summaryrefslogtreecommitdiff
path: root/Documentation/virtual
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-05-17 10:33:30 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2019-05-17 10:33:30 -0700
commit0ef0fd351550130129bbdb77362488befd7b69d2 (patch)
tree23186172f5f85c06e18e3ee1a9619879df03c5df /Documentation/virtual
parent4489da7183099f569a7d3dd819c975073c04bc72 (diff)
parentc011d23ba046826ccf8c4a4a6c1d01c9ccaa1403 (diff)
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM updates from Paolo Bonzini: "ARM: - support for SVE and Pointer Authentication in guests - PMU improvements POWER: - support for direct access to the POWER9 XIVE interrupt controller - memory and performance optimizations x86: - support for accessing memory not backed by struct page - fixes and refactoring Generic: - dirty page tracking improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (155 commits) kvm: fix compilation on aarch64 Revert "KVM: nVMX: Expose RDPMC-exiting only when guest supports PMU" kvm: x86: Fix L1TF mitigation for shadow MMU KVM: nVMX: Disable intercept for FS/GS base MSRs in vmcs02 when possible KVM: PPC: Book3S: Remove useless checks in 'release' method of KVM device KVM: PPC: Book3S HV: XIVE: Fix spelling mistake "acessing" -> "accessing" KVM: PPC: Book3S HV: Make sure to load LPID for radix VCPUs kvm: nVMX: Set nested_run_pending in vmx_set_nested_state after checks complete tests: kvm: Add tests for KVM_SET_NESTED_STATE KVM: nVMX: KVM_SET_NESTED_STATE - Tear down old EVMCS state before setting new state tests: kvm: Add tests for KVM_CAP_MAX_VCPUS and KVM_CAP_MAX_CPU_ID tests: kvm: Add tests to .gitignore KVM: Introduce KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 KVM: Fix kvm_clear_dirty_log_protect off-by-(minus-)one KVM: Fix the bitmap range to copy during clear dirty KVM: arm64: Fix ptrauth ID register masking logic KVM: x86: use direct accessors for RIP and RSP KVM: VMX: Use accessors for GPRs outside of dedicated caching logic KVM: x86: Omit caching logic for always-available GPRs kvm, x86: Properly check whether a pfn is an MMIO or not ...
Diffstat (limited to 'Documentation/virtual')
-rw-r--r--Documentation/virtual/kvm/api.txt225
-rw-r--r--Documentation/virtual/kvm/devices/vm.txt3
-rw-r--r--Documentation/virtual/kvm/devices/xive.txt197
3 files changed, 399 insertions, 26 deletions
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 64b38dfcc243..ba6c42c576dd 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -69,23 +69,6 @@ by and on behalf of the VM's process may not be freed/unaccounted when
the VM is shut down.
-It is important to note that althought VM ioctls may only be issued from
-the process that created the VM, a VM's lifecycle is associated with its
-file descriptor, not its creator (process). In other words, the VM and
-its resources, *including the associated address space*, are not freed
-until the last reference to the VM's file descriptor has been released.
-For example, if fork() is issued after ioctl(KVM_CREATE_VM), the VM will
-not be freed until both the parent (original) process and its child have
-put their references to the VM's file descriptor.
-
-Because a VM's resources are not freed until the last reference to its
-file descriptor is released, creating additional references to a VM via
-via fork(), dup(), etc... without careful consideration is strongly
-discouraged and may have unwanted side effects, e.g. memory allocated
-by and on behalf of the VM's process may not be freed/unaccounted when
-the VM is shut down.
-
-
3. Extensions
-------------
@@ -347,7 +330,7 @@ They must be less than the value that KVM_CHECK_EXTENSION returns for
the KVM_CAP_MULTI_ADDRESS_SPACE capability.
The bits in the dirty bitmap are cleared before the ioctl returns, unless
-KVM_CAP_MANUAL_DIRTY_LOG_PROTECT is enabled. For more information,
+KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 is enabled. For more information,
see the description of the capability.
4.9 KVM_SET_MEMORY_ALIAS
@@ -1117,9 +1100,8 @@ struct kvm_userspace_memory_region {
This ioctl allows the user to create, modify or delete a guest physical
memory slot. Bits 0-15 of "slot" specify the slot id and this value
should be less than the maximum number of user memory slots supported per
-VM. The maximum allowed slots can be queried using KVM_CAP_NR_MEMSLOTS,
-if this capability is supported by the architecture. Slots may not
-overlap in guest physical address space.
+VM. The maximum allowed slots can be queried using KVM_CAP_NR_MEMSLOTS.
+Slots may not overlap in guest physical address space.
If KVM_CAP_MULTI_ADDRESS_SPACE is available, bits 16-31 of "slot"
specifies the address space which is being modified. They must be
@@ -1901,6 +1883,12 @@ Architectures: all
Type: vcpu ioctl
Parameters: struct kvm_one_reg (in)
Returns: 0 on success, negative value on failure
+Errors:
+  ENOENT:   no such register
+  EINVAL:   invalid register ID, or no such register
+  EPERM:    (arm64) register access not allowed before vcpu finalization
+(These error codes are indicative only: do not rely on a specific error
+code being returned in a specific situation.)
struct kvm_one_reg {
__u64 id;
@@ -1985,6 +1973,7 @@ registers, find a list below:
PPC | KVM_REG_PPC_TLB3PS | 32
PPC | KVM_REG_PPC_EPTCFG | 32
PPC | KVM_REG_PPC_ICP_STATE | 64
+ PPC | KVM_REG_PPC_VP_STATE | 128
PPC | KVM_REG_PPC_TB_OFFSET | 64
PPC | KVM_REG_PPC_SPMC1 | 32
PPC | KVM_REG_PPC_SPMC2 | 32
@@ -2137,6 +2126,37 @@ contains elements ranging from 32 to 128 bits. The index is a 32bit
value in the kvm_regs structure seen as a 32bit array.
0x60x0 0000 0010 <index into the kvm_regs struct:16>
+Specifically:
+ Encoding Register Bits kvm_regs member
+----------------------------------------------------------------
+ 0x6030 0000 0010 0000 X0 64 regs.regs[0]
+ 0x6030 0000 0010 0002 X1 64 regs.regs[1]
+ ...
+ 0x6030 0000 0010 003c X30 64 regs.regs[30]
+ 0x6030 0000 0010 003e SP 64 regs.sp
+ 0x6030 0000 0010 0040 PC 64 regs.pc
+ 0x6030 0000 0010 0042 PSTATE 64 regs.pstate
+ 0x6030 0000 0010 0044 SP_EL1 64 sp_el1
+ 0x6030 0000 0010 0046 ELR_EL1 64 elr_el1
+ 0x6030 0000 0010 0048 SPSR_EL1 64 spsr[KVM_SPSR_EL1] (alias SPSR_SVC)
+ 0x6030 0000 0010 004a SPSR_ABT 64 spsr[KVM_SPSR_ABT]
+ 0x6030 0000 0010 004c SPSR_UND 64 spsr[KVM_SPSR_UND]
+ 0x6030 0000 0010 004e SPSR_IRQ 64 spsr[KVM_SPSR_IRQ]
+ 0x6060 0000 0010 0050 SPSR_FIQ 64 spsr[KVM_SPSR_FIQ]
+ 0x6040 0000 0010 0054 V0 128 fp_regs.vregs[0] (*)
+ 0x6040 0000 0010 0058 V1 128 fp_regs.vregs[1] (*)
+ ...
+ 0x6040 0000 0010 00d0 V31 128 fp_regs.vregs[31] (*)
+ 0x6020 0000 0010 00d4 FPSR 32 fp_regs.fpsr
+ 0x6020 0000 0010 00d5 FPCR 32 fp_regs.fpcr
+
+(*) These encodings are not accepted for SVE-enabled vcpus. See
+ KVM_ARM_VCPU_INIT.
+
+ The equivalent register content can be accessed via bits [127:0] of
+ the corresponding SVE Zn registers instead for vcpus that have SVE
+ enabled (see below).
+
arm64 CCSIDR registers are demultiplexed by CSSELR value:
0x6020 0000 0011 00 <csselr:8>
@@ -2146,6 +2166,64 @@ arm64 system registers have the following id bit patterns:
arm64 firmware pseudo-registers have the following bit pattern:
0x6030 0000 0014 <regno:16>
+arm64 SVE registers have the following bit patterns:
+ 0x6080 0000 0015 00 <n:5> <slice:5> Zn bits[2048*slice + 2047 : 2048*slice]
+ 0x6050 0000 0015 04 <n:4> <slice:5> Pn bits[256*slice + 255 : 256*slice]
+ 0x6050 0000 0015 060 <slice:5> FFR bits[256*slice + 255 : 256*slice]
+ 0x6060 0000 0015 ffff KVM_REG_ARM64_SVE_VLS pseudo-register
+
+Access to register IDs where 2048 * slice >= 128 * max_vq will fail with
+ENOENT. max_vq is the vcpu's maximum supported vector length in 128-bit
+quadwords: see (**) below.
+
+These registers are only accessible on vcpus for which SVE is enabled.
+See KVM_ARM_VCPU_INIT for details.
+
+In addition, except for KVM_REG_ARM64_SVE_VLS, these registers are not
+accessible until the vcpu's SVE configuration has been finalized
+using KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE). See KVM_ARM_VCPU_INIT
+and KVM_ARM_VCPU_FINALIZE for more information about this procedure.
+
+KVM_REG_ARM64_SVE_VLS is a pseudo-register that allows the set of vector
+lengths supported by the vcpu to be discovered and configured by
+userspace. When transferred to or from user memory via KVM_GET_ONE_REG
+or KVM_SET_ONE_REG, the value of this register is of type
+__u64[KVM_ARM64_SVE_VLS_WORDS], and encodes the set of vector lengths as
+follows:
+
+__u64 vector_lengths[KVM_ARM64_SVE_VLS_WORDS];
+
+if (vq >= SVE_VQ_MIN && vq <= SVE_VQ_MAX &&
+ ((vector_lengths[(vq - KVM_ARM64_SVE_VQ_MIN) / 64] >>
+ ((vq - KVM_ARM64_SVE_VQ_MIN) % 64)) & 1))
+ /* Vector length vq * 16 bytes supported */
+else
+ /* Vector length vq * 16 bytes not supported */
+
+(**) The maximum value vq for which the above condition is true is
+max_vq. This is the maximum vector length available to the guest on
+this vcpu, and determines which register slices are visible through
+this ioctl interface.
+
+(See Documentation/arm64/sve.txt for an explanation of the "vq"
+nomenclature.)
+
+KVM_REG_ARM64_SVE_VLS is only accessible after KVM_ARM_VCPU_INIT.
+KVM_ARM_VCPU_INIT initialises it to the best set of vector lengths that
+the host supports.
+
+Userspace may subsequently modify it if desired until the vcpu's SVE
+configuration is finalized using KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE).
+
+Apart from simply removing all vector lengths from the host set that
+exceed some value, support for arbitrarily chosen sets of vector lengths
+is hardware-dependent and may not be available. Attempting to configure
+an invalid set of vector lengths via KVM_SET_ONE_REG will fail with
+EINVAL.
+
+After the vcpu's SVE configuration is finalized, further attempts to
+write this register will fail with EPERM.
+
MIPS registers are mapped using the lower 32 bits. The upper 16 of that is
the register group type:
@@ -2198,6 +2276,12 @@ Architectures: all
Type: vcpu ioctl
Parameters: struct kvm_one_reg (in and out)
Returns: 0 on success, negative value on failure
+Errors include:
+  ENOENT:   no such register
+  EINVAL:   invalid register ID, or no such register
+  EPERM:    (arm64) register access not allowed before vcpu finalization
+(These error codes are indicative only: do not rely on a specific error
+code being returned in a specific situation.)
This ioctl allows to receive the value of a single register implemented
in a vcpu. The register to read is indicated by the "id" field of the
@@ -2690,6 +2774,49 @@ Possible features:
- KVM_ARM_VCPU_PMU_V3: Emulate PMUv3 for the CPU.
Depends on KVM_CAP_ARM_PMU_V3.
+ - KVM_ARM_VCPU_PTRAUTH_ADDRESS: Enables Address Pointer authentication
+ for arm64 only.
+ Depends on KVM_CAP_ARM_PTRAUTH_ADDRESS.
+ If KVM_CAP_ARM_PTRAUTH_ADDRESS and KVM_CAP_ARM_PTRAUTH_GENERIC are
+ both present, then both KVM_ARM_VCPU_PTRAUTH_ADDRESS and
+ KVM_ARM_VCPU_PTRAUTH_GENERIC must be requested or neither must be
+ requested.
+
+ - KVM_ARM_VCPU_PTRAUTH_GENERIC: Enables Generic Pointer authentication
+ for arm64 only.
+ Depends on KVM_CAP_ARM_PTRAUTH_GENERIC.
+ If KVM_CAP_ARM_PTRAUTH_ADDRESS and KVM_CAP_ARM_PTRAUTH_GENERIC are
+ both present, then both KVM_ARM_VCPU_PTRAUTH_ADDRESS and
+ KVM_ARM_VCPU_PTRAUTH_GENERIC must be requested or neither must be
+ requested.
+
+ - KVM_ARM_VCPU_SVE: Enables SVE for the CPU (arm64 only).
+ Depends on KVM_CAP_ARM_SVE.
+ Requires KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE):
+
+ * After KVM_ARM_VCPU_INIT:
+
+ - KVM_REG_ARM64_SVE_VLS may be read using KVM_GET_ONE_REG: the
+ initial value of this pseudo-register indicates the best set of
+ vector lengths possible for a vcpu on this host.
+
+ * Before KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE):
+
+ - KVM_RUN and KVM_GET_REG_LIST are not available;
+
+ - KVM_GET_ONE_REG and KVM_SET_ONE_REG cannot be used to access
+ the scalable archietctural SVE registers
+ KVM_REG_ARM64_SVE_ZREG(), KVM_REG_ARM64_SVE_PREG() or
+ KVM_REG_ARM64_SVE_FFR;
+
+ - KVM_REG_ARM64_SVE_VLS may optionally be written using
+ KVM_SET_ONE_REG, to modify the set of vector lengths available
+ for the vcpu.
+
+ * After KVM_ARM_VCPU_FINALIZE(KVM_ARM_VCPU_SVE):
+
+ - the KVM_REG_ARM64_SVE_VLS pseudo-register is immutable, and can
+ no longer be written using KVM_SET_ONE_REG.
4.83 KVM_ARM_PREFERRED_TARGET
@@ -3809,7 +3936,7 @@ to I/O ports.
4.117 KVM_CLEAR_DIRTY_LOG (vm ioctl)
-Capability: KVM_CAP_MANUAL_DIRTY_LOG_PROTECT
+Capability: KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2
Architectures: x86, arm, arm64, mips
Type: vm ioctl
Parameters: struct kvm_dirty_log (in)
@@ -3842,10 +3969,10 @@ the address space for which you want to return the dirty bitmap.
They must be less than the value that KVM_CHECK_EXTENSION returns for
the KVM_CAP_MULTI_ADDRESS_SPACE capability.
-This ioctl is mostly useful when KVM_CAP_MANUAL_DIRTY_LOG_PROTECT
+This ioctl is mostly useful when KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2
is enabled; for more information, see the description of the capability.
However, it can always be used as long as KVM_CHECK_EXTENSION confirms
-that KVM_CAP_MANUAL_DIRTY_LOG_PROTECT is present.
+that KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 is present.
4.118 KVM_GET_SUPPORTED_HV_CPUID
@@ -3904,6 +4031,40 @@ number of valid entries in the 'entries' array, which is then filled.
'index' and 'flags' fields in 'struct kvm_cpuid_entry2' are currently reserved,
userspace should not expect to get any particular value there.
+4.119 KVM_ARM_VCPU_FINALIZE
+
+Architectures: arm, arm64
+Type: vcpu ioctl
+Parameters: int feature (in)
+Returns: 0 on success, -1 on error
+Errors:
+ EPERM: feature not enabled, needs configuration, or already finalized
+ EINVAL: feature unknown or not present
+
+Recognised values for feature:
+ arm64 KVM_ARM_VCPU_SVE (requires KVM_CAP_ARM_SVE)
+
+Finalizes the configuration of the specified vcpu feature.
+
+The vcpu must already have been initialised, enabling the affected feature, by
+means of a successful KVM_ARM_VCPU_INIT call with the appropriate flag set in
+features[].
+
+For affected vcpu features, this is a mandatory step that must be performed
+before the vcpu is fully usable.
+
+Between KVM_ARM_VCPU_INIT and KVM_ARM_VCPU_FINALIZE, the feature may be
+configured by use of ioctls such as KVM_SET_ONE_REG. The exact configuration
+that should be performaned and how to do it are feature-dependent.
+
+Other calls that depend on a particular feature being finalized, such as
+KVM_RUN, KVM_GET_REG_LIST, KVM_GET_ONE_REG and KVM_SET_ONE_REG, will fail with
+-EPERM unless the feature has already been finalized by means of a
+KVM_ARM_VCPU_FINALIZE call.
+
+See KVM_ARM_VCPU_INIT for details of vcpu features that require finalization
+using this ioctl.
+
5. The kvm_run structure
------------------------
@@ -4505,6 +4666,15 @@ struct kvm_sync_regs {
struct kvm_vcpu_events events;
};
+6.75 KVM_CAP_PPC_IRQ_XIVE
+
+Architectures: ppc
+Target: vcpu
+Parameters: args[0] is the XIVE device fd
+ args[1] is the XIVE CPU number (server ID) for this vcpu
+
+This capability connects the vcpu to an in-kernel XIVE device.
+
7. Capabilities that can be enabled on VMs
------------------------------------------
@@ -4798,7 +4968,7 @@ and injected exceptions.
* For the new DR6 bits, note that bit 16 is set iff the #DB exception
will clear DR6.RTM.
-7.18 KVM_CAP_MANUAL_DIRTY_LOG_PROTECT
+7.18 KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2
Architectures: x86, arm, arm64, mips
Parameters: args[0] whether feature should be enabled or not
@@ -4821,6 +4991,11 @@ while userspace can see false reports of dirty pages. Manual reprotection
helps reducing this time, improving guest performance and reducing the
number of dirty log false positives.
+KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 was previously available under the name
+KVM_CAP_MANUAL_DIRTY_LOG_PROTECT, but the implementation had bugs that make
+it hard or impossible to use it correctly. The availability of
+KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 signals that those bugs are fixed.
+Userspace should not try to use KVM_CAP_MANUAL_DIRTY_LOG_PROTECT.
8. Other capabilities.
----------------------
diff --git a/Documentation/virtual/kvm/devices/vm.txt b/Documentation/virtual/kvm/devices/vm.txt
index 95ca68d663a4..4ffb82b02468 100644
--- a/Documentation/virtual/kvm/devices/vm.txt
+++ b/Documentation/virtual/kvm/devices/vm.txt
@@ -141,7 +141,8 @@ struct kvm_s390_vm_cpu_subfunc {
u8 pcc[16]; # valid with Message-Security-Assist-Extension 4
u8 ppno[16]; # valid with Message-Security-Assist-Extension 5
u8 kma[16]; # valid with Message-Security-Assist-Extension 8
- u8 reserved[1808]; # reserved for future instructions
+ u8 kdsa[16]; # valid with Message-Security-Assist-Extension 9
+ u8 reserved[1792]; # reserved for future instructions
};
Parameters: address of a buffer to load the subfunction blocks from.
diff --git a/Documentation/virtual/kvm/devices/xive.txt b/Documentation/virtual/kvm/devices/xive.txt
new file mode 100644
index 000000000000..9a24a4525253
--- /dev/null
+++ b/Documentation/virtual/kvm/devices/xive.txt
@@ -0,0 +1,197 @@
+POWER9 eXternal Interrupt Virtualization Engine (XIVE Gen1)
+==========================================================
+
+Device types supported:
+ KVM_DEV_TYPE_XIVE POWER9 XIVE Interrupt Controller generation 1
+
+This device acts as a VM interrupt controller. It provides the KVM
+interface to configure the interrupt sources of a VM in the underlying
+POWER9 XIVE interrupt controller.
+
+Only one XIVE instance may be instantiated. A guest XIVE device
+requires a POWER9 host and the guest OS should have support for the
+XIVE native exploitation interrupt mode. If not, it should run using
+the legacy interrupt mode, referred as XICS (POWER7/8).
+
+* Device Mappings
+
+ The KVM device exposes different MMIO ranges of the XIVE HW which
+ are required for interrupt management. These are exposed to the
+ guest in VMAs populated with a custom VM fault handler.
+
+ 1. Thread Interrupt Management Area (TIMA)
+
+ Each thread has an associated Thread Interrupt Management context
+ composed of a set of registers. These registers let the thread
+ handle priority management and interrupt acknowledgment. The most
+ important are :
+
+ - Interrupt Pending Buffer (IPB)
+ - Current Processor Priority (CPPR)
+ - Notification Source Register (NSR)
+
+ They are exposed to software in four different pages each proposing
+ a view with a different privilege. The first page is for the
+ physical thread context and the second for the hypervisor. Only the
+ third (operating system) and the fourth (user level) are exposed the
+ guest.
+
+ 2. Event State Buffer (ESB)
+
+ Each source is associated with an Event State Buffer (ESB) with
+ either a pair of even/odd pair of pages which provides commands to
+ manage the source: to trigger, to EOI, to turn off the source for
+ instance.
+
+ 3. Device pass-through
+
+ When a device is passed-through into the guest, the source
+ interrupts are from a different HW controller (PHB4) and the ESB
+ pages exposed to the guest should accommadate this change.
+
+ The passthru_irq helpers, kvmppc_xive_set_mapped() and
+ kvmppc_xive_clr_mapped() are called when the device HW irqs are
+ mapped into or unmapped from the guest IRQ number space. The KVM
+ device extends these helpers to clear the ESB pages of the guest IRQ
+ number being mapped and then lets the VM fault handler repopulate.
+ The handler will insert the ESB page corresponding to the HW
+ interrupt of the device being passed-through or the initial IPI ESB
+ page if the device has being removed.
+
+ The ESB remapping is fully transparent to the guest and the OS
+ device driver. All handling is done within VFIO and the above
+ helpers in KVM-PPC.
+
+* Groups:
+
+ 1. KVM_DEV_XIVE_GRP_CTRL
+ Provides global controls on the device
+ Attributes:
+ 1.1 KVM_DEV_XIVE_RESET (write only)
+ Resets the interrupt controller configuration for sources and event
+ queues. To be used by kexec and kdump.
+ Errors: none
+
+ 1.2 KVM_DEV_XIVE_EQ_SYNC (write only)
+ Sync all the sources and queues and mark the EQ pages dirty. This
+ to make sure that a consistent memory state is captured when
+ migrating the VM.
+ Errors: none
+
+ 2. KVM_DEV_XIVE_GRP_SOURCE (write only)
+ Initializes a new source in the XIVE device and mask it.
+ Attributes:
+ Interrupt source number (64-bit)
+ The kvm_device_attr.addr points to a __u64 value:
+ bits: | 63 .... 2 | 1 | 0
+ values: | unused | level | type
+ - type: 0:MSI 1:LSI
+ - level: assertion level in case of an LSI.
+ Errors:
+ -E2BIG: Interrupt source number is out of range
+ -ENOMEM: Could not create a new source block
+ -EFAULT: Invalid user pointer for attr->addr.
+ -ENXIO: Could not allocate underlying HW interrupt
+
+ 3. KVM_DEV_XIVE_GRP_SOURCE_CONFIG (write only)
+ Configures source targeting
+ Attributes:
+ Interrupt source number (64-bit)
+ The kvm_device_attr.addr points to a __u64 value:
+ bits: | 63 .... 33 | 32 | 31 .. 3 | 2 .. 0
+ values: | eisn | mask | server | priority
+ - priority: 0-7 interrupt priority level
+ - server: CPU number chosen to handle the interrupt
+ - mask: mask flag (unused)
+ - eisn: Effective Interrupt Source Number
+ Errors:
+ -ENOENT: Unknown source number
+ -EINVAL: Not initialized source number
+ -EINVAL: Invalid priority
+ -EINVAL: Invalid CPU number.
+ -EFAULT: Invalid user pointer for attr->addr.
+ -ENXIO: CPU event queues not configured or configuration of the
+ underlying HW interrupt failed
+ -EBUSY: No CPU available to serve interrupt
+
+ 4. KVM_DEV_XIVE_GRP_EQ_CONFIG (read-write)
+ Configures an event queue of a CPU
+ Attributes:
+ EQ descriptor identifier (64-bit)
+ The EQ descriptor identifier is a tuple (server, priority) :
+ bits: | 63 .... 32 | 31 .. 3 | 2 .. 0
+ values: | unused | server | priority
+ The kvm_device_attr.addr points to :
+ struct kvm_ppc_xive_eq {
+ __u32 flags;
+ __u32 qshift;
+ __u64 qaddr;
+ __u32 qtoggle;
+ __u32 qindex;
+ __u8 pad[40];
+ };
+ - flags: queue flags
+ KVM_XIVE_EQ_ALWAYS_NOTIFY (required)
+ forces notification without using the coalescing mechanism
+ provided by the XIVE END ESBs.
+ - qshift: queue size (power of 2)
+ - qaddr: real address of queue
+ - qtoggle: current queue toggle bit
+ - qindex: current queue index
+ - pad: reserved for future use
+ Errors:
+ -ENOENT: Invalid CPU number
+ -EINVAL: Invalid priority
+ -EINVAL: Invalid flags
+ -EINVAL: Invalid queue size
+ -EINVAL: Invalid queue address
+ -EFAULT: Invalid user pointer for attr->addr.
+ -EIO: Configuration of the underlying HW failed
+
+ 5. KVM_DEV_XIVE_GRP_SOURCE_SYNC (write only)
+ Synchronize the source to flush event notifications
+ Attributes:
+ Interrupt source number (64-bit)
+ Errors:
+ -ENOENT: Unknown source number
+ -EINVAL: Not initialized source number
+
+* VCPU state
+
+ The XIVE IC maintains VP interrupt state in an internal structure
+ called the NVT. When a VP is not dispatched on a HW processor
+ thread, this structure can be updated by HW if the VP is the target
+ of an event notification.
+
+ It is important for migration to capture the cached IPB from the NVT
+ as it synthesizes the priorities of the pending interrupts. We
+ capture a bit more to report debug information.
+
+ KVM_REG_PPC_VP_STATE (2 * 64bits)
+ bits: | 63 .... 32 | 31 .... 0 |
+ values: | TIMA word0 | TIMA word1 |
+ bits: | 127 .......... 64 |
+ values: | unused |
+
+* Migration:
+
+ Saving the state of a VM using the XIVE native exploitation mode
+ should follow a specific sequence. When the VM is stopped :
+
+ 1. Mask all sources (PQ=01) to stop the flow of events.
+
+ 2. Sync the XIVE device with the KVM control KVM_DEV_XIVE_EQ_SYNC to
+ flush any in-flight event notification and to stabilize the EQs. At
+ this stage, the EQ pages are marked dirty to make sure they are
+ transferred in the migration sequence.
+
+ 3. Capture the state of the source targeting, the EQs configuration
+ and the state of thread interrupt context registers.
+
+ Restore is similar :
+
+ 1. Restore the EQ configuration. As targeting depends on it.
+ 2. Restore targeting
+ 3. Restore the thread interrupt contexts
+ 4. Restore the source states
+ 5. Let the vCPU run