smaller than 1000000 or greater than 16000000 are invalid. Missing the property will set the SPI frequency to 8000000 Hertz. -- local-mac-address : see ./ethernet.txt - qca,legacy-mode : Set the SPI data transfer of the QCA7000 to legacy mode. In this mode the SPI master must toggle the chip select between each data word. In burst mode these gaps aren't @@ -31,6 +30,9 @@ Optional properties: the QCA7000 is setup via GPIO pin strapping. If the property is missing the driver defaults to burst mode. +The MAC address will be determined using the optional properties +defined in ethernet.txt. + SPI Example: /* Freescale i.MX28 SPI master*/ |