summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorRafał Miłecki <rafal@milecki.pl>2021-10-08 22:59:36 +0200
committerLinus Walleij <linus.walleij@linaro.org>2021-10-14 01:09:06 +0200
commit0398adaec3419bdfa93baae70a3b696b4abdd7ad (patch)
tree3cba0e822cf3a31c7a34145ced7cf9b8467b2c66 /Documentation
parent64570fbc14f8d7cb3fe3995f20e26bc25ce4b2cc (diff)
Revert "dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon"
This reverts commit 2ae80900f239484069569380e1fc4340fd6e0089. My rework was unneeded & wrong. It replaced a clear & correct "reg" property usage with a custom "offset" one. Back then I didn't understand how to properly handle CRU block binding. I heard / read about syscon and tried to use it in a totally invalid way. That change also missed Rob's review (obviously). Northstar's pin controller is a simple consistent hardware block that can be cleanly mapped using a 0x24 long reg space. Since the rework commit there wasn't any follow up modifying in-kernel DTS files to use the new binding. Broadcom also isn't known to use that bugged binding. There is close to zero chance this revert may actually cause problems / regressions. This commit is a simple revert. Example binding may (should) be updated / cleaned up but that can be handled separately. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211008205938.29925-1-zajec5@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/mfd/brcm,cru.yaml11
-rw-r--r--Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml23
2 files changed, 19 insertions, 15 deletions
diff --git a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
index fc1317ab3226..28ac60acf4ac 100644
--- a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
+++ b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
@@ -32,13 +32,13 @@ properties:
"#size-cells":
const: 1
- pinctrl:
- $ref: ../pinctrl/brcm,ns-pinmux.yaml
-
patternProperties:
'^clock-controller@[a-f0-9]+$':
$ref: ../clock/brcm,iproc-clocks.yaml
+ '^pin-controller@[a-f0-9]+$':
+ $ref: ../pinctrl/brcm,ns-pinmux.yaml
+
'^thermal@[a-f0-9]+$':
$ref: ../thermal/brcm,ns-thermal.yaml
@@ -73,9 +73,10 @@ examples:
"iprocfast", "sata1", "sata2";
};
- pinctrl {
+ pin-controller@1c0 {
compatible = "brcm,bcm4708-pinmux";
- offset = <0x1c0>;
+ reg = <0x1c0 0x24>;
+ reg-names = "cru_gpio_control";
};
thermal@2c0 {
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
index 470aff599c27..78600a8fe403 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
@@ -17,9 +17,6 @@ description:
A list of pins varies across chipsets so few bindings are available.
- Node of the pinmux must be nested in the CRU (Central Resource Unit) "syscon"
- node.
-
properties:
compatible:
enum:
@@ -27,10 +24,11 @@ properties:
- brcm,bcm4709-pinmux
- brcm,bcm53012-pinmux
- offset:
- description: offset of pin registers in the CRU block
+ reg:
maxItems: 1
- $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ reg-names:
+ const: cru_gpio_control
patternProperties:
'-pins$':
@@ -72,19 +70,24 @@ allOf:
uart1_grp ]
required:
- - offset
+ - reg
+ - reg-names
additionalProperties: false
examples:
- |
cru@1800c100 {
- compatible = "syscon", "simple-mfd";
+ compatible = "simple-bus";
reg = <0x1800c100 0x1a4>;
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
- pinctrl {
+ pin-controller@1c0 {
compatible = "brcm,bcm4708-pinmux";
- offset = <0xc0>;
+ reg = <0x1c0 0x24>;
+ reg-names = "cru_gpio_control";
spi-pins {
function = "spi";