diff options
author | Chunfeng Yun <chunfeng.yun@mediatek.com> | 2019-08-29 17:22:30 +0800 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2019-09-03 16:00:39 +0200 |
commit | f651c73e71f53f65e9846677d79d8e120452b59f (patch) | |
tree | f66e9e876eefab517c26ace1b749272d6fe07674 /Documentation/devicetree | |
parent | 6b68240d7c54f314da720d2dbb063d5d41e5d10c (diff) |
dt-bindings: usb: add binding for USB GPIO based connection detection driver
It's used to support dual role switch via GPIO when use Type-B
receptacle, typically the USB ID pin is connected to an input
GPIO, and also used to enable/disable device when the USB Vbus
pin is connected to an input GPIO.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1567070558-29417-4-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'Documentation/devicetree')
-rw-r--r-- | Documentation/devicetree/bindings/usb/usb-conn-gpio.txt | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt b/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt new file mode 100644 index 000000000000..3d05ae56cb0d --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt @@ -0,0 +1,30 @@ +USB GPIO Based Connection Detection + +This is typically used to switch dual role mode from the USB ID pin connected +to an input GPIO, and also used to enable/disable device mode from the USB +Vbus pin connected to an input GPIO. + +Required properties: +- compatible : should include "gpio-usb-b-connector" and "usb-b-connector". +- id-gpios, vbus-gpios : input gpios, either one of them must be present, + and both can be present as well. + see connector/usb-connector.txt + +Optional properties: +- vbus-supply : can be present if needed when supports dual role mode. + see connector/usb-connector.txt + +- Sub-nodes: + - port : can be present. + see graph.txt + +Example: + +&mtu3 { + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + type = "micro"; + id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>; + vbus-supply = <&usb_p0_vbus>; + }; +}; |