Merge tag 'drm-misc-next-2017-08-08' of git://anongit.freedesktop.org/git/drm-misc into drm-next

UAPI Changes:
- vc4: Add ioctl to allow attaching a label to a bo (Eric)
- Add new format/modifier blob plane property (Ben)
- armada: Use __u32/__u64 instead of uint32_t/uint64_t (Mikko)
- [kinda uapi] fb_helper: Expose display_info size via fb_info (David)

Core Changes:
- Default gem_dumb_[map_offset|destroy] as mmap/destroy implementations (Noralf)
- Simplify atomic properties by removing the helpers and handling in core (Daniel)

Driver Changes:
- stm: Add STM32 DSI controller driver (Phillipe)
- vc4: Add HDMI CEC support (Hans)
- rockchip: Refactor register init & soc version handling (Mark)
- misc: Remove .load_lut, .gamma_set, .gamma_get dead code (Peter)
- dw-hdmi: Add HDMI CEC support (Russell)

Cc: Philippe CORNU <philippe.cornu@st.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Mark yao <mark.yao@rock-chips.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: David Lechner <david@lechnology.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>

* tag 'drm-misc-next-2017-08-08' of git://anongit.freedesktop.org/git/drm-misc: (107 commits)
  drm: Nuke drm_atomic_legacy_backoff
  drm: Nuke drm_atomic_helper_connector_dpms
  drm: Nuke drm_atomic_helper_connector_set_property
  drm: Nuke drm_atomic_helper_plane_set_property
  drm: Nuke drm_atomic_helper_crtc_set_property
  drm: Handle properties in the core for atomic drivers
  drm: Don't update property values for atomic drivers
  drm/omap: Rework the rotation-on-crtc hack
  drm/radeon: Use the drm_driver.dumb_destroy default
  drm/i915: Use the drm_driver.dumb_destroy default
  drm/sti: Use .dumb_map_offset and .dumb_destroy defaults
  drm: bridge: synopsys/dw-hdmi: Provide default configuration function for HDMI 2.0 PHY
  drm/fb-helper: pass physical dimensions to fbdev
  uapi drm/armada_drm.h: use __u32 and __u64 instead of uint32_t and uint64_t
  drm/bridge: dw-hdmi: remove CEC engine register definitions
  drm/bridge: dw-hdmi: add cec driver
  drm/bridge: dw-hdmi: add missing cec_notifier_put
  drm: remove unused and redundant callbacks
  staging: vboxvideo: remove dead gamma lut code
  drm: dw-hdmi-i2s: add missing company name on Copyright
  ...

3 files changed, 109 insertions, 4 deletions

diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
index 9eb3f0a2a078..5d835d9c1ba8 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
@@ -8,8 +8,12 @@ Required properties:
 - compatible: value should be one of the following
 		"rockchip,rk3036-vop";
 		"rockchip,rk3288-vop";
+		"rockchip,rk3368-vop";
+		"rockchip,rk3366-vop";
 		"rockchip,rk3399-vop-big";
 		"rockchip,rk3399-vop-lit";
+		"rockchip,rk3228-vop";
+		"rockchip,rk3328-vop";
 
 - interrupts: should contain a list of all VOP IP block interrupts in the
 		 order: VSYNC, LCD_SYSTEM. The interrupt specifier
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
index 8e1476941c0f..74b5ac7b26d6 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
@@ -1,7 +1,6 @@
 * STMicroelectronics STM32 lcd-tft display controller
 
 - ltdc: lcd-tft display controller host
-  must be a sub-node of st-display-subsystem
   Required properties:
   - compatible: "st,stm32-ltdc"
   - reg: Physical base address of the IP registers and length of memory mapped region.
@@ -13,8 +12,40 @@
   Required nodes:
     - Video port for RGB output.
 
-Example:
+* STMicroelectronics STM32 DSI controller specific extensions to Synopsys
+  DesignWare MIPI DSI host controller
 
+The STMicroelectronics STM32 DSI controller uses the Synopsys DesignWare MIPI
+DSI host controller. For all mandatory properties & nodes, please refer
+to the related documentation in [5].
+
+Mandatory properties specific to STM32 DSI:
+- #address-cells: Should be <1>.
+- #size-cells: Should be <0>.
+- compatible: "st,stm32-dsi".
+- clock-names:
+  - phy pll reference clock string name, must be "ref".
+- resets: see [5].
+- reset-names: see [5].
+
+Mandatory nodes specific to STM32 DSI:
+- ports: A node containing DSI input & output port nodes with endpoint
+  definitions as documented in [3] & [4].
+  - port@0: DSI input port node, connected to the ltdc rgb output port.
+  - port@1: DSI output port node, connected to a panel or a bridge input port.
+- panel or bridge node: A node containing the panel or bridge description as
+  documented in [6].
+  - port: panel or bridge port node, connected to the DSI output port (port@1).
+
+Note: You can find more documentation in the following references
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/reset/reset.txt
+[3] Documentation/devicetree/bindings/media/video-interfaces.txt
+[4] Documentation/devicetree/bindings/graph.txt
+[5] Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
+[6] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
+
+Example 1: RGB panel
 / {
 	...
 	soc {
@@ -34,3 +65,73 @@ Example:
 		};
 	};
 };
+
+Example 2: DSI panel
+
+/ {
+	...
+	soc {
+	...
+		ltdc: display-controller@40016800 {
+			compatible = "st,stm32-ltdc";
+			reg = <0x40016800 0x200>;
+			interrupts = <88>, <89>;
+			resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
+			clocks = <&rcc 1 CLK_LCD>;
+			clock-names = "lcd";
+
+			port {
+				ltdc_out_dsi: endpoint {
+					remote-endpoint = <&dsi_in>;
+				};
+			};
+		};
+
+
+		dsi: dsi@40016c00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "st,stm32-dsi";
+			reg = <0x40016c00 0x800>;
+			clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
+			clock-names = "ref", "pclk";
+			resets = <&rcc STM32F4_APB2_RESET(DSI)>;
+			reset-names = "apb";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi_in: endpoint {
+						remote-endpoint = <&ltdc_out_dsi>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dsi_out: endpoint {
+						remote-endpoint = <&dsi_in_panel>;
+					};
+				};
+
+			};
+
+			panel-dsi@0 {
+				reg = <0>; /* dsi virtual channel (0..3) */
+				compatible = ...;
+				enable-gpios = ...;
+
+				port {
+					dsi_in_panel: endpoint {
+						remote-endpoint = <&dsi_out>;
+					};
+				};
+
+			};
+
+		};
+
+	};
+};
diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
index 1ae42006deea..22af55d06ab8 100644
--- a/Documentation/gpu/todo.rst
+++ b/Documentation/gpu/todo.rst
@@ -108,8 +108,8 @@ This would be especially useful for tinydrm:
   crtc state, clear that to the max values, x/y = 0 and w/h = MAX_INT, in
   __drm_atomic_helper_crtc_duplicate_state().
 
-- Move tinydrm_merge_clips into drm_framebuffer.c, dropping the tinydrm_
-  prefix ofc and using drm_fb_. drm_framebuffer.c makes sense since this
+- Move tinydrm_merge_clips into drm_framebuffer.c, dropping the tinydrm\_
+  prefix ofc and using drm_fb\_. drm_framebuffer.c makes sense since this
   is a function useful to implement the fb->dirty function.
 
 - Create a new drm_fb_dirty function which does essentially what e.g.