summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/thermal
diff options
context:
space:
mode:
authorPeter Griffin <peter.griffin@linaro.org>2016-09-14 15:27:00 +0200
committerPatrice Chotard <patrice.chotard@st.com>2016-10-18 10:07:30 +0200
commitfeada609a7a3e32954b060bc8448f25d7fd430bf (patch)
treecb46a3b2b3c172c2fafee3c0644a4cfefae15c5f /Documentation/devicetree/bindings/thermal
parenteae865a0cc061f89b1ec89a38f957b07e7eac86f (diff)
thermal: sti: Remove obsolete platforms from the DT doc.
STiH415/6 SoC's are being removed from the kernel. This patch removes the compatibles from the dt doc and also updates the example to a supported platform. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Cc: <rui.zhang@intel.com> Cc: <edubezval@gmail.com> Cc: <robh+dt@kernel.org> Acked-by: Rob Herring <robh@kernel.org>
Diffstat (limited to 'Documentation/devicetree/bindings/thermal')
-rw-r--r--Documentation/devicetree/bindings/thermal/st-thermal.txt28
1 files changed, 9 insertions, 19 deletions
diff --git a/Documentation/devicetree/bindings/thermal/st-thermal.txt b/Documentation/devicetree/bindings/thermal/st-thermal.txt
index 3b9251b4a145..a2f939137e35 100644
--- a/Documentation/devicetree/bindings/thermal/st-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/st-thermal.txt
@@ -3,17 +3,8 @@ Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs.
Required parameters:
-------------------
-compatible : st,<SoC>-<module>-thermal; should be one of:
- "st,stih415-sas-thermal",
- "st,stih415-mpe-thermal",
- "st,stih416-sas-thermal"
- "st,stih416-mpe-thermal"
- "st,stid127-thermal" or
- "st,stih407-thermal"
- according to the SoC type (stih415, stih416, stid127, stih407)
- and module type (sas or mpe). On stid127 & stih407 there is only
- one die/module, so there is no module type in the compatible
- string.
+compatible : Should be "st,stih407-thermal"
+
clock-names : Should be "thermal".
See: Documentation/devicetree/bindings/resource-names.txt
clocks : Phandle of the clock used by the thermal sensor.
@@ -25,18 +16,17 @@ Optional parameters:
reg : For non-sysconf based sensors, this should be the physical base
address and length of the sensor's registers.
interrupts : Standard way to define interrupt number.
- Interrupt is mandatory to be defined when compatible is
- "stih416-mpe-thermal".
NB: For thermal sensor's for which no interrupt has been
defined, a polling delay of 1000ms will be used to read the
temperature from device.
Example:
- temp1@fdfe8000 {
- compatible = "st,stih416-mpe-thermal";
- reg = <0xfdfe8000 0x10>;
- clock-names = "thermal";
- clocks = <&clk_m_mpethsens>;
- interrupts = <GIC_SPI 23 IRQ_TYPE_NONE>;
+ temp0@91a0000 {
+ compatible = "st,stih407-thermal";
+ reg = <0x91a0000 0x28>;
+ clock-names = "thermal";
+ clocks = <&CLK_SYSIN>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
+ st,passive_cooling_temp = <110>;
};