ARM: tegra: document use of standard DMA DT bindings

Update all the Tegra DT bindings to require the standard dmas/dma-names
properties rather than non-standard nvidia,dma-request-selector property.

This is a DT-ABI-incompatible change. It is the second of two changes
required for me to consider the Tegra DT bindings as stable, the other
being the previous conversion to the common reset bindings.

Signed-off-by: Stephen Warren <swarren@nvidia.com>

3 files changed, 31 insertions, 15 deletions

diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt
index 2b6817f6e40e..eaf00102d92c 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-ac97.txt
@@ -4,14 +4,17 @@ Required properties:
 - compatible : "nvidia,tegra20-ac97"
 - reg : Should contain AC97 controller registers location and length
 - interrupts : Should contain AC97 interrupt
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
 - resets : Must contain an entry for each entry in reset-names.
   See ../reset/reset.txt for details.
 - reset-names : Must include the following entries:
   - ac97
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
-  request selector for the AC97 controller
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx
+  - tx
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
 - nvidia,codec-reset-gpio : The Tegra GPIO controller's phandle and the number
   of the GPIO used to reset the external AC97 codec
 - nvidia,codec-sync-gpio : The Tegra GPIO controller's phandle and the number
@@ -23,10 +26,11 @@ ac97@70002000 {
 	compatible = "nvidia,tegra20-ac97";
 	reg = <0x70002000 0x200>;
 	interrupts = <0 81 0x04>;
-	nvidia,dma-request-selector = <&apbdma 12>;
 	nvidia,codec-reset-gpio = <&gpio 170 0>;
 	nvidia,codec-sync-gpio = <&gpio 120 0>;
 	clocks = <&tegra_car 3>;
 	resets = <&tegra_car 3>;
 	reset-names = "ac97";
+	dmas = <&apbdma 12>, <&apbdma 12>;
+	dma-names = "rx", "tx";
 };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
index 8b070aeca3db..dc30c6bfbe95 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
@@ -4,14 +4,17 @@ Required properties:
 - compatible : "nvidia,tegra20-i2s"
 - reg : Should contain I2S registers location and length
 - interrupts : Should contain I2S interrupt
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
 - resets : Must contain an entry for each entry in reset-names.
   See ../reset/reset.txt for details.
 - reset-names : Must include the following entries:
   - i2s
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
-  request selector for this I2S controller
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx
+  - tx
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
 
 Example:
 
@@ -19,8 +22,9 @@ i2s@70002800 {
 	compatible = "nvidia,tegra20-i2s";
 	reg = <0x70002800 0x200>;
 	interrupts = < 45 >;
-	nvidia,dma-request-selector = < &apbdma 2 >;
 	clocks = <&tegra_car 11>;
 	resets = <&tegra_car 11>;
 	reset-names = "i2s";
+	dmas = <&apbdma 21>, <&apbdma 21>;
+	dma-names = "rx", "tx";
 };
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
index 60d59a54ca07..32de7ec789aa 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt
@@ -7,11 +7,6 @@ Required properties:
   - Tegra30 requires 2 entries, for the APBIF and AHUB/AUDIO register blocks.
   - Tegra114 requires an additional entry, for the APBIF2 register block.
 - interrupts : Should contain AHUB interrupt
-- nvidia,dma-request-selector : A list of the DMA channel specifiers. Each
-  entry contains the Tegra DMA controller's phandle and request selector.
-  If a single entry is present, the request selectors for the channels are
-  assumed to be contiguous, and increment from this value.
-  If multiple values are given, one value must be given per channel.
 - clocks : Must contain an entry for each entry in clock-names.
   See ../clocks/clock-bindings.txt for details.
 - clock-names : Must include the following entries:
@@ -37,6 +32,14 @@ Required properties:
   - adx
 - ranges : The bus address mapping for the configlink register bus.
   Can be empty since the mapping is 1:1.
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx0 .. rx<n>
+  - tx0 .. tx<n>
+  ... where n is:
+  Tegra30: 3
+  Tegra114, Tegra124: 9
 - #address-cells : For the configlink bus. Should be <1>;
 - #size-cells : For the configlink bus. Should be <1>.
 
@@ -62,6 +65,11 @@ ahub@70080000 {
 	reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2",
 		"i2s3", "i2s4", "dam0", "dam1", "dam2",
 		"spdif";
+	dmas = <&apbdma 1>, <&apbdma 1>;
+	       <&apbdma 2>, <&apbdma 2>;
+	       <&apbdma 3>, <&apbdma 3>;
+	       <&apbdma 4>, <&apbdma 4>;
+	dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2", "rx3", "tx3";
 	ranges;
 	#address-cells = <1>;
 	#size-cells = <1>;