diff options
| author | Linus Walleij <linus.walleij@linaro.org> | 2021-03-05 19:37:35 +0100 |
|---|---|---|
| committer | Marcel Holtmann <marcel@holtmann.org> | 2021-03-08 10:25:49 +0100 |
| commit | 7820ee1c4757d888c2255b8eb7f74b8d1e5ac555 (patch) | |
| tree | 12e57d8974d904a71ac343349ab841d7a56f3d0d /Documentation/devicetree/bindings/serial | |
| parent | ff02db13e9bfa01e0d66c5fa53da29bd1f1b208a (diff) | |
Bluetooth: btbcm: Rewrite bindings in YAML and add reset
This rewrites the Broadcom bluetooth bindings in YAML and
adds a GPIO handle for the BT_RST_N line as used on some
platforms.
The Ingenic UART binding was using this binding in its
example DTS fragment, however mistakenly using "vcc-supply"
for what is called "vbat-supply". The proper DTS files
and the code in the kernel all use "vbat-supply" so
fix up the example in this patch so we ge a clean
check.
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Diffstat (limited to 'Documentation/devicetree/bindings/serial')
| -rw-r--r-- | Documentation/devicetree/bindings/serial/ingenic,uart.yaml | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml index 559213899d73..7748d8c3bab8 100644 --- a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml +++ b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml @@ -91,7 +91,7 @@ examples: bluetooth { compatible = "brcm,bcm4330-bt"; reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>; - vcc-supply = <&wlan0_power>; + vbat-supply = <&wlan0_power>; device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>; host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>; |