Merge tag 'mips_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - loongson64 irq rework

 - dmi support loongson

 - replace setup_irq() by request_irq()

 - jazz cleanups

 - minor cleanups and fixes

* tag 'mips_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (44 commits)
  MIPS: ralink: mt7621: Fix soc_device introduction
  MIPS: Exclude more dsemul code when CONFIG_MIPS_FP_SUPPORT=n
  MIPS/tlbex: Fix LDDIR usage in setup_pw() for Loongson-3
  MIPS: do not compile generic functions for CONFIG_CAVIUM_OCTEON_SOC
  MAINTAINERS: Update Loongson64 entry
  MIPS: Loongson64: Load built-in dtbs
  MIPS: Loongson64: Add generic dts
  dt-bindings: mips: Add loongson boards
  MIPS: Loongson64: Drop legacy IRQ code
  dt-bindings: interrupt-controller: Add Loongson-3 HTPIC
  irqchip: Add driver for Loongson-3 HyperTransport PIC controller
  dt-bindings: interrupt-controller: Add Loongson LIOINTC
  irqchip: loongson-liointc: Workaround LPC IRQ Errata
  irqchip: Add driver for Loongson I/O Local Interrupt Controller
  docs: mips: remove no longer needed au1xxx_ide.rst documentation
  MIPS: Alchemy: remove no longer used au1xxx_ide.h header
  ide: remove no longer used au1xxx-ide driver
  MIPS: Add support for Desktop Management Interface (DMI)
  firmware: dmi: Add macro SMBIOS_ENTRY_POINT_SCAN_START
  MIPS: ralink: mt7621: introduce 'soc_device' initialization
  ...

5 files changed, 179 insertions, 132 deletions

diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml
new file mode 100644
index 000000000000..c8861cbbb8b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,htpic.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/interrupt-controller/loongson,htpic.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Loongson-3 HyperTransport Interrupt Controller
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+description: |
+  This interrupt controller is found in the Loongson-3 family of chips to transmit
+  interrupts from PCH PIC connected on HyperTransport bus.
+
+properties:
+  compatible:
+    const: loongson,htpic-1.0
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 4
+    description: |
+      Four parent interrupts that receive chained interrupts.
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    htintc: interrupt-controller@1fb000080 {
+      compatible = "loongson,htintc-1.0";
+      reg = <0xfb000080 0x40>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+
+      interrupt-parent = <&liointc>;
+      interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
+                    <25 IRQ_TYPE_LEVEL_HIGH>,
+                    <26 IRQ_TYPE_LEVEL_HIGH>,
+                    <27 IRQ_TYPE_LEVEL_HIGH>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
new file mode 100644
index 000000000000..9c6b91fee477
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/interrupt-controller/loongson,liointc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Loongson Local I/O Interrupt Controller
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+
+description: |
+  This interrupt controller is found in the Loongson-3 family of chips as the primary
+  package interrupt controller which can route local I/O interrupt to interrupt lines
+  of cores.
+
+allOf:
+  - $ref: /schemas/interrupt-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: loongson,liointc-1.0
+      - const: loongson,liointc-1.0a
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  interrupts:
+    description:
+      Interrupt source of the CPU interrupts.
+    minItems: 1
+    maxItems: 4
+
+  interrupt-names:
+    description: List of names for the parent interrupts.
+    items:
+      - const: int0
+      - const: int1
+      - const: int2
+      - const: int3
+    minItems: 1
+    maxItems: 4
+
+  '#interrupt-cells':
+    const: 2
+
+  'loongson,parent_int_map':
+    description: |
+      This property points how the children interrupts will be mapped into CPU
+      interrupt lines. Each cell refers to a parent interrupt line from 0 to 3
+      and each bit in the cell refers to a children interrupt fron 0 to 31.
+      If a CPU interrupt line didn't connected with liointc, then keep it's
+      cell with zero.
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32-array
+      - items:
+          minItems: 4
+          maxItems: 4
+
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - 'loongson,parent_int_map'
+
+
+examples:
+  - |
+    iointc: interrupt-controller@3ff01400 {
+      compatible = "loongson,liointc-1.0";
+      reg = <0x3ff01400 0x64>;
+
+      interrupt-controller;
+      #interrupt-cells = <2>;
+
+      interrupt-parent = <&cpuintc>;
+      interrupts = <2>, <3>;
+      interrupt-names = "int0", "int1";
+
+      loongson,parent_int_map = <0xf0ffffff>, /* int0 */
+                                <0x0f000000>, /* int1 */
+                                <0x00000000>, /* int2 */
+                                <0x00000000>; /* int3 */
+
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mips/loongson/devices.yaml b/Documentation/devicetree/bindings/mips/loongson/devices.yaml
new file mode 100644
index 000000000000..74ed4e397a78
--- /dev/null
+++ b/Documentation/devicetree/bindings/mips/loongson/devices.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mips/loongson/devices.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson based Platforms Device Tree Bindings
+
+maintainers:
+  - Jiaxun Yang <jiaxun.yang@flygoat.com>
+description: |
+  Devices with a Loongson CPU shall have the following properties.
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+
+      - description: Generic Loongson3 Quad Core + RS780E
+        items:
+          - const: loongson,loongson3-4core-rs780e
+
+      - description: Generic Loongson3 Octa Core + RS780E
+        items:
+          - const: loongson,loongson3-8core-rs780e
+...
diff --git a/Documentation/mips/au1xxx_ide.rst b/Documentation/mips/au1xxx_ide.rst
deleted file mode 100644
index 2f9c2cff6738..000000000000
--- a/Documentation/mips/au1xxx_ide.rst
+++ /dev/null
@@ -1,130 +0,0 @@
-.. include:: <isonum.txt>
-
-======================
-MIPS AU1XXX IDE driver
-======================
-
-Released 2005-07-15
-
-About
-=====
-
-This file describes the 'drivers/ide/au1xxx-ide.c', related files and the
-services they provide.
-
-If you are short in patience and just want to know how to add your hard disc to
-the white or black list, go to the 'ADD NEW HARD DISC TO WHITE OR BLACK LIST'
-section.
-
-
-License
-=======
-
-:Copyright: |copy| 2003-2005 AMD, Personal Connectivity Solutions
-
-This program is free software; you can redistribute it and/or modify it under
-the terms of the GNU General Public License as published by the Free Software
-Foundation; either version 2 of the License, or (at your option) any later
-version.
-
-THIS SOFTWARE IS PROVIDED ``AS IS`` AND ANY EXPRESS OR IMPLIED WARRANTIES,
-INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
-FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
-BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-
-You should have received a copy of the GNU General Public License along with
-this program; if not, write to the Free Software Foundation, Inc.,
-675 Mass Ave, Cambridge, MA 02139, USA.
-
-Note:
-      for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
-      Interface and Linux Device Driver" Application Note.
-
-
-Files, Configs and Compatibility
-================================
-
-Two files are introduced:
-
-  a) 'arch/mips/include/asm/mach-au1x00/au1xxx_ide.h'
-     contains : struct _auide_hwif
-
-                - timing parameters for PIO mode 0/1/2/3/4
-                - timing parameters for MWDMA 0/1/2
-
-  b) 'drivers/ide/mips/au1xxx-ide.c'
-     contains the functionality of the AU1XXX IDE driver
-
-Following extra configs variables are introduced:
-
-  CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA
-	- enable the PIO+DBDMA mode
-  CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
-	- enable the MWDMA mode
-
-
-Supported IDE Modes
-===================
-
-The AU1XXX IDE driver supported all PIO modes - PIO mode 0/1/2/3/4 - and all
-MWDMA modes - MWDMA 0/1/2 -. There is no support for SWDMA and UDMA mode.
-
-To change the PIO mode use the program hdparm with option -p, e.g.
-'hdparm -p0 [device]' for PIO mode 0. To enable the MWDMA mode use the option
--X, e.g. 'hdparm -X32 [device]' for MWDMA mode 0.
-
-
-Performance Configurations
-==========================
-
-If the used system doesn't need USB support enable the following kernel
-configs::
-
-    CONFIG_IDE=y
-    CONFIG_BLK_DEV_IDE=y
-    CONFIG_IDE_GENERIC=y
-    CONFIG_BLK_DEV_IDEPCI=y
-    CONFIG_BLK_DEV_GENERIC=y
-    CONFIG_BLK_DEV_IDEDMA_PCI=y
-    CONFIG_BLK_DEV_IDE_AU1XXX=y
-    CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
-    CONFIG_BLK_DEV_IDEDMA=y
-
-Also define 'IDE_AU1XXX_BURSTMODE' in 'drivers/ide/mips/au1xxx-ide.c' to enable
-the burst support on DBDMA controller.
-
-If the used system need the USB support enable the following kernel configs for
-high IDE to USB throughput.
-
-::
-
-    CONFIG_IDE_GENERIC=y
-    CONFIG_BLK_DEV_IDEPCI=y
-    CONFIG_BLK_DEV_GENERIC=y
-    CONFIG_BLK_DEV_IDEDMA_PCI=y
-    CONFIG_BLK_DEV_IDE_AU1XXX=y
-    CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
-    CONFIG_BLK_DEV_IDEDMA=y
-
-Also undefine 'IDE_AU1XXX_BURSTMODE' in 'drivers/ide/mips/au1xxx-ide.c' to
-disable the burst support on DBDMA controller.
-
-
-Acknowledgments
-===============
-
-These drivers wouldn't have been done without the base of kernel 2.4.x AU1XXX
-IDE driver from AMD.
-
-Additional input also from:
-Matthias Lenk <matthias.lenk@amd.com>
-
-Happy hacking!
-
-Enrico Walther <enrico.walther@amd.com>
diff --git a/Documentation/mips/index.rst b/Documentation/mips/index.rst
index a93c2f65884c..d5ad8c00f0bd 100644
--- a/Documentation/mips/index.rst
+++ b/Documentation/mips/index.rst
@@ -10,8 +10,6 @@ MIPS-specific Documentation
 
    ingenic-tcu
 
-   au1xxx_ide
-
 .. only::  subproject and html
 
    Indices