Merge tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big set of USB and PHY driver patches for 5.2-rc1

  There is the usual set of:

   - USB gadget updates

   - PHY driver updates and additions

   - USB serial driver updates and fixes

   - typec updates and new chips supported

   - mtu3 driver updates

   - xhci driver updates

   - other tiny driver updates

  Nothing really interesting, just constant forward progress.

  All of these have been in linux-next for a while with no reported
  issues. The usb-gadget and usb-serial trees were merged a bit "late",
  but both of them had been in linux-next before they got merged here
  last Friday"

* tag 'usb-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (206 commits)
  USB: serial: f81232: implement break control
  USB: serial: f81232: add high baud rate support
  USB: serial: f81232: clear overrun flag
  USB: serial: f81232: fix interrupt worker not stop
  usb: dwc3: Rename DWC3_DCTL_LPM_ERRATA
  usb: dwc3: Fix default lpm_nyet_threshold value
  usb: dwc3: debug: Print GET_STATUS(device) tracepoint
  usb: dwc3: Do core validation early on probe
  usb: dwc3: gadget: Set lpm_capable
  usb: gadget: atmel: tie wake lock to running clock
  usb: gadget: atmel: support USB suspend
  usb: gadget: atmel_usba_udc: simplify setting of interrupt-enabled mask
  dwc2: gadget: Fix completed transfer size calculation in DDMA
  usb: dwc2: Set lpm mode parameters depend on HW configuration
  usb: dwc2: Fix channel disable flow
  usb: dwc2: Set actual frame number for completed ISOC transfer
  usb: gadget: do not use __constant_cpu_to_le16
  usb: dwc2: gadget: Increase descriptors count for ISOC's
  usb: introduce usb_ep_type_string() function
  usb: dwc3: move synchronize_irq() out of the spinlock protected block
  ...

1 files changed, 39 insertions, 36 deletions

diff --git a/Documentation/usb/gadget_serial.txt b/Documentation/usb/gadget_serial.txt
index d1def3186782..dce8bc1fb1f2 100644
--- a/Documentation/usb/gadget_serial.txt
+++ b/Documentation/usb/gadget_serial.txt
@@ -1,7 +1,10 @@
+===============================
+Linux Gadget Serial Driver v2.0
+===============================
 
-                 Linux Gadget Serial Driver v2.0
-                           11/20/2004
-                  (updated 8-May-2008 for v2.3)
+11/20/2004
+
+(updated 8-May-2008 for v2.3)
 
 
 License and Disclaimer
@@ -56,7 +59,7 @@ hardware; for example, a PDA, an embedded Linux system, or a PC
 with a USB development card.
 
 The gadget serial driver talks over USB to either a CDC ACM driver
-or a generic USB serial driver running on a host PC.
+or a generic USB serial driver running on a host PC::
 
    Host
    --------------------------------------
@@ -112,11 +115,11 @@ configuring the kernel.  Then rebuild and install the kernel or
 modules.
 
 Then you must load the gadget serial driver.  To load it as an
-ACM device (recommended for interoperability), do this:
+ACM device (recommended for interoperability), do this::
 
   modprobe g_serial
 
-To load it as a vendor specific bulk in/out device, do this:
+To load it as a vendor specific bulk in/out device, do this::
 
   modprobe g_serial use_acm=0
 
@@ -127,7 +130,7 @@ desired.
 
 Your system should use mdev (from busybox) or udev to make the
 device nodes.  After this gadget driver has been set up you should
-then see a /dev/ttyGS0 node:
+then see a /dev/ttyGS0 node::
 
   # ls -l /dev/ttyGS0 | cat
   crw-rw----    1 root     root     253,   0 May  8 14:10 /dev/ttyGS0
@@ -187,24 +190,24 @@ support".
 
 Once the gadget serial driver is loaded and the USB device connected
 to the Linux host with a USB cable, the host system should recognize
-the gadget serial device.  For example, the command
+the gadget serial device.  For example, the command::
 
   cat /sys/kernel/debug/usb/devices
 
-should show something like this:
-
-T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  5 Spd=480 MxCh= 0
-D:  Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
-P:  Vendor=0525 ProdID=a4a7 Rev= 2.01
-S:  Manufacturer=Linux 2.6.8.1 with net2280
-S:  Product=Gadget Serial
-S:  SerialNumber=0
-C:* #Ifs= 2 Cfg#= 2 Atr=c0 MxPwr=  2mA
-I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
-E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
-I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm
-E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+should show something like this:::
+
+  T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  5 Spd=480 MxCh= 0
+  D:  Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
+  P:  Vendor=0525 ProdID=a4a7 Rev= 2.01
+  S:  Manufacturer=Linux 2.6.8.1 with net2280
+  S:  Product=Gadget Serial
+  S:  SerialNumber=0
+  C:* #Ifs= 2 Cfg#= 2 Atr=c0 MxPwr=  2mA
+  I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
+  E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
+  I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm
+  E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+  E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 
 If the host side Linux system is configured properly, the ACM driver
 should be loaded automatically.  The command "lsmod" should show the
@@ -219,29 +222,29 @@ Serial Converter support", and for the "USB Generic Serial Driver".
 
 Once the gadget serial driver is loaded and the USB device connected
 to the Linux host with a USB cable, the host system should recognize
-the gadget serial device.  For example, the command
+the gadget serial device.  For example, the command::
 
   cat /sys/kernel/debug/usb/devices
 
-should show something like this:
+should show something like this:::
 
-T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  6 Spd=480 MxCh= 0
-D:  Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
-P:  Vendor=0525 ProdID=a4a6 Rev= 2.01
-S:  Manufacturer=Linux 2.6.8.1 with net2280
-S:  Product=Gadget Serial
-S:  SerialNumber=0
-C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
-I:  If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=serial
-E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
-E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+  T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  6 Spd=480 MxCh= 0
+  D:  Ver= 2.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
+  P:  Vendor=0525 ProdID=a4a6 Rev= 2.01
+  S:  Manufacturer=Linux 2.6.8.1 with net2280
+  S:  Product=Gadget Serial
+  S:  SerialNumber=0
+  C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
+  I:  If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=serial
+  E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
+  E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 
 You must load the usbserial driver and explicitly set its parameters
-to configure it to recognize the gadget serial device, like this:
+to configure it to recognize the gadget serial device, like this::
 
   echo 0x0525 0xA4A6 >/sys/bus/usb-serial/drivers/generic/new_id
 
-The legacy way is to use module parameters:
+The legacy way is to use module parameters::
 
   modprobe usbserial vendor=0x0525 product=0xA4A6