dt-bindings: usb: Convert the generic OHCI binding to YAML

The generic OHCI binding is used by many controllers that are using the
OHCI spec.

Convert that binding to a YAML description to enable the validation on all
the nodes using that binding.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 0 insertions, 35 deletions

diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
deleted file mode 100644
index aaaa5255c972..000000000000
--- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-USB OHCI controllers
-
-Required properties:
-- compatible : "generic-ohci"
-- reg : ohci controller register range (address and length)
-- interrupts : ohci controller interrupt
-
-Optional properties:
-- big-endian-regs : boolean, set this for hcds with big-endian registers
-- big-endian-desc : boolean, set this for hcds with big-endian descriptors
-- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
-- no-big-frame-no : boolean, set if frame_no lives in bits [15:0] of HCCA
-- remote-wakeup-connected: remote wakeup is wired on the platform
-- num-ports : u32, to override the detected port count
-- clocks : a list of phandle + clock specifier pairs. In case of Renesas
-	   R-Car Gen3 SoCs:
-	   - if a host only channel: first clock should be host.
-	   - if a USB DRD channel: first clock should be host and second one
-				   should be peripheral.
-- phys : see usb-hcd.txt in the current directory
-- resets : a list of phandle + reset specifier pairs
-
-additionally the properties from usb-hcd.txt (in the current directory) are
-supported.
-
-Example:
-
-	ohci0: usb@1c14400 {
-		compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
-		reg = <0x01c14400 0x100>;
-		interrupts = <64>;
-		clocks = <&usb_clk 6>, <&ahb_gates 2>;
-		phys = <&usbphy 1>;
-		phy-names = "usb";
-	};