Merge tag 'thermal-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull thermal control updates from Rafael Wysocki:
 "These add some new hardware support (notably, the Lunar Lake platform
  support in int340x and X1E80100 temperature sensor), continue to
  rework the thermal driver interface to eliminate trip point IDs from
  it, update DT bindings for a number of platforms and simplify probe in
  a number of thermal drivers, address issues and clean up code.

  Specifics:

   - Add DLVR and MSI interrupt support for the Lunar Lake platform to
     the int340x thermal driver (Srinivas Pandruvada)

   - Enable workload type hints (WLT) support and power floor interrupt
     support for the Lunar Lake platform in int340x ((Srinivas
     Pandruvada)

   - Switch Intel thermal drivers to new Intel CPU model defines (Tony
     Luck)

   - Clean up the int3400 and int3403 drivers (Erick Archer and David
     Alan Gilbert)

   - Improve intel_pch_thermal kernel log messages printed during
     suspend to idle (Zhang Rui)

   - Make the intel_tcc_cooling driver use a model-specific bitmask for
     TCC offset (Ricardo Neri)

   - Redesign the .set_trip_temp() thermal zone callback to take a trip
     pointer instead of a trip ID and update its users (Rafael Wysocki)

   - Avoid using invalid combinations of polling_delay and passive_delay
     thermal zone parameters (Rafael Wysocki)

   - Update a cooling device registration function to take a const
     argument (Krzysztof Kozlowski)

   - Make the uniphier thermal driver use thermal_zone_for_each_trip()
     for walking trip points (Rafael Wysocki)

   - Fix and clean up several minor shortcomings in thermal debug
     (Rafael Wysocki)

   - Rename __thermal_zone_set_trips() to thermal_zone_set_trips() and
     make it use trip thresholds (Rafael Wysocki)

   - Use READ_ONCE() for lockless access to trip temperature and
     hysteresis (Rafael Wysocki)

   - Drop unnecessary cooling device target state checks from the
     Bang-Bang thermal governor (Rafael Wysocki)

   - Avoid invoking thermal governor .trip_crossed() callback for
     critical and hot trip points (Rafael Wysocki)

   - Group all Renesas drivers inside a dedicated sub directory and add
     the missing dependency to OF (Niklas Söderlund)

   - Add suspend/resume support on k3_j72xx_bandgap and take the
     opportunity to remove an unneeded delay in the init time code path
     (Théo Lebrun)

   - Fix thermal zone definition for MT8186 and MT8188 (Julien Panis)

   - Convert hisilicon-thermal.txt to dt-schema (Abdulrasaq Lawani)

   - Add DT bindings for the X1E80100 temperature sensor (Abel Vesa)

   - Fix the thermal zone node name regular expression in the DT schema
     (Krzysztof Kozlowski)

   - Avoid failing thermal control initialization by using default
     values on some platforms where calibration data is missing (Chen-Yu
     Tsai)

   - Fix the sensor cell size in DT for the Exynos platform (Krzysztof
     Kozlowski)

   - Bring the common definition of '#thermal-sensor-cells' property in
     order to simplify the bindings on all the platforms where this
     change makes sense and do some minor cleanups (Krzysztof Kozlowski)

   - Fix a race between removal and clock disable in the broadcom
     thermal driver (Krzysztof Kozlowski)

   - Drop 'trips' DT node as required from the thermal zone bindings in
     order to fix the remaining warnings appearing for thermal zones
     without trip points (Rob Herring)

   - Simplify all the drivers where dev_err_probe() can apply (Krzysztof
     Kozlowski)

   - Clean up code related to stih416 as this platform is not described
     anywhere (Raphael Gallais-Pou)"

* tag 'thermal-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (81 commits)
  thermal/drivers/sti: Cleanup code related to stih416
  thermal/drivers/generic-adc: Simplify with dev_err_probe()
  thermal/drivers/generic-adc: Simplify probe() with local dev variable
  thermal/drivers/qcom-tsens: Simplify with dev_err_probe()
  thermal/drivers/qcom-spmi-adc-tm5: Simplify with dev_err_probe()
  thermal/drivers/imx: Simplify with dev_err_probe()
  thermal/drivers/imx: Simplify probe() with local dev variable
  thermal/drivers/hisi: Simplify with dev_err_probe()
  thermal/drivers/exynos: Simplify with dev_err_probe()
  thermal/drivers/exynos: Simplify probe() with local dev variable
  thermal/drivers/broadcom: Simplify with dev_err_probe()
  thermal/drivers/broadcom: Simplify probe() with local dev variable
  thermal/drivers/broadcom: Fix race between removal and clock disable
  dt-bindings: thermal: Drop 'trips' node as required
  dt-bindings: thermal: qoriq: reference thermal-sensor schema
  dt-bindings: thermal: cleanup examples indentation
  dt-bindings: thermal: simplify few bindings
  dt-bindings: thermal: ti,j72xx: reference thermal-sensor schema
  dt-bindings: thermal: ti,am654: reference thermal-sensor schema
  dt-bindings: thermal: st,stm32: reference thermal-sensor schema
  ...

31 files changed, 298 insertions, 286 deletions

diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
index 6b3aea6d73b0..dad8de900495 100644
--- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
+++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
@@ -10,6 +10,8 @@ maintainers:
   - Vasily Khoruzhick <anarsoul@gmail.com>
   - Yangtao Li <tiny.windzz@gmail.com>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     enum:
@@ -55,7 +57,6 @@ properties:
     maxItems: 1
     description: phandle to device controlling temperate offset SYS_CFG register
 
-  # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details
   "#thermal-sensor-cells":
     enum:
       - 0
@@ -135,9 +136,8 @@ required:
   - compatible
   - reg
   - interrupts
-  - '#thermal-sensor-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
index 01fccdfc4178..725303e1a364 100644
--- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
@@ -11,6 +11,8 @@ maintainers:
 
 description: Binding for Amlogic Thermal
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -44,17 +46,17 @@ required:
   - clocks
   - amlogic,ao-secure
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-        cpu_temp: temperature-sensor@ff634800 {
-                compatible = "amlogic,g12a-cpu-thermal",
-                             "amlogic,g12a-thermal";
-                reg = <0xff634800 0x50>;
-                interrupts = <0x0 0x24 0x0>;
-                clocks = <&clk 164>;
-                #thermal-sensor-cells = <0>;
-                amlogic,ao-secure = <&sec_AO>;
-        };
+    temperature-sensor@ff634800 {
+        compatible = "amlogic,g12a-cpu-thermal",
+                     "amlogic,g12a-thermal";
+        reg = <0xff634800 0x50>;
+        interrupts = <0x0 0x24 0x0>;
+        clocks = <&clk 164>;
+        #thermal-sensor-cells = <0>;
+        amlogic,ao-secure = <&sec_AO>;
+    };
 ...
diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
index 89a2c32c0ab2..29a9844e8b48 100644
--- a/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/brcm,avs-ro-thermal.yaml
@@ -19,30 +19,30 @@ description: |+
   Refer to the bindings described in
   Documentation/devicetree/bindings/mfd/syscon.yaml
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     const: brcm,bcm2711-thermal
 
-  # See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for details
   "#thermal-sensor-cells":
     const: 0
 
 required:
   - compatible
-  - '#thermal-sensor-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-        avs-monitor@7d5d2000 {
-                compatible = "brcm,bcm2711-avs-monitor",
-                             "syscon", "simple-mfd";
-                reg = <0x7d5d2000 0xf00>;
-
-                thermal: thermal {
-                        compatible = "brcm,bcm2711-thermal";
-                        #thermal-sensor-cells = <0>;
-                };
+    avs-monitor@7d5d2000 {
+        compatible = "brcm,bcm2711-avs-monitor",
+                     "syscon", "simple-mfd";
+        reg = <0x7d5d2000 0xf00>;
+
+        thermal: thermal {
+            compatible = "brcm,bcm2711-thermal";
+            #thermal-sensor-cells = <0>;
         };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml
index 267a0f423504..081486b44382 100644
--- a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml
+++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.yaml
@@ -42,15 +42,14 @@ additionalProperties: false
 required:
   - compatible
   - reg
-  - "#thermal-sensor-cells"
 
 examples:
   - |
-     thermal@f04d1500 {
-          compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon";
-          reg = <0xf04d1500 0x28>;
-          interrupts = <0x6>;
-          interrupt-names = "tmon";
-          interrupt-parent = <&avs_host_l2_intc>;
-          #thermal-sensor-cells = <0>;
-     };
+    thermal@f04d1500 {
+        compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon";
+        reg = <0xf04d1500 0x28>;
+        interrupts = <0x6>;
+        interrupt-names = "tmon";
+        interrupt-parent = <&avs_host_l2_intc>;
+        #thermal-sensor-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml
index 2b6026d9fbcf..ddf0f20e5285 100644
--- a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml
@@ -34,7 +34,6 @@ required:
   - compatible
   - reg
   - clocks
-  - '#thermal-sensor-cells'
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml b/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml
index e02d04d4f71e..ceef318668bf 100644
--- a/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/fsl,scu-thermal.yaml
@@ -28,7 +28,6 @@ properties:
 
 required:
   - compatible
-  - '#thermal-sensor-cells'
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/thermal/generic-adc-thermal.yaml b/Documentation/devicetree/bindings/thermal/generic-adc-thermal.yaml
index f1fc3b0d8608..12e6418dc24d 100644
--- a/Documentation/devicetree/bindings/thermal/generic-adc-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/generic-adc-thermal.yaml
@@ -15,6 +15,8 @@ description:
   sensor resistor. The voltage read across the sensor is mapped to
   temperature using voltage-temperature lookup table.
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     const: generic-adc-thermal
@@ -44,11 +46,10 @@ properties:
 
 required:
   - compatible
-  - '#thermal-sensor-cells'
   - io-channels
   - io-channel-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/thermal/hisilicon,tsensor.yaml b/Documentation/devicetree/bindings/thermal/hisilicon,tsensor.yaml
new file mode 100644
index 000000000000..11aca2b749d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/hisilicon,tsensor.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/hisilicon,tsensor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Temperature Sensor on HiSilicon SoCs
+
+maintainers:
+  - Abdulrasaq Lawani <abdulrasaqolawani@gmail.com>
+
+allOf:
+  - $ref: thermal-sensor.yaml
+
+properties:
+  compatible:
+    enum:
+      - hisilicon,tsensor
+      - hisilicon,hi3660-tsensor
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: thermal_clk
+
+  interrupts:
+    maxItems: 1
+
+  '#thermal-sensor-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#thermal-sensor-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/hi6220-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    temperature-sensor@f7030700 {
+        compatible = "hisilicon,tsensor";
+        reg = <0xf7030700 0x1000>;
+        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&sys_ctrl HI6220_TSENSOR_CLK>;
+        clock-names = "thermal_clk";
+        #thermal-sensor-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt
deleted file mode 100644
index 4b19d80e6558..000000000000
--- a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt
+++ /dev/null
@@ -1,32 +0,0 @@
-* Temperature Sensor on hisilicon SoCs
-
-** Required properties :
-
-- compatible: "hisilicon,tsensor".
-- reg: physical base address of thermal sensor and length of memory mapped
-  region.
-- interrupt: The interrupt number to the cpu. Defines the interrupt used
-  by /SOCTHERM/tsensor.
-- clock-names: Input clock name, should be 'thermal_clk'.
-- clocks: phandles for clock specified in "clock-names" property.
-- #thermal-sensor-cells: Should be 1. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
-
-Example :
-
-for Hi6220:
-	tsensor: tsensor@0,f7030700 {
-		compatible = "hisilicon,tsensor";
-		reg = <0x0 0xf7030700 0x0 0x1000>;
-		interrupts = <0 7 0x4>;
-		clocks = <&sys_ctrl HI6220_TSENSOR_CLK>;
-		clock-names = "thermal_clk";
-		#thermal-sensor-cells = <1>;
-	}
-
-for Hi3660:
-	tsensor: tsensor@fff30000 {
-		compatible = "hisilicon,hi3660-tsensor";
-		reg = <0x0 0xfff30000 0x0 0x1000>;
-		interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
-		#thermal-sensor-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml
index d2c1e4573c32..e7ddaa6c966e 100644
--- a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml
@@ -16,6 +16,8 @@ description: |
   for i.MX8MM which has ONLY 1 sensor, v2 is for i.MX8MP which has
   2 sensors.
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     oneOf:
@@ -51,9 +53,8 @@ required:
   - compatible
   - reg
   - clocks
-  - '#thermal-sensor-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
index ca81c8afba79..79e691b08341 100644
--- a/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/loongson,ls2k-thermal.yaml
@@ -38,7 +38,6 @@ required:
   - compatible
   - reg
   - interrupts
-  - '#thermal-sensor-cells'
 
 if:
   properties:
diff --git a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
index 331cf4e662e3..0259cd3ce9c5 100644
--- a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
@@ -99,7 +99,6 @@ required:
   - resets
   - nvmem-cells
   - nvmem-cell-names
-  - "#thermal-sensor-cells"
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml
index b0237d236021..19bb1f324183 100644
--- a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml
+++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.yaml
@@ -197,7 +197,6 @@ required:
   - clock-names
   - resets
   - reset-names
-  - "#thermal-sensor-cells"
 
 allOf:
   - $ref: thermal-sensor.yaml
diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml
index c91fd07e4061..978b9e6ab8a3 100644
--- a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.yaml
@@ -20,11 +20,7 @@ description: |
   node. See ../firmware/nvidia,tegra186-bpmp.yaml for details of the
   BPMP binding.
 
-  This node represents a thermal sensor. See
-
-    Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
-
-  for details of the core thermal binding.
+$ref: thermal-sensor.yaml#
 
 properties:
   compatible:
@@ -33,10 +29,6 @@ properties:
       - nvidia,tegra194-bpmp-thermal
 
   '#thermal-sensor-cells':
-    $ref: /schemas/types.yaml#/definitions/uint32
-    description: Number of cells needed in the phandle specifier to
-      identify a given sensor. Must be 1 and the single cell specifies
-      the sensor index.
     const: 1
 
-additionalProperties: false
+unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml b/Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml
index a35da257b070..63a29a1f7fe6 100644
--- a/Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml
+++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra30-tsensor.yaml
@@ -27,6 +27,8 @@ description: |
 
   TSENSOR has two channels which monitor two different spots of the SoC.
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     const: nvidia,tegra30-tsensor
@@ -46,19 +48,14 @@ properties:
   "#thermal-sensor-cells":
     const: 1
 
-  assigned-clock-parents: true
-  assigned-clock-rates: true
-  assigned-clocks: true
-
 required:
   - compatible
   - reg
   - clocks
   - resets
   - interrupts
-  - "#thermal-sensor-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml b/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml
index 5f08b6e59b8a..30b22151aa82 100644
--- a/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml
@@ -42,7 +42,6 @@ required:
   - compatible
   - reg
   - interrupts
-  - '#thermal-sensor-cells'
 
 additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml
index 7541e27704ca..bfad8130a042 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml
@@ -8,6 +8,8 @@ title: Qualcomm's SPMI PMIC ADC HC Thermal Monitoring
 maintainers:
   - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     const: qcom,spmi-adc-tm-hc
@@ -20,9 +22,6 @@ properties:
 
   "#thermal-sensor-cells":
     const: 1
-    description:
-      Number of cells required to uniquely identify the thermal sensors. Since
-      we have multiple sensors this is set to 1
 
   "#address-cells":
     const: 1
@@ -106,9 +105,8 @@ required:
   - interrupts
   - "#address-cells"
   - "#size-cells"
-  - "#thermal-sensor-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
index d9d2657287cb..4470a5942fb2 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
@@ -8,6 +8,8 @@ title: Qualcomm's SPMI PMIC ADC Thermal Monitoring
 maintainers:
   - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     enum:
@@ -23,9 +25,6 @@ properties:
 
   "#thermal-sensor-cells":
     const: 1
-    description:
-      Number of cells required to uniquely identify the thermal sensors. Since
-      we have multiple sensors this is set to 1
 
   "#address-cells":
     const: 1
@@ -159,9 +158,8 @@ required:
   - interrupts
   - "#address-cells"
   - "#size-cells"
-  - "#thermal-sensor-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 99d9c526c0b6..72048c5a0412 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -67,6 +67,7 @@ properties:
               - qcom,sm8450-tsens
               - qcom,sm8550-tsens
               - qcom,sm8650-tsens
+              - qcom,x1e80100-tsens
           - const: qcom,tsens-v2
 
       - description: v2 of TSENS with combined interrupt
@@ -217,18 +218,16 @@ properties:
 
   "#thermal-sensor-cells":
     const: 1
-    description:
-      Number of cells required to uniquely identify the thermal sensors. Since
-      we have multiple sensors this is set to 1
 
 required:
   - compatible
   - interrupts
   - interrupt-names
-  - "#thermal-sensor-cells"
   - "#qcom,sensors"
 
 allOf:
+  - $ref: thermal-sensor.yaml#
+
   - if:
       properties:
         compatible:
@@ -292,27 +291,21 @@ allOf:
       required:
         - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    // Example msm9860 based SoC (ipq8064):
-    gcc: clock-controller {
-
-           /* ... */
+    thermal-sensor {
+        compatible = "qcom,ipq8064-tsens";
 
-           tsens: thermal-sensor {
-                compatible = "qcom,ipq8064-tsens";
-
-                 nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
-                 nvmem-cell-names = "calib", "calib_backup";
-                 interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-                 interrupt-names = "uplow";
+        nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>;
+        nvmem-cell-names = "calib", "calib_backup";
+        interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uplow";
 
-                 #qcom,sensors = <11>;
-                 #thermal-sensor-cells = <1>;
-          };
+        #qcom,sensors = <11>;
+        #thermal-sensor-cells = <1>;
     };
 
   - |
@@ -349,66 +342,66 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     // Example 1 (legacy: for pre v1 IP):
     tsens1: thermal-sensor@4a9000 {
-           compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
-           reg = <0x4a9000 0x1000>, /* TM */
-                 <0x4a8000 0x1000>; /* SROT */
+        compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
+        reg = <0x4a9000 0x1000>, /* TM */
+              <0x4a8000 0x1000>; /* SROT */
 
-           nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
-           nvmem-cell-names = "calib", "calib_sel";
+        nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
+        nvmem-cell-names = "calib", "calib_sel";
 
-           interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-           interrupt-names = "uplow";
+        interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uplow";
 
-           #qcom,sensors = <5>;
-           #thermal-sensor-cells = <1>;
+        #qcom,sensors = <5>;
+        #thermal-sensor-cells = <1>;
     };
 
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     // Example 2 (for any platform containing v1 of the TSENS IP):
     tsens2: thermal-sensor@4a9000 {
-          compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
-          reg = <0x004a9000 0x1000>, /* TM */
-                <0x004a8000 0x1000>; /* SROT */
+        compatible = "qcom,qcs404-tsens", "qcom,tsens-v1";
+        reg = <0x004a9000 0x1000>, /* TM */
+              <0x004a8000 0x1000>; /* SROT */
 
-          nvmem-cells = <&tsens_caldata>;
-          nvmem-cell-names = "calib";
+        nvmem-cells = <&tsens_caldata>;
+        nvmem-cell-names = "calib";
 
-          interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
-          interrupt-names = "uplow";
+        interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uplow";
 
-          #qcom,sensors = <10>;
-          #thermal-sensor-cells = <1>;
+        #qcom,sensors = <10>;
+        #thermal-sensor-cells = <1>;
     };
 
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     // Example 3 (for any platform containing v2 of the TSENS IP):
     tsens3: thermal-sensor@c263000 {
-           compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
-           reg = <0xc263000 0x1ff>,
-                 <0xc222000 0x1ff>;
+        compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+        reg = <0xc263000 0x1ff>,
+              <0xc222000 0x1ff>;
 
-           interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
-                        <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
-           interrupt-names = "uplow", "critical";
+        interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "uplow", "critical";
 
-           #qcom,sensors = <13>;
-           #thermal-sensor-cells = <1>;
+        #qcom,sensors = <13>;
+        #thermal-sensor-cells = <1>;
     };
 
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     // Example 4 (for any IPQ8074 based SoC-s):
     tsens4: thermal-sensor@4a9000 {
-           compatible = "qcom,ipq8074-tsens";
-           reg = <0x4a9000 0x1000>,
-                 <0x4a8000 0x1000>;
+        compatible = "qcom,ipq8074-tsens";
+        reg = <0x4a9000 0x1000>,
+              <0x4a8000 0x1000>;
 
-           interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
-           interrupt-names = "combined";
+        interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "combined";
 
-           #qcom,sensors = <16>;
-           #thermal-sensor-cells = <1>;
+        #qcom,sensors = <16>;
+        #thermal-sensor-cells = <1>;
     };
 ...
diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
index d155d6799da6..1876fe9555d6 100644
--- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
@@ -9,6 +9,8 @@ title: Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs
 maintainers:
   - Anson Huang <Anson.Huang@nxp.com>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     description: |
@@ -68,9 +70,8 @@ required:
   - interrupts
   - fsl,tmu-range
   - fsl,tmu-calibration
-  - '#thermal-sensor-cells'
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
index 6a81cb6e11bc..b6657d64cf3d 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
@@ -15,6 +15,8 @@ description:
 maintainers:
   - Niklas Söderlund <niklas.soderlund@ragnatech.se>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     enum:
@@ -57,7 +59,6 @@ required:
   - clocks
   - power-domains
   - resets
-  - "#thermal-sensor-cells"
 
 if:
   properties:
@@ -96,7 +97,7 @@ else:
     required:
       - interrupts
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -105,33 +106,33 @@ examples:
     #include <dt-bindings/power/r8a7795-sysc.h>
 
     tsc: thermal@e6198000 {
-            compatible = "renesas,r8a7795-thermal";
-            reg = <0xe6198000 0x100>,
-                  <0xe61a0000 0x100>,
-                  <0xe61a8000 0x100>;
-            interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-                         <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 522>;
-            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
-            resets = <&cpg 522>;
-            #thermal-sensor-cells = <1>;
+        compatible = "renesas,r8a7795-thermal";
+        reg = <0xe6198000 0x100>,
+              <0xe61a0000 0x100>,
+              <0xe61a8000 0x100>;
+        interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 522>;
+        power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+        resets = <&cpg 522>;
+        #thermal-sensor-cells = <1>;
     };
 
     thermal-zones {
-            sensor_thermal: sensor-thermal {
-                    polling-delay-passive = <250>;
-                    polling-delay = <1000>;
-                    thermal-sensors = <&tsc 0>;
-
-                    trips {
-                            sensor1_crit: sensor1-crit {
-                                    temperature = <90000>;
-                                    hysteresis = <2000>;
-                                    type = "critical";
-                            };
-                    };
+        sensor_thermal: sensor-thermal {
+            polling-delay-passive = <250>;
+            polling-delay = <1000>;
+            thermal-sensors = <&tsc 0>;
+
+            trips {
+                sensor1_crit: sensor1-crit {
+                    temperature = <90000>;
+                    hysteresis = <2000>;
+                    type = "critical";
+                };
             };
+        };
     };
   - |
     #include <dt-bindings/clock/r8a779a0-cpg-mssr.h>
@@ -139,14 +140,14 @@ examples:
     #include <dt-bindings/power/r8a779a0-sysc.h>
 
     tsc_r8a779a0: thermal@e6190000 {
-            compatible = "renesas,r8a779a0-thermal";
-            reg = <0xe6190000 0x200>,
-                  <0xe6198000 0x200>,
-                  <0xe61a0000 0x200>,
-                  <0xe61a8000 0x200>,
-                  <0xe61b0000 0x200>;
-            clocks = <&cpg CPG_MOD 919>;
-            power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
-            resets = <&cpg 919>;
-            #thermal-sensor-cells = <1>;
+        compatible = "renesas,r8a779a0-thermal";
+        reg = <0xe6190000 0x200>,
+              <0xe6198000 0x200>,
+              <0xe61a0000 0x200>,
+              <0xe61a8000 0x200>,
+              <0xe61b0000 0x200>;
+        clocks = <&cpg CPG_MOD 919>;
+        power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+        resets = <&cpg 919>;
+        #thermal-sensor-cells = <1>;
     };
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
index 119998d10ff4..221a58d18cad 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml
@@ -98,8 +98,8 @@ examples:
   # Example (non interrupt support)
   - |
     thermal@ffc48000 {
-            compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
-            reg = <0xffc48000 0x38>;
+        compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal";
+        reg = <0xffc48000 0x38>;
     };
 
   # Example (interrupt support)
@@ -109,12 +109,12 @@ examples:
     #include <dt-bindings/interrupt-controller/irq.h>
 
     thermal@e61f0000 {
-            compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
-            reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>,
-                  <0xe61f0200 0x38>, <0xe61f0300 0x38>;
-            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>;
-            power-domains = <&pd_c5>;
+        compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
+        reg = <0xe61f0000 0x14>, <0xe61f0100 0x38>,
+              <0xe61f0200 0x38>, <0xe61f0300 0x38>;
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&mstp5_clks R8A73A4_CLK_THERMAL>;
+        power-domains = <&pd_c5>;
     };
 
   # Example (with thermal-zone)
@@ -124,32 +124,32 @@ examples:
     #include <dt-bindings/power/r8a7790-sysc.h>
 
     thermal: thermal@e61f0000 {
-      compatible = "renesas,thermal-r8a7790",
-                   "renesas,rcar-gen2-thermal",
-                   "renesas,rcar-thermal";
-            reg = <0xe61f0000 0x10>, <0xe61f0100 0x38>;
-            interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&cpg CPG_MOD 522>;
-            power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
-            resets = <&cpg 522>;
-            #thermal-sensor-cells = <0>;
+        compatible = "renesas,thermal-r8a7790",
+                     "renesas,rcar-gen2-thermal",
+                     "renesas,rcar-thermal";
+        reg = <0xe61f0000 0x10>, <0xe61f0100 0x38>;
+        interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&cpg CPG_MOD 522>;
+        power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+        resets = <&cpg 522>;
+        #thermal-sensor-cells = <0>;
     };
 
     thermal-zones {
-            cpu_thermal: cpu-thermal {
-                    polling-delay-passive = <1000>;
-                    polling-delay = <5000>;
-
-                    thermal-sensors = <&thermal>;
-
-                    trips {
-                            cpu-crit {
-                                    temperature = <115000>;
-                                    hysteresis = <0>;
-                                    type = "critical";
-                            };
-                    };
-                    cooling-maps {
-                    };
+        cpu_thermal: cpu-thermal {
+            polling-delay-passive = <1000>;
+            polling-delay = <5000>;
+
+            thermal-sensors = <&thermal>;
+
+            trips {
+                cpu-crit {
+                    temperature = <115000>;
+                    hysteresis = <0>;
+                    type = "critical";
+                };
             };
+            cooling-maps {
+            };
+        };
     };
diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml b/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml
index 55f8ec0bec01..b717ea8261ca 100644
--- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.yaml
@@ -9,6 +9,8 @@ title: Temperature Sensor ADC (TSADC) on Rockchip SoCs
 maintainers:
   - Heiko Stuebner <heiko@sntech.de>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     enum:
@@ -76,9 +78,8 @@ required:
   - clocks
   - clock-names
   - resets
-  - "#thermal-sensor-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml b/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml
index 03f4b926e53c..136589f5adee 100644
--- a/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/rzg2l-thermal.yaml
@@ -13,6 +13,8 @@ description:
 maintainers:
   - Biju Das <biju.das.jz@bp.renesas.com>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     items:
@@ -43,36 +45,35 @@ required:
   - clocks
   - power-domains
   - resets
-  - "#thermal-sensor-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
     #include <dt-bindings/clock/r9a07g044-cpg.h>
 
     tsu: thermal@10059400 {
-            compatible = "renesas,r9a07g044-tsu",
-                         "renesas,rzg2l-tsu";
-            reg = <0x10059400 0x400>;
-            clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>;
-            resets = <&cpg R9A07G044_TSU_PRESETN>;
-            power-domains = <&cpg>;
-            #thermal-sensor-cells = <1>;
+        compatible = "renesas,r9a07g044-tsu",
+                     "renesas,rzg2l-tsu";
+        reg = <0x10059400 0x400>;
+        clocks = <&cpg CPG_MOD R9A07G044_TSU_PCLK>;
+        resets = <&cpg R9A07G044_TSU_PRESETN>;
+        power-domains = <&cpg>;
+        #thermal-sensor-cells = <1>;
     };
 
     thermal-zones {
-            cpu-thermal {
-                    polling-delay-passive = <250>;
-                    polling-delay = <1000>;
-                    thermal-sensors = <&tsu 0>;
-
-                    trips {
-                            sensor_crit: sensor-crit {
-                                    temperature = <125000>;
-                                    hysteresis = <1000>;
-                                    type = "critical";
-                            };
-                    };
+        cpu-thermal {
+            polling-delay-passive = <250>;
+            polling-delay = <1000>;
+            thermal-sensors = <&tsu 0>;
+
+            trips {
+                sensor_crit: sensor-crit {
+                    temperature = <125000>;
+                    hysteresis = <1000>;
+                    type = "critical";
+                };
             };
+        };
     };
diff --git a/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml b/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml
index 1344df708e2d..29a08b0729ee 100644
--- a/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/samsung,exynos-thermal.yaml
@@ -61,7 +61,8 @@ properties:
           TRIMINFO at 0x10068000 contains data for TMU channel 2
     minItems: 1
 
-  '#thermal-sensor-cells': true
+  '#thermal-sensor-cells':
+    const: 0
 
   vtmu-supply:
     description: The regulator node supplying voltage to TMU.
diff --git a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
index 6f975821fa5e..8210b7079721 100644
--- a/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/socionext,uniphier-thermal.yaml
@@ -14,6 +14,8 @@ description: |
 maintainers:
   - Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     enum:
@@ -38,9 +40,8 @@ properties:
 required:
   - compatible
   - interrupts
-  - "#thermal-sensor-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml
index 76aaa004c8ac..afa551f6185f 100644
--- a/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/sprd-thermal.yaml
@@ -11,6 +11,8 @@ maintainers:
   - Baolin Wang <baolin.wang7@gmail.com>
   - Chunyan Zhang <zhang.lyra@gmail.com>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     const: sprd,ums512-thermal
@@ -77,35 +79,34 @@ required:
   - clock-names
   - nvmem-cells
   - nvmem-cell-names
-  - "#thermal-sensor-cells"
   - "#address-cells"
   - "#size-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
-        ap_thm0: thermal@32200000 {
-                compatible = "sprd,ums512-thermal";
-                reg = <0x32200000 0x10000>;
-                clock-names = "enable";
-                clocks = <&aonapb_gate 32>;
-                #thermal-sensor-cells = <1>;
-                nvmem-cells = <&thm0_sign>, <&thm0_ratio>;
-                nvmem-cell-names = "thm_sign_cal", "thm_ratio_cal";
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-                prometheus-sensor@0 {
-                        reg = <0>;
-                        nvmem-cells = <&thm0_sen0>;
-                        nvmem-cell-names = "sen_delta_cal";
-                };
-
-                ank-sensor@1 {
-                        reg = <1>;
-                        nvmem-cells = <&thm0_sen1>;
-                        nvmem-cell-names = "sen_delta_cal";
-                };
+    thermal@32200000 {
+        compatible = "sprd,ums512-thermal";
+        reg = <0x32200000 0x10000>;
+        clock-names = "enable";
+        clocks = <&aonapb_gate 32>;
+        #thermal-sensor-cells = <1>;
+        nvmem-cells = <&thm0_sign>, <&thm0_ratio>;
+        nvmem-cell-names = "thm_sign_cal", "thm_ratio_cal";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        prometheus-sensor@0 {
+            reg = <0>;
+            nvmem-cells = <&thm0_sen0>;
+            nvmem-cell-names = "sen_delta_cal";
+        };
+
+        ank-sensor@1 {
+            reg = <1>;
+            nvmem-cells = <&thm0_sen1>;
+            nvmem-cell-names = "sen_delta_cal";
         };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml b/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml
index ab043084f667..1c01a80a0cdd 100644
--- a/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/st,stm32-thermal.yaml
@@ -9,6 +9,8 @@ title: STMicroelectronics STM32 digital thermal sensor (DTS)
 maintainers:
   - Pascal Paillet <p.paillet@foss.st.com>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     const: st,stm32-thermal
@@ -30,14 +32,13 @@ properties:
     const: 0
 
 required:
-  - "#thermal-sensor-cells"
   - compatible
   - reg
   - interrupts
   - clocks
   - clock-names
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index 68398e7e8655..0f435be1dbd8 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -49,7 +49,10 @@ properties:
       to take when the temperature crosses those thresholds.
 
 patternProperties:
-  "^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$":
+  # Node name is limited in size due to Linux kernel requirements - 19
+  # characters in total (see THERMAL_NAME_LENGTH, including terminating NUL
+  # byte):
+  "^[a-zA-Z][a-zA-Z0-9\\-]{1,10}-thermal$":
     type: object
     description:
       Each thermal zone node contains information about how frequently it
@@ -229,7 +232,6 @@ patternProperties:
 
     required:
       - thermal-sensors
-      - trips
 
     additionalProperties: false
 
diff --git a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
index 7ed0abe9290f..c123d9070525 100644
--- a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml
@@ -9,6 +9,8 @@ title: Texas Instruments AM654 VTM (DTS)
 maintainers:
   - Keerthy <j-keerthy@ti.com>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     const: ti,am654-vtm
@@ -26,9 +28,8 @@ required:
   - compatible
   - reg
   - power-domains
-  - "#thermal-sensor-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -46,11 +47,11 @@ examples:
         thermal-sensors = <&vtm0 0>;
 
         trips {
-                mpu0_crit: mpu0_crit {
-                        temperature = <125000>; /* milliCelsius */
-                        hysteresis = <2000>; /* milliCelsius */
-                        type = "critical";
-                };
+            mpu0_crit: mpu0_crit {
+                temperature = <125000>; /* milliCelsius */
+                hysteresis = <2000>; /* milliCelsius */
+                type = "critical";
+            };
         };
     };
 ...
diff --git a/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml
index 171b3622ed84..82b77b9795a3 100644
--- a/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml
@@ -22,6 +22,8 @@ description: |
   Temp(C) = (-9.2627e-12) * x^4 + (6.0373e-08) * x^3 + \
             (-1.7058e-04) * x^2 + (3.2512e-01) * x   + (-4.9003e+01)
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     enum:
@@ -64,9 +66,8 @@ required:
   - compatible
   - reg
   - power-domains
-  - "#thermal-sensor-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |