Merge tag 'asoc-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.2

This is a pretty huge set of changes, it's been a pretty active release
all round but the big thing with this release is the Sound Open Firmware
changes from Intel, providing another DSP framework for use with the
DSPs in their SoCs.  This one works with the firmware of the same name
which is free software (unlike the previous DSP firmwares and framework)
and there has been some interest in adoption by other systems already so
hopefully we will see adoption by other vendors in the future.

Other highlights include:

 - Support for MCLK/sample rate ratio setting in the generic cards.
 - Support for pin switches in the generic cards.
 - A big set of improvements to the TLV320AIC32x4 drivers from Annaliese
   McDermond.
 - New drivers for Freescale audio mixers, several Intel machines,
   several Mediatek machines, Meson G12A, Sound Open Firmware and
   Spreadtrum compressed audio and DMA devices.

19 files changed, 238 insertions, 13 deletions

diff --git a/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt b/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt
index 4248b662deff..229ad1392cdc 100644
--- a/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt
@@ -1,5 +1,8 @@
 ADI AXI-I2S controller
 
+The core can be generated with transmit (playback), only receive
+(capture) or both directions enabled.
+
 Required properties:
  - compatible : Must be "adi,axi-i2s-1.00.a"
  - reg : Must contain I2S core's registers location and length
@@ -9,8 +12,8 @@ Required properties:
  - clock-names : "axi" for the clock to the AXI interface, "ref" for the sample
    rate reference clock.
  - dmas: Pairs of phandle and specifier for the DMA channels that are used by
-   the core. The core expects two dma channels, one for transmit and one for
-   receive.
+   the core. The core expects two dma channels if both transmit and receive are
+   enabled, one channel otherwise.
  - dma-names : "tx" for the transmit channel, "rx" for the receive channel.
 
 For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt
index 3dfc2515e5c6..4330fc9dca6d 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt
@@ -2,7 +2,9 @@
 
 Required properties:
 - compatible: 'amlogic,axg-toddr' or
-	      'amlogic,axg-frddr'
+	      'amlogic,axg-toddr' or
+	      'amlogic,g12a-frddr' or
+	      'amlogic,g12a-toddr'
 - reg: physical base address of the controller and length of memory
        mapped region.
 - interrupts: interrupt specifier for the fifo.
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
index 5672d0bc5b16..73f473a9365f 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-pdm.txt
@@ -1,7 +1,8 @@
 * Amlogic Audio PDM input
 
 Required properties:
-- compatible: 'amlogic,axg-pdm'
+- compatible: 'amlogic,axg-pdm' or
+	      'amlogic,g12a-pdm'
 - reg: physical base address of the controller and length of memory
        mapped region.
 - clocks: list of clock phandle, one for each entry clock-names.
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
index 2e6cb7d9b202..0b82504fa419 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
@@ -1,7 +1,8 @@
 * Amlogic Audio SPDIF Input
 
 Required properties:
-- compatible: 'amlogic,axg-spdifin'
+- compatible: 'amlogic,axg-spdifin' or
+	      'amlogic,g12a-spdifin'
 - interrupts: interrupt specifier for the spdif input.
 - clocks: list of clock phandle, one for each entry clock-names.
 - clock-names: should contain the following:
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt
index 521c38ad89e7..826152730508 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifout.txt
@@ -1,7 +1,8 @@
 * Amlogic Audio SPDIF Output
 
 Required properties:
-- compatible: 'amlogic,axg-spdifout'
+- compatible: 'amlogic,axg-spdifout' or
+	      'amlogic,g12a-spdifout'
 - clocks: list of clock phandle, one for each entry clock-names.
 - clock-names: should contain the following:
   * "pclk" : peripheral clock.
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
index 1c1b7490554e..3b94a715a0b9 100644
--- a/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-tdm-formatters.txt
@@ -2,7 +2,9 @@
 
 Required properties:
 - compatible: 'amlogic,axg-tdmin' or
-	      'amlogic,axg-tdmout'
+	      'amlogic,axg-tdmout' or
+	      'amlogic,g12a-tdmin' or
+	      'amlogic,g12a-tdmout'
 - reg: physical base address of the controller and length of memory
        mapped region.
 - clocks: list of clock phandle, one for each entry clock-names.
diff --git a/Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt
new file mode 100644
index 000000000000..41ae2699f07a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,lochnagar.txt
@@ -0,0 +1,39 @@
+Cirrus Logic Lochnagar Audio Development Board
+
+Lochnagar is an evaluation and development board for Cirrus Logic
+Smart CODEC and Amp devices. It allows the connection of most Cirrus
+Logic devices on mini-cards, as well as allowing connection of
+various application processor systems to provide a full evaluation
+platform.  Audio system topology, clocking and power can all be
+controlled through the Lochnagar, allowing the device under test
+to be used in a variety of possible use cases.
+
+This binding document describes the binding for the audio portion
+of the driver.
+
+This binding must be part of the Lochnagar MFD binding:
+  [4] ../mfd/cirrus,lochnagar.txt
+
+Required properties:
+
+  - compatible : One of the following strings:
+                 "cirrus,lochnagar2-soundcard"
+
+  - #sound-dai-cells : Must be set to 1.
+
+  - clocks : Contains an entry for each entry in clock-names.
+  - clock-names : Must include the following clocks:
+      "mclk" Master clock source for the sound card, should normally
+      be set to LOCHNAGAR_SOUNDCARD_MCLK provided by the Lochnagar
+      clock driver.
+
+Example:
+
+lochnagar-sc {
+	compatible = "cirrus,lochnagar2-soundcard";
+
+	#sound-dai-cells = <1>;
+
+	clocks = <&lochnagar_clk LOCHNAGAR_SOUNDCARD_MCLK>;
+	clock-names = "mclk";
+};
diff --git a/Documentation/devicetree/bindings/sound/cs42l51.txt b/Documentation/devicetree/bindings/sound/cs42l51.txt
index 4b5de33ce377..acbd68ddd2cb 100644
--- a/Documentation/devicetree/bindings/sound/cs42l51.txt
+++ b/Documentation/devicetree/bindings/sound/cs42l51.txt
@@ -1,6 +1,17 @@
 CS42L51 audio CODEC
 
+Required properties:
+
+  - compatible : "cirrus,cs42l51"
+
+  - reg : the I2C address of the device for I2C.
+
 Optional properties:
+  - VL-supply, VD-supply, VA-supply, VAHP-supply: power supplies for the device,
+    as covered in Documentation/devicetree/bindings/regulator/regulator.txt.
+
+  - reset-gpios : GPIO specification for the reset pin. If specified, it will be
+    deasserted before starting the communication with the codec.
 
   - clocks : a list of phandles + clock-specifiers, one for each entry in
     clock-names
@@ -14,4 +25,9 @@ cs42l51: cs42l51@4a {
 	reg = <0x4a>;
 	clocks = <&mclk_prov>;
 	clock-names = "MCLK";
+	VL-supply = <&reg_audio>;
+	VD-supply = <&reg_audio>;
+	VA-supply = <&reg_audio>;
+	VAHP-supply = <&reg_audio>;
+	reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
 };
diff --git a/Documentation/devicetree/bindings/sound/da7219.txt b/Documentation/devicetree/bindings/sound/da7219.txt
index e9d0baeb94e2..add1caf26ac2 100644
--- a/Documentation/devicetree/bindings/sound/da7219.txt
+++ b/Documentation/devicetree/bindings/sound/da7219.txt
@@ -23,8 +23,8 @@ Optional properties:
   interrupt is to be used to wake system, otherwise "irq" should be used.
 - wakeup-source: Flag to indicate this device can wake system (suspend/resume).
 
-- #clock-cells :  Should be set to '<0>', only one clock source provided;
-- clock-output-names : Name given for DAI clocks output;
+- #clock-cells :  Should be set to '<1>', two clock sources provided;
+- clock-output-names : Names given for DAI clock outputs (WCLK & BCLK);
 
 - clocks : phandle and clock specifier for codec MCLK.
 - clock-names : Clock name string for 'clocks' attribute, should be "mclk".
@@ -84,8 +84,8 @@ Example:
 		VDDMIC-supply = <&reg_audio>;
 		VDDIO-supply = <&reg_audio>;
 
-		#clock-cells = <0>;
-		clock-output-names = "dai-clks";
+		#clock-cells = <1>;
+		clock-output-names = "dai-wclk", "dai-bclk";
 
 		clocks = <&clks 201>;
 		clock-names = "mclk";
diff --git a/Documentation/devicetree/bindings/sound/fsl,audmix.txt b/Documentation/devicetree/bindings/sound/fsl,audmix.txt
new file mode 100644
index 000000000000..840b7e0d6a63
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/fsl,audmix.txt
@@ -0,0 +1,50 @@
+NXP Audio Mixer (AUDMIX).
+
+The Audio Mixer is a on-chip functional module that allows mixing of two
+audio streams into a single audio stream. Audio Mixer has two input serial
+audio interfaces. These are driven by two Synchronous Audio interface
+modules (SAI). Each input serial interface carries 8 audio channels in its
+frame in TDM manner. Mixer mixes audio samples of corresponding channels
+from two interfaces into a single sample. Before mixing, audio samples of
+two inputs can be attenuated based on configuration. The output of the
+Audio Mixer is also a serial audio interface. Like input interfaces it has
+the same TDM frame format. This output is used to drive the serial DAC TDM
+interface of audio codec and also sent to the external pins along with the
+receive path of normal audio SAI module for readback by the CPU.
+
+The output of Audio Mixer can be selected from any of the three streams
+ - serial audio input 1
+ - serial audio input 2
+ - mixed audio
+
+Mixing operation is independent of audio sample rate but the two audio
+input streams must have same audio sample rate with same number of channels
+in TDM frame to be eligible for mixing.
+
+Device driver required properties:
+=================================
+  - compatible		: Compatible list, contains "fsl,imx8qm-audmix"
+
+  - reg			: Offset and length of the register set for the device.
+
+  - clocks		: Must contain an entry for each entry in clock-names.
+
+  - clock-names		: Must include the "ipg" for register access.
+
+  - power-domains	: Must contain the phandle to AUDMIX power domain node
+
+  - dais		: Must contain a list of phandles to AUDMIX connected
+			  DAIs. The current implementation requires two phandles
+			  to SAI interfaces to be provided, the first SAI in the
+			  list being used to route the AUDMIX output.
+
+Device driver configuration example:
+======================================
+  audmix: audmix@59840000 {
+    compatible = "fsl,imx8qm-audmix";
+    reg = <0x0 0x59840000 0x0 0x10000>;
+    clocks = <&clk IMX8QXP_AUD_AUDMIX_IPG>;
+    clock-names = "ipg";
+    power-domains = <&pd_audmix>;
+    dais = <&sai4>, <&sai5>;
+  };
diff --git a/Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt b/Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt
new file mode 100644
index 000000000000..91ec83a6faed
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt
@@ -0,0 +1,43 @@
+* Microchip I2S Multi-Channel Controller
+
+Required properties:
+- compatible:     Should be "microchip,sam9x60-i2smcc".
+- reg:            Should be the physical base address of the controller and the
+                  length of memory mapped region.
+- interrupts:     Should contain the interrupt for the controller.
+- dmas:           Should be one per channel name listed in the dma-names property,
+                  as described in atmel-dma.txt and dma.txt files.
+- dma-names:      Identifier string for each DMA request line in the dmas property.
+		  Two dmas have to be defined, "tx" and "rx".
+- clocks:         Must contain an entry for each entry in clock-names.
+                  Please refer to clock-bindings.txt.
+- clock-names:    Should be one of each entry matching the clocks phandles list:
+                  - "pclk" (peripheral clock) Required.
+                  - "gclk" (generated clock) Optional (1).
+
+Optional properties:
+- pinctrl-0:      Should specify pin control groups used for this controller.
+- princtrl-names: Should contain only one value - "default".
+
+
+(1) : Only the peripheral clock is required. The generated clock is optional
+      and should be set mostly when Master Mode is required.
+
+Example:
+
+	i2s@f001c000 {
+		compatible = "microchip,sam9x60-i2smcc";
+		reg = <0xf001c000 0x100>;
+		interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
+		dmas = <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(36))>,
+		       <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(37))>;
+		dma-names = "tx", "rx";
+		clocks = <&i2s_clk>, <&i2s_gclk>;
+		clock-names = "pclk", "gclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2s_default>;
+	};
diff --git a/Documentation/devicetree/bindings/sound/mt8183-da7219-max98357.txt b/Documentation/devicetree/bindings/sound/mt8183-da7219-max98357.txt
new file mode 100644
index 000000000000..92ac86f83822
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8183-da7219-max98357.txt
@@ -0,0 +1,15 @@
+MT8183 with MT6358, DA7219 and MAX98357 CODECS
+
+Required properties:
+- compatible : "mediatek,mt8183_da7219_max98357"
+- mediatek,headset-codec: the phandles of da7219 codecs
+- mediatek,platform: the phandle of MT8183 ASoC platform
+
+Example:
+
+	sound {
+		compatible = "mediatek,mt8183_da7219_max98357";
+		mediatek,headset-codec = <&da7219>;
+		mediatek,platform = <&afe>;
+	};
+
diff --git a/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt b/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt
new file mode 100644
index 000000000000..d6d5207fa996
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt
@@ -0,0 +1,15 @@
+MT8183 with MT6358, TS3A227 and MAX98357 CODECS
+
+Required properties:
+- compatible : "mediatek,mt8183_mt6358_ts3a227_max98357"
+- mediatek,headset-codec: the phandles of ts3a227 codecs
+- mediatek,platform: the phandle of MT8183 ASoC platform
+
+Example:
+
+	sound {
+		compatible = "mediatek,mt8183_mt6358_ts3a227_max98357";
+		mediatek,headset-codec = <&ts3a227>;
+		mediatek,platform = <&afe>;
+	};
+
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index 648d43e1b1e9..5c52182f7dcf 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -266,6 +266,7 @@ Required properties:
 				    - "renesas,rcar_sound-r8a7743" (RZ/G1M)
 				    - "renesas,rcar_sound-r8a7744" (RZ/G1N)
 				    - "renesas,rcar_sound-r8a7745" (RZ/G1E)
+				    - "renesas,rcar_sound-r8a77470" (RZ/G1C)
 				    - "renesas,rcar_sound-r8a774a1" (RZ/G2M)
 				    - "renesas,rcar_sound-r8a774c0" (RZ/G2E)
 				    - "renesas,rcar_sound-r8a7778" (R-Car M1A)
@@ -282,7 +283,12 @@ Required properties:
 - reg				: Should contain the register physical address.
 				  required register is
 				   SRU/ADG/SSI      if generation1
-				   SRU/ADG/SSIU/SSI if generation2
+				   SRU/ADG/SSIU/SSI/AUDIO-DMAC-periperi if generation2/generation3
+				   Select extended AUDIO-DMAC-periperi address if SoC has it,
+				   otherwise select normal AUDIO-DMAC-periperi address.
+- reg-names			: Should contain the register names.
+				   scu/adg/ssi	if generation1
+				   scu/adg/ssiu/ssi/audmapp if generation2/generation3
 - rcar_sound,ssi		: Should contain SSI feature.
 				  The number of SSI subnode should be same as HW.
 				  see below for detail.
diff --git a/Documentation/devicetree/bindings/sound/rockchip,pdm.txt b/Documentation/devicetree/bindings/sound/rockchip,pdm.txt
index 47f164fbd1d7..98572a25122f 100644
--- a/Documentation/devicetree/bindings/sound/rockchip,pdm.txt
+++ b/Documentation/devicetree/bindings/sound/rockchip,pdm.txt
@@ -3,6 +3,9 @@
 Required properties:
 
 - compatible: "rockchip,pdm"
+  - "rockchip,px30-pdm"
+  - "rockchip,rk1808-pdm"
+  - "rockchip,rk3308-pdm"
 - reg: physical base address of the controller and length of memory mapped
   region.
 - dmas: DMA specifiers for rx dma. See the DMA client binding,
@@ -12,6 +15,8 @@ Required properties:
 - clock-names: should contain following:
    - "pdm_hclk": clock for PDM BUS
    - "pdm_clk" : clock for PDM controller
+- resets: a list of phandle + reset-specifer paris, one for each entry in reset-names.
+- reset-names: reset names, should include "pdm-m".
 - pinctrl-names: Must contain a "default" entry.
 - pinctrl-N: One property must exist for each entry in
 	     pinctrl-names. See ../pinctrl/pinctrl-bindings.txt
diff --git a/Documentation/devicetree/bindings/sound/rt5651.txt b/Documentation/devicetree/bindings/sound/rt5651.txt
index a41199a5cd79..56e736a1cba9 100644
--- a/Documentation/devicetree/bindings/sound/rt5651.txt
+++ b/Documentation/devicetree/bindings/sound/rt5651.txt
@@ -22,6 +22,11 @@ Optional properties:
   2: Use JD1_2 pin for jack-detect
   3: Use JD2 pin for jack-detect
 
+- realtek,jack-detect-not-inverted
+  bool. Normal jack-detect switches give an inverted (active-low) signal,
+  set this bool in the rare case you've a jack-detect switch which is not
+  inverted.
+
 - realtek,over-current-threshold-microamp
   u32, micbias over-current detection threshold in µA, valid values are
   600, 1500 and 2000µA.
diff --git a/Documentation/devicetree/bindings/sound/simple-amplifier.txt b/Documentation/devicetree/bindings/sound/simple-amplifier.txt
index 7182ac4f1e65..b1b097cc9b68 100644
--- a/Documentation/devicetree/bindings/sound/simple-amplifier.txt
+++ b/Documentation/devicetree/bindings/sound/simple-amplifier.txt
@@ -2,9 +2,9 @@ Simple Amplifier Audio Driver
 
 Required properties:
 - compatible : "dioo,dio2125" or "simple-audio-amplifier"
-- enable-gpios : the gpio connected to the enable pin of the simple amplifier
 
 Optional properties:
+- enable-gpios : the gpio connected to the enable pin of the simple amplifier
 - VCC-supply   : power supply for the device, as covered
                  in Documentation/devicetree/bindings/regulator/regulator.txt
 
diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt
index 4629c8f8a6b6..79954cd6e37b 100644
--- a/Documentation/devicetree/bindings/sound/simple-card.txt
+++ b/Documentation/devicetree/bindings/sound/simple-card.txt
@@ -24,6 +24,8 @@ Optional properties:
 					  a microphone is attached.
 - simple-audio-card,aux-devs		: List of phandles pointing to auxiliary devices, such
 					  as amplifiers, to be added to the sound card.
+- simple-audio-card,pin-switches	: List of strings containing the widget names for
+					  which pin switches must be created.
 
 Optional subnodes:
 
diff --git a/Documentation/devicetree/bindings/sound/sprd-mcdt.txt b/Documentation/devicetree/bindings/sound/sprd-mcdt.txt
new file mode 100644
index 000000000000..274ba0acbfd6
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/sprd-mcdt.txt
@@ -0,0 +1,19 @@
+Spreadtrum Multi-Channel Data Transfer Binding
+
+The Multi-channel data transfer controller is used for sound stream
+transmission between audio subsystem and other AP/CP subsystem. It
+supports 10 DAC channel and 10 ADC channel, and each channel can be
+configured with DMA mode or interrupt mode.
+
+Required properties:
+- compatible: Should be "sprd,sc9860-mcdt".
+- reg: Should contain registers address and length.
+- interrupts: Should contain one interrupt shared by all channel.
+
+Example:
+
+mcdt@41490000 {
+	compatible = "sprd,sc9860-mcdt";
+	reg = <0 0x41490000 0 0x170>;
+	interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+};