Merge mainline/master into arm/fixes

This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 38 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
new file mode 100644
index 000000000000..25780e945b15
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt
@@ -0,0 +1,38 @@
+TI HD3SS3220 TypeC DRP Port Controller.
+
+Required properties:
+ - compatible: Must be "ti,hd3ss3220".
+ - reg: I2C slave address, must be 0x47 or 0x67 based on ADDR pin.
+ - interrupts: An interrupt specifier.
+
+Required sub-node:
+ - connector: The "usb-c-connector" attached to the hd3ss3220 chip. The
+   bindings of the connector node are specified in:
+
+	Documentation/devicetree/bindings/connector/usb-connector.txt
+
+Example:
+hd3ss3220@47 {
+	compatible = "ti,hd3ss3220";
+	reg = <0x47>;
+	interrupt-parent = <&gpio6>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+	connector {
+		compatible = "usb-c-connector";
+		label = "USB-C";
+		data-role = "dual";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				hd3ss3220_ep: endpoint {
+					remote-endpoint = <&usb3_role_switch>;
+				};
+			};
+		};
+	};
+};