Merge tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver changes for 6.6-rc1.

  Lots of cleanups in here this cycle, and some driver updates. Short
  summary is:

   - Jiri's continued work to make the tty code and apis be a bit more
     sane with regards to modern kernel coding style and types

   - cpm_uart driver updates

   - n_gsm updates and fixes

   - meson driver updates

   - sc16is7xx driver updates

   - 8250 driver updates for different hardware types

   - qcom-geni driver fixes

   - tegra serial driver change

   - stm32 driver updates

   - synclink_gt driver cleanups

   - tty structure size reduction

  All of these have been in linux-next this week with no reported
  issues. The last bit of cleanups from Jiri and the tty structure size
  reduction came in last week, a bit late but as they were just style
  changes and size reductions, I figured they should get into this merge
  cycle so that others can work on top of them with no merge conflicts"

* tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
  tty: shrink the size of struct tty_struct by 40 bytes
  tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw()
  tty: n_tty: extract ECHO_OP processing to a separate function
  tty: n_tty: unify counts to size_t
  tty: n_tty: use u8 for chars and flags
  tty: n_tty: simplify chars_in_buffer()
  tty: n_tty: remove unsigned char casts from character constants
  tty: n_tty: move newline handling to a separate function
  tty: n_tty: move canon handling to a separate function
  tty: n_tty: use MASK() for masking out size bits
  tty: n_tty: make n_tty_data::num_overrun unsigned
  tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun()
  tty: n_tty: use 'num' for writes' counts
  tty: n_tty: use output character directly
  tty: n_tty: make flow of n_tty_receive_buf_common() a bool
  Revert "tty: serial: meson: Add a earlycon for the T7 SoC"
  Documentation: devices.txt: Fix minors for ttyCPM*
  Documentation: devices.txt: Remove ttySIOC*
  Documentation: devices.txt: Remove ttyIOC*
  serial: 8250_bcm7271: improve bcm7271 8250 port
  ...

4 files changed, 57 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
index 01ec45b3b406..2e189e548327 100644
--- a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
@@ -33,6 +33,7 @@ properties:
               - amlogic,meson8b-uart
               - amlogic,meson-gx-uart
               - amlogic,meson-s4-uart
+              - amlogic,meson-a1-uart
           - const: amlogic,meson-ao-uart
       - description: Always-on power domain UART controller on G12A SoCs
         items:
@@ -46,10 +47,15 @@ properties:
           - amlogic,meson8b-uart
           - amlogic,meson-gx-uart
           - amlogic,meson-s4-uart
+          - amlogic,meson-a1-uart
       - description: Everything-Else power domain UART controller on G12A SoCs
         items:
           - const: amlogic,meson-g12a-uart
           - const: amlogic,meson-gx-uart
+      - description: UART controller on S4 compatible SoCs
+        items:
+          - const: amlogic,t7-uart
+          - const: amlogic,meson-s4-uart
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
index 93062403276b..3a5b59f5d3e3 100644
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
@@ -25,11 +25,15 @@ properties:
           - fsl,imxrt1050-lpuart
       - items:
           - enum:
-              - fsl,imx93-lpuart
               - fsl,imx8ulp-lpuart
           - const: fsl,imx7ulp-lpuart
       - items:
           - enum:
+              - fsl,imx93-lpuart
+          - const: fsl,imx8ulp-lpuart
+          - const: fsl,imx7ulp-lpuart
+      - items:
+          - enum:
               - fsl,imx8qm-lpuart
               - fsl,imx8dxl-lpuart
           - const: fsl,imx8qxp-lpuart
diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
index 0fa8e3e43bf8..1a7e4bff0456 100644
--- a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
+++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
@@ -23,6 +23,9 @@ Optional properties:
     1 = active low.
 - irda-mode-ports: An array that lists the indices of the port that
 		   should operate in IrDA mode.
+- nxp,modem-control-line-ports: An array that lists the indices of the port that
+				should have shared GPIO lines configured as
+				modem control lines.
 
 Example:
         sc16is750: sc16is750@51 {
@@ -35,6 +38,26 @@ Example:
                 #gpio-cells = <2>;
         };
 
+	sc16is752: sc16is752@53 {
+		compatible = "nxp,sc16is752";
+		reg = <0x53>;
+		clocks = <&clk20m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */
+		gpio-controller; /* Port 0 as GPIOs */
+		#gpio-cells = <2>;
+	};
+
+	sc16is752: sc16is752@54 {
+		compatible = "nxp,sc16is752";
+		reg = <0x54>;
+		clocks = <&clk20m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */
+	};
+
 * spi as bus
 
 Required properties:
@@ -59,6 +82,9 @@ Optional properties:
     1 = active low.
 - irda-mode-ports: An array that lists the indices of the port that
 		   should operate in IrDA mode.
+- nxp,modem-control-line-ports: An array that lists the indices of the port that
+				should have shared GPIO lines configured as
+				modem control lines.
 
 Example:
 	sc16is750: sc16is750@0 {
@@ -70,3 +96,23 @@ Example:
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	sc16is752: sc16is752@1 {
+		compatible = "nxp,sc16is752";
+		reg = <1>;
+		clocks = <&clk20m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */
+		gpio-controller; /* Port 0 as GPIOs */
+		#gpio-cells = <2>;
+	};
+
+	sc16is752: sc16is752@2 {
+		compatible = "nxp,sc16is752";
+		reg = <2>;
+		clocks = <&clk20m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */
+	};
diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
index 3862411c77b5..17c553123f96 100644
--- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
@@ -117,7 +117,6 @@ properties:
 required:
   - compatible
   - reg
-  - interrupts
 
 unevaluatedProperties: false