Merge tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v4.15 kernel cycle:

  Core:

   - The pin control Kconfig entry PINCTRL is now turned into a
     menuconfig option. This obviously has the implication of making the
     subsystem menu visible in menuconfig. This is happening because of
     two things:

      (a) Intel have started to deploy and depend on pin controllers in
          a way that is affecting users directly. This happens on the
          highly integrated laptop chipsets named after geographical
          places: baytrail, broxton, cannonlake, cedarfork, cherryview,
          denverton, geminilake, lewisburg, merrifield, sunrisepoint...
          It started a while back and now it is ever more evident that
          this is crucial infrastructure for x86 laptops and not an
          embedded obscurity anymore. Users need to be aware.

      (b) Pin control expanders on I2C and SPI that are arch-agnostic.
          Currently Semtech SX150X and Microchip MCP28x08 but more are
          expected. Users will have to be able to configure these in
          directly for their set-up.

   - Just go and select GPIOLIB now that we made sure that GPIOLIB is a
     very vanilla subsystem. Do not depend on it, if we need it, select
     it.

   - Exposing the pin control subsystem in menuconfig uncovered a bunch
     of obscure bugs that are now hopefully fixed, all more or less
     pertaining to Blackfin.

   - Unified namespace for cross-calls between pin control and GPIO.

   - New support for clock skew/delay generic DT bindings and generic
     pin config options for this.

   - Minor documentation improvements.

  Various:

   - The Renesas SH-PFC pin controller has evolved a lot. It seems
     Renesas are churning out new SoCs by the minute.

   - A bunch of non-critical fixes for the Rockchip driver.

   - Improve the use of library functions instead of open coding.

   - Support the MCP28018 variant in the MCP28x08 driver.

   - Static constifying"

* tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits)
  pinctrl: gemini: Fix missing pad descriptions
  pinctrl: Add some depends on HAS_IOMEM
  pinctrl: samsung/s3c24xx: add CONFIG_OF dependency
  pinctrl: gemini: Fix GMAC groups
  pinctrl: qcom: spmi-gpio: Add pmi8994 gpio support
  pinctrl: ti-iodelay: remove redundant unused variable dev
  pinctrl: max77620: Use common error handling code in max77620_pinconf_set()
  pinctrl: gemini: Implement clock skew/delay config
  pinctrl: gemini: Use generic DT parser
  pinctrl: Add skew-delay pin config and bindings
  pinctrl: armada-37xx: Add edge both type gpio irq support
  pinctrl: uniphier: remove eMMC hardware reset pin-mux
  pinctrl: rockchip: Add iomux-route switching support for rk3288
  pinctrl: intel: Add Intel Cedar Fork PCH pin controller support
  pinctrl: intel: Make offset to interrupt status register configurable
  pinctrl: sunxi: Enforce the strict mode by default
  pinctrl: sunxi: Disable strict mode for old pinctrl drivers
  pinctrl: sunxi: Introduce the strict flag
  pinctrl: sh-pfc: Save/restore registers for PSCI system suspend
  pinctrl: sh-pfc: r8a7796: Use generic IOCTRL register description
  ...

6 files changed, 79 insertions, 6 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
index 61466c58faae..d857b67fab72 100644
--- a/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt
@@ -9,8 +9,14 @@ The pin controller node must be a subnode of the system controller node.
 Required properties:
 - compatible: "cortina,gemini-pinctrl"
 
-Subnodes of the pin controller contain pin control multiplexing set-up.
-Please refer to pinctrl-bindings.txt for generic pin multiplexing nodes.
+Subnodes of the pin controller contain pin control multiplexing set-up
+and pin configuration of individual pins.
+
+Please refer to pinctrl-bindings.txt for generic pin multiplexing nodes
+and generic pin config nodes.
+
+Supported configurations:
+- skew-delay is supported on the Ethernet pins
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
index f64060908d5a..c7c088d2dd50 100644
--- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
@@ -97,8 +97,8 @@ group spi_quad
  - pins 15-16
  - functions spi, gpio
 
-group uart_2
- - pins 9-10
+group uart2
+ - pins 9-10 and 18-19
  - functions uart, gpio
 
 Available groups and functions for the South bridge:
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
index 4483cc31e531..ad9bbbba36e9 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
@@ -271,6 +271,10 @@ output-high		- set the pin to output mode with high level
 sleep-hardware-state	- indicate this is sleep related state which will be programmed
 			  into the registers for the sleep state.
 slew-rate		- set the slew rate
+skew-delay		- this affects the expected clock skew on input pins
+			  and the delay before latching a value to an output
+			  pin. Typically indicates how many double-inverters are
+			  used to delay the signal.
 
 For example:
 
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
index c934106b10aa..9c451c20dda4 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
@@ -13,6 +13,7 @@ Required properties:
     - "microchip,mcp23s18" for 16 GPIO SPI version
     - "microchip,mcp23008" for  8 GPIO I2C version or
     - "microchip,mcp23017" for 16 GPIO I2C version of the chip
+    - "microchip,mcp23018" for 16 GPIO I2C version
     NOTE: Do not use the old mcp prefix any more. It is deprecated and will be
     removed.
 - #gpio-cells : Should be two.
@@ -81,3 +82,61 @@ gpiom1: gpio@0 {
         reg = <0>;
         spi-max-frequency = <1000000>;
 };
+
+Pull-up configuration
+=====================
+
+If pins are used as output, they can also be configured with pull-ups. This is
+done with pinctrl.
+
+Please refer file <devicetree/bindings/pinctrl/pinctrl-bindings.txt>
+for details of the common pinctrl bindings used by client devices,
+including the meaning of the phrase "pin configuration node".
+
+Optional Pinmux properties:
+--------------------------
+Following properties are required if default setting of pins are required
+at boot.
+- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>.
+- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per
+		<pinctrl-binding.txt>.
+
+The pin configurations are defined as child of the pinctrl states node. Each
+sub-node have following properties:
+
+Required properties:
+------------------
+- pins: List of pins. Valid values of pins properties are:
+		      gpio0 ... gpio7 for the devices with 8 GPIO pins and
+		      gpio0 ... gpio15 for the devices with 16 GPIO pins.
+
+Optional properties:
+-------------------
+The following optional property is defined in the pinmux DT binding document
+<pinctrl-bindings.txt>. Absence of this property will leave the configuration
+in its default state.
+	bias-pull-up
+
+Example with pinctrl to pull-up output pins:
+gpio21: gpio@21 {
+	compatible = "microchip,mcp23017";
+	gpio-controller;
+	#gpio-cells = <0x2>;
+	reg = <0x21>;
+	interrupt-parent = <&socgpio>;
+	interrupts = <0x17 0x8>;
+	interrupt-names = "mcp23017@21 irq";
+	interrupt-controller;
+	#interrupt-cells = <0x2>;
+	microchip,irq-mirror;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2cgpio0irq &gpio21pullups>;
+
+	gpio21pullups: pinmux {
+		pins =	"gpio0", "gpio1", "gpio2", "gpio3",
+			"gpio4", "gpio5", "gpio6", "gpio7",
+			"gpio8", "gpio9", "gpio10", "gpio11",
+			"gpio12", "gpio13", "gpio14", "gpio15";
+		bias-pull-up;
+	};
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
index 5b12c57e7f02..5c25fcb29fb5 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
@@ -15,6 +15,7 @@ PMIC's from Qualcomm.
 		    "qcom,pm8921-gpio"
 		    "qcom,pm8941-gpio"
 		    "qcom,pm8994-gpio"
+		    "qcom,pmi8994-gpio"
 		    "qcom,pma8084-gpio"
 		    "qcom,pmi8994-gpio"
 
@@ -85,6 +86,7 @@ to specify in a pin configuration subnode:
 		    gpio1-gpio44 for pm8921
 		    gpio1-gpio36 for pm8941
 		    gpio1-gpio22 for pm8994
+		    gpio1-gpio10 for pmi8994
 		    gpio1-gpio22 for pma8084
 		    gpio1-gpio10 for pmi8994
 
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt
index 43e21474528a..fd3696eb36bf 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt
@@ -12,8 +12,10 @@ Pin controller node
 -------------------
 
 Required properties:
-  - compatible
-    this shall be "renesas,r7s72100-ports".
+  - compatible: should be:
+    - "renesas,r7s72100-ports": for RZ/A1H
+    - "renesas,r7s72101-ports", "renesas,r7s72100-ports": for RZ/A1M
+    - "renesas,r7s72102-ports": for RZ/A1L
 
   - reg
     address base and length of the memory area where the pin controller