Merge tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is a calm cycle, not much happened this time around: not even
  much incremental development. Some three new drivers, that is all.

  No core changes.

  New drivers:

   - NXP (ex Freescale) i.MX 8QM driver.

   - NXP (ex Freescale) i.MX 8MM driver.

   - AT91 SAM9X60 subdriver.

  Improvements:

   - Support for external interrups (EINT) on Mediatek virtual GPIOs.

   - Make BCM2835 pin config fully generic.

   - Lots of Renesas SH-PFC incremental improvements"

* tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (70 commits)
  pinctrl: imx: fix scu link errors
  dt-bindings: pinctrl: Document the i.MX50 IOMUXC binding
  pinctrl: qcom: spmi-gpio: Reorder debug print
  pinctrl: nomadik: fix possible object reference leak
  pinctrl: stm32: return error upon hwspinlock failure
  pinctrl: stm32: fix memory leak issue
  pinctrl: sh-pfc: r8a77965: Add DRIF pins, groups and functions
  pinctrl: sh-pfc: r8a77965: Add TMU pins, groups and functions
  pinctrl: sh-pfc: Validate fixed-size field widths at build time
  pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups
  pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin group
  pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group
  pinctrl: sh-pfc: emev2: Add missing pinmux functions
  pinctrl: sunxi: Support I/O bias voltage setting on A80
  pinctrl: ingenic: Add LCD pins for the JZ4725B SoC
  pinctrl: samsung: Remove legacy API for handling external wakeup interrupts mask
  pinctrl: bcm2835: Direct GPIO config changes to generic pinctrl
  pinctrl: bcm2835: declare pin config as generic
  pinctrl: qcom: qcs404: Drop unused UFS_RESET macro
  dt-bindings: add documentation for slew rate
  ...

1 files changed, 36 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
new file mode 100644
index 000000000000..524a16fca666
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx8mm-pinctrl.txt
@@ -0,0 +1,36 @@
+* Freescale IMX8MM IOMUX Controller
+
+Please refer to fsl,imx-pinctrl.txt and pinctrl-bindings.txt in this directory
+for common binding part and usage.
+
+Required properties:
+- compatible: "fsl,imx8mm-iomuxc"
+- reg: should contain the base physical address and size of the iomuxc
+  registers.
+
+Required properties in sub-nodes:
+- fsl,pins: each entry consists of 6 integers and represents the mux and config
+  setting for one pin.  The first 5 integers <mux_reg conf_reg input_reg mux_val
+  input_val> are specified using a PIN_FUNC_ID macro, which can be found in
+  <dt-bindings/pinctrl/imx8mm-pinfunc.h>. The last integer CONFIG is
+  the pad setting value like pull-up on this pin.  Please refer to i.MX8M Mini
+  Reference Manual for detailed CONFIG settings.
+
+Examples:
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart1>;
+};
+
+iomuxc: pinctrl@30330000 {
+        compatible = "fsl,imx8mm-iomuxc";
+        reg = <0x0 0x30330000 0x0 0x10000>;
+
+        pinctrl_uart1: uart1grp {
+                fsl,pins = <
+                        MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX             0x140
+                        MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX             0x140
+                >;
+        };
+};