Backmerge tag 'v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next

Daniel asked for this for some intel deps, so let's do it now.

Signed-off-by: Dave Airlie <airlied@redhat.com>

11 files changed, 60 insertions, 36 deletions

diff --git a/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing b/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing
index b363827da437..910df0e5815a 100644
--- a/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing
+++ b/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing
@@ -1,4 +1,4 @@
-What:		/sys/bus/platform/drivers/aspeed-uart-routing/*/uart*
+What:		/sys/bus/platform/drivers/aspeed-uart-routing/\*/uart\*
 Date:		September 2021
 Contact:	Oskar Senft <osk@google.com>
 		Chia-Wei Wang <chiawei_wang@aspeedtech.com>
@@ -9,7 +9,7 @@ Description:	Selects the RX source of the UARTx device.
 		depends on the selected file.
 
 		e.g.
-		cat /sys/bus/platform/drivers/aspeed-uart-routing/*.uart_routing/uart1
+		cat /sys/bus/platform/drivers/aspeed-uart-routing/\*.uart_routing/uart1
 		[io1] io2 io3 io4 uart2 uart3 uart4 io6
 
 		In this case, UART1 gets its input from IO1 (physical serial port 1).
@@ -17,7 +17,7 @@ Description:	Selects the RX source of the UARTx device.
 Users:		OpenBMC.  Proposed changes should be mailed to
 		openbmc@lists.ozlabs.org
 
-What:		/sys/bus/platform/drivers/aspeed-uart-routing/*/io*
+What:		/sys/bus/platform/drivers/aspeed-uart-routing/\*/io\*
 Date:		September 2021
 Contact:	Oskar Senft <osk@google.com>
 		Chia-Wei Wang <chiawei_wang@aspeedtech.com>
diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
index 0ec7b7f1524b..ea281dd75517 100644
--- a/Documentation/arm64/silicon-errata.rst
+++ b/Documentation/arm64/silicon-errata.rst
@@ -100,6 +100,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A510     | #2051678        | ARM64_ERRATUM_2051678       |
 +----------------+-----------------+-----------------+-----------------------------+
+| ARM            | Cortex-A510     | #2077057        | ARM64_ERRATUM_2077057       |
++----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2119858        | ARM64_ERRATUM_2119858       |
 +----------------+-----------------+-----------------+-----------------------------+
 | ARM            | Cortex-A710     | #2054223        | ARM64_ERRATUM_2054223       |
diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst
index dcefee707ccd..a833ecf12fbc 100644
--- a/Documentation/dev-tools/kselftest.rst
+++ b/Documentation/dev-tools/kselftest.rst
@@ -7,6 +7,14 @@ directory. These are intended to be small tests to exercise individual code
 paths in the kernel. Tests are intended to be run after building, installing
 and booting a kernel.
 
+Kselftest from mainline can be run on older stable kernels. Running tests
+from mainline offers the best coverage. Several test rings run mainline
+kselftest suite on stable releases. The reason is that when a new test
+gets added to test existing code to regression test a bug, we should be
+able to run that test on an older kernel. Hence, it is important to keep
+code that can still test an older kernel and make sure it skips the test
+gracefully on newer releases.
+
 You can find additional information on Kselftest framework, how to
 write new tests using the framework on Kselftest wiki:
 
diff --git a/Documentation/dev-tools/kunit/usage.rst b/Documentation/dev-tools/kunit/usage.rst
index 76af931a332c..1c83e7d60a8a 100644
--- a/Documentation/dev-tools/kunit/usage.rst
+++ b/Documentation/dev-tools/kunit/usage.rst
@@ -242,7 +242,7 @@ example:
 
 	int rectangle_area(struct shape *this)
 	{
-		struct rectangle *self = container_of(this, struct shape, parent);
+		struct rectangle *self = container_of(this, struct rectangle, parent);
 
 		return self->length * self->width;
 	};
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index e77635c5422c..fa8b31660cad 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -119,6 +119,9 @@ Boards (incomplete list of examples):
 - OMAP3 BeagleBoard : Low cost community board
   compatible = "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
 
+- OMAP3 BeagleBoard A to B4 : Early BeagleBoard revisions A to B4 with a timer quirk
+  compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3"
+
 - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
   compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"
 
diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
index 0dfa6b26e099..27092c6a86c4 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -35,6 +35,10 @@ description:
   contains a specific memory layout, which is documented in chapter 8 of the
   SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>.
 
+  The thead,c900-plic is different from sifive,plic-1.0.0 in opensbi, the
+  T-HEAD PLIC implementation requires setting a delegation bit to allow access
+  from S-mode. So add thead,c900-plic to distinguish them.
+
 maintainers:
   - Sagar Kadam <sagar.kadam@sifive.com>
   - Paul Walmsley  <paul.walmsley@sifive.com>
@@ -42,12 +46,17 @@ maintainers:
 
 properties:
   compatible:
-    items:
-      - enum:
-          - sifive,fu540-c000-plic
-          - starfive,jh7100-plic
-          - canaan,k210-plic
-      - const: sifive,plic-1.0.0
+    oneOf:
+      - items:
+          - enum:
+              - sifive,fu540-c000-plic
+              - starfive,jh7100-plic
+              - canaan,k210-plic
+          - const: sifive,plic-1.0.0
+      - items:
+          - enum:
+              - allwinner,sun20i-d1-plic
+          - const: thead,c900-plic
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index b86edf67ce62..58ecc62adfaa 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -107,6 +107,10 @@ properties:
           - const: imem
           - const: config
 
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to the AOSS side-channel message RAM
+
   qcom,smem-states:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description: State bits used in by the AP to signal the modem.
@@ -222,6 +226,8 @@ examples:
                                      "imem",
                                      "config";
 
+                qcom,qmp = <&aoss_qmp>;
+
                 qcom,smem-states = <&ipa_smp2p_out 0>,
                                    <&ipa_smp2p_out 1>;
                 qcom,smem-state-names = "ipa-clock-enabled-valid",
diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
index 5dd209206e88..3ec2d7b83775 100644
--- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml
@@ -23,8 +23,9 @@ properties:
     minItems: 1
     maxItems: 256
     items:
-      minimum: 0
-      maximum: 256
+      items:
+        - minimum: 0
+          maximum: 256
     description:
       Chip select used by the device.
 
diff --git a/Documentation/filesystems/netfs_library.rst b/Documentation/filesystems/netfs_library.rst
index 136f8da3d0e2..4f373a8ec47b 100644
--- a/Documentation/filesystems/netfs_library.rst
+++ b/Documentation/filesystems/netfs_library.rst
@@ -462,6 +462,10 @@ operation table looks like the following::
 			     struct iov_iter *iter,
 			     netfs_io_terminated_t term_func,
 			     void *term_func_priv);
+
+		int (*query_occupancy)(struct netfs_cache_resources *cres,
+				       loff_t start, size_t len, size_t granularity,
+				       loff_t *_data_start, size_t *_data_len);
 	};
 
 With a termination handler function pointer::
@@ -536,6 +540,18 @@ The methods defined in the table are:
    indicating whether the termination is definitely happening in the caller's
    context.
 
+ * ``query_occupancy()``
+
+   [Required] Called to find out where the next piece of data is within a
+   particular region of the cache.  The start and length of the region to be
+   queried are passed in, along with the granularity to which the answer needs
+   to be aligned.  The function passes back the start and length of the data,
+   if any, available within that region.  Note that there may be a hole at the
+   front.
+
+   It returns 0 if some data was found, -ENODATA if there was no usable data
+   within the region or -ENOBUFS if there is no caching on this file.
+
 Note that these methods are passed a pointer to the cache resource structure,
 not the read request structure as they could be used in other situations where
 there isn't a read request structure as well, such as writing dirty data to the
diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
index ee842606e883..7bf7f2111696 100644
--- a/Documentation/gpu/todo.rst
+++ b/Documentation/gpu/todo.rst
@@ -300,30 +300,6 @@ Contact: Daniel Vetter, Noralf Tronnes
 
 Level: Advanced
 
-Garbage collect fbdev scrolling acceleration
---------------------------------------------
-
-Scroll acceleration has been disabled in fbcon. Now it works as the old
-SCROLL_REDRAW mode. A ton of code was removed in fbcon.c and the hook bmove was
-removed from fbcon_ops.
-Remaining tasks:
-
-- a bunch of the hooks in fbcon_ops could be removed or simplified by calling
-  directly instead of the function table (with a switch on p->rotate)
-
-- fb_copyarea is unused after this, and can be deleted from all drivers
-
-- after that, fb_copyarea can be deleted from fb_ops in include/linux/fb.h as
-  well as cfb_copyarea
-
-Note that not all acceleration code can be deleted, since clearing and cursor
-support is still accelerated, which might be good candidates for further
-deletion projects.
-
-Contact: Daniel Vetter
-
-Level: Intermediate
-
 idr_init_base()
 ---------------
 
diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst
index 687efcf245c1..e6fce2cbd99e 100644
--- a/Documentation/userspace-api/ioctl/ioctl-number.rst
+++ b/Documentation/userspace-api/ioctl/ioctl-number.rst
@@ -115,6 +115,7 @@ Code  Seq#    Include File                                           Comments
 'B'   00-1F  linux/cciss_ioctl.h                                     conflict!
 'B'   00-0F  include/linux/pmu.h                                     conflict!
 'B'   C0-FF  advanced bbus                                           <mailto:maassen@uni-freiburg.de>
+'B'   00-0F  xen/xenbus_dev.h                                        conflict!
 'C'   all    linux/soundcard.h                                       conflict!
 'C'   01-2F  linux/capi.h                                            conflict!
 'C'   F0-FF  drivers/net/wan/cosa.h                                  conflict!
@@ -134,6 +135,7 @@ Code  Seq#    Include File                                           Comments
 'F'   80-8F  linux/arcfb.h                                           conflict!
 'F'   DD     video/sstfb.h                                           conflict!
 'G'   00-3F  drivers/misc/sgi-gru/grulib.h                           conflict!
+'G'   00-0F  xen/gntalloc.h, xen/gntdev.h                            conflict!
 'H'   00-7F  linux/hiddev.h                                          conflict!
 'H'   00-0F  linux/hidraw.h                                          conflict!
 'H'   01     linux/mei.h                                             conflict!
@@ -176,6 +178,7 @@ Code  Seq#    Include File                                           Comments
 'P'   60-6F  sound/sscape_ioctl.h                                    conflict!
 'P'   00-0F  drivers/usb/class/usblp.c                               conflict!
 'P'   01-09  drivers/misc/pci_endpoint_test.c                        conflict!
+'P'   00-0F  xen/privcmd.h                                           conflict!
 'Q'   all    linux/soundcard.h
 'R'   00-1F  linux/random.h                                          conflict!
 'R'   01     linux/rfkill.h                                          conflict!