Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull second round of KVM changes from Paolo Bonzini:
 "Here are the PPC and ARM changes for KVM, which I separated because
  they had small conflicts (respectively within KVM documentation, and
  with 3.16-rc changes).  Since they were all within the subsystem, I
  took care of them.

  Stephen Rothwell reported some snags in PPC builds, but they are all
  fixed now; the latest linux-next report was clean.

  New features for ARM include:
   - KVM VGIC v2 emulation on GICv3 hardware
   - Big-Endian support for arm/arm64 (guest and host)
   - Debug Architecture support for arm64 (arm32 is on Christoffer's todo list)

  And for PPC:
   - Book3S: Good number of LE host fixes, enable HV on LE
   - Book3S HV: Add in-guest debug support

  This release drops support for KVM on the PPC440.  As a result, the
  PPC merge removes more lines than it adds.  :)

  I also included an x86 change, since Davidlohr tied it to an
  independent bug report and the reporter quickly provided a Tested-by;
  there was no reason to wait for -rc2"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (122 commits)
  KVM: Move more code under CONFIG_HAVE_KVM_IRQFD
  KVM: nVMX: fix "acknowledge interrupt on exit" when APICv is in use
  KVM: nVMX: Fix nested vmexit ack intr before load vmcs01
  KVM: PPC: Enable IRQFD support for the XICS interrupt controller
  KVM: Give IRQFD its own separate enabling Kconfig option
  KVM: Move irq notifier implementation into eventfd.c
  KVM: Move all accesses to kvm::irq_routing into irqchip.c
  KVM: irqchip: Provide and use accessors for irq routing table
  KVM: Don't keep reference to irq routing table in irqfd struct
  KVM: PPC: drop duplicate tracepoint
  arm64: KVM: fix 64bit CP15 VM access for 32bit guests
  KVM: arm64: GICv3: mandate page-aligned GICV region
  arm64: KVM: GICv3: move system register access to msr_s/mrs_s
  KVM: PPC: PR: Handle FSCR feature deselects
  KVM: PPC: HV: Remove generic instruction emulation
  KVM: PPC: BOOKEHV: rename e500hv_spr to bookehv_spr
  KVM: PPC: Remove DCR handling
  KVM: PPC: Expose helper functions for data/inst faults
  KVM: PPC: Separate loadstore emulation from priv emulation
  KVM: PPC: Handle magic page in kvmppc_ld/st
  ...

1 files changed, 79 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/gic-v3.txt b/Documentation/devicetree/bindings/arm/gic-v3.txt
new file mode 100644
index 000000000000..33cd05e6c125
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/gic-v3.txt
@@ -0,0 +1,79 @@
+* ARM Generic Interrupt Controller, version 3
+
+AArch64 SMP cores are often associated with a GICv3, providing Private
+Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI),
+Software Generated Interrupts (SGI), and Locality-specific Peripheral
+Interrupts (LPI).
+
+Main node required properties:
+
+- compatible : should at least contain  "arm,gic-v3".
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. Must be a single cell with a value of at least 3.
+
+  The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
+  interrupts. Other values are reserved for future use.
+
+  The 2nd cell contains the interrupt number for the interrupt type.
+  SPI interrupts are in the range [0-987]. PPI interrupts are in the
+  range [0-15].
+
+  The 3rd cell is the flags, encoded as follows:
+	bits[3:0] trigger type and level flags.
+		1 = edge triggered
+		4 = level triggered
+
+  Cells 4 and beyond are reserved for future use. When the 1st cell
+  has a value of 0 or 1, cells 4 and beyond act as padding, and may be
+  ignored. It is recommended that padding cells have a value of 0.
+
+- reg : Specifies base physical address(s) and size of the GIC
+  registers, in the following order:
+  - GIC Distributor interface (GICD)
+  - GIC Redistributors (GICR), one range per redistributor region
+  - GIC CPU interface (GICC)
+  - GIC Hypervisor interface (GICH)
+  - GIC Virtual CPU interface (GICV)
+
+  GICC, GICH and GICV are optional.
+
+- interrupts : Interrupt source of the VGIC maintenance interrupt.
+
+Optional
+
+- redistributor-stride : If using padding pages, specifies the stride
+  of consecutive redistributors. Must be a multiple of 64kB.
+
+- #redistributor-regions: The number of independent contiguous regions
+  occupied by the redistributors. Required if more than one such
+  region is present.
+
+Examples:
+
+	gic: interrupt-controller@2cf00000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x0 0x2f000000 0 0x10000>,	// GICD
+		      <0x0 0x2f100000 0 0x200000>,	// GICR
+		      <0x0 0x2c000000 0 0x2000>,	// GICC
+		      <0x0 0x2c010000 0 0x2000>,	// GICH
+		      <0x0 0x2c020000 0 0x2000>;	// GICV
+		interrupts = <1 9 4>;
+	};
+
+	gic: interrupt-controller@2c010000 {
+		compatible = "arm,gic-v3";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		redistributor-stride = <0x0 0x40000>;	// 256kB stride
+		#redistributor-regions = <2>;
+		reg = <0x0 0x2c010000 0 0x10000>,	// GICD
+		      <0x0 0x2d000000 0 0x800000>,	// GICR 1: CPUs 0-31
+		      <0x0 0x2e000000 0 0x800000>;	// GICR 2: CPUs 32-63
+		      <0x0 0x2c040000 0 0x2000>,	// GICC
+		      <0x0 0x2c060000 0 0x2000>,	// GICH
+		      <0x0 0x2c080000 0 0x2000>;	// GICV
+		interrupts = <1 9 4>;
+	};