summaryrefslogtreecommitdiff
path: root/Documentation/networking
diff options
context:
space:
mode:
authorPaul Gortmaker <paul.gortmaker@windriver.com>2013-01-20 17:14:45 -0500
committerPaul Gortmaker <paul.gortmaker@windriver.com>2013-01-22 10:39:55 -0500
commit0ffd89e48fc10f9665b07615cde40b1775b24570 (patch)
tree1732ddb968af3f0854d313bfa0c4b75895d2c803 /Documentation/networking
parent1f1c7a5c1dca01dd8f3f740420f92c7d1d2ae080 (diff)
drivers/net: delete Digital EtherWorks-3 support.
This is another one that makes sense to target for obsolescence, since it (a)appeared pre-1995, and (b)was rather rare, and (c)did not really have any statistically significant active linux user base. Removing this ISA 10Mbit driver support is unlikely to be even noticed by the user base of 3.9+ linux kernels, especially when the documentation clearly indicates the vintage with this text: "...designed to work with all kernels > 1.1.33" Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Diffstat (limited to 'Documentation/networking')
-rw-r--r--Documentation/networking/00-INDEX2
-rw-r--r--Documentation/networking/ewrk3.txt46
2 files changed, 0 insertions, 48 deletions
diff --git a/Documentation/networking/00-INDEX b/Documentation/networking/00-INDEX
index 6ec1d6f368af..258d9b92c36f 100644
--- a/Documentation/networking/00-INDEX
+++ b/Documentation/networking/00-INDEX
@@ -70,8 +70,6 @@ e1000e.txt
- README for the Intel Gigabit Ethernet Driver (e1000e).
eql.txt
- serial IP load balancing
-ewrk3.txt
- - the Digital EtherWORKS 3 DE203/4/5 Ethernet driver
fib_trie.txt
- Level Compressed Trie (LC-trie) notes: a structure for routing.
filter.txt
diff --git a/Documentation/networking/ewrk3.txt b/Documentation/networking/ewrk3.txt
deleted file mode 100644
index 90e9e5f16e6b..000000000000
--- a/Documentation/networking/ewrk3.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-The EtherWORKS 3 driver in this distribution is designed to work with all
-kernels > 1.1.33 (approx) and includes tools in the 'ewrk3tools'
-subdirectory to allow set up of the card, similar to the MSDOS
-'NICSETUP.EXE' tools provided on the DOS drivers disk (type 'make' in that
-subdirectory to make the tools).
-
-The supported cards are DE203, DE204 and DE205. All other cards are NOT
-supported - refer to 'depca.c' for running the LANCE based network cards and
-'de4x5.c' for the DIGITAL Semiconductor PCI chip based adapters from
-Digital.
-
-The ability to load this driver as a loadable module has been included and
-used extensively during the driver development (to save those long reboot
-sequences). To utilise this ability, you have to do 8 things:
-
- 0) have a copy of the loadable modules code installed on your system.
- 1) copy ewrk3.c from the /linux/drivers/net directory to your favourite
- temporary directory.
- 2) edit the source code near line 1898 to reflect the I/O address and
- IRQ you're using.
- 3) compile ewrk3.c, but include -DMODULE in the command line to ensure
- that the correct bits are compiled (see end of source code).
- 4) if you are wanting to add a new card, goto 5. Otherwise, recompile a
- kernel with the ewrk3 configuration turned off and reboot.
- 5) insmod ewrk3.o
- [Alan Cox: Changed this so you can insmod ewrk3.o irq=x io=y]
- [Adam Kropelin: Multiple cards now supported by irq=x1,x2 io=y1,y2]
- 6) run the net startup bits for your new eth?? interface manually
- (usually /etc/rc.inet[12] at boot time).
- 7) enjoy!
-
- Note that autoprobing is not allowed in loadable modules - the system is
- already up and running and you're messing with interrupts.
-
- To unload a module, turn off the associated interface
- 'ifconfig eth?? down' then 'rmmod ewrk3'.
-
-The performance we've achieved so far has been measured through the 'ttcp'
-tool at 975kB/s. This measures the total TCP stack performance which
-includes the card, so don't expect to get much nearer the 1.25MB/s
-theoretical Ethernet rate.
-
-
-Enjoy!
-
-Dave