Merge tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:

 - Convert various DT (non-binding) doc files to ReST

 - Various improvements to device link code

 - Fix __of_attach_node_sysfs refcounting bug

 - Add support for 'memory-region-names' with reserved-memory binding

 - Vendor prefixes for Protonic Holland, BeagleBoard.org, Alps, Check
   Point, Würth Elektronik, U-Boot, Vaisala, Baikal Electronics,
   Shanghai Awinic Technology Co., MikroTik, Silex Insight

 - A bunch more binding conversions to DT schema. Only 3K to go.

 - Add a minimum version check for schema tools

 - Treewide dropping of 'allOf' usage with schema references. Not needed
   in new json-schema spec.

 - Some formatting clean-ups of schemas

* tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (194 commits)
  dt-bindings: clock: Add documentation for X1830 bindings.
  dt-bindings: mailbox: Convert imx mu to json-schema
  dt-bindings: power: Convert imx gpcv2 to json-schema
  dt-bindings: power: Convert imx gpc to json-schema
  dt-bindings: Merge gpio-usb-b-connector with usb-connector
  dt-bindings: timer: renesas: cmt: Convert to json-schema
  dt-bindings: clock: Convert i.MX8QXP LPCG to json-schema
  dt-bindings: timer: Convert i.MX GPT to json-schema
  dt-bindings: thermal: rcar-thermal: Add device tree support for r8a7742
  dt-bindings: serial: Add binding for UART pin swap
  dt-bindings: geni-se: Add interconnect binding for GENI QUP
  dt-bindings: geni-se: Convert QUP geni-se bindings to YAML
  dt-bindings: vendor-prefixes: Add Silex Insight vendor prefix
  dt-bindings: input: touchscreen: edt-ft5x06: change reg property
  dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver
  dt-bindings: timer: renesas: mtu2: Convert to json-schema
  of/fdt: Remove redundant kbasename function call
  dt-bindings: clock: Convert i.MX1 clock to json-schema
  dt-bindings: clock: Convert i.MX21 clock to json-schema
  dt-bindings: clock: Convert i.MX25 clock to json-schema
  ...

1 files changed, 0 insertions, 60 deletions

diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
deleted file mode 100644
index 2993fa720195..000000000000
--- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-* DT bindings for Renesas R-Car Gen3 Thermal Sensor driver
-
-On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal
-sensors (THS) which are the analog circuits for measuring temperature (Tj)
-inside the LSI.
-
-Required properties:
-- compatible		: "renesas,<soctype>-thermal",
-			  Examples with soctypes are:
-			    - "renesas,r8a774a1-thermal" (RZ/G2M)
-			    - "renesas,r8a774b1-thermal" (RZ/G2N)
-			    - "renesas,r8a7795-thermal" (R-Car H3)
-			    - "renesas,r8a7796-thermal" (R-Car M3-W)
-			    - "renesas,r8a77961-thermal" (R-Car M3-W+)
-			    - "renesas,r8a77965-thermal" (R-Car M3-N)
-			    - "renesas,r8a77980-thermal" (R-Car V3H)
-- reg			: Address ranges of the thermal registers. Each sensor
-			  needs one address range. Sorting must be done in
-			  increasing order according to datasheet, i.e.
-			  TSC1, TSC2, ...
-- clocks		: Must contain a reference to the functional clock.
-- #thermal-sensor-cells : must be <1>.
-
-Optional properties:
-
-- interrupts		: interrupts routed to the TSC (must be 3).
-- power-domain		: Must contain a reference to the power domain. This
-			  property is mandatory if the thermal sensor instance
-			  is part of a controllable power domain.
-
-Example:
-
-	tsc: thermal@e6198000 {
-		compatible = "renesas,r8a7795-thermal";
-		reg = <0 0xe6198000 0 0x100>,
-		      <0 0xe61a0000 0 0x100>,
-		      <0 0xe61a8000 0 0x100>;
-		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cpg CPG_MOD 522>;
-		power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-		#thermal-sensor-cells = <1>;
-	};
-
-	thermal-zones {
-		sensor_thermal1: sensor-thermal1 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-			thermal-sensors = <&tsc 0>;
-
-			trips {
-				sensor1_crit: sensor1-crit {
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-	};