Merge mainline/master into arm/fixes

This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 60 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
new file mode 100644
index 000000000000..520e07e6f21b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/syscon-poweroff.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic SYSCON mapped register poweroff driver
+
+maintainers:
+  - Sebastian Reichel <sre@kernel.org>
+
+description: |+
+  This is a generic poweroff driver using syscon to map the poweroff register.
+  The poweroff is generally performed with a write to the poweroff register
+  defined by the register map pointed by syscon reference plus the offset
+  with the value and mask defined in the poweroff node.
+  Default will be little endian mode, 32 bit access only.
+
+properties:
+  compatible:
+    const: syscon-poweroff
+
+  mask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Update only the register bits defined by the mask (32 bit).
+
+  offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset in the register map for the poweroff register (in bytes).
+
+  regmap:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Phandle to the register map node.
+
+  value:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The poweroff value written to the poweroff register (32 bit access).
+
+required:
+  - compatible
+  - regmap
+  - offset
+
+allOf:
+  - if:
+      not:
+        required:
+          - mask
+    then:
+      required:
+        - value
+
+examples:
+  - |
+    poweroff {
+        compatible = "syscon-poweroff";
+        regmap = <&regmapnode>;
+        offset = <0x0>;
+        mask = <0x7a>;
+    };