summaryrefslogtreecommitdiff
path: root/Documentation/s390
diff options
context:
space:
mode:
authorHeiko Carstens <heiko.carstens@de.ibm.com>2019-07-25 09:23:39 +0200
committerVasily Gorbik <gor@linux.ibm.com>2019-08-21 12:41:43 +0200
commitf62f7dcbf023160ca47eb4bc7228ece8207f8a8e (patch)
tree2d661e3a7fc877bedcd4d17588721fbf79e30f26 /Documentation/s390
parent8c72e0c85212df4e7c77fca55556e423fe17e801 (diff)
Documentation/s390: remove outdated debugging390 documentation
This file would need a lot of work to make sense again. Thomas Huth started working on that four years ago, but that wasn't finished. Therefore remove this. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Diffstat (limited to 'Documentation/s390')
-rw-r--r--Documentation/s390/debugging390.rst2613
-rw-r--r--Documentation/s390/index.rst1
2 files changed, 0 insertions, 2614 deletions
diff --git a/Documentation/s390/debugging390.rst b/Documentation/s390/debugging390.rst
deleted file mode 100644
index 73ad0b06c666..000000000000
--- a/Documentation/s390/debugging390.rst
+++ /dev/null
@@ -1,2613 +0,0 @@
-=============================================
-Debugging on Linux for s/390 & z/Architecture
-=============================================
-
-Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
-
-Copyright (C) 2000-2001 IBM Deutschland Entwicklung GmbH, IBM Corporation
-
-.. Best viewed with fixed width fonts
-
-Overview of Document:
-=====================
-This document is intended to give a good overview of how to debug Linux for
-s/390 and z/Architecture. It is not intended as a complete reference and not a
-tutorial on the fundamentals of C & assembly. It doesn't go into
-390 IO in any detail. It is intended to complement the documents in the
-reference section below & any other worthwhile references you get.
-
-It is intended like the Enterprise Systems Architecture/390 Reference Summary
-to be printed out & used as a quick cheat sheet self help style reference when
-problems occur.
-
-.. Contents
- ========
- Register Set
- Address Spaces on Intel Linux
- Address Spaces on Linux for s/390 & z/Architecture
- The Linux for s/390 & z/Architecture Kernel Task Structure
- Register Usage & Stackframes on Linux for s/390 & z/Architecture
- A sample program with comments
- Compiling programs for debugging on Linux for s/390 & z/Architecture
- Debugging under VM
- s/390 & z/Architecture IO Overview
- Debugging IO on s/390 & z/Architecture under VM
- GDB on s/390 & z/Architecture
- Stack chaining in gdb by hand
- Examining core dumps
- ldd
- Debugging modules
- The proc file system
- SysRq
- References
- Special Thanks
-
-Register Set
-============
-The current architectures have the following registers.
-
-16 General propose registers, 32 bit on s/390 and 64 bit on z/Architecture,
-r0-r15 (or gpr0-gpr15), used for arithmetic and addressing.
-
-16 Control registers, 32 bit on s/390 and 64 bit on z/Architecture, cr0-cr15,
-kernel usage only, used for memory management, interrupt control, debugging
-control etc.
-
-16 Access registers (ar0-ar15), 32 bit on both s/390 and z/Architecture,
-normally not used by normal programs but potentially could be used as
-temporary storage. These registers have a 1:1 association with general
-purpose registers and are designed to be used in the so-called access
-register mode to select different address spaces.
-Access register 0 (and access register 1 on z/Architecture, which needs a
-64 bit pointer) is currently used by the pthread library as a pointer to
-the current running threads private area.
-
-16 64-bit floating point registers (fp0-fp15 ) IEEE & HFP floating
-point format compliant on G5 upwards & a Floating point control reg (FPC)
-
-4 64-bit registers (fp0,fp2,fp4 & fp6) HFP only on older machines.
-
-Note:
- Linux (currently) always uses IEEE & emulates G5 IEEE format on older
- machines, ( provided the kernel is configured for this ).
-
-
-The PSW is the most important register on the machine it
-is 64 bit on s/390 & 128 bit on z/Architecture & serves the roles of
-a program counter (pc), condition code register,memory space designator.
-In IBM standard notation I am counting bit 0 as the MSB.
-It has several advantages over a normal program counter
-in that you can change address translation & program counter
-in a single instruction. To change address translation,
-e.g. switching address translation off requires that you
-have a logical=physical mapping for the address you are
-currently running at.
-
-+-------------------------+-------------------------------------------------+
-| Bit | |
-+--------+----------------+ Value |
-| s/390 | z/Architecture | |
-+========+================+=================================================+
-| 0 | 0 | Reserved (must be 0) otherwise specification |
-| | | exception occurs. |
-+--------+----------------+-------------------------------------------------+
-| 1 | 1 | Program Event Recording 1 PER enabled, |
-| | | PER is used to facilitate debugging e.g. |
-| | | single stepping. |
-+--------+----------------+-------------------------------------------------+
-| 2-4 | 2-4 | Reserved (must be 0). |
-+--------+----------------+-------------------------------------------------+
-| 5 | 5 | Dynamic address translation 1=DAT on. |
-+--------+----------------+-------------------------------------------------+
-| 6 | 6 | Input/Output interrupt Mask |
-+--------+----------------+-------------------------------------------------+
-| 7 | 7 | External interrupt Mask used primarily for |
-| | | interprocessor signalling and clock interrupts. |
-+--------+----------------+-------------------------------------------------+
-| 8-11 | 8-11 | PSW Key used for complex memory protection |
-| | | mechanism (not used under linux) |
-+--------+----------------+-------------------------------------------------+
-| 12 | 12 | 1 on s/390 0 on z/Architecture |
-+--------+----------------+-------------------------------------------------+
-| 13 | 13 | Machine Check Mask 1=enable machine check |
-| | | interrupts |
-+--------+----------------+-------------------------------------------------+
-| 14 | 14 | Wait State. Set this to 1 to stop the processor |
-| | | except for interrupts and give time to other |
-| | | LPARS. Used in CPU idle in the kernel to |
-| | | increase overall usage of processor resources. |
-+--------+----------------+-------------------------------------------------+
-| 15 | 15 | Problem state (if set to 1 certain instructions |
-| | | are disabled). All linux user programs run with |
-| | | this bit 1 (useful info for debugging under VM).|
-+--------+----------------+-------------------------------------------------+
-| 16-17 | 16-17 | Address Space Control |
-| | | |
-| | | 00 Primary Space Mode: |
-| | | |
-| | | The register CR1 contains the primary |
-| | | address-space control element (PASCE), which |
-| | | points to the primary space region/segment |
-| | | table origin. |
-| | | |
-| | | 01 Access register mode |
-| | | |
-| | | 10 Secondary Space Mode: |
-| | | |
-| | | The register CR7 contains the secondary |
-| | | address-space control element (SASCE), which |
-| | | points to the secondary space region or |
-| | | segment table origin. |
-| | | |
-| | | 11 Home Space Mode: |
-| | | |
-| | | The register CR13 contains the home space |
-| | | address-space control element (HASCE), which |
-| | | points to the home space region/segment |
-| | | table origin. |
-| | | |
-| | | See "Address Spaces on Linux for s/390 & |
-| | | z/Architecture" below for more information |
-| | | about address space usage in Linux. |
-+--------+----------------+-------------------------------------------------+
-| 18-19 | 18-19 | Condition codes (CC) |
-+--------+----------------+-------------------------------------------------+
-| 20 | 20 | Fixed point overflow mask if 1=FPU exceptions |
-| | | for this event occur (normally 0) |
-+--------+----------------+-------------------------------------------------+
-| 21 | 21 | Decimal overflow mask if 1=FPU exceptions for |
-| | | this event occur (normally 0) |
-+--------+----------------+-------------------------------------------------+
-| 22 | 22 | Exponent underflow mask if 1=FPU exceptions |
-| | | for this event occur (normally 0) |
-+--------+----------------+-------------------------------------------------+
-| 23 | 23 | Significance Mask if 1=FPU exceptions for this |
-| | | event occur (normally 0) |
-+--------+----------------+-------------------------------------------------+
-| 24-31 | 24-30 | Reserved Must be 0. |
-| +----------------+-------------------------------------------------+
-| | 31 | Extended Addressing Mode |
-| +----------------+-------------------------------------------------+
-| | 32 | Basic Addressing Mode |
-| | | |
-| | | Used to set addressing mode:: |
-| | | |
-| | | +---------+----------+----------+ |
-| | | | PSW 31 | PSW 32 | | |
-| | | +---------+----------+----------+ |
-| | | | 0 | 0 | 24 bit | |
-| | | +---------+----------+----------+ |
-| | | | 0 | 1 | 31 bit | |
-| | | +---------+----------+----------+ |
-| | | | 1 | 1 | 64 bit | |
-| | | +---------+----------+----------+ |
-+--------+----------------+-------------------------------------------------+
-| 32 | | 1=31 bit addressing mode 0=24 bit addressing |
-| | | mode (for backward compatibility), linux |
-| | | always runs with this bit set to 1 |
-+--------+----------------+-------------------------------------------------+
-| 33-64 | | Instruction address. |
-| +----------------+-------------------------------------------------+
-| | 33-63 | Reserved must be 0 |
-| +----------------+-------------------------------------------------+
-| | 64-127 | Address |
-| | | |
-| | | - In 24 bits mode bits 64-103=0 bits 104-127 |
-| | | Address |
-| | | - In 31 bits mode bits 64-96=0 bits 97-127 |
-| | | Address |
-| | | |
-| | | Note: |
-| | | unlike 31 bit mode on s/390 bit 96 must be |
-| | | zero when loading the address with LPSWE |
-| | | otherwise a specification exception occurs, |
-| | | LPSW is fully backward compatible. |
-+--------+----------------+-------------------------------------------------+
-
-Prefix Page(s)
---------------
-This per cpu memory area is too intimately tied to the processor not to mention.
-It exists between the real addresses 0-4096 on s/390 and between 0-8192 on
-z/Architecture and is exchanged with one page on s/390 or two pages on
-z/Architecture in absolute storage by the set prefix instruction during Linux
-startup.
-
-This page is mapped to a different prefix for each processor in an SMP
-configuration (assuming the OS designer is sane of course).
-
-Bytes 0-512 (200 hex) on s/390 and 0-512, 4096-4544, 4604-5119 currently on
-z/Architecture are used by the processor itself for holding such information
-as exception indications and entry points for exceptions.
-
-Bytes after 0xc00 hex are used by linux for per processor globals on s/390 and
-z/Architecture (there is a gap on z/Architecture currently between 0xc00 and
-0x1000, too, which is used by Linux).
-
-The closest thing to this on traditional architectures is the interrupt
-vector table. This is a good thing & does simplify some of the kernel coding
-however it means that we now cannot catch stray NULL pointers in the
-kernel without hard coded checks.
-
-
-
-Address Spaces on Intel Linux
-=============================
-
-The traditional Intel Linux is approximately mapped as follows forgive
-the ascii art::
-
- 0xFFFFFFFF 4GB Himem *****************
- * *
- * Kernel Space *
- * *
- ***************** ****************
- User Space Himem * User Stack * * *
- (typically 0xC0000000 3GB ) ***************** * *
- * Shared Libs * * Next Process *
- ***************** * to *
- * * <== * Run * <==
- * User Program * * *
- * Data BSS * * *
- * Text * * *
- * Sections * * *
- 0x00000000 ***************** ****************
-
-Now it is easy to see that on Intel it is quite easy to recognise a kernel
-address as being one greater than user space himem (in this case 0xC0000000),
-and addresses of less than this are the ones in the current running program on
-this processor (if an smp box).
-
-If using the virtual machine ( VM ) as a debugger it is quite difficult to
-know which user process is running as the address space you are looking at
-could be from any process in the run queue.
-
-The limitation of Intels addressing technique is that the linux
-kernel uses a very simple real address to virtual addressing technique
-of Real Address=Virtual Address-User Space Himem.
-This means that on Intel the kernel linux can typically only address
-Himem=0xFFFFFFFF-0xC0000000=1GB & this is all the RAM these machines
-can typically use.
-
-They can lower User Himem to 2GB or lower & thus be
-able to use 2GB of RAM however this shrinks the maximum size
-of User Space from 3GB to 2GB they have a no win limit of 4GB unless
-they go to 64 Bit.
-
-
-On 390 our limitations & strengths make us slightly different.
-For backward compatibility we are only allowed use 31 bits (2GB)
-of our 32 bit addresses, however, we use entirely separate address
-spaces for the user & kernel.
-
-This means we can support 2GB of non Extended RAM on s/390, & more
-with the Extended memory management swap device &
-currently 4TB of physical memory currently on z/Architecture.
-
-
-Address Spaces on Linux for s/390 & z/Architecture
-==================================================
-
-Our addressing scheme is basically as follows::
-
- Primary Space Home Space
- Himem 0x7fffffff 2GB on s/390 ***************** ****************
- currently 0x3ffffffffff (2^42)-1 * User Stack * * *
- on z/Architecture. ***************** * *
- * Shared Libs * * *
- ***************** * *
- * * * Kernel *
- * User Program * * *
- * Data BSS * * *
- * Text * * *
- * Sections * * *
- 0x00000000 ***************** ****************
-
-This also means that we need to look at the PSW problem state bit and the
-addressing mode to decide whether we are looking at user or kernel space.
-
-User space runs in primary address mode (or access register mode within
-the vdso code).
-
-The kernel usually also runs in home space mode, however when accessing
-user space the kernel switches to primary or secondary address mode if
-the mvcos instruction is not available or if a compare-and-swap (futex)
-instruction on a user space address is performed.
-
-When also looking at the ASCE control registers, this means:
-
-User space:
-
-- runs in primary or access register mode
-- cr1 contains the user asce
-- cr7 contains the user asce
-- cr13 contains the kernel asce
-
-Kernel space:
-
-- runs in home space mode
-- cr1 contains the user or kernel asce
-
- - the kernel asce is loaded when a uaccess requires primary or
- secondary address mode
-
-- cr7 contains the user or kernel asce, (changed with set_fs())
-- cr13 contains the kernel asce
-
-In case of uaccess the kernel changes to:
-
-- primary space mode in case of a uaccess (copy_to_user) and uses
- e.g. the mvcp instruction to access user space. However the kernel
- will stay in home space mode if the mvcos instruction is available
-- secondary space mode in case of futex atomic operations, so that the
- instructions come from primary address space and data from secondary
- space
-
-In case of KVM, the kernel runs in home space mode, but cr1 gets switched
-to contain the gmap asce before the SIE instruction gets executed. When
-the SIE instruction is finished, cr1 will be switched back to contain the
-user asce.
-
-
-Virtual Addresses on s/390 & z/Architecture
-===========================================
-
-A virtual address on s/390 is made up of 3 parts
-The SX (segment index, roughly corresponding to the PGD & PMD in Linux
-terminology) being bits 1-11.
-
-The PX (page index, corresponding to the page table entry (pte) in Linux
-terminology) being bits 12-19.
-
-The remaining bits BX (the byte index are the offset in the page )
-i.e. bits 20 to 31.
-
-On z/Architecture in linux we currently make up an address from 4 parts.
-
-- The region index bits (RX) 0-32 we currently use bits 22-32
-- The segment index (SX) being bits 33-43
-- The page index (PX) being bits 44-51
-- The byte index (BX) being bits 52-63
-
-Notes:
- 1) s/390 has no PMD so the PMD is really the PGD also.
- A lot of this stuff is defined in pgtable.h.
-
- 2) Also seeing as s/390's page indexes are only 1k in size
- (bits 12-19 x 4 bytes per pte ) we use 1 ( page 4k )
- to make the best use of memory by updating 4 segment indices
- entries each time we mess with a PMD & use offsets
- 0,1024,2048 & 3072 in this page as for our segment indexes.
- On z/Architecture our page indexes are now 2k in size
- ( bits 12-19 x 8 bytes per pte ) we do a similar trick
- but only mess with 2 segment indices each time we mess with
- a PMD.
-
- 3) As z/Architecture supports up to a massive 5-level page table lookup we
- can only use 3 currently on Linux ( as this is all the generic kernel
- currently supports ) however this may change in future
- this allows us to access ( according to my sums )
- 4TB of virtual storage per process i.e.
- 4096*512(PTES)*1024(PMDS)*2048(PGD) = 4398046511104 bytes,
- enough for another 2 or 3 of years I think :-).
- to do this we use a region-third-table designation type in
- our address space control registers.
-
-
-The Linux for s/390 & z/Architecture Kernel Task Structure
-==========================================================
-Each process/thread under Linux for S390 has its own kernel task_struct
-defined in linux/include/linux/sched.h
-The S390 on initialisation & resuming of a process on a cpu sets
-the __LC_KERNEL_STACK variable in the spare prefix area for this cpu
-(which we use for per-processor globals).
-
-The kernel stack pointer is intimately tied with the task structure for
-each processor as follows::
-
- s/390
- ************************
- * 1 page kernel stack *
- * ( 4K ) *
- ************************
- * 1 page task_struct *
- * ( 4K ) *
- 8K aligned ************************
-
- z/Architecture
- ************************
- * 2 page kernel stack *
- * ( 8K ) *
- ************************
- * 2 page task_struct *
- * ( 8K ) *
- 16K aligned ************************
-
-What this means is that we don't need to dedicate any register or global
-variable to point to the current running process & can retrieve it with the
-following very simple construct for s/390 & one very similar for
-z/Architecture::
-
- static inline struct task_struct * get_current(void)
- {
- struct task_struct *current;
- __asm__("lhi %0,-8192\n\t"
- "nr %0,15"
- : "=r" (current) );
- return current;
- }
-
-i.e. just anding the current kernel stack pointer with the mask -8192.
-Thankfully because Linux doesn't have support for nested IO interrupts
-& our devices have large buffers can survive interrupts being shut for
-short amounts of time we don't need a separate stack for interrupts.
-
-
-
-
-Register Usage & Stackframes on Linux for s/390 & z/Architecture
-=================================================================
-Overview:
----------
-This is the code that gcc produces at the top & the bottom of
-each function. It usually is fairly consistent & similar from
-function to function & if you know its layout you can probably
-make some headway in finding the ultimate cause of a problem
-after a crash without a source level debugger.
-
-Note: To follow stackframes requires a knowledge of C or Pascal &
-limited knowledge of one assembly language.
-
-It should be noted that there are some differences between the
-s/390 and z/Architecture stack layouts as the z/Architecture stack layout
-didn't have to maintain compatibility with older linkage formats.
-
-Glossary:
----------
-alloca:
- This is a built in compiler function for runtime allocation
- of extra space on the callers stack which is obviously freed
- up on function exit ( e.g. the caller may choose to allocate nothing
- of a buffer of 4k if required for temporary purposes ), it generates
- very efficient code ( a few cycles ) when compared to alternatives
- like malloc.
-
-automatics:
- These are local variables on the stack, i.e they aren't in registers &
- they aren't static.
-
-back-chain:
- This is a pointer to the stack pointer before entering a
- framed functions ( see frameless function ) prologue got by
- dereferencing the address of the current stack pointer,
- i.e. got by accessing the 32 bit value at the stack pointers
- current location.
-
-base-pointer:
- This is a pointer to the back of the literal pool which
- is an area just behind each procedure used to store constants
- in each function.
-
-call-clobbered:
- The caller probably needs to save these registers if there
- is something of value in them, on the stack or elsewhere before making a
- call to another procedure so that it can restore it later.
-
-epilogue:
- The code generated by the compiler to return to the caller.
-
-frameless-function:
- A frameless function in Linux for s390 & z/Architecture is one which doesn't
- need more than the register save area (96 bytes on s/390, 160 on z/Architecture)
- given to it by the caller.
-
- A frameless function never:
-
- 1) Sets up a back chain.
- 2) Calls alloca.
- 3) Calls other normal functions
- 4) Has automatics.
-
-GOT-pointer:
- This is a pointer to the global-offset-table in ELF
- ( Executable Linkable Format, Linux'es most common executable format ),
- all globals & shared library objects are found using this pointer.
-
-lazy-binding
- ELF shared libraries are typically only loaded when routines in the shared
- library are actually first called at runtime. This is lazy binding.
-
-procedure-linkage-table
- This is a table found from the GOT which contains pointers to routines
- in other shared libraries which can't be called to by easier means.
-
-prologue:
- The code generated by the compiler to set up the stack frame.
-
-outgoing-args:
- This is extra area allocated on the stack of the calling function if the
- parameters for the callee's cannot all be put in registers, the same
- area can be reused by each function the caller calls.
-
-routine-descriptor:
- A COFF executable format based concept of a procedure reference
- actually being 8 bytes or more as opposed to a simple pointer to the routine.
- This is typically defined as follows:
-
- - Routine Descriptor offset 0=Pointer to Function
- - Routine Descriptor offset 4=Pointer to Table of Contents
-
- The table of contents/TOC is roughly equivalent to a GOT pointer.
- & it means that shared libraries etc. can be shared between several
- environments each with their own TOC.
-
-static-chain:
- This is used in nested functions a concept adopted from pascal
- by gcc not used in ansi C or C++ ( although quite useful ), basically it
- is a pointer used to reference local variables of enclosing functions.
- You might come across this stuff once or twice in your lifetime.
-
- e.g.
-
- The function below should return 11 though gcc may get upset & toss warnings
- about unused variables::
-
- int FunctionA(int a)
- {
- int b;
- FunctionC(int c)
- {
- b=c+1;
- }
- FunctionC(10);
- return(b);
- }
-
-
-s/390 & z/Architecture Register usage
-=====================================
-
-======== ========================================== ===============
-r0 used by syscalls/assembly call-clobbered
-r1 used by syscalls/assembly call-clobbered
-r2 argument 0 / return value 0 call-clobbered
-r3 argument 1 / return value 1 (if long long) call-clobbered
-r4 argument 2 call-clobbered
-r5 argument 3 call-clobbered
-r6 argument 4 saved
-r7 pointer-to arguments 5 to ... saved
-r8 this & that saved
-r9 this & that saved
-r10 static-chain ( if nested function ) saved
-r11 frame-pointer ( if function used alloca ) saved
-r12 got-pointer saved
-r13 base-pointer saved
-r14 return-address saved
-r15 stack-pointer saved
-
-f0 argument 0 / return value ( float/double ) call-clobbered
-f2 argument 1 call-clobbered
-f4 z/Architecture argument 2 saved
-f6 z/Architecture argument 3 saved
-======== ========================================== ===============
-
-The remaining floating points
-f1,f3,f5 f7-f15 are call-clobbered.
-
-Notes:
-------
-1) The only requirement is that registers which are used
- by the callee are saved, e.g. the compiler is perfectly
- capable of using r11 for purposes other than a frame a
- frame pointer if a frame pointer is not needed.
-2) In functions with variable arguments e.g. printf the calling procedure
- is identical to one without variable arguments & the same number of
- parameters. However, the prologue of this function is somewhat more
- hairy owing to it having to move these parameters to the stack to
- get va_start, va_arg & va_end to work.
-3) Access registers are currently unused by gcc but are used in
- the kernel. Possibilities exist to use them at the moment for
- temporary storage but it isn't recommended.
-4) Only 4 of the floating point registers are used for
- parameter passing as older machines such as G3 only have only 4
- & it keeps the stack frame compatible with other compilers.
- However with IEEE floating point emulation under linux on the
- older machines you are free to use the other 12.
-5) A long long or double parameter cannot be have the
- first 4 bytes in a register & the second four bytes in the
- outgoing args area. It must be purely in the outgoing args
- area if crossing this boundary.
-6) Floating point parameters are mixed with outgoing args
- on the outgoing args area in the order the are passed in as parameters.
-7) Floating point arguments 2 & 3 are saved in the outgoing args area for
- z/Architecture
-
-
-Stack Frame Layout
-------------------
-
-========= ============== ======================================================
-s/390 z/Architecture
-========= ============== ======================================================
-0 0 back chain ( a 0 here signifies end of back chain )
-4 8 eos ( end of stack, not used on Linux for S390 used
- in other linkage formats )
-8 16 glue used in other s/390 linkage formats for saved
- routine descriptors etc.
-12 24 glue used in other s/390 linkage formats for saved
- routine descriptors etc.
-16 32 scratch area
-20 40 scratch area
-24 48 saved r6 of caller function
-28 56 saved r7 of caller function
-32 64 saved r8 of caller function
-36 72 saved r9 of caller function
-40 80 saved r10 of caller function
-44 88 saved r11 of caller function
-48 96 saved r12 of caller function
-52 104 saved r13 of caller function
-56 112 saved r14 of caller function
-60 120 saved r15 of caller function
-64 128 saved f4 of caller function
-72 132 saved f6 of caller function
-80 undefined
-96 160 outgoing args passed from caller to callee
-96+x 160+x possible stack alignment ( 8 bytes desirable )
-96+x+y 160+x+y alloca space of caller ( if used )
-96+x+y+z 160+x+y+z automatics of caller ( if used )
-0 back-chain
-========= ============== ======================================================
-
-A sample program with comments.
-===============================
-
-Comments on the function test
------------------------------
-1) It didn't need to set up a pointer to the constant pool gpr13 as it is not
- used ( :-( ).
-2) This is a frameless function & no stack is bought.
-3) The compiler was clever enough to recognise that it could return the
- value in r2 as well as use it for the passed in parameter ( :-) ).
-4) The basr ( branch relative & save ) trick works as follows the instruction
- has a special case with r0,r0 with some instruction operands is understood as
- the literal value 0, some risc architectures also do this ). So now
- we are branching to the next address & the address new program counter is
- in r13,so now we subtract the size of the function prologue we have executed
- the size of the literal pool to get to the top of the literal pool::
-
-
- 0040037c int test(int b)
- { # Function prologue below
- 40037c: 90 de f0 34 stm %r13,%r14,52(%r15) # Save registers r13 & r14
- 400380: 0d d0 basr %r13,%r0 # Set up pointer to constant pool using
- 400382: a7 da ff fa ahi %r13,-6 # basr trick
- return(5+b);
- # Huge main program
- 400386: a7 2a 00 05 ahi %r2,5 # add 5 to r2
-
- # Function epilogue below
- 40038a: 98 de f0 34 lm %r13,%r14,52(%r15) # restore registers r13 & 14
- 40038e: 07 fe br %r14 # return
- }
-
-Comments on the function main
------------------------------
-1) The compiler did this function optimally ( 8-) )::
-
- Literal pool for main.
- 400390: ff ff ff ec .long 0xffffffec
- main(int argc,char *argv[])
- { # Function prologue below
- 400394: 90 bf f0 2c stm %r11,%r15,44(%r15) # Save necessary registers
- 400398: 18 0f lr %r0,%r15 # copy stack pointer to r0
- 40039a: a7 fa ff a0 ahi %r15,-96 # Make area for callee saving
- 40039e: 0d d0 basr %r13,%r0 # Set up r13 to point to
- 4003a0: a7 da ff f0 ahi %r13,-16 # literal pool
- 4003a4: 50 00 f0 00 st %r0,0(%r15) # Save backchain
-
- return(test(5)); # Main Program Below
- 4003a8: 58 e0 d0 00 l %r14,0(%r13) # load relative address of test from
- # literal pool
- 4003ac: a7 28 00 05 lhi %r2,5 # Set first parameter to 5
- 4003b0: 4d ee d0 00 bas %r14,0(%r14,%r13) # jump to test setting r14 as return
- # address using branch & save instruction.
-
- # Function Epilogue below
- 4003b4: 98 bf f0 8c lm %r11,%r15,140(%r15)# Restore necessary registers.
- 4003b8: 07 fe br %r14 # return to do program exit
- }
-
-
-Compiler updates
-----------------
-
-::
-
- main(int argc,char *argv[])
- {
- 4004fc: 90 7f f0 1c stm %r7,%r15,28(%r15)
- 400500: a7 d5 00 04 bras %r13,400508 <main+0xc>
- 400504: 00 40 04 f4 .long 0x004004f4
- # compiler now puts constant pool in code to so it saves an instruction
- 400508: 18 0f lr %r0,%r15
- 40050a: a7 fa ff a0 ahi %r15,-96
- 40050e: 50 00 f0 00 st %r0,0(%r15)
- return(test(5));
- 400512: 58 10 d0 00 l %r1,0(%r13)
- 400516: a7 28 00 05 lhi %r2,5
- 40051a: 0d e1 basr %r14,%r1
- # compiler adds 1 extra instruction to epilogue this is done to
- # avoid processor pipeline stalls owing to data dependencies on g5 &
- # above as register 14 in the old code was needed directly after being loaded
- # by the lm %r11,%r15,140(%r15) for the br %14.
- 40051c: 58 40 f0 98 l %r4,152(%r15)
- 400520: 98 7f f0 7c lm %r7,%r15,124(%r15)
- 400524: 07 f4 br %r4
- }
-
-
-Hartmut ( our compiler developer ) also has been threatening to take out the
-stack backchain in optimised code as this also causes pipeline stalls, you
-have been warned.
-
-64 bit z/Architecture code disassembly
---------------------------------------
-
-If you understand the stuff above you'll understand the stuff
-below too so I'll avoid repeating myself & just say that
-some of the instructions have g's on the end of them to indicate
-they are 64 bit & the stack offsets are a bigger,
-the only other difference you'll find between 32 & 64 bit is that
-we now use f4 & f6 for floating point arguments on 64 bit::
-
- 00000000800005b0 <test>:
- int test(int b)
- {
- return(5+b);
- 800005b0: a7 2a 00 05 ahi %r2,5
- 800005b4: b9 14 00 22 lgfr %r2,%r2 # downcast to integer
- 800005b8: 07 fe br %r14
- 800005ba: 07 07 bcr 0,%r7
-
-
- }
-
- 00000000800005bc <main>:
- main(int argc,char *argv[])
- {
- 800005bc: eb bf f0 58 00 24 stmg %r11,%r15,88(%r15)
- 800005c2: b9 04 00 1f lgr %r1,%r15
- 800005c6: a7 fb ff 60 aghi %r15,-160
- 800005ca: e3 10 f0 00 00 24 stg %r1,0(%r15)
- return(test(5));
- 800005d0: a7 29 00 05 lghi %r2,5
- # brasl allows jumps > 64k & is overkill here bras would do fune
- 800005d4: c0 e5 ff ff ff ee brasl %r14,800005b0 <test>
- 800005da: e3 40 f1 10 00 04 lg %r4,272(%r15)
- 800005e0: eb bf f0 f8 00 04 lmg %r11,%r15,248(%r15)
- 800005e6: 07 f4 br %r4
- }
-
-
-
-Compiling programs for debugging on Linux for s/390 & z/Architecture
-====================================================================
--gdwarf-2 now works it should be considered the default debugging
-format for s/390 & z/Architecture as it is more reliable for debugging
-shared libraries, normal -g debugging works much better now
-Thanks to the IBM java compiler developers bug reports.
-
-This is typically done adding/appending the flags -g or -gdwarf-2 to the
-CFLAGS & LDFLAGS variables Makefile of the program concerned.
-
-If using gdb & you would like accurate displays of registers &
-stack traces compile without optimisation i.e make sure
-that there is no -O2 or similar on the CFLAGS line of the Makefile &
-the emitted gcc commands, obviously this will produce worse code
-( not advisable for shipment ) but it is an aid to the debugging process.
-
-This aids debugging because the compiler will copy parameters passed in
-in registers onto the stack so backtracing & looking at passed in
-parameters will work, however some larger programs which use inline functions
-will not compile without optimisation.
-
-Debugging with optimisation has since much improved after fixing
-some bugs, please make sure you are using gdb-5.0 or later developed
-after Nov'2000.
-
-
-
-Debugging under VM
-==================
-
-Notes
------
-Addresses & values in the VM debugger are always hex never decimal
-Address ranges are of the format <HexValue1>-<HexValue2> or
-<HexValue1>.<HexValue2>
-For example, the address range 0x2000 to 0x3000 can be described as 2000-3000
-or 2000.1000
-
-The VM Debugger is case insensitive.
-
-VM's strengths are usually other debuggers weaknesses you can get at any
-resource no matter how sensitive e.g. memory management resources, change
-address translation in the PSW. For kernel hacking you will reap dividends if
-you get good at it.
-
-The VM Debugger displays operators but not operands, and also the debugger
-displays useful information on the same line as the author of the code probably
-felt that it was a good idea not to go over the 80 columns on the screen.
-This isn't as unintuitive as it may seem as the s/390 instructions are easy to
-decode mentally and you can make a good guess at a lot of them as all the
-operands are nibble (half byte aligned).
-So if you have an objdump listing by hand, it is quite easy to follow, and if
-you don't have an objdump listing keep a copy of the s/390 Reference Summary
-or alternatively the s/390 principles of operation next to you.
-e.g. even I can guess that
-0001AFF8' LR 180F CC 0
-is a ( load register ) lr r0,r15
-
-Also it is very easy to tell the length of a 390 instruction from the 2 most
-significant bits in the instruction (not that this info is really useful except
-if you are trying to make sense of a hexdump of code).
-Here is a table
-
-======================= ==================
-Bits Instruction Length
-======================= ==================
-00 2 Bytes
-01 4 Bytes
-10 4 Bytes
-11 6 Bytes
-======================= ==================
-
-The debugger also displays other useful info on the same line such as the
-addresses being operated on destination addresses of branches & condition codes.
-e.g.::
-
- 00019736' AHI A7DAFF0E CC 1
- 000198BA' BRC A7840004 -> 000198C2' CC 0
- 000198CE' STM 900EF068 >> 0FA95E78 CC 2
-
-
-
-Useful VM debugger commands
----------------------------
-
-I suppose I'd better mention this before I start
-to list the current active traces do::
-
- Q TR
-
-there can be a maximum of 255 of these per set
-( more about trace sets later ).
-
-To stop traces issue a::
-
- TR END.
-
-To delete a particular breakpoint issue::
-
- TR DEL <breakpoint number>
-
-The PA1 key drops to CP mode so you can issue debugger commands,
-Doing alt c (on my 3270 console at least ) clears the screen.
-
-hitting b <enter> comes back to the running operating system
-from cp mode ( in our case linux ).
-
-It is typically useful to add shortcuts to your profile.exec file
-if you have one ( this is roughly equivalent to autoexec.bat in DOS ).
-file here are a few from mine::
-
- /* this gives me command history on issuing f12 */
- set pf12 retrieve
- /* this continues */
- set pf8 imm b
- /* goes to trace set a */
- set pf1 imm tr goto a
- /* goes to trace set b */
- set pf2 imm tr goto b
- /* goes to trace set c */
- set pf3 imm tr goto c
-
-
-
-Instruction Tracing
--------------------
-Setting a simple breakpoint::
-
- TR I PSWA <address>
-
-To debug a particular function try::
-
- TR I R <function address range>
- TR I on its own will single step.
- TR I DATA <MNEMONIC> <OPTIONAL RANGE> will trace for particular mnemonics
-
-e.g.::
-
- TR I DATA 4D R 0197BC.4000
-
-will trace for BAS'es ( opcode 4D ) in the range 0197BC.4000
-
-if you were inclined you could add traces for all branch instructions &
-suffix them with the run prefix so you would have a backtrace on screen
-when a program crashes::
-
- TR BR <INTO OR FROM> will trace branches into or out of an address.
-
-e.g.::
-
- TR BR INTO 0
-
-is often quite useful if a program is getting awkward & deciding
-to branch to 0 & crashing as this will stop at the address before in jumps to 0.
-
-::
-
- TR I R <address range> RUN cmd d g
-
-single steps a range of addresses but stays running &
-displays the gprs on each step.
-
-
-
-Displaying & modifying Registers
---------------------------------
-D G
- will display all the gprs
-
-Adding a extra G to all the commands is necessary to access the full 64 bit
-content in VM on z/Architecture. Obviously this isn't required for access
-registers as these are still 32 bit.
-
-e.g.
-
-DGG
- instead of DG
-
-D X
- will display all the control registers
-D AR
- will display all the access registers
-D AR4-7
- will display access registers 4 to 7
-CPU ALL D G
- will display the GRPS of all CPUS in the configuration
-D PSW
- will display the current PSW
-st PSW 2000
- will put the value 2000 into the PSW & cause crash your machine.
-D PREFIX
- displays the prefix offset
-
-
-Displaying Memory
------------------
-To display memory mapped using the current PSW's mapping try::
-
- D <range>
-
-To make VM display a message each time it hits a particular address and
-continue try:
-
-D I<range>
- will disassemble/display a range of instructions.
-
-ST addr 32 bit word
- will store a 32 bit aligned address
-D T<range>
- will display the EBCDIC in an address (if you are that way inclined)
-D R<range>
- will display real addresses ( without DAT ) but with prefixing.
-
-There are other complex options to display if you need to get at say home space
-but are in primary space the easiest thing to do is to temporarily
-modify the PSW to the other addressing mode, display the stuff & then
-restore it.
-
-
-
-Hints
------
-If you want to issue a debugger command without halting your virtual machine
-with the PA1 key try prefixing the command with #CP e.g.::
-
- #cp tr i pswa 2000
-
-also suffixing most debugger commands with RUN will cause them not
-to stop just display the mnemonic at the current instruction on the console.
-
-If you have several breakpoints you want to put into your program &
-you get fed up of cross referencing with System.map
-you can do the following trick for several symbols.
-
-::
-
- grep do_signal System.map
-
-which emits the following among other things::
-
- 0001f4e0 T do_signal
-
-now you can do::
-
- TR I PSWA 0001f4e0 cmd msg * do_signal
-
-This sends a message to your own console each time do_signal is entered.
-( As an aside I wrote a perl script once which automatically generated a REXX
-script with breakpoints on every kernel procedure, this isn't a good idea
-because there are thousands of these routines & VM can only set 255 breakpoints
-at a time so you nearly had to spend as long pruning the file down as you would
-entering the msgs by hand), however, the trick might be useful for a single
-object file. In the 3270 terminal emulator x3270 there is a very useful option
-in the file menu called "Save Screen In File" - this is very good for keeping a
-copy of traces.
-
-From CMS help <command name> will give you online help on a particular command.
-e.g.::
-
- HELP DISPLAY
-
-Also CP has a file called profile.exec which automatically gets called
-on startup of CMS ( like autoexec.bat ), keeping on a DOS analogy session
-CP has a feature similar to doskey, it may be useful for you to
-use profile.exec to define some keystrokes.
-
-SET PF9 IMM B
- This does a single step in VM on pressing F8.
-
-SET PF10 ^
- This sets up the ^ key.
- which can be used for ^c (ctrl-c),^z (ctrl-z) which can't be typed
- directly into some 3270 consoles.
-
-SET PF11 ^-
- This types the starting keystrokes for a sysrq see SysRq below.
-SET PF12 RETRIEVE
- This retrieves command history on pressing F12.
-
-
-Sometimes in VM the display is set up to scroll automatically this
-can be very annoying if there are messages you wish to look at
-to stop this do
-
-TERM MORE 255 255
- This will nearly stop automatic screen updates, however it will
- cause a denial of service if lots of messages go to the 3270 console,
- so it would be foolish to use this as the default on a production machine.
-
-
-Tracing particular processes
-----------------------------
-The kernel's text segment is intentionally at an address in memory that it will
-very seldom collide with text segments of user programs ( thanks Martin ),
-this simplifies debugging the kernel.
-However it is quite common for user processes to have addresses which collide
-this can make debugging a particular process under VM painful under normal
-circumstances as the process may change when doing a::
-
- TR I R <address range>.
-
-Thankfully after reading VM's online help I figured out how to debug
-I particular process.
-
-Your first problem is to find the STD ( segment table designation )
-of the program you wish to debug.
-There are several ways you can do this here are a few
-
-Run::
-
- objdump --syms <program to be debugged> | grep main
-
-To get the address of main in the program. Then::
-
- tr i pswa <address of main>
-
-Start the program, if VM drops to CP on what looks like the entry
-point of the main function this is most likely the process you wish to debug.
-Now do a D X13 or D XG13 on z/Architecture.
-
-On 31 bit the STD is bits 1-19 ( the STO segment table origin )
-& 25-31 ( the STL segment table length ) of CR13.
-
-now type::
-
- TR I R STD <CR13's value> 0.7fffffff
-
-e.g.::
-
- TR I R STD 8F32E1FF 0.7fffffff
-
-Another very useful variation is::
-
- TR STORE INTO STD <CR13's value> <address range>
-
-for finding out when a particular variable changes.
-
-An alternative way of finding the STD of a currently running process
-is to do the following, ( this method is more complex but
-could be quite convenient if you aren't updating the kernel much &
-so your kernel structures will stay constant for a reasonable period of
-time ).
-
-::
-
- grep task /proc/<pid>/status
-
-from this you should see something like::
-
- task: 0f160000 ksp: 0f161de8 pt_regs: 0f161f68
-
-This now gives you a pointer to the task structure.
-
-Now make::
-
- CC:="s390-gcc -g" kernel/sched.s
-
-To get the task_struct stabinfo.
-
-( task_struct is defined in include/linux/sched.h ).
-
-Now we want to look at
-task->active_mm->pgd
-
-on my machine the active_mm in the task structure stab is
-active_mm:(4,12),672,32
-
-its offset is 672/8=84=0x54
-
-the pgd member in the mm_struct stab is
-pgd:(4,6)=*(29,5),96,32
-so its offset is 96/8=12=0xc
-
-so we'll::
-
- hexdump -s 0xf160054 /dev/mem | more
-
-i.e. task_struct+active_mm offset
-to look at the active_mm member::
-
- f160054 0fee cc60 0019 e334 0000 0000 0000 0011
-
-::
-
- hexdump -s 0x0feecc6c /dev/mem | more
-
-i.e. active_mm+pgd offset::
-
- feecc6c 0f2c 0000 0000 0001 0000 0001 0000 0010
-
-we get something like
-now do::
-
- TR I R STD <pgd|0x7f> 0.7fffffff
-
-i.e. the 0x7f is added because the pgd only
-gives the page table origin & we need to set the low bits
-to the maximum possible segment table length.
-
-::
-
- TR I R STD 0f2c007f 0.7fffffff
-
-on z/Architecture you'll probably need to do::
-
- TR I R STD <pgd|0x7> 0.ffffffffffffffff
-
-to set the TableType to 0x1 & the Table length to 3.
-
-
-
-Tracing Program Exceptions
---------------------------
-If you get a crash which says something like
-illegal operation or specification exception followed by a register dump
-You can restart linux & trace these using the tr prog <range or value> trace
-option.
-
-
-The most common ones you will normally be tracing for is:
-
-- 1=operation exception
-- 2=privileged operation exception
-- 4=protection exception
-- 5=addressing exception
-- 6=specification exception
-- 10=segment translation exception
-- 11=page translation exception
-
-The full list of these is on page 22 of the current s/390 Reference Summary.
-e.g.
-
-tr prog 10 will trace segment translation exceptions.
-
-tr prog on its own will trace all program interruption codes.
-
-Trace Sets
-----------
-On starting VM you are initially in the INITIAL trace set.
-You can do a Q TR to verify this.
-If you have a complex tracing situation where you wish to wait for instance
-till a driver is open before you start tracing IO, but know in your
-heart that you are going to have to make several runs through the code till you
-have a clue whats going on.
-
-What you can do is::
-
- TR I PSWA <Driver open address>
-
-hit b to continue till breakpoint
-
-reach the breakpoint
-
-now do your::
-
- TR GOTO B
- TR IO 7c08-7c09 inst int run
-
-or whatever the IO channels you wish to trace are & hit b
-
-To got back to the initial trace set do::
-
- TR GOTO INITIAL
-
-& the TR I PSWA <Driver open address> will be the only active breakpoint again.
-
-
-Tracing linux syscalls under VM
--------------------------------
-Syscalls are implemented on Linux for S390 by the Supervisor call instruction
-(SVC). There 256 possibilities of these as the instruction is made up of a 0xA
-opcode and the second byte being the syscall number. They are traced using the
-simple command::
-
- TR SVC <Optional value or range>
-
-the syscalls are defined in linux/arch/s390/include/asm/unistd.h
-e.g. to trace all file opens just do::
-
- TR SVC 5 ( as this is the syscall number of open )
-
-
-SMP Specific commands
----------------------
-To find out how many cpus you have
-Q CPUS displays all the CPU's available to your virtual machine
-To find the cpu that the current cpu VM debugger commands are being directed at
-do Q CPU to change the current cpu VM debugger commands are being directed at
-do::
-
- CPU <desired cpu no>
-
-On a SMP guest issue a command to all CPUs try prefixing the command with cpu
-all. To issue a command to a particular cpu try cpu <cpu number> e.g.::
-
- CPU 01 TR I R 2000.3000
-
-If you are running on a guest with several cpus & you have a IO related problem
-& cannot follow the flow of code but you know it isn't smp related.
-
-from the bash prompt issue::
-
- shutdown -h now or halt.
-
-do a::
-
- Q CPUS
-
-to find out how many cpus you have detach each one of them from cp except
-cpu 0 by issuing a::
-
- DETACH CPU 01-(number of cpus in configuration)
-
-& boot linux again.
-
-TR SIGP
- will trace inter processor signal processor instructions.
-
-DEFINE CPU 01-(number in configuration)
- will get your guests cpus back.
-
-
-Help for displaying ascii textstrings
--------------------------------------
-On the very latest VM Nucleus'es VM can now display ascii
-( thanks Neale for the hint ) by doing::
-
- D TX<lowaddr>.<len>
-
-e.g.::
-
- D TX0.100
-
-Alternatively
-=============
-Under older VM debuggers (I love EBDIC too) you can use following little
-program which converts a command line of hex digits to ascii text. It can be
-compiled under linux and you can copy the hex digits from your x3270 terminal
-to your xterm if you are debugging from a linuxbox.
-
-This is quite useful when looking at a parameter passed in as a text string
-under VM ( unless you are good at decoding ASCII in your head ).
-
-e.g. consider tracing an open syscall::
-
- TR SVC 5
-
-We have stopped at a breakpoint::
-
- 000151B0' SVC 0A05 -> 0001909A' CC 0
-
-D 20.8 to check the SVC old psw in the prefix area and see was it from userspace
-(for the layout of the prefix area consult the "Fixed Storage Locations"
-chapter of the s/390 Reference Summary if you have it available).
-
-::
-
- V00000020 070C2000 800151B2
-
-The problem state bit wasn't set & it's also too early in the boot sequence
-for it to be a userspace SVC if it was we would have to temporarily switch the
-psw to user space addressing so we could get at the first parameter of the open
-in gpr2.
-
-Next do a::
-
- D G2
- GPR 2 = 00014CB4
-
-Now display what gpr2 is pointing to::
-
- D 00014CB4.20
- V00014CB4 2F646576 2F636F6E 736F6C65 00001BF5
- V00014CC4 FC00014C B4001001 E0001000 B8070707
-
-Now copy the text till the first 00 hex ( which is the end of the string
-to an xterm & do hex2ascii on it::
-
- hex2ascii 2F646576 2F636F6E 736F6C65 00
-
-outputs::
-
- Decoded Hex:=/ d e v / c o n s o l e 0x00
-
-We were opening the console device,
-
-You can compile the code below yourself for practice :-),
-
-::
-
- /*
- * hex2ascii.c
- * a useful little tool for converting a hexadecimal command line to ascii
- *
- * Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
- * (C) 2000 IBM Deutschland Entwicklung GmbH, IBM Corporation.
- */
- #include <stdio.h>
-
- int main(int argc,char *argv[])
- {
- int cnt1,cnt2,len,toggle=0;
- int startcnt=1;
- unsigned char c,hex;
-
- if(argc>1&&(strcmp(argv[1],"-a")==0))
- startcnt=2;
- printf("Decoded Hex:=");
- for(cnt1=startcnt;cnt1<argc;cnt1++)
- {
- len=strlen(argv[cnt1]);
- for(cnt2=0;cnt2<len;cnt2++)
- {
- c=argv[cnt1][cnt2];
- if(c>='0'&&c<='9')
- c=c-'0';
- if(c>='A'&&c<='F')
- c=c-'A'+10;
- if(c>='a'&&c<='f')
- c=c-'a'+10;
- switch(toggle)
- {
- case 0:
- hex=c<<4;
- toggle=1;
- break;
- case 1:
- hex+=c;
- if(hex<32||hex>127)
- {
- if(startcnt==1)
- printf("0x%02X ",(int)hex);
- else
- printf(".");
- }
- else
- {
- printf("%c",hex);
- if(startcnt==1)
- printf(" ");
- }
- toggle=0;
- break;
- }
- }
- }
- printf("\n");
- }
-
-
-
-
-Stack tracing under VM
-----------------------
-A basic backtrace
------------------
-
-Here are the tricks I use 9 out of 10 times it works pretty well,
-
-When your backchain reaches a dead end
---------------------------------------
-This can happen when an exception happens in the kernel and the kernel is
-entered twice. If you reach the NULL pointer at the end of the back chain you
-should be able to sniff further back if you follow the following tricks.
-1) A kernel address should be easy to recognise since it is in
-primary space & the problem state bit isn't set & also
-The Hi bit of the address is set.
-2) Another backchain should also be easy to recognise since it is an
-address pointing to another address approximately 100 bytes or 0x70 hex
-behind the current stackpointer.
-
-
-Here is some practice.
-
-boot the kernel & hit PA1 at some random time
-
-d g to display the gprs, this should display something like::
-
- GPR 0 = 00000001 00156018 0014359C 00000000
- GPR 4 = 00000001 001B8888 000003E0 00000000
- GPR 8 = 00100080 00100084 00000000 000FE000
- GPR 12 = 00010400 8001B2DC 8001B36A 000FFED8
-
-Note that GPR14 is a return address but as we are real men we are going to
-trace the stack.
-display 0x40 bytes after the stack pointer::
-
- V000FFED8 000FFF38 8001B838 80014C8E 000FFF38
- V000FFEE8 00000000 00000000 000003E0 00000000
- V000FFEF8 00100080 00100084 00000000 000FE000
- V000FFF08 00010400 8001B2DC 8001B36A 000FFED8
-
-
-Ah now look at whats in sp+56 (sp+0x38) this is 8001B36A our saved r14 if
-you look above at our stackframe & also agrees with GPR14.
-
-now backchain::
-
- d 000FFF38.40
-
-we now are taking the contents of SP to get our first backchain::
-
- V000FFF38 000FFFA0 00000000 00014995 00147094
- V000FFF48 00147090 001470A0 000003E0 00000000
- V000FFF58 00100080 00100084 00000000 001BF1D0
- V000FFF68 00010400 800149BA 80014CA6 000FFF38
-
-This displays a 2nd return address of 80014CA6
-
-now do::
-
- d 000FFFA0.40
-
-for our 3rd backchain::
-
- V000FFFA0 04B52002 0001107F 00000000 00000000
- V000FFFB0 00000000 00000000 FF000000 0001107F
- V000FFFC0 00000000 00000000 00000000 00000000
- V000FFFD0 00010400 80010802 8001085A 000FFFA0
-
-
-our 3rd return address is 8001085A
-
-as the 04B52002 looks suspiciously like rubbish it is fair to assume that the
-kernel entry routines for the sake of optimisation don't set up a backchain.
-
-now look at System.map to see if the addresses make any sense::
-
- grep -i 0001b3 System.map
-
-outputs among other things::
-
- 0001b304 T cpu_idle
-
-so 8001B36A
-is cpu_idle+0x66 ( quiet the cpu is asleep, don't wake it )
-
-::
-
- grep -i 00014 System.map
-
-produces among other things::
-
- 00014a78 T start_kernel
-
-so 0014CA6 is start_kernel+some hex number I can't add in my head.
-
-::
-
- grep -i 00108 System.map
-
-this produces::
-
- 00010800 T _stext
-
-so 8001085A is _stext+0x5a
-
-Congrats you've done your first backchain.
-
-
-
-s/390 & z/Architecture IO Overview
-==================================
-
-I am not going to give a course in 390 IO architecture as this would take me
-quite a while and I'm no expert. Instead I'll give a 390 IO architecture
-summary for Dummies. If you have the s/390 principles of operation available
-read this instead. If nothing else you may find a few useful keywords in here
-and be able to use them on a web search engine to find more useful information.
-
-Unlike other bus architectures modern 390 systems do their IO using mostly
-fibre optics and devices such as tapes and disks can be shared between several
-mainframes. Also S390 can support up to 65536 devices while a high end PC based
-system might be choking with around 64.
-
-Here is some of the common IO terminology:
-
-Subchannel:
- This is the logical number most IO commands use to talk to an IO device. There
- can be up to 0x10000 (65536) of these in a configuration, typically there are a
- few hundred. Under VM for simplicity they are allocated contiguously, however
- on the native hardware they are not. They typically stay consistent between
- boots provided no new hardware is inserted or removed.
-
- Under Linux for s390 we use these as IRQ's and also when issuing an IO command
- (CLEAR SUBCHANNEL, HALT SUBCHANNEL, MODIFY SUBCHANNEL, RESUME SUBCHANNEL,
- START SUBCHANNEL, STORE SUBCHANNEL and TEST SUBCHANNEL). We use this as the ID
- of the device we wish to talk to. The most important of these instructions are
- START SUBCHANNEL (to start IO), TEST SUBCHANNEL (to check whether the IO
- completed successfully) and HALT SUBCHANNEL (to kill IO). A subchannel can have
- up to 8 channel paths to a device, this offers redundancy if one is not
- available.
-
-Device Number:
- This number remains static and is closely tied to the hardware. There are 65536
- of these, made up of a CHPID (Channel Path ID, the most significant 8 bits) and
- another lsb 8 bits. These remain static even if more devices are inserted or
- removed from the hardware. There is a 1 to 1 mapping between subchannels and
- device numbers, provided devices aren't inserted or removed.
-
-Channel Control Words:
- CCWs are linked lists of instructions initially pointed to by an operation
- request block (ORB), which is initially given to Start Subchannel (SSCH)
- command along with the subchannel number for the IO subsystem to process
- while the CPU continues executing normal code.
- CCWs come in two flavours, Format 0 (24 bit for backward compatibility) and
- Format 1 (31 bit). These are typically used to issue read and write (and many
- other) instructions. They consist of a length field and an absolute address
- field.
-
- Each IO typically gets 1 or 2 interrupts, one for channel end (primary status)
- when the channel is idle, and the second for device end (secondary status).
- Sometimes you get both concurrently. You check how the IO went on by issuing a
- TEST SUBCHANNEL at each interrupt, from which you receive an Interruption
- response block (IRB). If you get channel and device end status in the IRB
- without channel checks etc. your IO probably went okay. If you didn't you
- probably need to examine the IRB, extended status word etc.
- If an error occurs, more sophisticated control units have a facility known as
- concurrent sense. This means that if an error occurs Extended sense information
- will be presented in the Extended status word in the IRB. If not you have to
- issue a subsequent SENSE CCW command after the test subchannel.
-
-
-TPI (Test pending interrupt) can also be used for polled IO, but in
-multitasking multiprocessor systems it isn't recommended except for
-checking special cases (i.e. non looping checks for pending IO etc.).
-
-Store Subchannel and Modify Subchannel can be used to examine and modify
-operating characteristics of a subchannel (e.g. channel paths).
-
-Other IO related Terms:
-
-Sysplex:
- S390's Clustering Technology
-QDIO:
- S390's new high speed IO architecture to support devices such as gigabit
- ethernet, this architecture is also designed to be forward compatible with
- upcoming 64 bit machines.
-
-
-General Concepts
-----------------
-
-Input Output Processors (IOP's) are responsible for communicating between
-the mainframe CPU's & the channel & relieve the mainframe CPU's from the
-burden of communicating with IO devices directly, this allows the CPU's to
-concentrate on data processing.
-
-IOP's can use one or more links ( known as channel paths ) to talk to each
-IO device. It first checks for path availability & chooses an available one,
-then starts ( & sometimes terminates IO ).
-There are two types of channel path: ESCON & the Parallel IO interface.
-
-IO devices are attached to control units, control units provide the
-logic to interface the channel paths & channel path IO protocols to
-the IO devices, they can be integrated with the devices or housed separately
-& often talk to several similar devices ( typical examples would be raid
-controllers or a control unit which connects to 1000 3270 terminals )::
-
-
- +---------------------------------------------------------------+
- | +-----+ +-----+ +-----+ +-----+ +----------+ +----------+ |
- | | CPU | | CPU | | CPU | | CPU | | Main | | Expanded | |
- | | | | | | | | | | Memory | | Storage | |
- | +-----+ +-----+ +-----+ +-----+ +----------+ +----------+ |
- |---------------------------------------------------------------+
- | IOP | IOP | IOP |
- |---------------------------------------------------------------
- | C | C | C | C | C | C | C | C | C | C | C | C | C | C | C | C |
- ----------------------------------------------------------------
- || ||
- || Bus & Tag Channel Path || ESCON
- || ====================== || Channel
- || || || || Path
- +----------+ +----------+ +----------+
- | | | | | |
- | CU | | CU | | CU |
- | | | | | |
- +----------+ +----------+ +----------+
- | | | | |
- +----------+ +----------+ +----------+ +----------+ +----------+
- |I/O Device| |I/O Device| |I/O Device| |I/O Device| |I/O Device|
- +----------+ +----------+ +----------+ +----------+ +----------+
- CPU = Central Processing Unit
- C = Channel
- IOP = IP Processor
- CU = Control Unit
-
-The 390 IO systems come in 2 flavours the current 390 machines support both
-
-The Older 360 & 370 Interface,sometimes called the Parallel I/O interface,
-sometimes called Bus-and Tag & sometimes Original Equipment Manufacturers
-Interface (OEMI).
-
-This byte wide Parallel channel path/bus has parity & data on the "Bus" cable
-and control lines on the "Tag" cable. These can operate in byte multiplex mode
-for sharing between several slow devices or burst mode and monopolize the
-channel for the whole burst. Up to 256 devices can be addressed on one of these
-cables. These cables are about one inch in diameter. The maximum unextended
-length supported by these cables is 125 Meters but this can be extended up to
-2km with a fibre optic channel extended such as a 3044. The maximum burst speed
-supported is 4.5 megabytes per second. However, some really old processors
-support only transfer rates of 3.0, 2.0 & 1.0 MB/sec.
-One of these paths can be daisy chained to up to 8 control units.
-
-
-ESCON if fibre optic it is also called FICON
-Was introduced by IBM in 1990. Has 2 fibre optic cables and uses either leds or
-lasers for communication at a signaling rate of up to 200 megabits/sec. As
-10bits are transferred for every 8 bits info this drops to 160 megabits/sec
-and to 18.6 Megabytes/sec once control info and CRC are added. ESCON only
-operates in burst mode.
-
-ESCONs typical max cable length is 3km for the led version and 20km for the
-laser version known as XDF (extended distance facility). This can be further
-extended by using an ESCON director which triples the above mentioned ranges.
-Unlike Bus & Tag as ESCON is serial it uses a packet switching architecture,
-the standard Bus & Tag control protocol is however present within the packets.
-Up to 256 devices can be attached to each control unit that uses one of these
-interfaces.
-
-Common 390 Devices include:
-Network adapters typically OSA2,3172's,2116's & OSA-E gigabit ethernet adapters,
-Consoles 3270 & 3215 (a teletype emulated under linux for a line mode console).
-DASD's direct access storage devices ( otherwise known as hard disks ).
-Tape Drives.
-CTC ( Channel to Channel Adapters ),
-ESCON or Parallel Cables used as a very high speed serial link
-between 2 machines.
-
-
-Debugging IO on s/390 & z/Architecture under VM
-===============================================
-
-Now we are ready to go on with IO tracing commands under VM
-
-A few self explanatory queries::
-
- Q OSA
- Q CTC
- Q DISK ( This command is CMS specific )
- Q DASD
-
-Q OSA on my machine returns::
-
- OSA 7C08 ON OSA 7C08 SUBCHANNEL = 0000
- OSA 7C09 ON OSA 7C09 SUBCHANNEL = 0001
- OSA 7C14 ON OSA 7C14 SUBCHANNEL = 0002
- OSA 7C15 ON OSA 7C15 SUBCHANNEL = 0003
-
-If you have a guest with certain privileges you may be able to see devices
-which don't belong to you. To avoid this, add the option V.
-e.g.::
-
- Q V OSA
-
-Now using the device numbers returned by this command we will
-Trace the io starting up on the first device 7c08 & 7c09
-In our simplest case we can trace the
-start subchannels
-like TR SSCH 7C08-7C09
-or the halt subchannels
-or TR HSCH 7C08-7C09
-MSCH's ,STSCH's I think you can guess the rest
-
-A good trick is tracing all the IO's and CCWS and spooling them into the reader
-of another VM guest so he can ftp the logfile back to his own machine. I'll do
-a small bit of this and give you a look at the output.
-
-1) Spool stdout to VM reader::
-
- SP PRT TO (another vm guest ) or * for the local vm guest
-
-2) Fill the reader with the trace::
-
- TR IO 7c08-7c09 INST INT CCW PRT RUN
-
-3) Start up linux::
-
- i 00c
-4) Finish the trace::
-
- TR END
-
-5) close the reader::
-
- C PRT
-
-6) list reader contents::
-
- RDRLIST
-
-7) copy it to linux4's minidisk::
-
- RECEIVE / LOG TXT A1 ( replace
-
-8)
-filel & press F11 to look at it
-You should see something like::
-
- 00020942' SSCH B2334000 0048813C CC 0 SCH 0000 DEV 7C08
- CPA 000FFDF0 PARM 00E2C9C4 KEY 0 FPI C0 LPM 80
- CCW 000FFDF0 E4200100 00487FE8 0000 E4240100 ........
- IDAL 43D8AFE8
- IDAL 0FB76000
- 00020B0A' I/O DEV 7C08 -> 000197BC' SCH 0000 PARM 00E2C9C4
- 00021628' TSCH B2354000 >> 00488164 CC 0 SCH 0000 DEV 7C08
- CCWA 000FFDF8 DEV STS 0C SCH STS 00 CNT 00EC
- KEY 0 FPI C0 CC 0 CTLS 4007
- 00022238' STSCH B2344000 >> 00488108 CC 0 SCH 0000 DEV 7C08
-
-If you don't like messing up your readed ( because you possibly booted from it )
-you can alternatively spool it to another readers guest.
-
-
-Other common VM device related commands
----------------------------------------------
-These commands are listed only because they have
-been of use to me in the past & may be of use to
-you too. For more complete info on each of the commands
-use type HELP <command> from CMS.
-
-detaching devices::
-
- DET <devno range>
- ATT <devno range> <guest>
-
-attach a device to guest * for your own guest
-
-READY <devno>
- cause VM to issue a fake interrupt.
-
-The VARY command is normally only available to VM administrators::
-
- VARY ON PATH <path> TO <devno range>
- VARY OFF PATH <PATH> FROM <devno range>
-
-This is used to switch on or off channel paths to devices.
-
-Q CHPID <channel path ID>
- This displays state of devices using this channel path
-
-D SCHIB <subchannel>
- This displays the subchannel information SCHIB block for the device.
- this I believe is also only available to administrators.
-
-DEFINE CTC <devno>
- defines a virtual CTC channel to channel connection
- 2 need to be defined on each guest for the CTC driver to use.
-
-COUPLE devno userid remote devno
- Joins a local virtual device to a remote virtual device
- ( commonly used for the CTC driver ).
-
-Building a VM ramdisk under CMS which linux can use::
-
- def vfb-<blocksize> <subchannel> <number blocks>
-
-blocksize is commonly 4096 for linux.
-
-Formatting it::
-
- format <subchannel> <driver letter e.g. x> (blksize <blocksize>
-
-Sharing a disk between multiple guests::
-
- LINK userid devno1 devno2 mode password
-
-
-
-GDB on S390
-===========
-N.B. if compiling for debugging gdb works better without optimisation
-( see Compiling programs for debugging )
-
-invocation
-----------
-gdb <victim program> <optional corefile>
-
-Online help
------------
-help: gives help on commands
-
-e.g.::
-
- help
- help display
-
-Note gdb's online help is very good use it.
-
-
-Assembly
---------
-info registers:
- displays registers other than floating point.
-
-info all-registers:
- displays floating points as well.
-
-disassemble:
- disassembles
-
-e.g.::
-
- disassemble without parameters will disassemble the current function
- disassemble $pc $pc+10
-
-Viewing & modifying variables
------------------------------
-print or p:
- displays variable or register
-
-e.g. p/x $sp will display the stack pointer
-
-display:
- prints variable or register each time program stops
-
-e.g.::
-
- display/x $pc will display the program counter
- display argc
-
-undisplay:
- undo's display's
-
-info breakpoints:
- shows all current breakpoints
-
-info stack:
- shows stack back trace (if this doesn't work too well, I'll show
- you the stacktrace by hand below).
-
-info locals:
- displays local variables.
-
-info args:
- display current procedure arguments.
-
-set args:
- will set argc & argv each time the victim program is invoked
-
-e.g.::
-
- set <variable>=value
- set argc=100
- set $pc=0
-
-
-
-Modifying execution
--------------------
-step:
- steps n lines of sourcecode
-
-step
- steps 1 line.
-
-step 100
- steps 100 lines of code.
-
-next:
- like step except this will not step into subroutines
-
-stepi:
- steps a single machine code instruction.
-
-e.g.::
-
- stepi 100
-
-nexti:
- steps a single machine code instruction but will not step into
- subroutines.
-
-finish:
- will run until exit of the current routine
-
-run:
- (re)starts a program
-
-cont:
- continues a program
-
-quit:
- exits gdb.
-
-
-breakpoints
-------------
-
-break
- sets a breakpoint
-
-e.g.::
-
- break main
- break *$pc
- break *0x400618
-
-Here's a really useful one for large programs
-
-rbr
- Set a breakpoint for all functions matching REGEXP
-
-e.g.::
-
- rbr 390
-
-will set a breakpoint with all functions with 390 in their name.
-
-info breakpoints
- lists all breakpoints
-
-delete:
- delete breakpoint by number or delete them all
-
-e.g.
-
-delete 1
- will delete the first breakpoint
-
-
-delete
- will delete them all
-
-watch:
- This will set a watchpoint ( usually hardware assisted ),
-
-This will watch a variable till it changes
-
-e.g.
-
-watch cnt
- will watch the variable cnt till it changes.
-
-As an aside unfortunately gdb's, architecture independent watchpoint code
-is inconsistent & not very good, watchpoints usually work but not always.
-
-info watchpoints:
- Display currently active watchpoints
-
-condition: ( another useful one )
- Specify breakpoint number N to break only if COND is true.
-
-Usage is `condition N COND`, where N is an integer and COND is an
-expression to be evaluated whenever breakpoint N is reached.
-
-
-
-User defined functions/macros
------------------------------
-define: ( Note this is very very useful,simple & powerful )
-
-usage define <name> <list of commands> end
-
-examples which you should consider putting into .gdbinit in your home
-directory::
-
- define d
- stepi
- disassemble $pc $pc+10
- end
- define e
- nexti
- disassemble $pc $pc+10
- end
-
-
-Other hard to classify stuff
-----------------------------
-signal n:
- sends the victim program a signal.
-
-e.g. `signal 3` will send a SIGQUIT.
-
-info signals:
- what gdb does when the victim receives certain signals.
-
-list:
-
-e.g.:
-
-list
- lists current function source
-list 1,10
- list first 10 lines of current file.
-
-list test.c:1,10
-
-
-directory:
- Adds directories to be searched for source if gdb cannot find the source.
- (note it is a bit sensitive about slashes)
-
-e.g. To add the root of the filesystem to the searchpath do::
-
- directory //
-
-
-call <function>
-This calls a function in the victim program, this is pretty powerful
-e.g.
-(gdb) call printf("hello world")
-outputs:
-$1 = 11
-
-You might now be thinking that the line above didn't work, something extra had
-to be done.
-(gdb) call fflush(stdout)
-hello world$2 = 0
-As an aside the debugger also calls malloc & free under the hood
-to make space for the "hello world" string.
-
-
-
-hints
------
-1) command completion works just like bash
- ( if you are a bad typist like me this really helps )
-
-e.g. hit br <TAB> & cursor up & down :-).
-
-2) if you have a debugging problem that takes a few steps to recreate
-put the steps into a file called .gdbinit in your current working directory
-if you have defined a few extra useful user defined commands put these in
-your home directory & they will be read each time gdb is launched.
-
-A typical .gdbinit file might be.::
-
- break main
- run
- break runtime_exception
- cont
-
-
-stack chaining in gdb by hand
------------------------------
-This is done using a the same trick described for VM::
-
- p/x (*($sp+56))&0x7fffffff
-
-get the first backchain.
-
-For z/Architecture
-Replace 56 with 112 & ignore the &0x7fffffff
-in the macros below & do nasty casts to longs like the following
-as gdb unfortunately deals with printed arguments as ints which
-messes up everything.
-
-i.e. here is a 3rd backchain dereference::
-
- p/x *(long *)(***(long ***)$sp+112)
-
-
-this outputs::
-
- $5 = 0x528f18
-
-on my machine.
-
-Now you can use::
-
- info symbol (*($sp+56))&0x7fffffff
-
-you might see something like::
-
- rl_getc + 36 in section .text
-
-telling you what is located at address 0x528f18
-Now do::
-
- p/x (*(*$sp+56))&0x7fffffff
-
-This outputs::
-
- $6 = 0x528ed0
-
-Now do::
-
- info symbol (*(*$sp+56))&0x7fffffff
- rl_read_key + 180 in section .text
-
-now do::
-
- p/x (*(**$sp+56))&0x7fffffff
-
-& so on.
-
-Disassembling instructions without debug info
----------------------------------------------
-gdb typically complains if there is a lack of debugging
-symbols in the disassemble command with
-"No function contains specified address." To get around
-this do::
-
- x/<number lines to disassemble>xi <address>
-
-e.g.::
-
- x/20xi 0x400730
-
-
-
-Note:
- Remember gdb has history just like bash you don't need to retype the
- whole line just use the up & down arrows.
-
-
-
-For more info
--------------
-From your linuxbox do::
-
- man gdb
-
-or::
-
- info gdb.
-
-core dumps
-----------
-
-What a core dump ?
-^^^^^^^^^^^^^^^^^^
-
-A core dump is a file generated by the kernel (if allowed) which contains the
-registers and all active pages of the program which has crashed.
-
-From this file gdb will allow you to look at the registers, stack trace and
-memory of the program as if it just crashed on your system. It is usually
-called core and created in the current working directory.
-
-This is very useful in that a customer can mail a core dump to a technical
-support department and the technical support department can reconstruct what
-happened. Provided they have an identical copy of this program with debugging
-symbols compiled in and the source base of this build is available.
-
-In short it is far more useful than something like a crash log could ever hope
-to be.
-
-Why have I never seen one ?
-^^^^^^^^^^^^^^^^^^^^^^^^^^^
-
-Probably because you haven't used the command::
-
- ulimit -c unlimited in bash
-
-to allow core dumps, now do::
-
- ulimit -a
-
-to verify that the limit was accepted.
-
-A sample core dump
- To create this I'm going to do::
-
- ulimit -c unlimited
- gdb
-
-to launch gdb (my victim app. ) now be bad & do the following from another
-telnet/xterm session to the same machine::
-
- ps -aux | grep gdb
- kill -SIGSEGV <gdb's pid>
-
-or alternatively use `killall -SIGSEGV gdb` if you have the killall command.
-
-Now look at the core dump::
-
- ./gdb core
-
-Displays the following::
-
- GNU gdb 4.18
- Copyright 1998 Free Software Foundation, Inc.
- GDB is free software, covered by the GNU General Public License, and you are
- welcome to change it and/or distribute copies of it under certain conditions.
- Type "show copying" to see the conditions.
- There is absolutely no warranty for GDB. Type "show warranty" for details.
- This GDB was configured as "s390-ibm-linux"...
- Core was generated by `./gdb'.
- Program terminated with signal 11, Segmentation fault.
- Reading symbols from /usr/lib/libncurses.so.4...done.
- Reading symbols from /lib/libm.so.6...done.
- Reading symbols from /lib/libc.so.6...done.
- Reading symbols from /lib/ld-linux.so.2...done.
- #0 0x40126d1a in read () from /lib/libc.so.6
- Setting up the environment for debugging gdb.
- Breakpoint 1 at 0x4dc6f8: file utils.c, line 471.
- Breakpoint 2 at 0x4d87a4: file top.c, line 2609.
- (top-gdb) info stack
- #0 0x40126d1a in read () from /lib/libc.so.6
- #1 0x528f26 in rl_getc (stream=0x7ffffde8) at input.c:402
- #2 0x528ed0 in rl_read_key () at input.c:381
- #3 0x5167e6 in readline_internal_char () at readline.c:454
- #4 0x5168ee in readline_internal_charloop () at readline.c:507
- #5 0x51692c in readline_internal () at readline.c:521
- #6 0x5164fe in readline (prompt=0x7ffff810)
- at readline.c:349
- #7 0x4d7a8a in command_line_input (prompt=0x564420 "(gdb) ", repeat=1,
- annotation_suffix=0x4d6b44 "prompt") at top.c:2091
- #8 0x4d6cf0 in command_loop () at top.c:1345
- #9 0x4e25bc in main (argc=1, argv=0x7ffffdf4) at main.c:635
-
-
-LDD
-===
-This is a program which lists the shared libraries which a library needs,
-Note you also get the relocations of the shared library text segments which
-help when using objdump --source.
-
-e.g.::
-
- ldd ./gdb
-
-outputs::
-
- libncurses.so.4 => /usr/lib/libncurses.so.4 (0x40018000)
- libm.so.6 => /lib/libm.so.6 (0x4005e000)
- libc.so.6 => /lib/libc.so.6 (0x40084000)
- /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x40000000)
-
-
-Debugging shared libraries
-==========================
-Most programs use shared libraries, however it can be very painful
-when you single step instruction into a function like printf for the
-first time & you end up in functions like _dl_runtime_resolve this is
-the ld.so doing lazy binding, lazy binding is a concept in ELF where
-shared library functions are not loaded into memory unless they are
-actually used, great for saving memory but a pain to debug.
-
-To get around this either relink the program -static or exit gdb type
-export LD_BIND_NOW=true this will stop lazy binding & restart the gdb'ing
-the program in question.
-
-
-
-Debugging modules
-=================
-As modules are dynamically loaded into the kernel their address can be
-anywhere to get around this use the -m option with insmod to emit a load
-map which can be piped into a file if required.
-
-The proc file system
-====================
-What is it ?.
-It is a filesystem created by the kernel with files which are created on demand
-by the kernel if read, or can be used to modify kernel parameters,
-it is a powerful concept.
-
-e.g.::
-
- cat /proc/sys/net/ipv4/ip_forward
-
-On my machine outputs::
-
- 0
-
-telling me ip_forwarding is not on to switch it on I can do::
-
- echo 1 > /proc/sys/net/ipv4/ip_forward
-
-cat it again::
-
- cat /proc/sys/net/ipv4/ip_forward
-
-On my machine now outputs::
-
- 1
-
-IP forwarding is on.
-
-There is a lot of useful info in here best found by going in and having a look
-around, so I'll take you through some entries I consider important.
-
-All the processes running on the machine have their own entry defined by
-/proc/<pid>
-
-So lets have a look at the init process::
-
- cd /proc/1
- cat cmdline
-
-emits::
-
- init [2]
-
-::
-
- cd /proc/1/fd
-
-This contains numerical entries of all the open files,
-some of these you can cat e.g. stdout (2)::
-
- cat /proc/29/maps
-
-on my machine emits::
-
- 00400000-00478000 r-xp 00000000 5f:00 4103 /bin/bash
- 00478000-0047e000 rw-p 00077000 5f:00 4103 /bin/bash
- 0047e000-00492000 rwxp 00000000 00:00 0
- 40000000-40015000 r-xp 00000000 5f:00 14382 /lib/ld-2.1.2.so
- 40015000-40016000 rw-p 00014000 5f:00 14382 /lib/ld-2.1.2.so
- 40016000-40017000 rwxp 00000000 00:00 0
- 40017000-40018000 rw-p 00000000 00:00 0
- 40018000-4001b000 r-xp 00000000 5f:00 14435 /lib/libtermcap.so.2.0.8
- 4001b000-4001c000 rw-p 00002000 5f:00 14435 /lib/libtermcap.so.2.0.8
- 4001c000-4010d000 r-xp 00000000 5f:00 14387 /lib/libc-2.1.2.so
- 4010d000-40111000 rw-p 000f0000 5f:00 14387 /lib/libc-2.1.2.so
- 40111000-40114000 rw-p 00000000 00:00 0
- 40114000-4011e000 r-xp 00000000 5f:00 14408 /lib/libnss_files-2.1.2.so
- 4011e000-4011f000 rw-p 00009000 5f:00 14408 /lib/libnss_files-2.1.2.so
- 7fffd000-80000000 rwxp ffffe000 00:00 0
-
-
-Showing us the shared libraries init uses where they are in memory
-& memory access permissions for each virtual memory area.
-
-/proc/1/cwd is a softlink to the current working directory.
-
-/proc/1/root is the root of the filesystem for this process.
-
-/proc/1/mem is the current running processes memory which you
-can read & write to like a file.
-
-strace uses this sometimes as it is a bit faster than the
-rather inefficient ptrace interface for peeking at DATA.
-
-::
-
- cat status
-
- Name: init
- State: S (sleeping)
- Pid: 1
- PPid: 0
- Uid: 0 0 0 0
- Gid: 0 0 0 0
- Groups:
- VmSize: 408 kB
- VmLck: 0 kB
- VmRSS: 208 kB
- VmData: 24 kB
- VmStk: 8 kB
- VmExe: 368 kB
- VmLib: 0 kB
- SigPnd: 0000000000000000
- SigBlk: 0000000000000000
- SigIgn: 7fffffffd7f0d8fc
- SigCgt: 00000000280b2603
- CapInh: 00000000fffffeff
- CapPrm: 00000000ffffffff
- CapEff: 00000000fffffeff
-
- User PSW: 070de000 80414146
- task: 004b6000 tss: 004b62d8 ksp: 004b7ca8 pt_regs: 004b7f68
- User GPRS:
- 00000400 00000000 0000000b 7ffffa90
- 00000000 00000000 00000000 0045d9f4
- 0045cafc 7ffffa90 7fffff18 0045cb08
- 00010400 804039e8 80403af8 7ffff8b0
- User ACRS:
- 00000000 00000000 00000000 00000000
- 00000001 00000000 00000000 00000000
- 00000000 00000000 00000000 00000000
- 00000000 00000000 00000000 00000000
- Kernel BackChain CallChain BackChain CallChain
- 004b7ca8 8002bd0c 004b7d18 8002b92c
- 004b7db8 8005cd50 004b7e38 8005d12a
- 004b7f08 80019114
-
-Showing among other things memory usage & status of some signals &
-the processes'es registers from the kernel task_structure
-as well as a backchain which may be useful if a process crashes
-in the kernel for some unknown reason.
-
-Some driver debugging techniques
-================================
-debug feature
--------------
-Some of our drivers now support a "debug feature" in
-/proc/s390dbf see s390dbf.txt in the linux/Documentation directory
-for more info.
-
-e.g.
-to switch on the lcs "debug feature"::
-
- echo 5 > /proc/s390dbf/lcs/level
-
-& then after the error occurred::
-
- cat /proc/s390dbf/lcs/sprintf >/logfile
-
-the logfile now contains some information which may help
-tech support resolve a problem in the field.
-
-
-
-high level debugging network drivers
-------------------------------------
-ifconfig is a quite useful command
-it gives the current state of network drivers.
-
-If you suspect your network device driver is dead
-one way to check is type::
-
- ifconfig <network device>
-
-e.g. tr0
-
-You should see something like::
-
- ifconfig tr0
- tr0 Link encap:16/4 Mbps Token Ring (New) HWaddr 00:04:AC:20:8E:48
- inet addr:9.164.185.132 Bcast:9.164.191.255 Mask:255.255.224.0
- UP BROADCAST RUNNING MULTICAST MTU:2000 Metric:1
- RX packets:246134 errors:0 dropped:0 overruns:0 frame:0
- TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
- collisions:0 txqueuelen:100
-
-if the device doesn't say up
-try::
-
- /etc/rc.d/init.d/network start
-
-( this starts the network stack & hopefully calls ifconfig tr0 up ).
-ifconfig looks at the output of /proc/net/dev and presents it in a more
-presentable form.
-
-Now ping the device from a machine in the same subnet.
-
-if the RX packets count & TX packets counts don't increment you probably
-have problems.
-
-next::
-
- cat /proc/net/arp
-
-Do you see any hardware addresses in the cache if not you may have problems.
-Next try::
-
- ping -c 5 <broadcast_addr>
-
-i.e. the Bcast field above in the output of
-ifconfig. Do you see any replies from machines other than the local machine
-if not you may have problems. also if the TX packets count in ifconfig
-hasn't incremented either you have serious problems in your driver
-(e.g. the txbusy field of the network device being stuck on )
-or you may have multiple network devices connected.
-
-
-chandev
--------
-There is a new device layer for channel devices, some
-drivers e.g. lcs are registered with this layer.
-
-If the device uses the channel device layer you'll be
-able to find what interrupts it uses & the current state
-of the device.
-
-See the manpage chandev.8 &type cat /proc/chandev for more info.
-
-
-SysRq
-=====
-This is now supported by linux for s/390 & z/Architecture.
-
-To enable it do compile the kernel with::
-
- Kernel Hacking -> Magic SysRq Key Enabled
-
-Then::
-
- echo "1" > /proc/sys/kernel/sysrq
-
-also type::
-
- echo "8" >/proc/sys/kernel/printk
-
-To make printk output go to console.
-
-On 390 all commands are prefixed with::
-
- ^-
-
-e.g.::
-
- ^-t will show tasks.
- ^-? or some unknown command will display help.
-
-The sysrq key reading is very picky ( I have to type the keys in an
-xterm session & paste them into the x3270 console )
-& it may be wise to predefine the keys as described in the VM hints above
-
-This is particularly useful for syncing disks unmounting & rebooting
-if the machine gets partially hung.
-
-Read Documentation/admin-guide/sysrq.rst for more info
-
-References:
-===========
-- Enterprise Systems Architecture Reference Summary
-- Enterprise Systems Architecture Principles of Operation
-- Hartmut Penners s390 stack frame sheet.
-- IBM Mainframe Channel Attachment a technology brief from a CISCO webpage
-- Various bits of man & info pages of Linux.
-- Linux & GDB source.
-- Various info & man pages.
-- CMS Help on tracing commands.
-- Linux for s/390 Elf Application Binary Interface
-- Linux for z/Series Elf Application Binary Interface ( Both Highly Recommended )
-- z/Architecture Principles of Operation SA22-7832-00
-- Enterprise Systems Architecture/390 Reference Summary SA22-7209-01 & the
-- Enterprise Systems Architecture/390 Principles of Operation SA22-7201-05
-
-Special Thanks
-==============
-Special thanks to Neale Ferguson who maintains a much
-prettier HTML version of this page at
-http://linuxvm.org/penguinvm/
-Bob Grainger Stefan Bader & others for reporting bugs
diff --git a/Documentation/s390/index.rst b/Documentation/s390/index.rst
index f8c01cb7fa37..f7af2061e406 100644
--- a/Documentation/s390/index.rst
+++ b/Documentation/s390/index.rst
@@ -7,7 +7,6 @@ s390 Architecture
cds
3270
- debugging390
driver-model
monreader
qeth