Merge tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - move pci_uevent_ers() out of pci.h (Michael Ellerman)

 - skip ASPM common clock warning if BIOS already configured it (Sinan
   Kaya)

 - fix ASPM Coverity warning about threshold_ns (Gustavo A. R. Silva)

 - remove last user of pci_get_bus_and_slot() and the function itself
   (Sinan Kaya)

 - add decoding for 16 GT/s link speed (Jay Fang)

 - add interfaces to get max link speed and width (Tal Gilboa)

 - add pcie_bandwidth_capable() to compute max supported link bandwidth
   (Tal Gilboa)

 - add pcie_bandwidth_available() to compute bandwidth available to
   device (Tal Gilboa)

 - add pcie_print_link_status() to log link speed and whether it's
   limited (Tal Gilboa)

 - use PCI core interfaces to report when device performance may be
   limited by its slot instead of doing it in each driver (Tal Gilboa)

 - fix possible cpqphp NULL pointer dereference (Shawn Lin)

 - rescan more of the hierarchy on ACPI hotplug to fix Thunderbolt/xHCI
   hotplug (Mika Westerberg)

 - add support for PCI I/O port space that's neither directly accessible
   via CPU in/out instructions nor directly mapped into CPU physical
   memory space. This is fairly intrusive and includes minor changes to
   interfaces used for I/O space on most platforms (Zhichang Yuan, John
   Garry)

 - add support for HiSilicon Hip06/Hip07 LPC I/O space (Zhichang Yuan,
   John Garry)

 - use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas)

 - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr()
   (Shawn Lin)

 - report quirk timings with dev_info (Bjorn Helgaas)

 - report quirks that take longer than 10ms (Bjorn Helgaas)

 - add and use Altera Vendor ID (Johannes Thumshirn)

 - tidy Makefiles and comments (Bjorn Helgaas)

 - don't set up INTx if MSI or MSI-X is enabled to align cris, frv,
   ia64, and mn10300 with x86 (Bjorn Helgaas)

 - move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick
   Lawler)

 - merge pcieport_if.h into portdrv.h (Bjorn Helgaas)

 - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn
   Helgaas)

 - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas)

 - remove portdrv link order dependency (Bjorn Helgaas)

 - remove support for unused VC portdrv service (Bjorn Helgaas)

 - simplify portdrv feature permission checking (Bjorn Helgaas)

 - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn
   Helgaas)

 - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas)

 - use cached AER capability offset (Frederick Lawler)

 - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg)

 - rename pcie-dpc.c to dpc.c (Bjorn Helgaas)

 - use generic pci_mmap_resource_range() instead of powerpc and xtensa
   arch-specific versions (David Woodhouse)

 - support arbitrary PCI host bridge offsets on sparc (Yinghai Lu)

 - remove System and Video ROM reservations on sparc (Bjorn Helgaas)

 - probe for device reset support during enumeration instead of runtime
   (Bjorn Helgaas)

 - add ACS quirk for Ampere (née APM) root ports (Feng Kan)

 - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas
   Vincent-Cross)

 - protect device restore with device lock (Sinan Kaya)

 - handle failure of FLR gracefully (Sinan Kaya)

 - handle CRS (config retry status) after device resets (Sinan Kaya)

 - skip various config reads for SR-IOV VFs as an optimization
   (KarimAllah Ahmed)

 - consolidate VPD code in vpd.c (Bjorn Helgaas)

 - add Tegra dependency on PCI_MSI_IRQ_DOMAIN (Arnd Bergmann)

 - add DT support for R-Car r8a7743 (Biju Das)

 - fix a PCI_EJECT vs PCI_BUS_RELATIONS race condition in Hyper-V host
   bridge driver that causes a general protection fault (Dexuan Cui)

 - fix Hyper-V host bridge hang in MSI setup on 1-vCPU VMs with SR-IOV
   (Dexuan Cui)

 - fix Hyper-V host bridge hang when ejecting a VF before setting up MSI
   (Dexuan Cui)

 - make several structures static (Fengguang Wu)

 - increase number of MSI IRQs supported by Synopsys DesignWare bridges
   from 32 to 256 (Gustavo Pimentel)

 - implemented multiplexed IRQ domain API and remove obsolete MSI IRQ
   API from DesignWare drivers (Gustavo Pimentel)

 - add Tegra power management support (Manikanta Maddireddy)

 - add Tegra loadable module support (Manikanta Maddireddy)

 - handle 64-bit BARs correctly in endpoint support (Niklas Cassel)

 - support optional regulator for HiSilicon STB (Shawn Guo)

 - use regulator bulk API for Qualcomm apq8064 (Srinivas Kandagatla)

 - support power supplies for Qualcomm msm8996 (Srinivas Kandagatla)

* tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (123 commits)
  MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver
  HISI LPC: Add ACPI support
  ACPI / scan: Do not enumerate Indirect IO host children
  ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use
  HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings
  of: Add missing I/O range exception for indirect-IO devices
  PCI: Apply the new generic I/O management on PCI IO hosts
  PCI: Add fwnode handler as input param of pci_register_io_range()
  PCI: Remove __weak tag from pci_register_io_range()
  MAINTAINERS: Add missing /drivers/pci/cadence directory entry
  fm10k: Report PCIe link properties with pcie_print_link_status()
  net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth
  net/mlx5: Report PCIe link properties with pcie_print_link_status()
  net/mlx4_core: Report PCIe link properties with pcie_print_link_status()
  PCI: Add pcie_print_link_status() to log link speed and whether it's limited
  PCI: Add pcie_bandwidth_available() to compute bandwidth available to device
  misc: pci_endpoint_test: Handle 64-bit BARs properly
  PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly
  PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing
  PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar
  ...

5 files changed, 45 insertions, 10 deletions

diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
new file mode 100644
index 000000000000..10bd35f9207f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon-low-pin-count.txt
@@ -0,0 +1,33 @@
+Hisilicon Hip06 Low Pin Count device
+  Hisilicon Hip06 SoCs implement a Low Pin Count (LPC) controller, which
+  provides I/O access to some legacy ISA devices.
+  Hip06 is based on arm64 architecture where there is no I/O space. So, the
+  I/O ports here are not CPU addresses, and there is no 'ranges' property in
+  LPC device node.
+
+Required properties:
+- compatible:  value should be as follows:
+	(a) "hisilicon,hip06-lpc"
+	(b) "hisilicon,hip07-lpc"
+- #address-cells: must be 2 which stick to the ISA/EISA binding doc.
+- #size-cells: must be 1 which stick to the ISA/EISA binding doc.
+- reg: base memory range where the LPC register set is mapped.
+
+Note:
+  The node name before '@' must be "isa" to represent the binding stick to the
+  ISA/EISA binding specification.
+
+Example:
+
+isa@a01b0000 {
+	compatible = "hisilicon,hip06-lpc";
+	#address-cells = <2>;
+	#size-cells = <1>;
+	reg = <0x0 0xa01b0000 0x0 0x1000>;
+
+	ipmi0: bt@e4 {
+		compatible = "ipmi-bt";
+		device_type = "ipmi";
+		reg = <0x01 0xe4 0x04>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
index c84bc027930b..760b4d740616 100644
--- a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
@@ -34,6 +34,7 @@ Required properties
 
 Optional properties:
 - reset-gpios: The gpio to generate PCIe PERST# assert and deassert signal.
+- vpcie-supply: The regulator in charge of PCIe port power.
 - phys: List of phandle and phy mode specifier, should be 0.
 - phy-names: Must be "phy".
 
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
index 3a6ce55dd310..20227a875ac8 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
@@ -78,7 +78,7 @@ Examples for MT7623:
 		#reset-cells = <1>;
 	};
 
-	pcie: pcie-controller@1a140000 {
+	pcie: pcie@1a140000 {
 		compatible = "mediatek,mt7623-pcie";
 		device_type = "pci";
 		reg = <0 0x1a140000 0 0x1000>, /* PCIe shared registers */
@@ -111,7 +111,6 @@ Examples for MT7623:
 			  0x83000000 0 0x60000000 0 0x60000000 0 0x10000000>;	/* memory space */
 
 		pcie@0,0 {
-			device_type = "pci";
 			reg = <0x0000 0 0 0 0>;
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -123,7 +122,6 @@ Examples for MT7623:
 		};
 
 		pcie@1,0 {
-			device_type = "pci";
 			reg = <0x0800 0 0 0 0>;
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -135,7 +133,6 @@ Examples for MT7623:
 		};
 
 		pcie@2,0 {
-			device_type = "pci";
 			reg = <0x1000 0 0 0 0>;
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -148,6 +145,7 @@ Examples for MT7623:
 	};
 
 Examples for MT2712:
+
 	pcie: pcie@11700000 {
 		compatible = "mediatek,mt2712-pcie";
 		device_type = "pci";
@@ -169,7 +167,6 @@ Examples for MT2712:
 		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x10000000>;
 
 		pcie0: pcie@0,0 {
-			device_type = "pci";
 			reg = <0x0000 0 0 0 0>;
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -189,7 +186,6 @@ Examples for MT2712:
 		};
 
 		pcie1: pcie@1,0 {
-			device_type = "pci";
 			reg = <0x0800 0 0 0 0>;
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -210,6 +206,7 @@ Examples for MT2712:
 	};
 
 Examples for MT7622:
+
 	pcie: pcie@1a140000 {
 		compatible = "mediatek,mt7622-pcie";
 		device_type = "pci";
@@ -243,7 +240,6 @@ Examples for MT7622:
 		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x10000000>;
 
 		pcie0: pcie@0,0 {
-			device_type = "pci";
 			reg = <0x0000 0 0 0 0>;
 			#address-cells = <3>;
 			#size-cells = <2>;
@@ -263,7 +259,6 @@ Examples for MT7622:
 		};
 
 		pcie1: pcie@1,0 {
-			device_type = "pci";
 			reg = <0x0800 0 0 0 0>;
 			#address-cells = <3>;
 			#size-cells = <2>;
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
index 3c9d321b3d3b..1fd703bd73e0 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -189,6 +189,10 @@
 	Value type: <phandle>
 	Definition: A phandle to the analog power supply for IC which generates
 		    reference clock
+- vddpe-3v3-supply:
+	Usage: optional
+	Value type: <phandle>
+	Definition: A phandle to the PCIe endpoint power supply
 
 - phys:
 	Usage: required for apq8084
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
index 76ba3a61d1a3..1fb614e615da 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
@@ -1,13 +1,15 @@
 * Renesas R-Car PCIe interface
 
 Required properties:
-compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
+compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC;
+	    "renesas,pcie-r8a7779" for the R8A7779 SoC;
 	    "renesas,pcie-r8a7790" for the R8A7790 SoC;
 	    "renesas,pcie-r8a7791" for the R8A7791 SoC;
 	    "renesas,pcie-r8a7793" for the R8A7793 SoC;
 	    "renesas,pcie-r8a7795" for the R8A7795 SoC;
 	    "renesas,pcie-r8a7796" for the R8A7796 SoC;
-	    "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device.
+	    "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 or
+				     RZ/G1 compatible device.
 	    "renesas,pcie-rcar-gen3" for a generic R-Car Gen3 compatible device.
 
 	    When compatible with the generic version, nodes must list the