Merge branch 'next' into for-linus

Prepare input updates for 5.20 (or 6.0) merge window.

1 files changed, 0 insertions, 84 deletions

diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
deleted file mode 100644
index b3b75c1e6285..000000000000
--- a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-Qualcomm's USB HS PHY
-
-PROPERTIES
-
-- compatible:
-    Usage: required
-    Value type: <string>
-    Definition: Should contain "qcom,usb-hs-phy" and more specifically one of the
-                following:
-
-                        "qcom,usb-hs-phy-apq8064"
-                        "qcom,usb-hs-phy-msm8916"
-                        "qcom,usb-hs-phy-msm8974"
-
-- #phy-cells:
-    Usage: required
-    Value type: <u32>
-    Definition: Should contain 0
-
-- clocks:
-    Usage: required
-    Value type: <prop-encoded-array>
-    Definition: Should contain clock specifier for the reference and sleep
-                clocks
-
-- clock-names:
-    Usage: required
-    Value type: <stringlist>
-    Definition: Should contain "ref" and "sleep" for the reference and sleep
-                clocks respectively
-
-- resets:
-    Usage: required
-    Value type: <prop-encoded-array>
-    Definition: Should contain the phy and POR resets
-
-- reset-names:
-    Usage: required
-    Value type: <stringlist>
-    Definition: Should contain "phy" and "por" for the phy and POR resets
-                respectively
-
-- v3p3-supply:
-    Usage: required
-    Value type: <phandle>
-    Definition: Should contain a reference to the 3.3V supply
-
-- v1p8-supply:
-    Usage: required
-    Value type: <phandle>
-    Definition: Should contain a reference to the 1.8V supply
-
-- extcon:
-    Usage: optional
-    Value type: <prop-encoded-array>
-    Definition: Should contain the vbus extcon
-
-- qcom,init-seq:
-    Usage: optional
-    Value type: <u8 array>
-    Definition: Should contain a sequence of ULPI address and value pairs to
-                program into the ULPI_EXT_VENDOR_SPECIFIC area. This is related
-                to Device Mode Eye Diagram test. The addresses are offsets
-                from the ULPI_EXT_VENDOR_SPECIFIC address, for example,
-                <0x1 0x53> would mean "write the value 0x53 to address 0x81".
-
-EXAMPLE
-
-otg: usb-controller {
-	ulpi {
-		phy {
-			compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy";
-			#phy-cells = <0>;
-			clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
-			clock-names = "ref", "sleep";
-			resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
-			reset-names = "phy", "por";
-			v3p3-supply = <&pm8941_l24>;
-			v1p8-supply = <&pm8941_l6>;
-			extcon = <&smbb>;
-			qcom,init-seq = /bits/ 8 <0x1 0x63>;
-		};
-	};
-};