Merge tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc into drm-next

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
- DP SDP defines (Ville)
- polish for scdc helpers (Thierry Reding)
- fix lifetimes for connector/plane state across crtc changes (Maarten
  Lankhorst).
- sparse fixes (Ville+Thierry)
- make legacy kms ioctls all interruptible (Maarten)
- push edid override into the edid helpers (out of probe helpers)
  (Jani)
- DP ESI defines for link status (DK)

Driver Changes:
- drm-panel is now in drm-misc!
- minor panel-simple cleanups/refactoring by various folks
- drm_bridge_add cleanup (Inki Dae)
- constify a few i2c_device_id structs (Arvind Yadav)
- More patches from Noralf's fb/gem helper cleanup
- bridge/synopsis: reset fix (Philippe Cornu)
- fix tracepoint include handling in drivers (Thierry)
- rockchip: lvds support (Sandy Huang)
- move sun4i into drm-misc fold (Maxime Ripard)
- sun4i: refactor driver load + support TCON backend/layer muxing
  (Chen-Yu Tsai)
- pl111: support more pl11x variants (Linus Walleij)
- bridge/adv7511: robustify probing/edid handling (Lars-Petersen
  Clausen)

New hw support:
- S6E63J0X03 panel (Hoegeun Kwon)
- OTM8009A panel (Philippe CORNU)
- Seiko 43WVF1G panel (Marco Franchi)
- tve200 driver (Linus Walleij)

Plus assorted of tiny patches all over, including our first outreachy
patches from applicants for the winter round!

* tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc: (101 commits)
  drm: add backwards compatibility support for drm_kms_helper.edid_firmware
  drm: handle override and firmware EDID at drm_do_get_edid() level
  drm/dp: DPCD register defines for link status within ESI field
  drm/rockchip: Replace dev_* with DRM_DEV_*
  drm/tinydrm: Drop driver registered message
  drm/gem-fb-helper: Use debug message on gem lookup failure
  drm/imx: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb()
  drm/bridge: adv7511: Constify HDMI CODEC platform data
  drm/bridge: adv7511: Enable connector polling when no interrupt is specified
  drm/bridge: adv7511: Remove private copy of the EDID
  drm/bridge: adv7511: Properly update EDID when no EDID was found
  drm/crtc: Convert setcrtc ioctl locking to interruptible.
  drm/atomic: Convert pageflip ioctl locking to interruptible.
  drm/legacy: Convert setplane ioctl locking to interruptible.
  drm/legacy: Convert cursor ioctl locking to interruptible.
  drm/atomic: Convert atomic ioctl locking to interruptible.
  drm/atomic: Prepare drm_modeset_lock infrastructure for interruptible waiting, v2.
  drm/tve200: Clean up panel bridging
  drm/doc: Update todo.rst
  drm/dp/mst: Sideband message transaction to power up/down nodes
  ...

4 files changed, 77 insertions, 11 deletions

diff --git a/Documentation/gpu/drm-uapi.rst b/Documentation/gpu/drm-uapi.rst
index 679373b4a03f..a2214cc1f821 100644
--- a/Documentation/gpu/drm-uapi.rst
+++ b/Documentation/gpu/drm-uapi.rst
@@ -168,6 +168,61 @@ IOCTL Support on Device Nodes
 .. kernel-doc:: drivers/gpu/drm/drm_ioctl.c
    :doc: driver specific ioctls
 
+Recommended IOCTL Return Values
+-------------------------------
+
+In theory a driver's IOCTL callback is only allowed to return very few error
+codes. In practice it's good to abuse a few more. This section documents common
+practice within the DRM subsystem:
+
+ENOENT:
+        Strictly this should only be used when a file doesn't exist e.g. when
+        calling the open() syscall. We reuse that to signal any kind of object
+        lookup failure, e.g. for unknown GEM buffer object handles, unknown KMS
+        object handles and similar cases.
+
+ENOSPC:
+        Some drivers use this to differentiate "out of kernel memory" from "out
+        of VRAM". Sometimes also applies to other limited gpu resources used for
+        rendering (e.g. when you have a special limited compression buffer).
+        Sometimes resource allocation/reservation issues in command submission
+        IOCTLs are also signalled through EDEADLK.
+
+        Simply running out of kernel/system memory is signalled through ENOMEM.
+
+EPERM/EACCESS:
+        Returned for an operation that is valid, but needs more privileges.
+        E.g. root-only or much more common, DRM master-only operations return
+        this when when called by unpriviledged clients. There's no clear
+        difference between EACCESS and EPERM.
+
+ENODEV:
+        Feature (like PRIME, modesetting, GEM) is not supported by the driver.
+
+ENXIO:
+        Remote failure, either a hardware transaction (like i2c), but also used
+        when the exporting driver of a shared dma-buf or fence doesn't support a
+        feature needed.
+
+EINTR:
+        DRM drivers assume that userspace restarts all IOCTLs. Any DRM IOCTL can
+        return EINTR and in such a case should be restarted with the IOCTL
+        parameters left unchanged.
+
+EIO:
+        The GPU died and couldn't be resurrected through a reset. Modesetting
+        hardware failures are signalled through the "link status" connector
+        property.
+
+EINVAL:
+        Catch-all for anything that is an invalid argument combination which
+        cannot work.
+
+IOCTL also use other error codes like ETIME, EFAULT, EBUSY, ENOTTY but their
+usage is in line with the common meanings. The above list tries to just document
+DRM specific patterns. Note that ENOTTY has the slightly unintuitive meaning of
+"this IOCTL does not exist", and is used exactly as such in DRM.
+
 .. kernel-doc:: include/drm/drm_ioctl.h
    :internal:
 
diff --git a/Documentation/gpu/index.rst b/Documentation/gpu/index.rst
index 35d673bf9b56..c36586dad29d 100644
--- a/Documentation/gpu/index.rst
+++ b/Documentation/gpu/index.rst
@@ -15,6 +15,7 @@ Linux GPU Driver Developer's Guide
    pl111
    tegra
    tinydrm
+   tve200
    vc4
    vga-switcheroo
    vgaarbiter
diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
index 22af55d06ab8..de9512afd611 100644
--- a/Documentation/gpu/todo.rst
+++ b/Documentation/gpu/todo.rst
@@ -75,17 +75,6 @@ helpers.
 
 Contact: Ville Syrjälä, Daniel Vetter, driver maintainers
 
-Implement deferred fbdev setup in the helper
---------------------------------------------
-
-Many (especially embedded drivers) want to delay fbdev setup until there's a
-real screen plugged in. This is to avoid the dreaded fallback to the low-res
-fbdev default. Many drivers have a hacked-up (and often broken) version of this,
-better to do it once in the shared helpers. Thierry has a patch series, but that
-one needs to be rebased and final polish applied.
-
-Contact: Thierry Reding, Daniel Vetter, driver maintainers
-
 Convert early atomic drivers to async commit helpers
 ----------------------------------------------------
 
@@ -138,6 +127,8 @@ interfaces to fix these issues:
   the acquire context explicitly on stack and then also pass it down into
   drivers explicitly so that the legacy-on-atomic functions can use them.
 
+  Except for some driver code this is done.
+
 * A bunch of the vtable hooks are now in the wrong place: DRM has a split
   between core vfunc tables (named ``drm_foo_funcs``), which are used to
   implement the userspace ABI. And then there's the optional hooks for the
@@ -151,6 +142,8 @@ interfaces to fix these issues:
   connector at runtime. That's almost all of them, and would allow us to get
   rid of a lot of ``best_encoder`` boilerplate in drivers.
 
+  This was almost done, but new drivers added a few more cases again.
+
 Contact: Daniel Vetter
 
 Get rid of dev->struct_mutex from GEM drivers
@@ -177,6 +170,17 @@ following drivers still use ``struct_mutex``: ``msm``, ``omapdrm`` and
 
 Contact: Daniel Vetter, respective driver maintainers
 
+Convert instances of dev_info/dev_err/dev_warn to their DRM_DEV_* equivalent
+----------------------------------------------------------------------------
+
+For drivers which could have multiple instances, it is necessary to
+differentiate between which is which in the logs. Since DRM_INFO/WARN/ERROR
+don't do this, drivers used dev_info/warn/err to make this differentiation. We
+now have DRM_DEV_* variants of the drm print macros, so we can start to convert
+those drivers back to using drm-formwatted specific log messages.
+
+Contact: Sean Paul, Maintainer of the driver you plan to convert
+
 Core refactorings
 =================
 
diff --git a/Documentation/gpu/tve200.rst b/Documentation/gpu/tve200.rst
new file mode 100644
index 000000000000..69b17b324e12
--- /dev/null
+++ b/Documentation/gpu/tve200.rst
@@ -0,0 +1,6 @@
+==================================
+ drm/tve200 Faraday TV Encoder 200
+==================================
+
+.. kernel-doc:: drivers/gpu/drm/tve200/tve200_drv.c
+   :doc: Faraday TV Encoder 200