Merge tag 'iio-fixes-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus

Jonathan writes:

1st set of IIO fixes for 6.6

Note last minute rebase to fix up a stale Fixes tag. All patches have been
in Linux-next for some time.

adi,ad3552r
 - Fix swapped device IDs for the two parts that are supported.
adi,ad7192
 - Use the right reference voltage source.
adi,ad7292
 - Fix additionalProperties to be false, not true.
adi,ad74413
 - Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER
adi,admv1013
 - Fix up some corner cases for the mixer vgate register value.
bosch,bmp280
 - Fix a null pointer dereference caused by a wrong boolean operator.
bosch,bno055
 - Add missing Kconfig depends on IIO_BUFFER and IIO_TRIGGERED_BUFFER
freescale,imx8eqxp
 - Fix some wrong register addresses.
google,cros_ec
 - Fix a use after free if very badly timed buffer disable occurs by
   holding the device in buffered mode.
infineon,dps310
 - Expand a timeout so we don't hit it on working parts.
meas,m5611
 - Allow for a ROM CRC of 0 as it is a valid value and there are devices
   out there where it happens.
murata,irsd200
 - Make sure the buffer used to build up the scan is large enough to take
   the timestamp.
rohm,bu27010 binding
 - Add a missing required vdd-supply
vishay,vcnl4000
 - Don't power down chip in wrong place.

* tag 'iio-fixes-for-6.6a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: pressure: ms5611: ms5611_prom_is_valid false negative bug
  dt-bindings: iio: adc: adi,ad7292: Fix additionalProperties on channel nodes
  iio: adc: ad7192: Correct reference voltage
  iio: light: vcnl4000: Don't power on/off chip in config
  iio: addac: Kconfig: update ad74413r selections
  iio: pressure: dps310: Adjust Timeout Settings
  iio: imu: bno055: Fix missing Kconfig dependencies
  iio: adc: imx8qxp: Fix address for command buffer registers
  iio: cros_ec: fix an use-after-free in cros_ec_sensors_push_data()
  iio: irsd200: fix -Warray-bounds bug in irsd200_trigger_handler
  dt-bindings: iio: rohm,bu27010: add missing vdd-supply to example
  iio: admv1013: add mixer_vgate corner cases
  iio: pressure: bmp280: Fix NULL pointer exception
  iio: dac: ad3552r: Correct device IDs

2 files changed, 2 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
index 7cc4ddc4e9b7..2aa1f4b063eb 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml
@@ -61,7 +61,7 @@ patternProperties:
     required:
       - reg
 
-    additionalProperties: true
+    additionalProperties: false
 
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
diff --git a/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml b/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml
index 8376d64a641a..bed42d5d0d94 100644
--- a/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml
+++ b/Documentation/devicetree/bindings/iio/light/rohm,bu27010.yaml
@@ -45,5 +45,6 @@ examples:
       light-sensor@38 {
         compatible = "rohm,bu27010";
         reg = <0x38>;
+        vdd-supply = <&vdd>;
       };
     };